is the same as the old MTU. In particular, on Amazon EC2 "T2" instances
without this change, the network interface is reinitialized every 30
minutes due to the MTU being (re)set when a new DHCP lease is obtained,
causing packets to be dropped, along with annoying syslog messages about
the link state changing.
As a side note, the behaviour this commit fixes was responsible for
exposing the locking problems fixed via r318523 and r318631.
Maintainers of other network interface drivers may wish to consider making
the corresponding change; the handling of SIOCSIFMTU does not seem to
exhibit a great deal of consistency between drivers.
MFC after: 1 week
Fragment number field (part of i_seq) is used for AAD calculation;
as a result, without this patch every driver without h/w crypto support
need to clear it before ieee80211_crypto_encap().
Also fixes rtwn(4) A-MPDU Tx with dev.rtwn.%d.hwcrypto tunable
set to 0 (h/w crypto is disabled).
Tested with:
* Intel 6205, STA mode.
* RTL8188EU, STA mode.
Differential Revision: https://reviews.freebsd.org/D10753
It is simply a contigous virtual memory pointer and number of pages.
There is no need to build a linked list here. Just increment pointer
and decrement counter. The only functional difference to old allocator
is that before we gave pages from topmost and down to lowest, and now
we give them in normal ascending order.
While here remove padalign from a mutex that is unused at runtime.
Reviewed by: alc
polling contexts in the LinuxKPI.
After the kqueue() support was added to the LinuxKPI in r319409 the
Linux poll file operation will be used outside the system file polling
callback function, which can cause a NULL-pointer panic inside
selrecord() because curthread->td_sel is set to NULL. This patch moves
the selrecord() call away from poll_wait() and to the system file poll
callback function in the LinuxKPI, which essentially wraps the Linux
one. This is similar to what the cuse(3) module is currently doing.
Refer to sys/fs/cuse/*.[ch] for more details.
MFC after: 1 week
Sponsored by: Mellanox Technologies
mlx4en(4) driver in SRIOV mode.
Place a copy of the destination MAC address in the send WQE only under
SRIOV/eSwitch configuration or when the device is in selftest. This
allows communication between functions on the same host.
PR: 216493
MFC after: 3 days
Sponsored by: Mellanox Technologies
driver. Else if the port is up the resource might still be busy and
the MTT free will fail.
PR: 216493
MFC after: 3 days
Sponsored by: Mellanox Technologies
ioctl(), read() and write() system call handlers. This error code is
internal to the kernel and should not be seen by user-space programs
according to Linux.
Submitted by: Yanko Yankulov <yanko.yankulov@gmail.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
devices. The implementation allows read and write filters to be
created and piggybacks on the poll() file operation to determine when
a filter should trigger. The piggyback mechanism is simply to check
for the EWOULDBLOCK or EAGAIN return code from read(), write() or
ioctl() system calls and then update the kqueue() polling state bits.
The implementation is similar to the one found in the cuse(3) module.
Refer to sys/fs/cuse/*.[ch] for more details.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Add -o [no]verify option to mdconfig (and document in man page.)
Implement GEOM attribute MNT::verified to ask md if the backing vnode is
verified.
Check for MNT::verified in cd9660 mount to flag the mount as MNT_VERIFIED if
the underlying device has been verified.
Reviewed by: rwatson
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D2902
Use the SDHCI_CAN_DRIVE_TYPE_A/_C/_D masks to check for Driver Type support,
instead of using the SDHCI_CTRL2_DRIVER_TYPE_A/_C/_D values which are meant
for setting the Driver Type in the HOST_CONTROL2 register.
Approved by: adrian (mentor), jmcneill
Differential Revision: https://reviews.freebsd.org/D10999
printk_ratelimited() in the LinuxKPI.
While at it fix the inclusion guard of printk.h to be similar to the
rest of the LinuxKPI header files.
MFC after: 1 week
Sponsored by: Mellanox Technologies
task structure to avoid deadlock when tearing down the VM object
during a process exit.
Found by: markj @
MFC after: 1 week
Sponsored by: Mellanox Technologies
it shouldn't be called.
Background:
The Linux VM open operation is called when a new VMA is
created on top of the current VMA. This is done through either mremap
flow or split_vma, usually due to mlock, madvise, munmap and so
on. This is currently not supported by the LinuxKPI.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- Allow "struct linux_file" to be refcounted when its "_file" member
is NULL by using its "f_count" field. The reference counts are
transferred to the file structure when the file descriptor is
installed.
- Add missing vdrop() calls for error cases during open().
- Set the "_file" member of "struct linux_file" during open. This
allows use of refcounting through get_file() and fput() with LinuxKPI
character devices.
MFC after: 1 week
Sponsored by: Mellanox Technologies
This macro allocates memory and, if malloc does not return NULL, copies
data into the new memory. However, it doesn't just check whether malloc
returns NULL. It also checks whether we called malloc with M_NOWAIT. That
is not necessary.
While it may be that malloc() will only return NULL when the M_NOWAIT flag
is set, we don't need to check for this when checking malloc's return
value. Further, in this case, the check was not completely accurate,
because it checked for flags == M_NOWAIT, rather than treating it as a bit
field and checking for (flags & M_NOWAIT).
Reviewed by: ae
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10942
in the icmp6_input() function.
