- Use sched_throw() rather than replicating the same cpu_throw() code for
each architecture. This also allows the scheduler to use any locking it
may want to.
- Use the thread_lock() rather than sched_lock when preempting.
- The scheduler lock is not required to synchronize release_aps.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Rename PCPU_LAZY_INC into PCPU_INC
- Add the PCPU_ADD interface which just does an add on the pcpu member
given a specific value.
Note that for most architectures PCPU_INC and PCPU_ADD are not safe.
This is a point that needs some discussions/work in the next days.
Reviewed by: alc, bde
Approved by: jeff (mentor)
Probabilly, a general approach is not the better solution here, so we should
solve the sched_lock protection problems separately.
Requested by: alc
Approved by: jeff (mentor)
handler is wrapped in a couple of functions - a filter wrapper and an
ithread wrapper. In this case (and just in this case), the filter
wrapper could ask the system to schedule the ithread and mask the
interrupt source if the wrapped handler is composed of just an ithread
handler: modify the "old" interrupt code to make it support
this situation, while the "new" interrupt code is already ok.
Discussed with: jhb
used to return PAGE_SIZE without respect to restrictions of a DMA tag.
This affected all of the busdma load functions that use
_bus_dmamap_loader_buffer() as their back-end.
Reviewed by: scottl
Note on dcons:
To enable dcons in kernel, put the following lines in /boot/loader.conf.
You may also want to enable dcons in /etc/ttys.
boot_multicons="YES"
#Force dcons to be the high-level console if a firewire bus presents.
#hw.firewire.dcons_crom.force_console=1
FireWire/dcons support in loader will come shortly.
(i386/amd64 only)
same way it was enabled for Linux binares in linuxulator.
This allows binaries built with -pie. Many ports auto-detect -fPIE support
in GCC 4.2 and build binaries FreeBSD was unable to run.
referenced outside of mp_machdep.c
- Replace a magic 14 with the newly added IDC_ITID_SHIFT macro.
- Remove the global mp_boot_mid variable as it's not really necessary
and just replacing it with PCPU_GET(mid) doesn't have any impact on
performance once booted.
- Replace PCPU_GET(cpuid) with the curcpu shortcut.
- Replace hardcoded function names in panic strings etc with __func__
so they don't need to be updated when renaming the function.
- Use register_t instead of u_long for variables used to hold the
return value of intr_disable() so we don't need to apply any
knowledge about the actual width of that value here.
- Improve the wording of some comments.
- Fix several style(9) bugs.
- Use __FBSDID in identcpu.c.
- Remove #ifndef SUN4V around global cpu_impl variable; it doesn't
hurt on sun4v for now and once setPQL2() is gone sun4v can stop
sharing identcpu.c with sparc64, making the reminder of this file
also sparc64-only again. [1]
Submitted by: kmacy [1]
iommureg.h (which already began to bitrot) and iommuvar.h from the
sun4v source and adjust some of the source which is shared between
sparc64 and sun4v as appropriate.
vmcnts. This can be used to abstract away pcpu details but also changes
to use atomics for all counters now. This means sched lock is no longer
responsible for protecting counts in the switch routines.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
VM_PHYSSEG_SPARSE depending on whether the physical address space is
densely or sparsely populated with memory. The effect of this
definition is to determine which of two implementations of
vm_page_array and PHYS_TO_VM_PAGE() is used. The legacy
implementation is obtained by defining VM_PHYSSEG_DENSE, and a new
implementation that trades off time for space is obtained by defining
VM_PHYSSEG_SPARSE. For now, all architectures except for ia64 and
sparc64 define VM_PHYSSEG_DENSE. Defining VM_PHYSSEG_SPARSE on ia64
allows the entirety of my Itanium 2's memory to be used. Previously,
only the first 1 GB could be used. Defining VM_PHYSSEG_SPARSE on
sparc64 allows USIIIi-based systems to boot without crashing.
This change is a combination of Nathan Whitehorn's patch and my own
work in perforce.
Discussed with: kmacy, marius, Nathan Whitehorn
PR: 112194
functions with CPUs they apply to only, otherwise default to the
plain C functions. This is modeled in a way so that f.e. a Cheetah
version of these functions can be inserted easily.
the UPA_IMR2 resource is also shared with/a subset of the Schizo PCI
bus B CSR bank. I'm not entirely sure how this previously managed to
escape testing...
vm.kmem_size_min. Useful when using ZFS to make sure that vm.kmem size will
be at least 256mb (for example) without forcing a particular value via vm.kmem_size.
Approved by: njl (mentor)
Reviewed by: alc
GETATTRs being generated - one from lookup()/namei() and the other
from nfs_open() (for cto consistency). This change eliminates the
GETATTR in nfs_open() if an otw GETATTR was done from the namei()
path. Instead of extending the vop interface, we timestamp each attr
load, and use this to detect whether a GETATTR was done from namei()
for this syscall. Introduces a thread-local variable that counts the
syscalls made by the thread and uses <pid, tid, thread syscalls> as
the attrload timestamp. Thanks to jhb@ and peter@ for a discussion on
thread state that could be used as the timestamp with minimal overhead.
sun4v nexus(4) in turn is based on):
o Change nexus(4) to manage the resources of its children so the
respective device drivers don't need to figure them out of OFW
themselves.
o Change nexus(4) to provide the ofw_bus KOBJ interface instead of
using IVARs for supplying the OFW node and the subset of standard
properties of its children. Together with the previous change this
also allows to fully take advantage of newbus in that drivers like
fhc(4), which attach on multiple parent busses, no longer require
different bus front-ends as obtaining the OFW node and properties
as well as resource allocation works the same for all supported
busses. As such this change also is part 4/4 of allowing creator(4)
to work in USIII-based machines as it allows this driver to attach
on both nexus(4) and upa(4). On the other hand removing these IVARs
breaks API compatibility with the powerpc nexus(4) but which isn't
that bad as a) sparc64 currently doesn't share any device driver
hanging off of nexus(4) with powerpc and b) they were no longer
compatible regarding OFW-related extensions at the pci(4) level
since quite some time.
o Provide bus_get_dma_tag methods in nexus(4) and its children in
order to handle DMA tags in a hierarchical way and get rid of the
sparc64_root_dma_tag kludge. Together with the previous two items
this changes also allows to completely get rid of the nexus(4)
IVAR interface. It also includes:
- pushing the constraints previously specified by the nexus_dmatag
down into the DMA tags of psycho(4) and sbus(4) as it's their
IOMMUs which induce these restrictions (and nothing at the
nexus(4) or anything that would warrant specifying them there),
- fixing some obviously wrong constraints of the psycho(4) and
sbus(4) DMA tags, which happened to not actually be used with
the sparc64_root_dma_tag kludge in place and therefore didn't
cause problems so far,
- replacing magic constants for constraints with macros as far
as it is obvious as to where they come from.
