Commit Graph

19 Commits

Author SHA1 Message Date
Pedro F. Giffuni
453130d9bf sys/dev: minor spelling fixes.
Most affect comments, very few have user-visible effects.
2016-05-03 03:41:25 +00:00
Matthew D Fleming
103af58f59 Do not define bool/true/false if the symbols already exist.
MFC after:	2 weeks
Sponsored by:	Isilon Systems, LLC
2011-12-12 18:43:24 +00:00
Robert Noland
c5af82e517 Fix build after typo.
Reported by:	Sergey V. Dyatko <sergey.dyatko@gmail.com>
MFC after:	3 days
2010-03-13 18:14:51 +00:00
Robert Noland
b8da61ada5 Add support for Intel Pineview chips, aka IGD
Slightly modified version of the submitted patch.

PR:		143427
Submitted by:	Mamoru Sumida <msumida@mvc.biglobe.ne.jp>
MFC after:	3 days
2010-03-13 11:51:18 +00:00
Robert Noland
139890fd20 Import simple drm memory manager.
This is required for the VIA driver and at least some parts are needed
for GEM.

MFC after:	2 weeks
2010-01-31 14:25:29 +00:00
Robert Noland
33cba7feac Add support for Intel G41 chipset
Submitted by:	Artyom Mirgorodsky <man@email.com.ua>
MFC after:	3 days
2009-10-11 01:54:00 +00:00
Robert Noland
a84a56f28b Some more cleanups for vblank code on Intel.
The Intel 2d driver calls modeset before reinstalling the handler on
a vt switch.  This means that vblank status ends up getting cleared
after it has been setup.  Restore saved values for the pipestat registers
rather than just wiping them out.

MFC after:	3 days
2009-06-25 18:27:08 +00:00
Robert Noland
e23637d17b The G45 docs indicate that all G4X chips use the new framecount register.
Intel agrees with my reading of the docs, make it so for all G4X chips.

The new register also has a 32 bit width as opposed to 24 bits.  Fix
things up so that the counters roll over properly.

MFC after:	3 days
2009-06-20 16:45:14 +00:00
Robert Noland
5a6ba2ffbc Pull in some suspend / resume changes from Intel's code
Tested by:	mav@
MFC after:	3 days
2009-03-19 08:22:56 +00:00
Robert Noland
51e39089c9 Initialize the vblank structures at load time. Previously we did this
at irq install/uninstall time, but when we vt switch, we uninstall the
irq handler.  When the irq handler is reinstalled, the modeset ioctl
happens first.  The modeset ioctl is supposed to tell us that we can
disable vblank interrupts if there are no active consumers.  This will
fail after a vt switch until another modeset ioctl is called via dpms
or xrandr.  Leading to cases where either interrupts are on and can't
be disabled, or worse, no interrupts at all.

MFC after:	2 weeks
2009-02-28 02:37:55 +00:00
Robert Noland
23b90efbcf The GM45 handles vblank differently. Pull the changes from Intel in.
MFC after:	2 Weeks
2009-02-25 20:24:13 +00:00
Robert Noland
dc5c632deb This was part of a sync to the code that Intel is shipping in linux.
- Remove the old TTM interface
	- Move register definitions to i915_reg.h
	- Overhaul the irq handler

MFC after:	2 weeks
2009-02-25 18:44:50 +00:00
Robert Noland
c148ca706e The vblank_swap ioctl was fundamentally race prone. Get rid of it.
MFC after:	2 weeks
2009-02-25 18:22:57 +00:00
Robert Noland
4cd2e9581f resync to git master
This reverts a private patch which is causing issues with many Intel chipsets.
I will review that patch and see what we need to do to fix it up later, but
for the time being, we will just get these chips working again.

This update contains a lot of code cleanup and is post gem merge
(no, we don't have gem support).  It should prove much easier to read the
code now.  A lot of thanks goes to vehemens for that work.  I have adapted
the code to use cdevpriv for tracking per open file data.  That alleviates
the old ugly hack that we used to try and accomplish the task and helped to
clean up the open / close behavior a good bit.  This also replaces the hack
that was put in place a year or so ago to prevent radeons from locking up
with AIGLX enabled.  I have had a couple of radeon testers report that it
still works as expected, though I no longer have radeon hardware to test with
myself.  Other various fixes from the linux crew and Intel, many of
which are muddled in with the gem merge.

Approved by:	jhb (mentor)
Obtained from:	mesa/drm git master
MFC after:	2 weeks
2008-10-03 16:59:11 +00:00
Robert Noland
a2a2d95441 Update drm kernel drivers.
This is a sync to mesa/drm pre-gem, with a few fixes on top of that.
It also contains one local patch supplied by kib@ that I can't apply to
git.master shared code.

Approved by:	flz
Obtained from:	mesa/drm git.master
MFC after:	2 weeks
2008-08-23 20:59:12 +00:00
Eric Anholt
90e545e597 Merge from DRM upstream:
- Add support for Intel 965 Express chipsets.
- Add support for R200 vertex programs, along with minor bugfixes.
- Add support for vblank synchronization to pipe B of Intel hardware
  (laptop screens).
2006-09-07 23:04:47 +00:00
Eric Anholt
72ab0eff0f Update to DRM CVS as of 2006-04-09. The most notable new feature is the updated
Radeon memmap code, which with a new DDX driver and DRI drivers should fix
long-term stability issues with Radeons.  Also adds support for r200's
ATI_fragment_shader, r300 texrect support and texture caching fixes, i915
vblank support and bugfixes, and new PCI IDs.
2006-04-09 20:45:45 +00:00
Eric Anholt
9fb0767374 Update DRM to CVS snapshot as of 2005-11-28. Notable changes:
- S3 Savage driver ported.
- Added support for ATI_fragment_shader registers for r200.
- Improved r300 support, needed for latest r300 DRI driver.
- (possibly) r300 PCIE support, needs X.Org server from CVS.
- Added support for PCI Matrox cards.
- Software fallbacks fixed for Rage 128, which used to render badly or hang.
- Some issues reported by WITNESS are fixed.
- i915 module Makefile added, as the driver may now be working, but is untested.
- Added scripts for copying and preprocessing DRM CVS for inclusion in the
  kernel.  Thanks to Daniel Stone for getting me started on that.
2005-11-28 23:13:57 +00:00
Eric Anholt
b8aa843c63 Update to DRM CVS as of 2005-04-12, bringing many changes:
- Split core DRM routines back into their own module, rather than using the
  nasty templated system like before.
- Development-class R300 support in radeon driver (requires userland pieces, of
  course).
- Mach64 driver (haven't tested in a while -- my mach64s no longer fit in the
  testbox).  Covers Rage Pros, Rage Mobility P/M, Rage XL, and some others.
- i915 driver files, which just need to get drm_drv.c fixed to allow attachment
  to the drmsub device.  Covers i830 through i915 integrated graphics.
- savage driver files, which should require minimal changes to work.  Covers the
  Savage3D, Savage IX/MX, Savage 4, ProSavage.
- Support for color and texture tiling and HyperZ features of Radeon.

Thanks to:	scottl (much p4 handholding)
		Jung-uk Kim (helpful prodding)
PR:		[1] kern/76879, [2] kern/72548
Submitted by:	[1] Alex, lesha at intercaf dot ru
		[2] Shaun Jurrens, shaun at shamz dot net
2005-04-16 03:44:47 +00:00