WITH[OUT]_SSP to avoid hitting an error if user has WITH_SSP in their
make.conf. Ports now use this knob.
make[7]: "/usr/src/share/mk/bsd.own.mk" line 466: WITH_SSP and
WITHOUT_SSP can't both be set.
This is similar to previous cleanup done in r188895
Approved by: bapt
Reviewed by: jlh (earlier version)
Approved by: re (marius)
MFC after: 1 week
- libkern is missing __aeabi_llsl, implement this by calling __ashldi3.
- Because of how the asm entry macros are defined the boot2 code
requires the unwind symbols to exist, include them in boot2.
Approved by: re (marius)
and add support for default underride to $loader_version, acting as a way to
name a release. Release text is not displayed for the aforementioned feature
of alternate display layout (introduced in r254237); however, for all other
layouts (incl. default), the release name is displayed at lower-right.
See version.4th(8) for additional information and/or historical details.
NOTE: Also a minor edit to version.4th(8) while we're here.
The TI uart hardware is ns16550-compatible, except that before it can
be used the clocks and power have to be enabled and a non-standard
mode control register has to be set to put the device in uart mode
(as opposed to irDa or other serial protocols). This adds the extra
code in an extension to the standard ns8250 probe routine, and the
rest of the driver is just the standard ns8250 code.
The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a
couple quirks, which are now supported by sdhci(4) as of r254507.
This should work for all TI SoCs that use the MMCHS hardware, but it has
only been tested on AM335x right now, so this enables it on those platforms
but leaves the existing ti_mmchs driver in place for other OMAP variants
until they can be tested.
This initial incarnation lacks DMA support (coming soon). Even without it
this improves performance pretty noticibly over the ti_mmchs driver,
primarily because it now does multiblock IO.
Add support for A20 timer.
Correct interrupt offset depending from chip.
Add basic code for CPU configuration module.
For now, add kernel config and dts file
(only FDT blob related problem needs to be solved later in
order to have one kernel for both cubieboard1 and 2).
Approved by: ray@
being defined in <sys/diskmbr.h>. Instead give the symbols here a
"PC98_" prefix. This way, both <sys/diskmbr.h> and <sys/diskpc98.h>
can be included in the same C source file.
The renaming is trivial. The only gotcha is that DOSBBSECTOR is
also redefined from 0 to 1. This because DOSBBSECTOR was always
used in conjunction with an addition of 1. The PC98_BBSECTOR symbol
is defined as 1 and the expression is simplified.
Note: it is not believed that ports are seriously impacted; or at
all for that matter.
Approved by: nyan@
interpreter that can be run on the system and as such cannot be
compiled against libbstand. On the one hand this means we need to
include the usual headers for system interfaces that we use and
on the the other hand we can only use standard system interfaces.
While here, define local variables only when needed to make this
WARNS=2 clean on amd64.
PR: 172542
Obtained from: peterj@
Pointed out by: Jan Beich <jbeich@tormail.org>
isdir? ( fd -- bool )
freaddir ( fd -- ptr len TRUE | FALSE )
The 'isdir?' word returns `true' if the file descriptor is for a
directory and `false' otherwise.
The 'freaddir' word reads the next directory entry and if successful,
returns its name and 'true'. Otherwise 'false' is returned.
These words give the loader the ability to scan directories and read
files contained in them for 'rc.d'-like flexibility in handling which
modules to load and/or which tunables to set.
Obtained from: Juniper Networks, Inc.
in gpart(8) and boot(8), adding references to gptboot(8) in both.
Reviewed by: jhb, ae, pjd, Paul Schenkeveld <bsdcan@psconsult.nl>, david_a_bright@dell.com (portions), gjb
MFC after: 1 week
when booting from ZFS turned out to also cause the boot path not being
adjusted if booting from CD-ROM with firmware versions that do not employ
the "cdrom" alias in that case. So shuffle the code around instead in order
to achieve the original intent. Ideally, we shouldn't fiddle with the boot
path when booting from UFS on a disk either; unfortunately, there doesn't
seem to be an universal way of telling disks and CD-ROMs apart, though. [1]
- Use NULL instead of 0 for pointers.
PR: 179289
MFC after: 1 week
the beaglebone-specific .dts file.
Add a new .dts for the BeagleBone Black with more memory,
slightly different pinmux initialization, and with mmchs1
configured (though the latter doesn't quite work yet).
to driver specific files.
- window initialization is done during device attach
- CESA TDMA decoding windows values are set based on DTS,
not copied from CPU registers
- remove unnecessary virtual mapping
- update dts file
Obtained from: Semihalf
GDT from the correct segment, otherwise a triple fault would be caused.
In some virtual environments (VMware, VirtualBox, etc) this could lead
to a unhandled error or hang in the guest emulation software.
Thanks to avg and jhb for a few hints in the right direction.
Noticed by: Jeremy Chadwick <jdc@koitsu.org> (and many others)
MFC after: 1 week
(ARM uses 'int' and 'unsigned'; i386 uses 'long' and 'unsigned long'),
so we need explicit casts to long and unsigned long here to ensure
that the result matches the printf %ld and %lx specifiers.
they can easily be used by later post-processing. When searching for
a compiled-in fdt blob, use the section headers to get the size and
location of the .dynsym section to do a symbol search.
