We no longer really need a separate zfsloader. It was useful when we
were first supporting ZFS and had limited ability to properly boot off
of ZFS without the special boot loader. Now that the boot loader has
matured, go the way loader.efi pioneered and just build one
binary. Change the name of the loader to load in the secondary boot
blocks to be just /boot/loader. Provide a symbolic link from zfsloader
to loader so people who have not upgraded their boot blocks are not
affected. This has the happy benefit of making coexistence easier as
well (fewer binaries in the matrix).
Discussed with: allanjude@, kevans@
RelNotes: Yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16361
This corrects a mistake introduced to the cryptocheck tool in r331418.
Our CRYPTO_BLAKE2B and CRYPTO_BLAKE2S algorithms refer to either the plain,
unkeyed hashes (specified with cri_klen = 0), or a Blake2-specific keyed MAC
(when a cri_key is provided).
In contrast, OpenSSL's Blake2 algorithms only provide the plain hash.
Cryptocheck's T_HMAC corresponds to OpenSSL's HMAC() routine, which is the
ordinary HMAC construction applied to any plain, unkeyed hash. We don't
have any HMAC-Blake2 cipher modes in OCF, so fix the test to only test
Blake2 as a plain hash.
(Ideally we would test keyed Blake2 as well, but that is left as future
work.)
PR: 229795
Code analysis and runtime analysis using truss(8) indicate that the only
privileged operations performed by ntpd are adjusting system time, and
(re-)binding to privileged UDP port 123. These changes add a new mac(4)
policy module, mac_ntpd(4), which grants just those privileges to any
process running with uid 123.
This also adds a new user and group, ntpd:ntpd, (uid:gid 123:123), and makes
them the owner of the /var/db/ntp directory, so that it can be used as a
location where the non-privileged daemon can write files such as the
driftfile, and any optional logfile or stats files.
Because there are so many ways to configure ntpd, the question of how to
configure it to run without root privs can be a bit complex, so that will be
addressed in a separate commit. These changes are just what's required to
grant the limited subset of privs to ntpd, and the small change to ntpd to
prevent it from exiting with an error if running as non-root.
Differential Revision: https://reviews.freebsd.org/D16281
We can now have efifb being setup correctly.
Enjoy video output on some boards when you couldn't before.
Tested-On: Pine64
Tested-On: Pine64-LTS
Tested-On: Pinebook
Some driver (like efifb) needs to map more than the current L2_SIZE
Raise the size so we can map the framebuffer setup by the bootloader.
Reviewed by: cognet
I had naively assumed that building kernel would be sufficient to test that
the header is sane. However, it turns out this now needs -fms-extensions to
build. Rather than sprinkling -fms-extensions all over the place, revert
for now, and revisit with a better fix.
Summary:
Ports like sysutils/lsof troll through kernel structures, and
therefore include kernel headers and all the dirty secrets involved. struct
vm_page includes the struct md_page inline, which currently is only defined
if AIM or BOOKE is defined. Thus, by default, sysutils/lsof cannot build,
due to the struct md_page having an incomplete type. Fix this by merging
the two struct definitions into an anonymous struct-union.
A similar change could be made to unify the pmap structures as well.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D16232
Prevent installation of an all-zero TK.
This is also upline git commit 53bb18cc8b7a4da72e47e4b3752d0d2135cffb23.
Obtained from: https://w1.fi/security/2017-1/\
rebased-v2.6-0004-Prevent-installation-\
of-an-all-zero-TK.patch
X-MFC-with: r336203
On i386 and amd64, add a vm_phys segment for physical memory used to
store the kernel binary and other preloaded data. This makes it
possible to free such memory back to the system once it is no longer
needed, e.g., when a preloaded kernel module is unloaded. Previously,
it would have remained unused.
Reviewed by: kib, royger
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16330
The basename will never match against the preload metadata, so these
calls previously had no effect.
Reviewed by: kib, royger
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16330
cc1: warnings being treated as errors
/usr/src/lib/msun/src/s_cpow.c: In function 'cpow':
/usr/src/lib/msun/src/s_cpow.c:63: warning: implicit declaration of function 'CMPLX'
This is a follow-up to r336299.