This doesn't include taking advantage of the newbus way to get
the parent DMA tags implemented by this change in order to divorce
the IOTSBs of the PCI and SBus IOMMUs or for implementing the
workaround for the DMA sync bug in Sabre (and Tomatillo) bridges,
yet, though.
o Get rid of the notion that nexus(4) (mostly) reflects an UPA bus
by replacing ofw_upa.h and with ofw_nexus.h (which was repo-copied
from ofw_upa.h) and renaming its content, which actually applies to
all of Fireplane/Safari, JBus and UPA (in the host bus case), as
appropriate.
o Just use M_DEVBUF instead of a separate M_NEXUS malloc type for
allocating the device info for the children of nexus(4). This is
done in order to not need to export M_NEXUS when deriving drivers
for subordinate busses from the nexus(4) class.
o Use the DEFINE_CLASS_0() macro to declare the nexus(4) driver so
we can derive subclasses from it.
o Const'ify the nexus_excl_name and nexus_excl_type arrays as well
as add 'associations' and 'rsc', which are pseudo-devices without
resources and therefore of no real interest for nexus(4), to the
former.
o Let the nexus(4) device memory rman manage the entire 64-bit address
space instead of just the UPA_MEMSTART to UPA_MEMEND subregion as
Fireplane/Safari- and JBus-based machines use multiple ranges,
which can't be as easily divided as in the case of UPA (limiting
the address space only served for sanity checking anyway).
o Use M_WAITOK instead of M_NOWAIT when allocating the device info
for children of nexus(4) in order to give one less opportunity
for adding devices to nexus(4) to fail.
o While adapting the drivers affected by the above nexus(4) changes,
change them to take advantage of rman_get_rid() instead of caching
the RIDs assigned to allocated resources, now that the RIDs of
resources are correctly set.
o In iommu(4) and nexus(4) replace hard-coded functions names, which
actually became outdated in several places, in panic strings and
status massages with __func__. [1]
o Use driver_filter_t in prototypes where appropriate.
o Add my copyright to creator(4), fhc(4), nexus(4), psycho(4) and
sbus(4) as I changed considerable amounts of these drivers as well
as added a bunch of new features, workarounds for silicon bugs etc.
o Fix some white space nits.
Due to lack of access to Exx00 hardware, these changes, i.e. central(4)
and fhc(4), couldn't be runtime tested on such a machine. Exx00 are
currently reported to panic before trying to attach nexus(4) anyway
though.
PR: 76052 [1]
Approved by: re (kensmith)
partitioning class that supports multiple schemes. Current
schemes supported are APM (Apple Partition Map) and GPT.
Change all GEOM_APPLE anf GEOM_GPT options into GEOM_PART_APM
and GEOM_PART_GPT (resp).
The ctlreq interface supports verbs to create and destroy
partitioning schemes on a disk; to add, delete and modify
partitions; and to commit or undo changes made.
work when we start requiring this.
- Don't specify an alignment when creating our own parent DMA tag;
the supported DMA engines require no alignment constraint (f.e. the
LANCE child does though) and it's no inherited by the child DMA
tags anyway (which probably is a bug though).
- Fix whitespace nits.
headers in .S directly rather than getting to their macros through
genassym.c/assym.s so there are less headers genassym.c has to be
kept in sync with.
While at it fix some stytle(9) bugs (indentation, prototype format,
sort headers, etc) and remove trailing whitespace.
may also reflect a Fireplane/Safari or JBus bus (or a virtual bus which
in turn reflects a JBus bus or something like that...).
- In the both the sparc64 and sun4v bus_machdep.c use __FBSDID.
- Spell SBus the official way in comments.
- Replace hardcoded function names (all of which were actually outdated)
in panic and status strings with __func__.
- Fix whitespace nits.
and friends along with all hacks required to implement them. None of
the drivers currently built (as part of GENERIC, LINT or modules) on
sparc64 or sun4v and none of those we might want to use there in
future uses them, AFAICT there actually never was a driver hooked up
to the sparc64 or sun4v build that correctly used these functions
(and it looks like that due to a bug read{b,w,l}()/write{b,w,l}() and
the other functions working on a memory handle never actually worked on
sun4v). All they ever were good for on sparc64 and sun4v was erroneously
dragging in dependencies on isa(4) in drivers like f.e. dpt(4), si(4)
and syscons(4) in source files that supposedly were bus-neutral and
hiding issues with drivers like f.e. ng_bt3c(4) that used these
functions with busses other than isa(4) and therefore couldn't work on
these platforms.
bus hanging off from the Fireplane/Safari bus in some USIII machines.
This is part 3/4 of allowing creator(4) to work in these machines.
The little info needed on how to configure the bridge and to work
around the incorrect values contained in the `interrupts' properties
of its children were obtained form OpenSolaris.
The separate bus front-end was inherited from the OpenBSD creator(4),
which at that time had a mainbus(4) (for USI/II machines, which use
an UPA interconnection bus as the nexus) and an upa(4) (for USIII
machines, which use a subordinate/slave UPA bus hanging off from the
Fireplane/Safari interconnection bus) front-end. With FreeBSD and
newbus there is/will be no need to have two separate bus front-ends
for these busses, so we can easily coallapse the shared front-end
and the back-end into a single source file (note that the FreeBSD
creator_upa.c was misnomer anyway; based on what it actually attached
to that should have been creator_nexus.c), actually OpenBSD meanwhile
also has moved to a shared front-end and a single source file. Due
to the low-level console support creator.c also wasn't free from bus
related things before.
While at it, also split sys/sparc64/creator/creator.h into a
sys/dev/fb/creatorreg.h that only contains register macros and move
the structures to the top of sys/dev/fb/creator.c as suggested by
style(9) so creator(4) is no longer scattered over two directories.
- Use OF_decode_addr()/sparc64_fake_bustag() to obtain the bus tags and
handles for the low-level console support instead of hardcoding
support for AFB/FFB hanging off from nexus(4) only. This is part 2/4
of allowing creator(4) to work in USIII machines (which have a UPA
bus hanging off from the Fireplane/Safari bus reflected by the nexus),
which already makes it work as the low-level console there.
- Allocate resources in the bus attach routine regardless of whether
creator(4) is used as for the low-level console and thus the required
bus tags and handles have been already obtained or not so the resources
are marked as taken in the respective RMAN.
- For both obtaining the bus tags and handles for the low-level console
support as well as allocating the corresponding resources in the
regular bus attach routine don't bother to get all for the maximum of
24 register banks but only (for) the two tag/handle pairs required for
providing the video interface for syscons(4) support. If we can't
allocate the rest of them just limit the memory range accessible via
creator_fb_mmap() accordingly.
- Sanity check the memory range spanned by the first and last resources
and the resources in between as far as possible, as the XFree86/Xorg
sunffb(4) expects to be able to access the whole region, even though
the backing resources are actually non-continuous. Limit and check
the memory range accessible via creator_fb_mmap() accordingly.
- Reduce the size of buffers for OFW properties to what they actually
need to hold.
- Rename some tables to creator_<foo> for consistency.
- Also for the sizes in the creator_fb_mmap() mapping table entries use
macros for consistency, add macros for the remaining register banks
for completeness.
nexus (which might or might not reflect an UPA interconnection bus;
accordingly UPA_BUS_SPACE should be renamed to NEXUS_BUS_SPACE at a
later point) and subordinate/slave UPA busses. This is part 1/4 of
allowing creator(4) to work in USIII machines (which have a UPA bus
hanging off from the Fireplane/Safari bus reflected by the nexus).
- Clear the PCI AFSR and status error bits as previous errors still
might be indicated.
- Set up the PCI control and diagnostic registers according to the
capabilities, workarounds, etc of/for specific revisions of the
supported bridges. This includes no longer setting Hummingbird-/
Sabre-specific bits in the PCI control register but preserving
what the firmware has initialized them to like OpenSolaris does.
Previously we were setting these bits according to the example in
the Sabre documentation, which I doubt is appropriate for all
Sabre based designs and especially not for Hummingbirds. This
also includes not enabling bus parking unless the firmware tells
us to.
