Centralize calculation of signal and ucode delivered on unhandled page
fault in new function vm_fault_trap(). MD trap_pfault() now almost
always uses the signal numbers and error codes calculated in
consistent MI way.
This introduces the protection fault compatibility sysctls to all
non-x86 architectures which did not have that bug, but apparently they
were already much more wrong in selecting delivered signals on
protection violations.
Change the delivered signal for accesses to mapped area after the
backing object was truncated. According to POSIX description for
mmap(2):
The system shall always zero-fill any partial page at the end of an
object. Further, the system shall never write out any modified
portions of the last page of an object which are beyond its
end. References within the address range starting at pa and
continuing for len bytes to whole pages following the end of an
object shall result in delivery of a SIGBUS signal.
An implementation may generate SIGBUS signals when a reference
would cause an error in the mapped object, such as out-of-space
condition.
Adjust according to the description, keeping the existing
compatibility code for SIGSEGV/SIGBUS on protection failures.
For situations where kernel cannot handle page fault due to resource
limit enforcement, SIGBUS with a new error code BUS_OBJERR is
delivered. Also, provide a new error code SEGV_PKUERR for SIGSEGV on
amd64 due to protection key access violation.
vm_fault_hold() is renamed to vm_fault(). Fixed some nits in
trap_pfault()s like mis-interpreting Mach errors as errnos. Removed
unneeded truncations of the fault addresses reported by hardware.
PR: 211924
Reviewed by: alc
Discussed with: jilles, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21566
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
error in the function hypercall_memfree(), where the wrong arena was being
passed to kmem_free().
Introduce a per-page flag, VPO_KMEM_EXEC, to mark physical pages that are
mapped in kmem with execute permissions. Use this flag to determine which
arena the kmem virtual addresses are returned to.
Eliminate UMA_SLAB_KRWX. The introduction of VPO_KMEM_EXEC makes it
redundant.
Update the nearby comment for UMA_SLAB_KERNEL.
Reviewed by: kib, markj
Discussed with: jeff
Approved by: re (marius)
Differential Revision: https://reviews.freebsd.org/D16845
became unused in FreeBSD 12.x as a side-effect of the NUMA-related
changes.)
Reviewed by: kib, markj
Discussed with: jeff, re@
Differential Revision: https://reviews.freebsd.org/D16825
The domain and flags parameters suffice. In fact, the related functions
kmem_alloc_{attr,contig}_domain() don't have an arena parameter.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D16713
On i386 and amd64, add a vm_phys segment for physical memory used to
store the kernel binary and other preloaded data. This makes it
possible to free such memory back to the system once it is no longer
needed, e.g., when a preloaded kernel module is unloaded. Previously,
it would have remained unused.
Reviewed by: kib, royger
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16330
Most kernel memory that is allocated after boot does not need to be
executable. There are a few exceptions. For example, kernel modules
do need executable memory, but they don't use UMA or malloc(9). The
BPF JIT compiler also needs executable memory and did use malloc(9)
until r317072.
(Note that a side effect of r316767 was that the "small allocation"
path in UMA on amd64 already returned non-executable memory. This
meant that some calls to malloc(9) or the UMA zone(9) allocator could
return executable memory, while others could return non-executable
memory. This change makes the behavior consistent.)
This change makes malloc(9) return non-executable memory unless the new
M_EXEC flag is specified. After this change, the UMA zone(9) allocator
will always return non-executable memory, and a KASSERT will catch
attempts to use the M_EXEC flag to allocate executable memory using
uma_zalloc() or its variants.
Allocations that do need executable memory have various choices. They
may use the M_EXEC flag to malloc(9), or they may use a different VM
interfact to obtain executable pages.
Now that malloc(9) again allows executable allocations, this change also
reverts most of r317072.
PR: 228927
Reviewed by: alc, kib, markj, jhb (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15691
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
reservations by giving each memory domain its own KVA space in vmem that
is naturally aligned on superpage boundaries.
Reviewed by: alc, markj, kib (some objections)
Sponsored by: Netflix, Dell/EMC Isilon
Tested by; pho
Differential Revision: https://reviews.freebsd.org/D13289
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
There is no NO_SWAPPING #ifdef left in the code.
