- there is no such flag in Solaris and derivatives
- the flag was added in an unrelated change
- the flag is not used
The proper way to allocate zeroed out memory is to use kmem_zalloc.
MFC after: 3 days
x86 buses
Otherwise the uart hardware could be in such a state after the resume
where IER is cleared and thus no interrupts are generated.
This behavior is observed and tested with QEMU, so I am comitting this
change to help with my debugging.
There has been no feedback from users of serial ports on real hardware.
MFC after: 20 days
This should allow the kernel linker to easily detect a situation
when the module is present both in a kernel and in a preloaded file
(zfs.ko).
Reviewed by: jhb
MFC after: 5 days
track the MNT_SYNCHRONOUS flag. It is set to the latter at mount time
but not updated by MNT_UPDATE.
Use MNT_SYNCHRONOUS to decide to write the FAT updates syncrhonously.
Submitted by: bde
MFC after: 1 week
a directory to a subdir of the root directory from somewhere else.
For all directory moves that change the parent directory, the dotdot
entry must be fixed up. For msdosfs, the root directory is magic for
non-FAT32. It is less magic for FAT32, but needs the same magic for
the dotdot fixup. It didn't have it.
Both chkdsk and fsck_msdosfs fix the corrupt directory entries with no
problems.
The fix is to use the same magic for dotdot in msdosfs_rename() as in
msdosfs_mkdir().
For msdosfs_mkdir(), document the magic. When writing the dotdot entry
in mkdir, use explicitly set pcl variable instead on relying on the
start cluster of the root directory typically has a value < 65536.
Submitted by: bde
MFC after: 1 week
Trying FAT32 on a small partition failed to mount because
pmp->pm_Sectors was nonzero. Normally, FAT32 file systems are so
large that the 16-bit pm_Sectors can't hold the size. This is
indicated by setting it to 0 and using only pm_HugeSectors. But at
least old versions of newfs_msdos use the 16-bit field if possible,
and msdosfs supports this except for breaking its own support in the
sanity check. This is quite different from the handling of pm_FATsecs
-- now the 16-bit value is always ignored for FAT32 except for
checking that it is 0, and newfs_msdos doesn't use the 16-bit value
for FAT32.
Submitted by: bde
MFC after: 1 week
this check is somewhere in the network code, but this assertion
already proven to be useful in catching what seems to be driver bugs
causing NFS scrambling random memory.
Discussed with: rmacklem
MFC after: 1 week
zero on slower machines, which make the fenced get_timecount methods
not used despite needed. Remove the (shift > 0) condition when
selecting the get_timecount() implementation.
Rename smp_tsc_shift to tsc_shift, and apply it for the UP case too.
Allow shift to reach value of 31 instead of 30, as it was previously
(should be nop).
Reorganize the tc quality calculation to remove the conditionally
compiled block. Rename test_smp_tsc() to test_tsc() and provide
separate versions for SMP and UP builds. The check for virtialized
hardware is more natural to perform in the smp version of the
test_tsc(), since it is only done for smp case.
Noted and reviewed by: bde (previous version)
MFC after: 12 days
VM_KMEM_SIZE_SCALE specifies which fraction of the available physical
memory, after deduction of the kernel itself and other early statically
allocated memory, can be used for the kmem_map. The kmem_map provides
for all UMA/malloc allocations in KVM space.
Previously ARM was using a fixed kmem_map size of (12*1024*1024) = 12MB
without regard to effectively available memory. This is too small for
recent ARM SoC with more than 128MB of RAM.
For reference a description of others related kmem_map parameters:
VM_KMEM_SIZE default start size of kmem_map if SCALE is
not defined
VM_KMEM_SIZE_MIN hard floor on the kmem_map size
VM_KMEM_SIZE_MAX hard ceiling on the kmem_map size
VM_KMEM_SIZE_SCALE fraction of the available real memory to
be used for the kmem_map, limited by the
MIN and MAX parameters.