- Set the PCI latency timer register as this isn't always done by
the firmware.
o Remove a redundant argument from psycho_set_intr() and in this
function check the return value of bus_setup_intr(). [2]
o Let psycho_setup_intr() return ENOMEM instead of 0 when it can't
allocate memory for the interrupt wrapper stub and EINVAL instead
of 0 if it can't find the interrupt vector in the interrupt map.
o Add a workaround for a bug of the Sabre-APB-combination where it
doesn't drain DMA write data for devices behind additional PCI-PCI
bridges underneath the APB PCI-PCI bridge. This workaround (do
things necessary in order to achieve a manual drain when coherency
is required) is currently implemented in psycho_setup_intr() and
psycho_intr_stub() (for easy MFC'ing) and therefore is only applied
for interrupt handlers. This should be moved to psycho(4)-specific
bus_dma_tag_create() and bus_dmamap_sync() methods, respectively,
once this driver is converted to make use of BUS_GET_DMA_TAG(), so
the workaround is also applied for polling(4) callbacks. [3]
o Fix some minor style issues.
Info from: OpenSolaris [1]
Info from: Linux, OpenBSD, OpenSolaris [3]
Suggested by: Coverity Prevent (CID 682) [2]
MFC after: 1 month
firmware (mainly 'pmu' and its 'lomp' dupe found in a couple of
later USII{e,i}-based machines) by checking whether a device with
the same triple of bus number, slot and function already has been
added. This is the simple yet effective approach introduced in
OpenBSD some time ago, but which has the flaw that it assumes
that the device and its dupe(s) found in the OFW device tree are
equal or at least the one encountered first is in some way the
more important one (this is the case with 'pmu' and 'lomp'; the
'pmu' node has couple of properties and children while the 'lomp'
one misses most of these). If there's ever a device/dupe pair
where we don't encounter the more important node first, we'll
probably need to introduce a quirk list in order to add the
desired device but prevent its dupe(s) from being added.
MFC after: 1 week
Make part of John Birrell's KSE patch permanent..
Specifically, remove:
Any reference of the ksegrp structure. This feature was
never fully utilised and made things overly complicated.
All code in the scheduler that tried to make threaded programs
fair to unthreaded programs. Libpthread processes will already
do this to some extent and libthr processes already disable it.
Also:
Since this makes such a big change to the scheduler(s), take the opportunity
to rename some structures and elements that had to be moved anyhow.
This makes the code a lot more readable.
The ULE scheduler compiles again but I have no idea if it works.
The 4bsd scheduler still reqires a little cleaning and some functions that now do
ALMOST nothing will go away, but I thought I'd do that as a separate commit.
Tested by David Xu, and Dan Eischen using libthr and libpthread.
by default for sun4v where it is absolutely required.
This change moves the buffer from struct pcpu to the stack to avoid
using the critical section which created a LOR in a couple of cases
due to interaction with the tty code and kqueue. The LOR can't be
fixed with the critical section and the pcpu buffer can't be used
without the critical section.
Putting the buffer on the stack was my initial solution, but it was
pointed out that the stress on the stack might cause problems
depending on the call path. We don't have a way of creating tests
for those possible cases, so it's best to leave this as an option
for the time being. In time we may get enough data to enable this
option more generally.
retrieval, rather than using pad
- save the fault address in sfar for use by the alignment fixup handler
- mask off the trap number, so the context id doesn't confuse the UT_MAX
comparison
This change fixes alignment fixup handling which is needed for traceroute
to work in spite of its copious unaligned accesses
it as a default.
For the record, the KDTRACE option caused _no_ additional source files
to be compiled in; certainly no CDDL source files. All it did was to
allow existing BSD licensed kernel files to include one or more CDDL
header files.
By removing this from DEFAULTS, the onus is on a kernel builder to add
the option to the kernel config, possibly by including GENERIC and
customising from there. It means that DTrace won't be a feature
available in FreeBSD by default, which is the way I intended it to be.
Without this option, you can't load the dtrace module (which contains
the dtrace device and the DTrace framework). This is equivalent to
requiring an option in a kernel config before you can load the linux
emulation module, for example.
I think it is a mistake to have DTrace ported to FreeBSD, but not
to have it available to everyone, all the time. The only exception
to this is the companies which distribute systems with FreeBSD embedded.
Those companies will customise their systems anyway. The KDTRACE
option was intended for them, and only them.
adds the hooks that DTrace modules register with, and adds a few functions
which have the dtrace_ prefix to allow the DTrace FBT (function boundary
trace) provider to avoid tracing because they are called from the DTtrace
probe context.
Unlike other forms of tracing and debug, DTrace support in the kernel
incurs negligible run-time cost.
I think the only reason why anyone wouldn't want to have kernel support
enabled for DTrace would be due to the license (CDDL) under which DTrace
is released.
as we have no use for that info. Instead let this function return the
keyboard ID and verify at its invocation in sunkbd_configure() that we're
talking to a Sun type 4/5/6 keyboard, i.e. a keyboard supported by this
driver.
- Add an option SUNKBD_EMULATE_ATKBD whose code is based on the respective
code in ukbd(4) and like UKBD_EMULATE_ATSCANCODE causes this driver to
emit AT keyboard/KB_101 compatible scan codes in K_RAW mode as assumed by
kbdmux(4). Unlike UKBD_EMULATE_ATSCANCODE, SUNKBD_EMULATE_ATKBD also
triggers the use of AT keyboard maps and thus allows to use the map files
in share/syscons/keymaps with this driver at the cost of an additional
translation (in ukbd(4) this just is the way of operation).
- Implement an option SUNKBD_DFLT_KEYMAP, which like the equivalent options
of the other keyboard drivers allows to specify the default in-kernel
keyboard map. For obvious reasons this made to only work when also using
SUNKBD_EMULATE_ATKBD.
- Implement sunkbd_check(), sunkbd_check_char() and sunkbd_clear_state(),
which are also required for interoperability with kbdmux(4).
- Implement K_CODE mode and FreeBSD keypad compose.
- As a minor hack define KBD_DFLT_KEYMAP also in the !SUNKBD_EMULATE_ATKBD
case so we can obtain fkey_tab from <dev/kbd/kbdtables.h> rather than
having to duplicate it and #ifdef some more code.
- Don't use the TX-buffer for writing the two command bytes for setting the
keyboard LEDs as this consequently requires a hardware FIFO that is at
least two bytes in depth, which the NMOS-variant of the Zilog SCCs doesn't
have. Thus use an inlined version of uart_putc() to consecutively write
the command bytes (a cleaner approach would be to do this via the soft
interrupt handler but that variant wouldn't work while in ddb(4)). [1]
- Fix some minor style(9) bugs.
PR: 90316 [1]
Reviewed by: marcel [1]
a lock to prevent interspersed strings written from different CPUs
at the same time.
To avoid putting a buffer on the stack or having to malloc one,
space is incorporated in the per-cpu structure. The buffer
size if 128 bytes; chosen because it's the next power of 2 size
up from 80 characters.
String writes to the console are buffered up the end of the line
or until the buffer fills. Then the buffer is flushed to all
console devices.
Existing low level console output via cnputc() is unaffected by
this change. ithread calls to log() are also unaffected to avoid
blocking those threads.
A minor change to the behaviour in a panic situation is that
console output will still be buffered, but won't be written to
a tty as before. This should prevent interspersed panic output
as a number of CPUs panic before we end up single threaded
running ddb.
Reviewed by: scottl, jhb
MFC after: 2 weeks
argument in parentheses so these macros are safe to use and invocations
with an expression as the argument like __bswap32_const(42 << 23 | 13)
work as expected. Additionally, mask all the individually shifted bytes
as appropriate so the bytes which exceed the width of the respective
__bswapN_const() macro in invocations like __bswap16_const(0xdead600d)
are ignored like it's the case with the corresponding __bswapN_var()
function.
MFC after: 3 days
The 'nooption' kernel config entry has to be used to turn KSE off now.
This isn't my preferred way of dealing with this, but I'll defer to
scottl's experience with the io/mem kernel option change and the grief
experienced over that.
