acpi_EvaluateInteger.
Use acpi_EvaluateInteger instead of doing things the hard way where
possible.
AcpiSetSystemSleepState (unofficial) becomes AcpiEnterSleepState.
Use the AcpiGbl_FADT pointer rather than searching for the FADT.
to 1GB. A box of mine is running with MAXDSIZ and DFLDSIZ increased
up to 1.5GB.
Wishlist: It would be nice to warn if MAXTSIZ + MAXDSIZ + MAXSSIZ
exceeds VM_MAXUSER_ADDRESS - VM_MINUSER_ADDRESS.
(e.g. ethernet nodes are persistent until you rip out the hardware)
Use this support in the ethernet and sample nodes.
Add some more abstraction on the 'item's so that node and
hook reference counting can be checked easier.
Slight man page correction.
Make pppoe type dependent on ethernet type.
Clean up node shutdown a little.
Move a mutex from MTX_SPIN to MTX_DEF (oops)
Fix small ref-counting bug.
remove warning on one2many type.
incompletely converting simplelocks to mutexes (COM_LOCK() is supposed
to hide the SMP locking internals, but it now depends on mutex interfaces
being visible).
filesystem softdep_process_worklist() is called in a loop until it indicates
that no dependancies remain, but the determination of that fact depends on
there only being one softdep_process_worklist() instance running. It was
possible for the syncer to also be running softdep_process_worklist()
and the pre-existing checks in the code to prevent this were not sufficient
to prevent the race. This patch solves the problem.
Approved-by: mckusick
- Add a note about the special locking semantics used for members such as
p_cred that are read by multiple processes but only written to by the
current process.
- Change p_upages_obj's locking key to note that it is created at fork
and left alone afterwards (the actual pointer, not what it points to.)
- Mark p_intr_nesting_level as being implicitly locked since only curproc
accesses it.
Reviewed by: jake
valid) if BPF is missing.
The netgraph_bpf node forced bpf to be present, reflect that in the
options.
Stop doing a 'count bpf' - we provide stubs.
Since a handful of drivers still refer to "bpf.h", provide a more accurate
indication that the API is present always. (eg: netinet6)
With this flag set malloc() will panic if memory allocation failed.
This usable only in critical places where failed allocation is fatal.
Reviewed by: peter
would *want* to is a different story, but it used to be able to be done
statically. Get rid of #include "loop.h" and struct ifnet loif[NLOOP];
This could be used as an example of how to do this in other drivers,
for example: ccd.
fsyncs, which typically occur during unmounting, will drain all dirty
buffers even if it takes multiple passes to do so. The guarentee was
mangled by the last patch which solved a problem due to -current disabling
interrupts while holding giant (which caused an infinite spin loop waiting for
I/O to complete). -stable does not have either patch, but has a similar
bug in the original spec_fsync() code which is triggered by a bug in the
softupdates umount code, a fix for which will be committed to -current
as soon as Kirk stamps it. Then both solutions will be MFC'd to -stable.
-stable currently suffers from a combination of the softupdates bug and
a small window of opportunity in the original spec_fsync() code, and -stable
also suffers from the spin-loop bug but since interrupts are enabled the
spin resolves itself in a few milliseconds.
folks.
My guess is that reducing the number of tags is just masking the real
problem for the PR submitter. I'll re-open the PR and see if I can work
with the submitter to diagnose the problem.
PR: 21139
machines (duh!). This was one reason why this script broke on
i386. The other being that on i386 sections did not have the
proper alignment. This has been fixed in sys/sys/linker_set.h.
declarations will not be aligned by default.
o Remove the alignment work-around for alpha. Our current alpha
as(1) does not assume alignment after section switching, nor
does the ia64 as(1).
- When used on a 33MHz PCI BUS, the 53C1010-66 revision 0
requires extra clocks to be inserted in data out phase.
Revision 1 is fixed.
