to not return without setting a return value when it
can't read a block error or detects a bad cylinder group,
since the caller is expecting a return value.
It will now panic at this point, since the thing
to do in this case would be to return a "bad block"
status to the caller, and the caller will panic
anyways when that happens.
Also updated to panic strings in this routine to read
"ffs_checkblk: ..." instead of "checkblk: ...".
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.
The system boots and can mount UFS filesystems.
Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
Mount_std mounts will not work until the getfsent
library routine is changed.
Reviewed by: various people
Submitted by: Jeffery Hsu <hsu@freebsd.org>
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
Firstly, now our read-ahead clustering is on a file descriptor basis and not
on a per-vnode basis. This will allow multiple processes reading the
same file to take advantage of read-ahead clustering. Secondly, there
previously was a problem with large reads still using the ramp-up
algorithm. Of course, that was bogus, and now we read the entire
"chunk" off of the disk in one operation. The read-ahead clustering
algorithm should use less CPU than the previous also (I hope :-)).
NOTE: THAT LKMS MUST BE REBUILT!!!
makes MADV_SEQUENTIAL much more effective. I suggest that
we start using MADV_SEQUENTIAL on system utilities that mmap
their input files, and the I/O is predominantely sequential.
Below is a test with 'cmp' on two relatively large binary files,
where the files are so large that the caching is ineffective:
+ ls -l t1.xxx t2.xxx
-rw-r--r-- 1 root wheel 65598384 Dec 10 12:13 t1.xxx
-rw-r--r-- 1 root wheel 65598384 Dec 10 12:14 t2.xxx
+ time cmp t1.xxx t2.xxx
3.78user 0.70system 1:33.43elapsed 4%CPU
+ time cmpmadv t1.xxx t2.xxx
4.21user 1.05system 0:30.93elapsed 17%CPU
This change is as a result of an observation made by BDE.
the sd & od drivers. There is also slight changes to fdisk & newfs
in order to comply with different sectorsizes.
Currently sectors of size 512, 1024 & 2048 are supported, the only
restriction beeing in fdisk, which hunts for the sectorsize of
the device.
This is based on patches to od.c and the other system files by
John Gumb & Barry Scott, minor changes and the sd.c patches by
me.
There also exist some patches for the msdos filesys code, but I
havn't been able to test those (yet).
John Gumb (john@talisker.demon.co.uk)
Barry Scott (barry@scottb.demon.co.uk)
We encountered an interesting situation where the superblock for
a file system got written to disk with the "fs_fmod" flag set to
one. It appears that this flag is normally supposed to be cleared
during ffs_sync(), but we experienced a crash, or some other weird
occurrence that left it on the disk set to 1.
Later this partition was mounted read-only... and the fs_fmod
field was never cleared, causing ffs_sync() to panic "rofs mod"
when trying to unmount that filesystem (ffs_vfsops.c: line 790).
fix:
set this bit to 0 when you load the superblock from disk.
(see more complete mail on this to hackers)
1. When a directory is renamed to an existing (empty) directory,
it is possible for the target vnode to become the source vnode
underneath you (because another process may complete the same
rename). It was assumed that this can't happen, and the bogus
errno EINVAL was returned. This was fairly harmless.
Fix: return ENOENT instead, as if the source directory was renamed
a little earlier.
2. The same metamorphosis is possible for non-directories. It was
assumed that this can't happen, and the code for handling "just
removing a link name" happened to be used. This would have worked
except for fatal bugs in the link name removal - the link name was
assumed to still be there, and a null pointer was followed.
Fix: check the result of relookup(). This fixes PR 1930.
Notes:
(a) POSIX seems to say that removing link names shall have no effect.
BSD (4.4Lite2 at least) does something reasonable instead.
(b) The relookup() may find a file unrelated to the original.
Removing this isn't correct. Consider 3 existing files A, B and
C, and concurrent renames: AB = rename(A, B), another AB, and
CA = rename("c", "a"). If rename() is atomic, then only the
following results are possible:
AB, AB (fails), CA: A = original C, B = original A, C = gone
AB, CA, AB: A = gone, B = original C, C = gone
CA, AB, AB (fails): A = gone, B = original C, C = gone
but ufs_rename() can give:
A,AB,CA,B (sorta): A = gone, B = original A, C = gone
This usually doesn't matter, since getting into a race is usually
an error.