Submitted by: scottl@
except sun4v.
This change makes the transition from a default to an option more
transparent and is an attempt to head off all the compliants that are
likely from people who don't read UPDATING, based on experience with
the io/mem change.
Submitted by: scottl@
: # Options for atkbd:
: options ATKBD_DFLT_KEYMAP # specify the built-in keymap
: makeoptions ATKBD_DFLT_KEYMAP=jp.106
[...]
: nooption ATKBD_DFLT_KEYMAP
: nomakeoption ATKBD_DFLT_KEYMAP
(Previously the option was inherited from MI NOTES.) So my tool in
rev. 1.26 reduced this to removing all "ATKBD_DFLT_KEYMAP" lines,
leaving the option effectively disabled as it was before, but since
it's actually supported on sparc64, turn it on now.
since they just duplicated the MI `reset' command. Instead of removing
them, make `reboot' an MI alias for `reboot' since this gives a better
way of killing the `r' alias for `reset'. Remove the `registers' command
that was used to kill the alias.
Turn the powerpc and sparc64 MD `halt' command into an MI command.
A copy of sparc64/db_interface.c grew in sun4v just after I found the
extra reboot commands. It has not been changed, and is now not
identical. Duplicated commands come out duplicated in ddb's online
help, but cause large problems when used (e.g., on i386's with 2 halt's
and an hwatch, typing h doesn' give the expected message about an
ambiguous command, but hangs like the halt command or a looping parseri
would).
unsuspecting users.
- Add a comment in NOTES about experimental status of SCHED_ULE.
- Make warning about experimental status in sched_ule(4) a bit
stronger.
Suggested and reviewed by: dougb
Discussed on: developers
MFC after: 3 days
Submitted by:
Reviewed by:
Approved by:
Obtained from:
MFC after:
Security:
Move the relocation definitions to the common elf header so that DTrace
can use them on one architecture targeted to a different one.
Add the additional ELF types defines in Sun's "Linker and Libraries"
manual.
pmap_protect(), and pmap_copy() have optimizations for regions
larger than PMAP_TSB_THRESH (which works out to 16MB). This
caused a panic in tsb_foreach for kernel mappings, since
pm->pm_tsb is NULL in that case. This fix teaches tsb_foreach
to use the kernel's tsb in that case.
Submitted by: Michael Plass
MFC after: 3 days
for a bit before retrying to resend an IPI in order to avoid
deadlocks if the other CPU is also trying to send one.
OpenSolaris uses a delay of 1 microsecond here but waiting 2
microseconds with interrupts enabled like Linux does shouldn't
hurt but is a bit safer.
MFC after: 1 day
Originally, I had adopted sparc64's name, pmap_clear_write(), for the
function that is now pmap_remove_write(). However, this function is more
like pmap_remove_all() than like pmap_clear_modify() or
pmap_clear_reference(), hence, the name change.
The higher-level rationale behind this change is described in
src/sys/amd64/amd64/pmap.c revision 1.567. The short version is that I'm
trying to clean up and fix our support for execute access.
Reviewed by: marcel@ (ia64)
and pc98 MD files. Remove nodevice and nooption lines specific
to sio(4) from ia64, powerpc and sparc64 NOTES. There were no
such lines for arm yet.
sio(4) is usable on less than half the platforms, not counting
a future mips platform. Its presence in MI files is therefore
increasingly becoming a burden.
mark system calls as being MPSAFE:
- Stop conditionally acquiring Giant around system call invocations.
- Remove all of the 'M' prefixes from the master system call files.
- Remove support for the 'M' prefix from the script that generates the
syscall-related files from the master system call files.
- Don't explicitly set SYF_MPSAFE when registering nfssvc.
implementations and adjust some of the checks while I'm here:
- Add a new check to make sure we don't return from a syscall in a critical
section.
- Add a new explicit check before userret() to make sure we don't return
with any locks held. The advantage here is that we can include the
syscall number and name in syscall() whereas that info is not available
in userret().
- Drop the mtx_assert()'s of sched_lock and Giant. They are replaced by
the more general checks just added.
MFC after: 2 weeks
system's machine-dependent and machine-independent layers. Once
pmap_clear_write() is implemented on all of our supported
architectures, I intend to replace all calls to pmap_page_protect() by
calls to pmap_clear_write(). Why? Both the use and implementation of
pmap_page_protect() in our virtual memory system has subtle errors,
specifically, the management of execute permission is broken on some
architectures. The "prot" argument to pmap_page_protect() should
behave differently from the "prot" argument to other pmap functions.
Instead of meaning, "give the specified access rights to all of the
physical page's mappings," it means "don't take away the specified
access rights from all of the physical page's mappings, but do take
away the ones that aren't specified." However, owing to our i386
legacy, i.e., no support for no-execute rights, all but one invocation
of pmap_page_protect() specifies VM_PROT_READ only, when the intent
is, in fact, to remove only write permission. Consequently, a
faithful implementation of pmap_page_protect(), e.g., ia64, would
remove execute permission as well as write permission. On the other
hand, some architectures that support execute permission have
basically ignored whether or not VM_PROT_EXECUTE is passed to
pmap_page_protect(), e.g., amd64 and sparc64. This change represents
the first step in replacing pmap_page_protect() by the less subtle
pmap_clear_write() that is already implemented on amd64, i386, and
sparc64.
Discussed with: grehan@ and marcel@
install custom pager functions didn't actually happen in practice (they
all just used the simple pager and passed in a local quit pointer). So,
just hardcode the simple pager as the only pager and make it set a global
db_pager_quit flag that db commands can check when the user hits 'q' (or a
suitable variant) at the pager prompt. Also, now that it's easy to do so,
enable paging by default for all ddb commands. Any command that wishes to
honor the quit flag can do so by checking db_pager_quit. Note that the
pager can also be effectively disabled by setting $lines to 0.
Other fixes:
- 'show idt' on i386 and pc98 now actually checks the quit flag and
terminates early.
- 'show intr' now actually checks the quit flag and terminates early.
in 1999, and there are changes to the sysctl names compared to PR,
according to that discussion. The description is in sys/conf/NOTES.
Lines in the GENERIC files are added in commented-out form.
I'll attach the test script I've used to PR.
PR: kern/14584
Submitted by: babkin
an explicit comment that it's needed for the linuxolator. This is not the
case anymore. For all other architectures there was only a "KEEP THIS".
I'm (and other people too) running a COMPAT_43-less kernel since it's not
necessary anymore for the linuxolator. Roman is running such a kernel for a
for longer time. No problems so far. And I doubt other (newer than ia32
or alpha) architectures really depend on it.
This may result in a small performance increase for some workloads.
If the removal of COMPAT_43 results in a not working program, please
recompile it and all dependencies and try again before reporting a
problem.
The only place where COMPAT_43 is needed (as in: does not compile without
it) is in the (outdated/not usable since too old) svr4 code.
Note: this does not remove the COMPAT_43TTY option.
Nagging by: rdivacky
There is a race with the current locking scheme and removing
it should have no measurable performance impact.
This fixes page faults leading to panics in pmap_enter_quick_locked()
on amd64/i386.
Reviewed by: alc,jhb,peter,ps
moving the typedef of bus_space_tag_t from sys/sparc64/include/bus.h
to sys/sparc64/include/_bus.h. This brings sparc64 in sync with the
other platforms and fixes the compilation of drivers which include
<sys/rman.h> before <machine/bus.h> after sys/sys/rman.h rev. 1.34.
- Remove the definition of bus_type_t from sys/sparc64/include/_bus.h
as it's unused since sys/sparc64/include/bus.h rev. 1.6 and
sys/sparc64/sparc64/bus_machdep.c rev. 1.3.