Tested by: ian
MFC after: 1 week
The "blackhole" driver was used in conjunction with bhyve to sequester
pci devices intended for passthru until vmm.ko was loaded. This was
useful at one point because vmm.ko could not be loaded at boot time.
The same functionality can now be achieved by loading vmm.ko via the
loader along with the kernel.
Discussed with: grehan
Obtained from: NetApp
can only be located at the beginning or the end of the BAR.
If the MSI-table is located in the middle of a BAR then we will split the
BAR into two and create two mappings - one before the table and one after
the table - leaving a hole in place of the table so accesses to it can be
trapped and emulated.
Obtained from: NetApp
The maximum length of an environment variable puts a limitation on the
number of passthru devices that can be specified via a single variable.
The workaround is to allow user to specify passthru devices via multiple
environment variables instead of a single one.
Obtained from: NetApp
case 0x3E: /* Per Intel document 325462-045US 01/2013. */
Add manpage to document all the goodness that is available in this
processor model.
No support for uncore events at this time.
Submitted by: hiren panchasara <hiren.panchasara@gmail.com>
Reviewed by: davide, jimharris, sbruno
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
Since ARP and routing are separated, "proxy only" entries
don't have any meaning, thus we don't need additional field
in sockaddr to pass SIN_PROXY flag.
New kernel is binary compatible with old tools, since sizes
of sockaddr_inarp and sockaddr_in match, and sa_family are
filled with same value.
The structure declaration is left for compatibility with
third party software, but in tree code no longer use it.
Reviewed by: ru, andre, net@
Right now, ic_curchan seems to be updated rather quickly (ie, during
the ioctl) and before the driver gets notified of what's going on.
So what I was seeing was:
* NIC was in channel X;
* It generates PHY errors for channel X;
* an ioctl comes along from userland and changes things to channel Y;
* .. this updates ic_curchan, but hasn't yet reset the hardware;
* in parallel, RX is occuring and it looks at ic_curchan;
* .. which is channel Y, so events get stamped with that now.
Sigh.
into the FreeBSD boot loader, typically for non-USB aware BIOSes, EFI systems
or embedded platforms. This is also useful for out of the system compilation
of the FreeBSD USB stack for various purposes. The USB kernel files can
now optionally include a global header file which should include all needed
definitions required to compile the FreeBSD USB stack. When the global USB
header file is included, no other USB header files will be included by
default.
Add new file containing the USB stack configuration for the
FreeBSD loader build.
Replace some __FBSDID()'s by /* $FreeBSD$ */ comments. Now all
USB files follow the same style.
Use cases:
- console in loader via USB
- loading kernel via USB
Discussed with: Hiroki Sato, hrs @ EuroBSDCon
in kern_wait6(), which is called by kern_wait(). Remove the redundand
check, introduced in r243136, and add a comment noting this, to make
the code less confusing.
The blank lines are added to properly delineate the scope of the
preceeding comments.
Noted by: "Jukka A. Ukkonen" <jau@iki.fi>
MFC after: 1 week
but use normal references instead of weak. This makes the statically
linked binaries to use fast gettimeofday(2) by forcing the linker to
resolve references and providing the neccessary functions.
Reported by: bde
Tested by: marius (sparc64)
MFC after: 2 weeks
timecounter to 1, and correspondingly increase the precision of the
gettimeofday(2) and related functions in the default configuration.
The motivation for the TSC-low timecounter, as described in the
r222866, seems to provide a workaround for the non-serializing
behaviour of the RDTSC on some Intel hardware. Tests demonstrate that
even with the pre-shift of 8, the cross-core non-monotonicity of the
RDTSC is still observed reliably, e.g. on the Nehalems. The r238755
and r238973 implemented the proper fix for the issue.
The pre-shift of 1 is applied to keep TSC not overflowing for the
frequency of hardclock down to 2 sec/intr. The pre-shift is made a
tunable to allow the easy debugging of the issues users could see with
the shift being too low.
Reviewed by: bde
MFC after: 2 weeks