Requested by: alc
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D12663
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Rename kern_vm_* functions to kern_*. Move the prototypes to
syscallsubr.h. Also change Mach VM types to uintptr_t/size_t as
needed, to avoid headers pollution.
Requested by: alc, jhb
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9535
This makes the code to pass whole word of the mmap(2) syscall argument
prot to the syscall helper kern_vm_mmap(), which can validate all
bits. The change provides temporal fix for sys/vm/mmap_test
mmap__bad_arguments, which was broken after r313352.
PR: 216976
Reported and tested by: ngie
Sponsored by: The FreeBSD Foundation
kern_vm_munmap(), and kern_vm_madvise(), and use them in various compats
instead of their sys_*() counterparts.
Reviewed by: ed, dchagin, kib
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9378
- Pull the vmspace logic out into helper functions and reduce duplication.
Operations on the vmspace are all isolated to vm_map.c, but it now exports
a new 'vmspace_switch_aio' for use by AIO kernel processes.
- When an AIO kernel process wants to exit, break out of the main loop and
perform cleanup after the loop end. This reduces a lot of indentation and
allows cleanup to more closely mirror setup actions before the loop starts.
- Convert a DIAGNOSTIC to KASSERT().
- Replace mycp with more typical 'p'.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4990
logic is now placed in the mmap hook implementation rather than requiring
it to be placed in sys/vm/vm_mmap.c. This hook allows new file types to
support mmap() as well as potentially allowing mmap() for existing file
types that do not currently support any mapping.
The vm_mmap() function is now split up into two functions. A new
vm_mmap_object() function handles the "back half" of vm_mmap() and accepts
a referenced VM object to map rather than a (handle, handle_type) tuple.
vm_mmap() is now reduced to converting a (handle, handle_type) tuple to a
a VM object and then calling vm_mmap_object() to handle the actual mapping.
The vm_mmap() function remains for use by other parts of the kernel
(e.g. device drivers and exec) but now only supports mapping vnodes,
character devices, and anonymous memory.
The mmap() system call invokes vm_mmap_object() directly with a NULL object
for anonymous mappings. For mappings using a file descriptor, the
descriptors fo_mmap() hook is invoked instead. The fo_mmap() hook is
responsible for performing type-specific checks and adjustments to
arguments as well as possibly modifying mapping parameters such as flags
or the object offset. The fo_mmap() hook routines then call
vm_mmap_object() to handle the actual mapping.
The fo_mmap() hook is optional. If it is not set, then fo_mmap() will
fail with ENODEV. A fo_mmap() hook is implemented for regular files,
character devices, and shared memory objects (created via shm_open()).
While here, consistently use the VM_PROT_* constants for the vm_prot_t
type for the 'prot' variable passed to vm_mmap() and vm_mmap_object()
as well as the vm_mmap_vnode() and vm_mmap_cdev() helper routines.
Previously some places were using the mmap()-specific PROT_* constants
instead. While this happens to work because PROT_xx == VM_PROT_xx,
using VM_PROT_* is more correct.
Differential Revision: https://reviews.freebsd.org/D2658
Reviewed by: alc (glanced over), kib
MFC after: 1 month
Sponsored by: Chelsio
pmap_unwire() and vm_object_unwire().
Retire vm_fault_{un,}wire(), since they are no longer used.
(See r268327 and r269134 for the motivation behind this change.)
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
underlying physical pages are mapped by the pmap. If, for example, the
application has performed an mprotect(..., PROT_NONE) on any part of the
wired region, then those pages will no longer be mapped by the pmap.
So, using the pmap to lookup the wired pages in order to unwire them
doesn't always work, and when it doesn't work wired pages are leaked.
To avoid the leak, introduce and use a new function vm_object_unwire()
that locates the wired pages by traversing the object and its backing
objects.
At the same time, switch from using pmap_change_wiring() to the recently
introduced function pmap_unwire() for unwiring the region's mappings.
pmap_unwire() is faster, because it operates a range of virtual addresses
rather than a single virtual page at a time. Moreover, by operating on
a range, it is superpage friendly. It doesn't waste time performing
unnecessary demotions.