- Remove some pointless comments.
the arm to compile without all the extras that don't appear, at least
not in the flavors of ARM I deal with. This helps us save about 100k.
If I've botched the available devices on a platform, please let me
know and I'll correct ASAP.
Map the device memory belonging to resources of type SYS_RES_MEMORY into
KVA upon activation so that rman_get_virtual() works as expected.
- In sbus_alloc_resource() checking whether toffs is 0 as an indication
that no applicable child range was found isn't appropriate as it's
perfectly valid for the requested SYS_RES_MEMORY resource to start at
the beginning of a child range. So check for the RMAN still being NULL
instead.
- As a minor runtime speed optimization break out of the loop where we
search for the applicable child range in sbus_alloc_resource() as soon
as it's found.
- Let sbus_setup_intr() return ENOMEM rather than 0 if it can't allocate
memory for the interrupt clearing info.
- Actually do what the comment in sbus_setup_intr() says and disable the
respective interrupt while fiddling with it.
- Remove some superfluous INTVEC() around inr, which already only contains
the interrupt vector, in sbus_setup_intr().
- While here, fix a style(9) bug in sbus_setup_intr() (don't use function
calls in initializers).
The first two changes are required for a CG6 driver.
MFC after: 2 weeks
Retire pmap_track_modified(). We no longer need it because we do not
create managed mappings within the clean submap. To prevent regressions,
add assertions blocking the creation of managed mappings within the clean
submap.
above what's used for fast interrupts, only interrupts with the level of
the interrupt which led to calling intr_fast() (which is used with both
fast and ithread interrupts) are blocked while in that function. Thus
intr_fast() can be preempted by a fast interrupt (which are of a higher
level than ithread interrupts) while servicing an ithread interrupt. This
can lead to a stale pointer to the head of the active interrupt requests
list when back in the ithread interrupt invocation of intr_fast(), in turn
resulting in corruption of the interrupt request lists and consequently
in a panic. Solve this be turning off interrupts in intr_fast() before
reading the pointer to the head of the active list rather than after. [1]
- Add a KASSERT in intr_fast() which asserts that ir_func is non-zero before
calling it. [1]
- Increment interrupt stats after calling the handlers rather than before.
This reduces the delay until direct and fast handlers are serviced, in my
testings by 30% on average for the direct tick interrupt handler, in turn
resulting in less clock drift.
PR: 94778 [1]
Submitted by: Andrew Belashov [1]
MFC after: 2 weeks
PCI devices apparently was changed from a special deferred trap with TPC
pointing to the membar #Sync following the failing load/store instruction
to a precise trap with TPC pointing to the failing load/store instruction.
Thus remove the check the check whether TPC points to a membar #Sync in
case of a data access trap as it's off-by-one for USIII CPUs and it should
be sufficient to check whether the trap happend while in fasword*() to
properly detect traps caused by peeking/poking. This also corresponds to
what other OSs do. Note that also only the USIIi manual suggests to check
the TPC for such traps while the USII one doesn't (in the public USIII
manual device peeking/poking isn't mentioned at all).
PCB in which the context of stopped CPUs is stored. To access this
PCB from KDB, we introduce a new define, called KDB_STOPPEDPCB. The
definition, when present, lives in <machine/kdb.h> and abstracts
where MD code saves the context. Define KDB_STOPPEDPCB on i386,
amd64, alpha and sparc64 in accordance to previous code.
- Use FBSDID in trap.c
- Make the global trap_sig[] static as it's not used outside of trap.c.
- In sendsig() remove an unused variable.
- In trap() sync with the other archs; for fast data access MMU miss and
data access protection traps set ksi_addr to the SFAR reg which contains
the faulting address and otherwise to the TPC reg. Generally the TCP reg
contains the address of the instruction that caused the exception, except
for fast instruction access traps (and some others; more refinement may
be needed here) it also contains the faulting address.
Previously sendsig() always set si_addr to the SFAR reg which is wrong
for most traps.
- In sendsig() add support for FreeBSD old-style signals.
These changes are inspired by kmacy's sun4v changes and allow libsigsegv
to build on FreeBSD/sparc64, but it doesn't pass all checks and tests it
actually should, yet.
MFC after: 5 days
foreign per-CPU pages in cpu_ipi_send() in order to get the module IDs
of the other CPUs can cause a page fault. If this happens when doing a
TLB shootdown while dealing with another page fault this causes a panic
due to the recursive page fault. As I don't spot other code that assumes
or requires that accessing foreign per-CPU pages must not page fault
solve this by adding a statically allocated (and therefore locked in the
kernel pages) array which establishes a FreeBSD CPU ID -> module ID
relation and use that in cpu_ipi_selected() (instead of statically
allocating the per-CPU pages which would just waste memory on say a dual
CPU machine as sun4u theoretically supports up to 128 CPUs or wasting
dTLB slots for the foreign per-CPU pages). [1]
- Fix a potential race in cpu_ipi_send(); as we don't serialize the access
to cpu_ipi_selected() between MI and MD use (only MI-MI and MD-MD) we
might catch the NACK bit caused by sending another IPI. Solve this by
checking the NACK bit in the contents of the interrupt dispatch status
reg read while interrupts were still turned off instead of reading that
reg anew after interrupts were turned on again. This is also what the
CPU docs suggest to do.
- Add a workaround for the SpitFire erratum #54 bug (affecting interrupt
dispatch). While public info regarding what this CPU bug actually causes
is not available testing shows that with the workaround in place it's
less likely to get a "couldn't send ipi" panic, it doesn't solve these
panics entirely though. [2]
Reported by: kris [1]
Some clue from: kmacy [1]
Info from: Linux, OpenSolaris [2]
Additional testing by: kris
MFC after: 3 days
as we have to call tick_init() before cninit() in order to provide the
low-level console drivers with a working DELAY() which in turn means we
cannot use panic() in tick_init().
- s,to high, too high, in the panic string
Inspired by: kmacy's sun4v changes
MFC after: 3 days
when option DEBUG_LOCKS is used. Trap frames are determined by checking
whether the caller was one of the tl0_*() or tl1_*() asm functions via
a newly added pair of dummy symbols in exception.S which mark the begin
and end of these functions. The tl_trap_* pair marks those in the special
.trap section and the tl_text_* in the regular .text section. Because
of their performance penalty db_search_symbol()/db_symbol_values() and
linker_ddb_search_symbol()/linker_ddb_symbol_values() aren't used here
for determining the caller, with db_search_symbol()/db_symbol_values()
additionally not being reentrant.
- For consistency, change db_backtrace() to also use the new markers for
determining the tl0_*() and tl1_*() asm functions instead of bcmp()'ing
the symbol name.
- Use FBSDID in db_trace.c.
PR: 93226
Based on a patch by: Antoine Brodin <antoine.brodin@laposte.net>
Ok'ed by: jhb
pages, not a count of bytes. The sysctl handler for hw.realmem already
uses ctob() to convert realmem from pages to bytes. Thus, on archs that
were storing a byte count in the realmem variable, hw.realmem was inflated.
Reported by: Valerio daelli valerio dot daelli at gmail dot com (alpha)
MFC after: 3 days
Keep accounting time (in per-cpu) cputicks and the statistics counts
in the thread and summarize into struct proc when at context switch.
Don't reach across CPUs in calcru().
Add code to calibrate the top speed of cpu_tickrate() for variable
cpu_tick hardware (like TSC on power managed machines).
Don't enforce monotonicity (at least for now) in calcru. While the
calibrated cpu_tickrate ramps up it may not be true.
Use 27MHz counter on i386/Geode.
Use TSC on amd64 & i386 if present.