- The 53C1010-33 revision 1 requires internal cycles to be
disabled due to possible contentions on IO registers.
Revision 2 is fixed.
Fix:
- The probing of HVD from GPIO3 bit by the driver was reversed.
The driver could misprobe the bus mode of a 825 or 875 chip
that was not previously initialized (no BIOS for example).
The new method is 'flood' (in addition to the old round-robin)
in which incoming packets are sent to more than one outgoing hook.
(I'm not sure what Rogier is using this for but it seems generally useful
and isn't much extra)
Submitted by: Rogier R. Mulhuijzen (drwilco@drwilco.net )
o Use objdump instead of gensetdefs(1) to build the linker sets.
o Allow overriding of nm and objdump in resp. genassym.sh and
gensetdefs.pl for non-native toolchains.
Reviewed by: arch
Perl improvements: Jos Backus <josb@cncdsl.com>, benno
problem is that a mutex lock, prior to this change, is acquired before
the curproc is set to idleproc, so we mess ourselves up by calling
the mutex lock routine with curproc == NULL.
Moving it up after the aps_ready spin-wait has us hopefully setting it
after idleproc is setup.
Solved by: jake (the allmighty) :-)
Move the helper macros from sbuf.h to sbuf.c
Use ints instead of size_ts.
Relax the requirements for sbuf_finish(): it is now possible to finish an
overflowed buffer.
Make sbuf_len() return -1 instead of 0 if the sbuf overflowed.
Requested by: gibbs
while strlcpy() existed, before it got backed out due to an extended
bikeshed argument. Sigh. Back to the old version with the redundant
code to terminate the string. :-(
is going away soon anyways. Instead, don't pass MTX_RECURSE to mtx_init,
so that WITNESS will panic if the driver mutex is recursed on.
- Use MTX_DEF in mtx_init() instead of assuming that it will be 0.
even if mode PS/2 is forced with bootflags. As a matter of fact,
chipsets needs some extra configuration for accessing PS/2 mode
from ECP. The current patch is only relevant for generic chipsets
since specific code is supposed to deal with this during detection.
instead of a trapframe directly. (Requested by bde.)
- Convert the alpha switch_trampoline to call fork_exit() and use the MI
fork_return() instead of child_return().
- Axe child_return().
- Proc locking in a few places.
- faultin() now must be called with the proc lock held.
- Split up swappable() into a couple of tests so that it can be locke in
swapout_procs().
- Use queue macros.
- Update stopevent() to assert that the proc lock is held when it is
held and is not recursed. Note that the STOPEVENT() macro obtains
the proc lock when calling this function.
mtx right now as it makes debugging harder. When we are in optimizing
mode, we can revisit this.
- Fix the KTR trace messages to use %p rather than 0x%p to avoid duplicate
0x's in KTR output.
- During witness_fixup, release Giant so that witness doesn't get confused.
Also, grab all_mtx while walking the list of mutexes.
- Remove w_sleep and w_recurse. Instead, perform checks on mutexes using
the mutex's mtx_flags field.
- Allow debug.witness_ddb and debug.witness_skipspin to be set from the
loader.
- Add Giant to the front of existing order_list entries to help ensure
Giant is always first.
- Add an order entry for the various proc locks. Note that this only
helps keep proc in order mostly as the allproc and proctree mutexes are
only obtained during a lockmgr operation on the specified mutex.
to extract the PC from that to send to addupc_task() so that it can be
called from MI code.
- Remove all traces of have_giant with extreme prejudice and use
mtx_owned(&Giant) instead where appropriate.
- Proc locking.
- P_FOO -> PS_FOO.
- Don't grab Giant just to look in curproc's p_addr during a trap since we
may choose to immediately exit. Instead, delay grabbing Giant a bit
until we actually need it.
- Don't reset 'p' to 'curproc' in syscall() to handle the case of a child
returning from fork1() since children don't return via syscall().