Reported by: markj
Reviewed by: kib
Tested by: pho, jmg (arm)
Sponsored by: EMC / Isilon Storage Division
- add fields to 'struct pmap' that are required to manage nested page tables.
- add a parameter to 'vmspace_alloc()' that can be used to override the
default pmap initialization routine 'pmap_pinit()'.
These changes are pushed ahead of the remaining changes in 'bhyve_npt_pmap'
in anticipation of the upcoming KBI freeze for 10.0.
Reviewed by: kib@, alc@
Approved by: re (glebius)
transparent layering and better fragmentation.
- Normalize functions that allocate memory to use kmem_*
- Those that allocate address space are named kva_*
- Those that operate on maps are named kmap_*
- Implement recursive allocation handling for kmem_arena in vmem.
Reviewed by: alc
Tested by: pho
Sponsored by: EMC / Isilon Storage Division
We cannot busy a page before doing pagefaults.
Infact, it can deadlock against vnode lock, as it tries to vget().
Other functions, right now, have an opposite lock ordering, like
vm_object_sync(), which acquires the vnode lock first and then
sleeps on the busy mechanism.
Before this patch is reinserted we need to break this ordering.
Sponsored by: EMC / Isilon storage division
Reported by: kib
- It does not let pages respect the LRU policy
- It bloats the active/inactive queues of few pages
Try to avoid it as much as possible with the long-term target to
completely remove it.
Use the soft-busy mechanism to protect page content accesses during
short-term operations (like uiomove_fromphys()).
After this change only vm_fault_quick_hold_pages() is still using the
hold mechanism for page content access.
There is an additional complexity there as the quick path cannot
immediately access the page object to busy the page and the slow path
cannot however busy more than one page a time (to avoid deadlocks).
Fixing such primitive can bring to complete removal of the page hold
mechanism.
Sponsored by: EMC / Isilon storage division
Discussed with: alc
Reviewed by: jeff
Tested by: pho
eliminating duplicated code in the various pmap implementations.
Micro-optimize vm_phys_free_pages().
Introduce vm_phys_free_contig(). It is fast routine for freeing an
arbitrary number of physically contiguous pages. In particular, it
doesn't require the number of pages to be a power of two.
Use "u_long" instead of "unsigned long".
Bruce Evans (bde@) has convinced me that the "boundary" parameters
to kmem_alloc_contig(), vm_phys_alloc_contig(), and
vm_reserv_reclaim_contig() should be of type "vm_paddr_t" and not
"u_long". Make this change.
function vm_mmap_to_errno(). It is useful for the drivers that implement
mmap(2)-like functionality, to be able to return error codes consistent
with mmap(2).
Sponsored by: The FreeBSD Foundation
No objections from: alc
MFC after: 1 week
uiomove generates EFAULT if any accessed address is not mapped, as
opposed to handling the fault.
Sponsored by: The FreeBSD Foundation
Reviewed by: alc (previous version)
condition in proc_rwmem() and to (2) simplify the implementation of the
cxgb driver's vm_fault_hold_user_pages(). Specifically, in proc_rwmem()
the requested read or write could fail because the targeted page could be
reclaimed between the calls to vm_fault() and vm_page_hold().
In collaboration with: kib@
MFC after: 6 weeks
use-after-free over a longer time. Also release the backing pages of
a guarded allocation at free(9) time to reduce the overhead of using
memguard(9). Allow setting and varying the malloc type at run-time.