Use tick counter on sparc64
Rename struct thread's td_sticks to td_pticks, we will need the
other name for more appropriately named use shortly. Reduce it
from uint64_t to u_int.
Clear td_pticks whenever we enter the kernel instead of recording
its value as reference for userret(). Use the absolute value of
td->pticks in userret() and eliminate third argument.
Keep track of time spent by the cpu in various contexts in units of
"cputicks" and scale to real-world microsec^H^H^H^H^H^H^H^Hclock_t
only when somebody wants to inspect the numbers.
For now "cputicks" are still derived from the current timecounter
and therefore things should by definition remain sensible also on
SMP machines. (The main reason for this first milestone commit is
to verify that hypothesis.)
On slower machines, the avoided multiplications to normalize timestams
at every context switch, comes out as a 5-7% better score on the
unixbench/context1 microbenchmark. On more modern hardware no change
in performance is seen.
in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as
it should work just fine with the AMD PCnet family of chips on all archs
but is not yet meant to replace lnc(4). If a kernel includes all of le(4),
lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now.
- Like lsi64854_scsi_intr() return -1 in case there was a DMA error so
the caller can distinguish it from a normal interrupt and leave the
reset of the DMA engine to the caller so we don't kill any state there.
- Move the static 'dodrain' flag to struct lsi64854_softc as there can
be more than one LSI64854 used for a LANCE in a system and reset it
again once draining the E-cache is done so we don't keep draining the
cache with every interrupt.
- Remove calling sc->sc_intrchain(), we will call lsi64854_enet_intr()
via sc->intr() in the interrupt handler of the LANCE driver and not
use it in chained mode.
o lsi64854_pp_intr():
- Like lsi64854_scsi_intr() return -1 in case there was a DMA error so
the caller can distinguish it from a normal interrupt.
o Remove the no longer used sc_intrchain* from struct lsi64854_softc.
o Make lsi64854_reset(), lsi64854_setup*() and lsi64854_*_intr() static
to lsi64854.c as we do and will only call them via the respective
function pointers in struct lsi64854_softc.
o While here fix style(9) bugs (variable definition inside a nested scope).
interrupt handler for the LANCE devices and remove dma_setup_intr(). We
just can't completely ignore the DMA engine in a LANCE driver anyway and
calling the DMA engine interrupt handler in the LANCE driver directly
allows to cover it by the LANCE driver lock.
and resume methods so these events propagate through the device driver
hierarchy.
- In dma(4) enable the chaining of the DMA engine interrupt handler for
the LANCE devices via a dma_setup_intr(). This was commented out before
as I was unsure whether I'd use it but this is probably cleaner than
fiddling with the DMA engine interrupt in the LANCE driver directly.
- In ebus_setup_dinfo() free 'intrs' instead of 'reg' twice in case
setting up a child fails due to routing one of its interrupts fails. [1]
Found by: Coverity Prevent [1]
MFC after: 3 days
operands are consumed so use the appropriate constraint modifier.
Before this change GCC used one register for both an input and an
unrelated output operand of in_addword(), causing the input to be
overwritten before it was consumed and thus breaking in_addword().
For in_cksum_hdr() and in_pseudo() this change is more or less
cosmetic.
- Fix a misspelling in a nearby comment.
Reported & tested by: yongari
MFC after: 1 week
to COMPAT_43TTY.
Add COMPAT_43TTY to NOTES and */conf/GENERIC
Compile tty_compat.c only under the new option.
Spit out
#warning "Old BSD tty API used, please upgrade."
if ioctl_compat.h gets #included from userland.
various pcib drivers to use their own private devclass_t variables for
their modules.
- Use the DEFINE_CLASS_0() macro to declare drivers for the various pcib
drivers while I'm here.
- provide an interface (macros) to the page coloring part of the VM system,
this allows to try different coloring algorithms without the need to
touch every file [1]
- make the page queue tuning values readable: sysctl vm.stats.pagequeue
- autotuning of the page coloring values based upon the cache size instead
of options in the kernel config (disabling of the page coloring as a
kernel option is still possible)
MD changes:
- detection of the cache size: only IA32 and AMD64 (untested) contains
cache size detection code, every other arch just comes with a dummy
function (this results in the use of default values like it was the
case without the autotuning of the page coloring)
- print some more info on Intel CPU's (like we do on AMD and Transmeta
CPU's)
Note to AMD owners (IA32 and AMD64): please run "sysctl vm.stats.pagequeue"
and report if the cache* values are zero (= bug in the cache detection code)
or not.
Based upon work by: Chad David <davidc@acns.ab.ca> [1]
Reviewed by: alc, arch (in 2004)
Discussed with: alc, Chad David, arch (in 2004)
with flags bitfield and set BI_CAN_EXEC_DYN flag for all brands that usually
allow executing elf dynamic binaries (aka shared libraries). When it is
requested to execute ET_DYN elf image check if this flag is on after we
know the elf brand allowing execution if so.
PR: kern/87615
Submitted by: Marcin Koziej <creep@desk.pl>
passing a pointer to an opaque clockframe structure and requiring the
MD code to supply CLKF_FOO() macros to extract needed values out of the
opaque structure, just pass the needed values directly. In practice this
means passing the pair (usermode, pc) to hardclock() and profclock() and
passing the boolean (usermode) to hardclock_cpu() and hardclock_process().
Other details:
- Axe clockframe and CLKF_FOO() macros on all architectures. Basically,
all the archs were taking a trapframe and converting it into a clockframe
one way or another. Now they can just extract the PC and usermode values
directly out of the trapframe and pass it to fooclock().
- Renamed hardclock_process() to hardclock_cpu() as the latter is more
accurate.
- On Alpha, we now run profclock() at hz (profhz == hz) rather than at
the slower stathz.
- On Alpha, for the TurboLaser machines that don't have an 8254
timecounter, call hardclock() directly. This removes an extra
conditional check from every clock interrupt on Alpha on the BSP.
There is probably room for even further pruning here by changing Alpha
to use the simplified timecounter we use on x86 with the lapic timer
since we don't get interrupts from the 8254 on Alpha anyway.
- On x86, clkintr() shouldn't ever be called now unless using_lapic_timer
is false, so add a KASSERT() to that affect and remove a condition
to slightly optimize the non-lapic case.
- Change prototypeof arm_handler_execute() so that it's first arg is a
trapframe pointer rather than a void pointer for clarity.
- Use KCOUNT macro in profclock() to lookup the kernel profiling bucket.
Tested on: alpha, amd64, arm, i386, ia64, sparc64
Reviewed by: bde (mostly)
to search for a specific extended capability. If the specified capability
is found for the given device, then the function returns success and
optionally returns the offset of that capability. If the capability is
not found, the function returns an error.
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
- Move vtophys() macros next to vtopte() where vtopte() exists to match
comments above vtopte().
- Remove references to the alternate address space in the comment above
vtopte(). amd64 never had the alternate address space, and i386 lost it
prior to PAE support being added.
- s/entires/entries/ in comments.
Reviewed by: alc
KTR_* class macros via genassym.c. Together with sys/sys/ktr.h
rev. 1.34 this has the desired side-effect of providing a default
value for KTR_COMPILE. Thus this fixes warnings from -Wundef
regarding KTR_COMPILE not being defined for .S files.
Requested by: ru
Reviewed by: ru
MACHINE_ARCH and MACHINE). Their purpose was to be able to test
in cpp(1), but cpp(1) only understands integer type expressions.
Using such unsupported expressions introduced a number of subtle
bugs, which were discovered by compiling with -Wundef.
from sys/sparc64/include/ofw_upa.h to sys/sparc64/pci/ofw_pci.h and
rename them to struct ofw_pci_ranges and OFW_PCI_RANGE_* respectively.