- Remove an XXX comment in ast() that questions the correctness of the
userland check. The code is correct.
- Don't send IPIs for pmap_invalidate_page() or pmap_invalidate_all()
in the UP case.
- Catch up to cpuno -> cpuid.
- Convert some sanity checks that were #ifdef DIAGNOSTIC to KASSERT()'s.
- Rename the per-CPU variable 'cpuno' to 'cpuid'. This was done so that
there is one consistent name across all architectures for a logical
CPU id.
- Remove all traces of IRQ forwarding.
- Add globaldata_register() hook called by globaldata_init() to register
globaldata structures in the cpuid_to_globaldata array.
- Catch up to P_FOO -> PS_FOO.
- Bring across some fixes for forwarded_statclock() from the i386 version
to handle ithreads and idleproc properly.
- Rename addugd_intr_forwarded() to addupc_intr_forwarded() so that it is
the same name on all architectures.
- Set flags in p_sflag instead of calling psignal() from
forward_hardclock().
- Proc locking.
- When we handle an IPI, turn off its bit in the mask of IPI's we are
currently handling so that an IPI doesn't send a CPU into an infinite
loop.
that mutex operations work.
- Enter Giant earlier so we hold it during boot.
- Proc locking.
- Move globaldata_init() into here from mp_machdep.c so that UP kernels
don't depend on mp_machdep.c. Use a callout in the SMP case to register
the boot processor's globaldata in the cpuid_to_globaldata array.
that name as a variable. Use mtx_owned(&Giant) where appropriate
instead.
- Proc locking.
- P_FOO -> PS_FOO.
- Update comments about enable interrupts during trap and why this may be
bad if we trap while holding a spin mutex.
- Don't bother resetting p to curproc in syscall() in case we are the child
returning from fork. The child hasn't returned from fork through syscall
in a while.
- Remove fork_return() as it has been superseded by the MI version.
the alpha mp_machdep.c.
- Proc locking.
- Catch up to the P_FOO -> PS_FOO proc flags changes.
- Stick ap_init()'s prototype with the other prototypes.
- Remove the Xforwardirq IPI.
- Remove unused simplelocks.
- Don't try to psignal() from forward_statclock(), but set the appropriate
signal pending flag in p_sflag instead.
- Add in KTR_SMP tracepoints for various SMP functions. (Brought over
from the alpha port)
- Setup proc0.p_heldmtx, proc0.contested, and curproc earlier so that we
can use mutexes.
- Initialize sched_lock and Giant earlier and enter Giant during init386.
- Use suser(9) instead of checking cr_uid directly.
and is protected by the proc lock. p_sflag is protected by sched_lock
and holds the following flags: PS_INMEM, PS_OWEUPC, PS_PROFIL, PS_SINTR,
PS_TIMEOUT, PS_ALRMPEND, PS_PROFPEND, PS_CVWAITQ, PS_SWAPINREQ, and
PS_SWAPPING.
- p_klist is definitely locked now by the proc lock.
- p_runtime, p_[usi]u are locked by sched_lock.
- Add a new P_KTHREAD flag set for kernel threads created via
kthread_create(9).
- STOPEVENT() only needs the proc lock, it does not need Giant.
- faultin() already checks PS_INMEM, so simplify the check in PHOLD() so
that we only need to grab the proc lock and let faultin() perform the
PS_INMEM check.
- Add a prototype for zpfind().
- Add prototypes for the new fork_exit() and fork_return() MI functions
that manage the fork return path.
- Add a prototype for the MD function userret() so that it can be called
from fork_return().
- Add needed include of <machine/frame.h> in the kernel.
- remove all occurances of FLAG_XXX values and replace with CARD_TYPEP_XXX
- remove sc_flag from isic softc and replace it with sc_cardtyp
remove some left over redundant definitions from isic and i4b_l1.h
remove left over cvs id from i4b cvs repository