Add knobs to allow:
- randomly guarding memory
- adding un-backed KVA guard pages to detect underflow and overflow
- a lower limit on the size of allocations that are guarded
Reviewed by: alc
Reviewed by: brueffer, Ulrich Spörlein <uqs spoerlein net> (man page)
Silence from: -arch
Approved by: zml (mentor)
MFC after: 1 month
address space for an address as aligned by the new pmap_align_tlb()
function, which is for constraints imposed by the TLB. [1]
o) Add a kmem_alloc_nofault_space() function, which acts like
kmem_alloc_nofault() but allows the caller to specify which find-space
option to use. [1]
o) Use kmem_alloc_nofault_space() with VMFS_TLB_ALIGNED_SPACE to allocate the
kernel stack address on MIPS. [1]
o) Make pmap_align_tlb() on MIPS align addresses so that they do not start on
an odd boundary within the TLB, so that they are suitable for insertion as
wired entries and do not have to share a TLB entry with another mapping,
assuming they are appropriately-sized.
o) Eliminate md_realstack now that the kstack will be appropriately-aligned on
MIPS.
o) Increase the number of guard pages to 2 so that we retain the proper
alignment of the kstack address.
Reviewed by: [1] alc
X-MFC-after: Making sure alc has not come up with a better interface.
Previously, one of these limits was initialized in two places to a
different value in each place. Moreover, because an unsigned int was used
to represent the amount of pageable physical memory, some of these limits
were incorrectly initialized on 64-bit architectures. (Currently, this
error is masked by login.conf's default settings.)
Make vm_thread_swapin() and vm_thread_swapout() static.
Submitted by: bde (an earlier version)
Reviewed by: kib
memory with the specified physical attributes. In particular, like
kmem_alloc_contig(), the caller can specify the physical address range
from which the physical pages are allocated and the memory attributes
(i.e., cache behavior) for these physical pages. However, in contrast to
kmem_alloc_contig() or contigmalloc(), the physical pages that are
allocated by kmem_alloc_attr() are not necessarily physically contiguous.
This function is needed by DRM and VirtualBox.
Correct an error in the prototype for kmem_malloc(). The third argument
had the wrong type.
Tested by: rnoland
MFC after: 3 days
pages.
(Note: Claims made in the comments about the handling of breakpoints in
wired pages have been false for roughly a decade. This and another bug
involving breakpoints will be fixed in coming changes.)
Reviewed by: kib
the memory or D-cache, depending on the semantics of the platform.
vm_sync_icache() is basically a wrapper around pmap_sync_icache(),
that translates the vm_map_t argumument to pmap_t.
o Introduce pmap_sync_icache() to all PMAP implementation. For powerpc
it replaces the pmap_page_executable() function, added to solve
the I-cache problem in uiomove_fromphys().
o In proc_rwmem() call vm_sync_icache() when writing to a page that
has execute permissions. This assures that when breakpoints are
written, the I-cache will be coherent and the process will actually
hit the breakpoint.
o This also fixes the Book-E PMAP implementation that was missing
necessary locking while trying to deal with the I-cache coherency
in pmap_enter() (read: mmu_booke_enter_locked).
The key property of this change is that the I-cache is made coherent
*after* writes have been done. Doing it in the PMAP layer when adding
or changing a mapping means that the I-cache is made coherent *before*
any writes happen. The difference is key when the I-cache prefetches.
Remove the altkstacks, instead instantiate threads with kernel stack
allocated with the right size from the start. For the thread that has
kernel stack cached, verify that requested stack size is equial to the
actual, and reallocate the stack if sizes differ [1].
This fixes the bug introduced by r173361 that was committed several days
after r173004 and consisted of kthread_add(9) ignoring the non-default
kernel stack size.
Also, r173361 removed the caching of the kernel stacks for a non-first
thread in the process. Introduce separate kernel stack cache that keeps
some limited amount of preallocated kernel stacks to lower the latency
of thread allocation. Add vm_lowmem handler to prune the cache on
low memory condition. This way, system with reasonable amount of the
threads get lower latency of thread creation, while still not exhausting
significant portion of KVA for unused kstacks.
Submitted by: peter [1]
Discussed with: jhb, julian, peter
Reviewed by: jhb
Tested by: pho (and retested according to new test scenarious)
MFC after: 1 week
allocated with the right size from the start. For the thread that has
kernel stack cached, verify that requested stack size is equial to the
actual, and reallocate the stack if sizes differ [1].
This fixes the bug introduced by r173361 that was committed several days
after r173004 and consisted of kthread_add(9) ignoring the non-default
kernel stack size.