This ranges struct only applies to host-PCI bridges but no to other
bridges found on UPA. At the same time it applies to all host-PCI
bridges regardless of whether the interconnection bus is Fireplane/
Safari, JBus or UPA.
- While here rename the PCI_CS_* macros in sys/sparc64/pci/ofw_pci.h
to OFW_PCI_CS_* in order to be consistent and change this header to
use uintXX_t instead of u_intXX_t.
the bridge (PCI bus A or B) we are attaching to rather than registering
both handlers at once when attaching to the first half we encounter.
This is a bit cleaner as it corresponds to which PCI bus error interrupt
actually is assigned to the respective half by the OFW and allows to
collapse both PCI bus error interrupt handlers into one function easily.
- Use the actual RID of the respective interrupt resource as index into
sc_irq_res and also use it when allocating the resource. For now this
is a bit cleaner and will be mandatory later on.
- According to OpenSolaris the spare hardware interrupt is used as the
over-temperature interrupt in systems with Psycho bridges. Unlike as
with the SBus-based workstations I didn't manage to trigger it when
covering the fan outlets of an U60 but better be safe than sorry and
register a handler anyway.
MFC after: 1 month
bug by explaining what the problem is and how the workaround works.
- Fix some cosmetics nits, mainly properly terminate sentences in comments,
which I missed when backporting the style changes to psycho(4) in psycho.c
rev. 1.54 due to lack of corresponding code.
- The "USIIe version of the Sabre bridge" actually is termed "Hummingbird";
name it as such in comments and messages.
INO) for incorrect interrupt map entries on E250 machines. These
incorrect entries caused the INO of the on-board HME to be also
assigned to the second on-board NS16550 and to the on-board printer
port controller. Further down the road caused hme(4) to fail to attach
to the on-board HME in FreeBSD 5 and 6 as INTR_FAST and non-INTR_FAST
handlers can't share the same IRQ there (it's unknown what whould
happen in -CURRENT now that INTR_FAST and non-INTR_FAST handlers can
share an IRQ but I'd expect funny problems with uart(4)).
- Make sure there are exactly 4 PCI ranges instead of just checking
that the bridge has a 'ranges' property in the OFW device tree at all.
Besides the fact that currently the 64bit memory range isn't used by
this driver it we can't really work with less than 4 ranges and don't
have memory for more than 4 bus handles for the ranges in the softc.
- Remove sc_range and sc_nrange from softc; for the bridges supported
by this driver we no longer need to know the ranges besides the bus
handles obtained from them once this driver is attached. That way we
also can free the memory allocated for sc_range during attach again.
- Remove sc_dvmabase from the softc and pass it to psycho_iommu_init()
via an additional argument as we no longer need to know the DVMA base
in this driver once the IOMMU is initialized.
- Remove sc_dmatag from the softc, there isn't much sense in keeping
the nexus dma tag around locally.
PR: 88279 [1]
Info from: OpenSolaris [1]
Tested by: kensmith [1]
MFC after: 1 month
between this driver and other Host-PCI bridge drivers based on this one:
- Make the code fit into 80 columns.
- Make the code adhere style(9) (don't use function calls in initializers,
use uintXX_t instead of u_intXX_t, add missing prototypes, ...).
- Remove unused and superfluous struct declaration, softc member, casts,
includes, etc.
- Use FBSDID.
- Sprinkle const.
- Try to make comments and messages consistent in style throughout the
driver.
- Use convenience macros for the number of interrupts and ranges of the
bridge.
- Use __func__ instead of hardcoded function names in panic strings and
error messages. Some of the hardcoded function names actually were
outdated through moving code around. [1]
- Rename softc members related to the PCI side of the bridge to sc_pci_*
in order to make it clear which side of the bridge they refer to (so
stuff like sc_bushandle vs. sc_bh is less confusing while reading the
code).
PR: 76052 [1]
ofw_bus_gen_get_*() for providing the ofw_bus KOBJ interface in order
to reduce code duplication.
- While here sync the various sparc64 bus drivers a bit (handle failure
to attach a child gracefully instead of panicing, move the printing
of child resources common to bus_print_child() and bus_probe_nomatch()
implementations of a bus into a <bus>_print_res() function, ...) and
fix some minor bugs and nits (plug memory leaks present when attaching
a bus or child device fails, remove unused struct members, ...).
Additional testing by: kris (central(4) and fhc(4))
via the DEFAULTS kernel configs. This allows folks to turn it that option
off in the kernel configs if desired without having to hack the source.
This is especially useful since PUC_FASTINTR hangs the kernel boot on my
ultra60 which has two uart(4) devices hung off of a puc(4) device.
I did not enable PUC_FASTINTR by default on powerpc since powerpc does not
currently allow sharing of INTR_FAST with non-INTR_FAST like the other
archs.
'device mem' over from GENERIC to DEFAULTS to be consistent with i386 and
amd64. Additionally, on ia64 enable ACPI by default since ia64 requires
acpi.
reclamation synchronously from get_pv_entry() instead of
asynchronously as part of the page daemon. Additionally, limit the
reclamation to inactive pages unless allocation from the PV entry zone
or reclamation from the inactive queue fails. Previously, reclamation
destroyed mappings to both inactive and active pages. get_pv_entry()
still, however, wakes up the page daemon when reclamation occurs. The
reason being that the page daemon may move some pages from the active
queue to the inactive queue, making some new pages available to future
reclamations.
Print the "reclaiming PV entries" message at most once per minute, but
don't stop printing it after the fifth time. This way, we do not give
the impression that the problem has gone away.
Reviewed by: tegge
current context in the IPI_STOP handler so that we can get accurate stack
traces of threads on other CPUs on these two archs like we do now on i386
and amd64.
Tested on: alpha, sparc64
and increase flexibility to allow various different approaches to be tried
in the future.
- Split struct ithd up into two pieces. struct intr_event holds the list
of interrupt handlers associated with interrupt sources.
struct intr_thread contains the data relative to an interrupt thread.
Currently we still provide a 1:1 relationship of events to threads
with the exception that events only have an associated thread if there
is at least one threaded interrupt handler attached to the event. This
means that on x86 we no longer have 4 bazillion interrupt threads with
no handlers. It also means that interrupt events with only INTR_FAST
handlers no longer have an associated thread either.
- Renamed struct intrhand to struct intr_handler to follow the struct
intr_foo naming convention. This did require renaming the powerpc
MD struct intr_handler to struct ppc_intr_handler.
- INTR_FAST no longer implies INTR_EXCL on all architectures except for
powerpc. This means that multiple INTR_FAST handlers can attach to the
same interrupt and that INTR_FAST and non-INTR_FAST handlers can attach
to the same interrupt. Sharing INTR_FAST handlers may not always be
desirable, but having sio(4) and uhci(4) fight over an IRQ isn't fun
either. Drivers can always still use INTR_EXCL to ask for an interrupt
exclusively. The way this sharing works is that when an interrupt
comes in, all the INTR_FAST handlers are executed first, and if any
threaded handlers exist, the interrupt thread is scheduled afterwards.
This type of layout also makes it possible to investigate using interrupt
filters ala OS X where the filter determines whether or not its companion
threaded handler should run.
- Aside from the INTR_FAST changes above, the impact on MD interrupt code
is mostly just 's/ithread/intr_event/'.
- A new MI ddb command 'show intrs' walks the list of interrupt events
dumping their state. It also has a '/v' verbose switch which dumps
info about all of the handlers attached to each event.
- We currently don't destroy an interrupt thread when the last threaded
handler is removed because it would suck for things like ppbus(8)'s
braindead behavior. The code is present, though, it is just under
#if 0 for now.