* lib/msun/Makefile:
. Remove polevll.c
* lib/msun/ld80/e_powl.c:
. Copy contents of polevll.c to here. This is the only consumer of
these functions. Make functions 'static inline'.
. Make reducl a 'static inline' function.
* lib/msun/man/exp.3:
. Remove BUGS section that no longer applies.
* lib/msun/src/math_private.h:
. Remove prototypes of __p1evll() and __polevll()
* lib/msun/src/s_cpow.c:
* lib/msun/src/s_cpowf.c:
* lib/msun/src/s_cpowl.c
. Use the CMPLX macro from either C99 or math_private.h (depends of
compiler support) instead of the problematic use of complex I.
Submitted by: Steve Kargl <sgk@troutmask.apl.washington.edu>
PR: 229876
MFC after: 1 week
multithreaded programs that was addressed by r329254 was in the
implementation of pmap_enter() on some architectures, notably, amd64.
kib@, markj@ and I have audited all of the pmap_enter() implementations,
and fixed the broken ones, specifically, amd64 (r335784, r335971), i386
(r336092), mips (r336248), and riscv (r336294).
To be clear, the reason to address the problem within pmap_enter() and
revert r329254 is not just a matter of principle. An effect of r329254
was that a copy-on-write fault actually entailed two page faults, not
one, even for single-threaded programs. Now, in the expected case for
either single- or multithreaded programs, we are back to a single page
fault to complete a copy-on-write operation. (In extremely rare
circumstances, a multithreaded program could suffer two page faults.)
Reviewed by: kib, markj
Tested by: truckman
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16301
This is also upline git commit 53bb18cc8b7a4da72e47e4b3752d0d2135cffb23.
Obtained from: https://w1.fi/security/2017-1/\
rebased-v2.6-0004-Prevent-installation-\
of-an-all-zero-TK.patch
with 1 huge component and 1 tiny (but nowhere near denormal) component.
Rescale earlier so that a scale factor of 2 can be combined with a non-
scale divisor of 2, so that the division doesn't shift out a bit. In the
usual case where the scale factor is just 1, the division may shift out a
bit, but then the underflow is not spurious and the inaccuracies are harder
to fix.
Oppv2 add more flexibility on regulator value for the core voltage amongst
other new thing.
For now only shared opp table is supported as I don't have hardware with
non-shared opp table.
Tested-On: OrangePi One (with oppv1 and oppv2)
Tested-On: Pine64-LTS
In order to setup an initial environment and jump into the generic
hammer_time initialization function. Some of the code is shared with
PVHv1, while other code is PVHv2 specific.
This allows booting FreeBSD as a PVHv2 DomU and Dom0.
Sponsored by: Citrix Systems R&D
Allow the hypercall page to be initialized very early, even before
vtophys is functional. Also make the function global so it can be
called by other files.
This will be needed in order to perform the early bringup on PVHv2
guests.
Sponsored by: Citrix Systems R&D
When booted as PVHv2, there's no ACPI CPU object, so attach the PV CPU
device in order to take it's place.
This is required in case some device or driver tries to poke at the
PCPU device field.
Sponsored by: Citrix Systems R&D
HYPERVISOR_start_info is only available to PV and PVHv1 guests, HVM
and PVHv2 guests get this data from HVM parameters that are fetched
using a hypercall.
Instead provide a set of helper functions that should be used to fetch
this data. The helper functions have different implementations
depending on whether FreeBSD is running as PVHv1 or HVM/PVHv2 guest
type.
This helps to cleanup generic Xen code by removing quite a lot of
xen_pv_domain and xen_hvm_domain macro usages.
Sponsored by: Citrix Systems R&D
The PVHv2 entry point is fairly similar to the multiboot1 one. The
kernel is started in protected mode with paging disabled. More
information about the exact BSP state can be found in the pvh.markdown
document on the Xen tree.
This entry point is going to be joined with the native entry point at
hammer_time, and in order to do so the BSP needs to be bootstrapped
into long mode with the same set of page tables as used on bare metal.
Sponsored by: Citrix Systems R&D