Also, r173361 removed the caching of the kernel stacks for a non-first
thread in the process. Introduce separate kernel stack cache that keeps
some limited amount of preallocated kernel stacks to lower the latency
of thread allocation. Add vm_lowmem handler to prune the cache on
low memory condition. This way, system with reasonable amount of the
threads get lower latency of thread creation, while still not exhausting
significant portion of KVA for unused kstacks.
Submitted by: peter [1]
Discussed with: jhb, julian, peter
Reviewed by: jhb
Tested by: pho
MFC after: 1 week
dependent memory attributes:
Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the
fact that there are machine-dependent memory attributes that have
nothing to do with controlling the cache's behavior.
Introduce vm_object_set_memattr() for setting the default memory
attributes that will be given to an object's pages.
Introduce and use pmap_page_{get,set}_memattr() for getting and
setting a page's machine-dependent memory attributes. Add full
support for these functions on amd64 and i386 and stubs for them on
the other architectures. The function pmap_page_set_memattr() is also
responsible for any other machine-dependent aspects of changing a
page's memory attributes, such as flushing the cache or updating the
direct map. The uses include kmem_alloc_contig(), vm_page_alloc(),
and the device pager:
kmem_alloc_contig() can now be used to allocate kernel memory with
non-default memory attributes on amd64 and i386.
vm_page_alloc() and the device pager will set the memory attributes
for the real or fictitious page according to the object's default
memory attributes.
Update the various pmap functions on amd64 and i386 that map pages to
incorporate each page's memory attributes in the mapping.
Notes: (1) Inherent to this design are safety features that prevent
the specification of inconsistent memory attributes by different
mappings on amd64 and i386. In addition, the device pager provides a
warning when a device driver creates a fictitious page with memory
attributes that are inconsistent with the real page that the
fictitious page is an alias for. (2) Storing the machine-dependent
memory attributes for amd64 and i386 as a dedicated "int" in "struct
md_page" represents a compromise between space efficiency and the ease
of MFCing these changes to RELENG_7.
In collaboration with: jhb
Approved by: re (kib)
charge the objects created by vm_fault_copy_entry. The object charge
was set, but reserve not incremented.
Reported by: Greg Rivers <gcr+freebsd-current tharned org>
Reviewed by: alc (previous version)
Approved by: re (kensmith)
required by video card drivers. Specifically, this change introduces
vm_cache_mode_t with an appropriate VM_CACHE_DEFAULT definition on all
architectures. In addition, this changes adds a vm_cache_mode_t parameter
to kmem_alloc_contig() and vm_phys_alloc_contig(). These will be the
interfaces for allocating mapped kernel memory and physical memory,
respectively, with non-default cache modes.
In collaboration with: jhb
rlimit RLIMIT_SWAP that limits the amount of swap that may be reserved
for the uid.
The accounting information (charge) is associated with either map entry,
or vm object backing the entry, assuming the object is the first one
in the shadow chain and entry does not require COW. Charge is moved
from entry to object on allocation of the object, e.g. during the mmap,
assuming the object is allocated, or on the first page fault on the
entry. It moves back to the entry on forks due to COW setup.
The per-entry granularity of accounting makes the charge process fair
for processes that change uid during lifetime, and decrements charge
for proper uid when region is unmapped.
The interface of vm_pager_allocate(9) is extended by adding struct ucred *,
that is used to charge appropriate uid when allocation if performed by
kernel, e.g. md(4).
Several syscalls, among them is fork(2), may now return ENOMEM when
global or per-uid limits are enforced.
In collaboration with: pho
Reviewed by: alc
Approved by: re (kensmith)
with the malloc tag and calls a new back-end, kmem_alloc_contig(), that
allocates the pages and maps them.
The motivations for this change are two-fold: (1) A cache mode parameter
will be added to kmem_alloc_contig(). In other words, kmem_alloc_contig()
will be extended to support the allocation of memory with caller-specified
caching. (2) The UMA allocation function that is used by the two jumbo
frames zones can use kmem_alloc_contig() in place of contigmalloc() and
thereby avoid having free jumbo frames held by the zone counted as live
malloc()ed memory.