- Move the code to actually execute the threaded handlers for an interrrupt
event into a separate function so that ithread_loop() becomes more
readable. Previously this code was all in the middle of ithread_loop()
and indented halfway across the screen.
- Made struct intr_thread private to kern_intr.c and replaced td_ithd
with a thread private flag TDP_ITHREAD.
- In statclock, check curthread against idlethread directly rather than
curthread's proc against idlethread's proc. (Not really related to intr
changes)
Tested on: alpha, amd64, i386, sparc64
Tested on: arm, ia64 (older version of patch by cognet and marcel)
amd64, and is a factor of 3 less than the value previously auto-sized on
a 12GB machine, which would cause an overflow in calculations involving the
maxbcache int, causing bufinit() to loop forever at boot.
Reviewed by: mlaier, peter
changes in MD code are trivial, before this change, trapsignal and
sendsig use discrete parameters, now they uses member fields of
ksiginfo_t structure. For sendsig, this change allows us to pass
POSIX realtime signal value to user code.
2. Remove cpu_thread_siginfo, it is no longer needed because we now always
generate ksiginfo_t data and feed it to libpthread.
3. Add p_sigqueue to proc structure to hold shared signals which were
blocked by all threads in the proc.
4. Add td_sigqueue to thread structure to hold all signals delivered to
thread.
5. i386 and amd64 now return POSIX standard si_code, other arches will
be fixed.
6. In this sigqueue implementation, pending signal set is kept as before,
an extra siginfo list holds additional siginfo_t data for signals.
kernel code uses psignal() still behavior as before, it won't be failed
even under memory pressure, only exception is when deleting a signal,
we should call sigqueue_delete to remove signal from sigqueue but
not SIGDELSET. Current there is no kernel code will deliver a signal
with additional data, so kernel should be as stable as before,
a ksiginfo can carry more information, for example, allow signal to
be delivered but throw away siginfo data if memory is not enough.
SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can
not be caught or masked.
The sigqueue() syscall allows user code to queue a signal to target
process, if resource is unavailable, EAGAIN will be returned as
specification said.
Just before thread exits, signal queue memory will be freed by
sigqueue_flush.
Current, all signals are allowed to be queued, not only realtime signals.
Earlier patch reviewed by: jhb, deischen
Tested on: i386, amd64
variable and returns the previous value of the variable.
Tested on: i386, alpha, sparc64, arm (cognet)
Reviewed by: arch@
Submitted by: cognet (arm)
MFC after: 1 week
This kernel config briefly describes some of the major MAC policies
available on FreeBSD. The hope is that this will raise the awareness
about MAC and get more people interested.
Discussed with: scottl
it to __MINSIGSTKSZ. Define MINSIGSTKSZ in <sys/signal.h>.
This is done in order to use MINSIGSTKSZ for the macro PTHREAD_STACK_MIN
in <pthread.h> (soon <limits.h>) without having to include the whole
<sys/signal.h> header.
Discussed with: bde
archs and enable splash(4) by default (the non-working screen savers
either don't compile or just have no effect when loaded, i.e. don't
cause harm).
MFC after: 1 week
in the arm __swp() and sparc64 casa() and casax() functions is actually
being used as an input and output and not just the value of the register
that points to the memory location. This was the underlying source of
the mbuf refcount problems on sparc64 a while back. For arm this should be
a nop because __swp() has a constraint to clobber all memory which can
probably be removed now.
Reviewed by: alc, cognet
MFC after: 1 week
variables rather than void * variables. This makes it easier and simpler
to get asm constraints and volatile keywords correct.
MFC after: 3 days
Tested on: i386, alpha, sparc64
Compiled on: ia64, powerpc, amd64
Kernel toolchain busted on: arm
address, writting non-canonical address can cause kernel a panic,
by restricting base values to 0..VM_MAXUSER_ADDRESS, ensuring
only canonical values get written to the registers.
Reviewed by: peter, Josepha Koshy < joseph.koshy at gmail dot com >
Approved by: re (scottl)
- Let creator_bitblt() return ENODEV as it's not implemented (missed
in sys/dev/fb/creator.c rev. 1.6).
- As a speed optimization inline the creator_ras_wait() etc. helper
functions and also cache setting the font increment, font width
and plane mask. [1]
- I got the meaning of V_DISPLAY_BLANK wrong, it's blank like turn
off and not blank like turn on and clear the screen. So move
clearing the screen to creator_clear() were it hopefully belongs.
- Properly implement V_DISPLAY_BLANK, V_DISPLAY_STAND_BY and
V_DISPLAY_SUSPEND. This makes blank_saver.ko and green_saver.ko
work. [1]
- Change the order of operations in creator_fill_rect(), i.e. write
y before x and cy before cx. This fixes drawing the top part of
the border with Elite3D cards when switching from Xorg to a VTY.
- Move setting the chip configuration we use and invalidating the
cache variables to creator_set_mode() and set the V_ADP_MODECHANGE
flag. This causes creator_set_mode() to be called when the X server
shuts down which fixes the screen corruption caused most of the
time by Xorg not restoring the original configuration present at
startup.
Inspired by/based on: Xorg [1]
Approved by: re (scottl)
psm(4), ukbd(4), ums(4) and usb(4) on by default. Modulo some nits with
the most annoying one probably being USB keyboards no longer working at
the OFW boot prompt after halting FreeBSD these drivers work fine on
sparc64 including X and there's nothing left that I'd consider a show-
stopper. I.e. graphical consoles on sun4u machines should either work
out of the box or by plugging in a card that is supported by either
creator(4) or machfb(4). The exception obviously are SBus-only machines
without UPA slots like some Ultra 1 (but which also still lack support
in other areas) and certain Exx0 (but which probably are mainly used
with serial consoles anyway). I'll try to add a cgsix(4) for these later
as Sun CG6 cards are probably the most common SBus framebuffer cards in
sun4u machines. I however don't see much sense in adding drivers for the
dozen of SBus framebuffers that were destined for sparc v8 machines.
The rest of the USB drivers aren't enabled as I'm only aware of ukbd(4)
and ums(4) as well as ohci(4) working with the on-board ALI M5237 and
Sun PCIO-2 controllers. Aue(4) definitely doesn't work on sparc64, yet.
Thanks to:
- Jake for the initial work on syscons(4) on sparc64 and creator(4).
- Marcel for uart(4) and especially for its support for the SCCs which
are only used on sparc64 so far. In various regards it wouldn't have
been possible to enable syscons(4) by default on sparc64, yet, without
uart(4).
- All that tested patches.
Ok'ed by: scottl (RE hat), tmm
vm_page's machine-dependent fields. Use this function in
vm_pageq_add_new_page() so that the vm_page's machine-dependent and
machine-independent fields are initialized at the same time.
Remove code from pmap_init() for initializing the vm_page's
machine-dependent fields.
Remove stale comments from pmap_init().
Eliminate the Boolean variable pmap_initialized from the alpha, amd64,
i386, and ia64 pmap implementations. Its use is no longer required
because of the above changes and earlier changes that result in physical
memory that is being mapped at initialization time being mapped without
pv entries.
Tested by: cognet, kensmith, marcel
- Implement sampling modes and logging support in hwpmc(4).
- Separate MI and MD parts of hwpmc(4) and allow sharing of
PMC implementations across different architectures.
Add support for P4 (EMT64) style PMCs to the amd64 code.
- New pmcstat(8) options: -E (exit time counts) -W (counts
every context switch), -R (print log file).
- pmc(3) API changes, improve our ability to keep ABI compatibility
in the future. Add more 'alias' names for commonly used events.
- bug fixes & documentation.