---
These fixes should be in 2.1.6 and 2.2.
ufs_read() and ufs_write().
Found by: looking at warnings for comparing the result of lblktosize()
(which is usually daddr_t = long) with file sizes (which are u_quad_t
for ufs). File sizes should probably be off_t's to avoid warnings
when the are compared with file offsets, so the fixed lblktosize()
casts to off_t instead of u_quad_t.
Added definition of smalllblksize(). It is the same as the old
lblksize() and is more efficient for small block numbers on 32-bit
machines.
Use smalllblktosize() instead of its expansion in blksize() and
dblksize(). This keeps the line length short and makes it more
obvious that the shift can't overflow.
It is needed for implementation details but very little of it is
needed for the interface. Include it in the few places that didn't
already include it.
Include <sys/ioccom.h> in <sys/disklabel.h> (as already in
<sys/diskslice.h>) so that all the disk-related headers are almost
self-sufficient.
/*
* Structure defined by POSIX.4 to be like a timeval.
*/
struct timespec {
time_t ts_sec; /* seconds */
long ts_nsec; /* and nanoseconds */
};
The correct names of the fields are tv_sec and tv_nsec.
Reminded by: James Drobina <jdrobina@infinet.com>
is that it doesn't say _what_ did it! (the core dumped console message
is very useful for listing the process name and pid). This adds similar
information.
the file access time update on reads and can be useful in reducing
filesystem overhead in cases where the access time is not important (like
Usenet news spools).
The interface into the "VMIO" system has changed to be more consistant
and robust. Essentially, it is now no longer necessary to call vn_open
to get merged VM/Buffer cache operation, and exceptional conditions
such as merged operation of VBLK devices is simpler and more correct.
This code corrects a potentially large set of problems including the
problems with ktrace output and loaded systems, file create/deletes,
etc.
Most of the changes to NFS are cosmetic and name changes, eliminating
a layer of subroutine calls. The direct calls to vput/vrele have
been re-instituted for better cross platform compatibility.
Reviewed by: davidg
process won't possibly block before filling in the fsnode pointer (v_data)
which might be dereferenced during a sync since the vnode is put on the
mnt_vnodelist by getnewvnode.
Pointed out by Matt Day <mday@artisoft.com>
and B_READ before writing. This was was fatal. They also broke the
clearing of B_INVAL before doing i/o. This didn't actually matter.
Submitted by: mostly by joerg
be called with the directory referenced, and this reference will
be dropped iff relookup() fails, so the value returned must not be
ignored.
Reviewed by: davidg
Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish
overhead for merged cache.
Efficiency improvement for vfs_cluster. It used to do alot of redundant
calls to cluster_rbuild.
Correct the ordering for vrele of .text and release of credentials.
Use the selective tlb update for 486/586/P6.
Numerous fixes to the size of objects allocated for files. Additionally,
fixes in the various pagers.
Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs.
Fixes in the swap pager for exhausted resources. The pageout code
will not as readily thrash.
Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into
page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE),
thereby improving efficiency of several routines.
Eliminate even more unnecessary vm_page_protect operations.
Significantly speed up process forks.
Make vm_object_page_clean more efficient, thereby eliminating the pause
that happens every 30seconds.
Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the
case of filesystems mounted async.
Fix a panic with busy pages when write clustering is done for non-VMIO
buffers.
This fixes PR943.
ffs/ffs_vfsops.c:
ffs_statfs() multiplied by (100 - minfree) as part of calculating the
minfree percentage (complemented in 100%), so with the standard minfree
of 8, it was broken for file systems of size >= 1TB/92 = 11GB. Use the
standard freespace() macro instead. This also fixes a rounding bug (the
"Avail" count was sometimes 1 too small).
ffs/* (not fixed):
The freespace() macro multiplies by minfree, so with the standard
minfree of 8, it is broken for file systems of size >= 1TB/8 = 128GB.
This bug is more serious since it affects block allocation.
ffs/ffs_alloc.c (not fixed):
Ordinary users are sometimes allowed to allocate 1 (partial) block
too many so that the "Avail" count goes negative. E.g., if there is
1 fragment available and the file is fairly large, one more full
block is allocated.
df/df.c:
ufs_df() used/uses essentially the same code as ffs_statfs(), so it
had/has the same bugs.
ufs_df() gratuitously replaced "Avail" counts of < 0 by 0, so it
gave different results for non-mounted file systems in this case.