This fixes a problem where the search could overshoot the symbol
table and wander into the string table. Sometimes that was harmless
and sometimes it lead to spurious panic messages about an offset
bigger than the module size.
elf headers, mask out the high nibble of that address. This effectly makes
the entry point the offset from the load address, and it gets adjusted for
the actual load address before jumping to it.
Masking the high nibble makes assumptions about memory layout that are true
for all the arm platforms we support right now, but it makes me uneasy.
This needs to be revisited.
After digging through more carefully, it looks like there's
no real need to have the DTB in the module directory.
So we can simplify a lot: Just copy DTB into local heap
for "fdt addr" and U-Boot integration, drop all the extra
COPYIN() calls.
I've left one final COPYIN() to update the in-kernel DTB
for consistency with how this code used to work, but I'm
no longer convinced it's appropriate here.
I've also remove the mem_load_raw() utility that I added
to boot/common/module.c with r247045 since it's no longer
necessary.
initialized after FPIO controller since they might rely on GPIO
functionality
- Update interrupts property of dma node to contain all allocated
interrupts
This was broken by r247045 which tried to copy the FDT into the
module directory immediately.
Instead, store the address and arrange for the FDT to get
copied into the module directory later when the usual
FDT initialization runs.
machine/signal.h and machine/ucontext.h into common x86 includes,
copying from amd64 and merging with i386.
Kernel-only compat definitions are kept in the i386/include/sigframe.h
and i386/include/signal.h, to reduce amd64 kernel namespace pollution.
The amd64 compat uses its own definitions so far.
The _MACHINE_ELF_WANT_32BIT definition is to allow the
sys/boot/userboot/userboot/elf32_freebsd.c to use i386 ELF definitions
on the amd64 compile host. The same hack could be usefully abused by
other code too.
When initializing the fdt, query U-Boot as well.
With this change, it is now feasible to have U-Boot load
the FDT, ubldr will pull it from U-Boot and hand it to the
kernel.
This will be used by some upcoming changes to loader(8) FDT
handling to allow it to use an FDT provided by an earlier
boot stage the same as an FDT loaded from disk.
so that simultaneous access cannot happen. Protect scratch area using
the enumeration lock. Also reduce stack usage in usbd_transfer_setup()
by moving some big stack members to the scratch area. This saves around
200 bytes of stack.
- Fix a whitespace.
MFC after: 1 week
This adds support for version 10, revision 01, but it should also work
without changes for the 0901 model, at least until we get drivers for the
two different wifi chips involved.
Many users contributed to and tested the various patchsets floating around
for the past year that have eventually evolved into this checkin, most notably
Richard Neese who provided the bulk of the kernel config file.
Approved by: cognet (mentor)
comconsole setup. Previously the hint would be set when if you set a
custom port, but it would not be updated if you later set a custom speed.
Also, leave the hw.uart.console hint mutable so it can be overridden or
unset by the user if needed.
Reviewed by: kib (earlier version)
MFC after: 1 week
gcc handles -symbolic by passing -Bsymbolic through to ld. clang ignores
-symbolic and thus invokes ld without -Bsymbolic which leads to some symbols
not being properly linked in loader.efi. Fix this by using -Wl,-Bsymbolic which
passes -Bsymbolic to ld in both the gcc and clang cases.
Approved by: rpaulo
arch_zfs_probe method is supposed to only probe for ZFS vdevs, but it can
not expect that ZFS data is in a ready state yet.
So, move some code from sparc64_zfs_probe to main to meet the constraints.
Reported by: Chris Ross <cross+freebsd@distal.com>
Tested by: Chris Ross <cross+freebsd@distal.com>
MFC after: 4 days
r238966
Bump up the heap size to 1MB. With a few kernel modules, libstand
zalloc and userboot seem to want to use ~600KB of heap space, which
results in a segfault when malloc fails in bhyveload.
r241180
Clarify comment about default number of FICL dictionary cells.
r241153
Allow the number of FICL dictionary cells to be overridden.
Loading a 7.3 ISO with userboot/amd64 takes up 10035 cells,
overflowing the long-standing default of 10000.
Bump userboot's value up to 15000 cells.
Reviewed by: dteske (r238966,241180)
Obtained from: NetApp
Prior to r222417, setting `password' in loader.conf(5) did not prevent boot
but instead only prevented changes to boot options by prompting for password
if autoboot failed or the user interrupted the countdown sequence.
After r222417 the same machine with `password' set in loader.conf(5) would no
longer boot without _always_ entering the password.
This patch restores the old (8.x and older) functionality for password in
loader.conf(5) while adding a new bootlock_password feature to replace the
edge-case should anybody desire the regressed functionality (HINT: great for
PXE servers and/or private distributions).
loader.conf(5) was updated to be more clear with-respect to password setting
(previous text was misleading).
Documentation (loader.conf(5) and check-password.4th(8)) has been updated to
include notes on the new bootlock_password setting.
Special thanks to Alex Verbod for bringing this to my attention and helping to
refine the loader.conf(5) text.
PR: conf/170110
Submitted by: Vitaly Zakharov <ded3axap@gmail.com>
Reviewed by: Alexander Verbod <alexander.verbod@gmail.com>
Committed with changes to support the following from loader.conf(5):
+ console="vidconsole comconsole" (not just console="comconsole")
+ boot_serial="anything" (not just boot_serial="YES")
+ boot_multicons="anything" (unsupported in originally-submitted patch)
PR: conf/121064
Submitted by: koitsu
Reviewed by: gcooper, adrian (co-mentor)
Approved by: adrian (co-mentor)