When processing an ICMP6_ECHO_REQUEST, if IP6_EXTHDR_GET fails, it will
set nicmp6 and n to NULL. Therefore, we should condition our modification
to nicmp6 on n being not NULL.
And, when processing an ICMP6_WRUREQUEST in the (mode != FQDN) case, if
m_dup_pkthdr() fails, the code will set n to NULL. However, the very next
line dereferences n. Therefore, when m_dup_pkthdr() fails, we should
discontinue further processing and follow the same path as when m_gethdr()
fails.
Reported by: clang static analyzer
Reviewed by: ae
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10941
response.
Delete an unneeded rate limit for UDP under IPv6. Because ICMP6
messages have their own rate limit, it is unnecessary to apply a
second rate limit to UDP messages.
Reviewed by: glebius
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10387
There could be race condition with TX cleaning routine when cleaning mbufs,
when it was called directly from main sending thread (ena_mq_start).
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10927
Initially, stats were being updated each time OS was requesting for
the first statistic.
To read statistics from hw, condvar was used. cv_timedwait cannot be
called when unsleepable lock is held, and this happens when FreeBSD
is requesting statistic.
Seperate task is reading statistics from NIC each 1 second.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10926
Also, to simplify cleaning routine, reset task is initialized before
allocating statistics and other resources.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10925
Lock only ena_up and ena_down calls in ioctl handler, instead of whole
ioctl. Locking ioctl with sx lock that is sleepable, is not allowed in
some cases, e.g. when multicast options are being changed.
Additional locking was added in deatch function to prevent race condition
with ioctl function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10924
When mbuf chain is too long and device cannot handle that number
of segments in DMA transaction, mbuf chain will be defragmented.
Initially, driver was dropping all mbuf chains that were exceeding
supported number of segments.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10923
Both relative and absolute multitouch modes are supported.
To enable psm(4) evdev support one should:
1. Add `device evdev` and `options EVDEV_SUPPORT` to kernel config file
2. Add hw.psm.elantech_support=1 or hw.psm.synaptics_support=1 to
/boot/loader.conf for activation of absolute mode on touchpads
3. Add kern.evdev.rcpt_mask=12 to /etc/sysctl.conf to enable psm event
sourcing and disable sysmouse
Reviewed by: gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D10265
Tested by: wulf, Jan Kokemueller (Lenovo devs)
is not specified.
Due to the long call chain IPsec code can produce the kernel stack
exhaustion on the i386 architecture. The debugging code usually is not
used, but it requires a lot of stack space to keep buffers for strings
formatting. This patch conditionally defines macros to disable building
of IPsec debugging code.
IPsec currently has two sysctl variables to configure debug output:
* net.key.debug variable is used to enable debug output for PF_KEY
protocol. Such debug messages are produced by KEYDBG() macro and
usually they can be interesting for developers.
* net.inet.ipsec.debug variable is used to enable debug output for
DPRINTF() macro and ipseclog() function. DPRINTF() macro usually
is used for development debugging. ipseclog() function is used for
debugging by administrator.
The patch disables KEYDBG() and DPRINTF() macros, and formatting buffers
declarations when IPSEC_DEBUG is not present in kernel config. This reduces
stack requirement for up to several hundreds of bytes.
The net.inet.ipsec.debug variable still can be used to enable ipseclog()
messages by administrator.
PR: 219476
Reported by: eugen
No objection from: #network
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10869
The Genesys chip is failing when issueing READ_CAP(16) command.
Force a quirk to disable it and use READ_CAP(10) instead.
Also, depending on used firmware, GL3224 can be recognized
either as 'storage device' or 'mass storage class' -
enable both variants in scsi_quirk_table.
Submitted by: Wojciech Macek <wma@semihalf.com>
Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: mav
Differential revision: https://reviews.freebsd.org/D10902
It turned out, that some models of the Atheros PCIe
adapters (e.g. AR983x family) may fail to attach
due to insufficient timeout value.
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: adrian
Differential revision: https://reviews.freebsd.org/D10903
* add EARLY_PRINTF for debugging
* update module list to be much larger
* add random, otherwise well, stuff doesn't work.
* IPFIREWALL_DEFAULT_TO_ACCEPT
Tested:
* AP93 (AR7240 + AR9280)
TODO:
* rename to std.AR724X
* unify the built module list between all of the mips24k/mips74k atheros config files -
now that the HAL, hwpmc, USB, etc are per-chip/per-arch modules it is easy to just
compile them all and only include the ones you care about.
* Map change: create a combined kernel+rootfs image. The instructions I'll post
on the wiki (which will be for a very outdated dev board, but at least will
explain the what/why for posterity) will include how to reset the boot command.
Tested:
* AP93 dev board (AR7240 + AR9280)
When a parent directory lookup is done at the root of a snapshot mounted
under .zfs/snapshot directory, we need to look up that directory in
the parent filesystem. We achieve that by doing a VOP_LOOKUP operation
on a .zfs vnode with "snapshot" as a target name. But previously we
also passed ISDOTDOT flag to the lookup and, because of that, the lookup
actually returned the parent of the .zfs vnode, that is, a root vnode of
the parent filesystem.
Reported by: lev
Tested by: lev
MFC after: 3 days
