info about all currently mounted file systems. When an address is given
as an argument, prints detailed info about the given mount point.
MFC after: 2 weeks
from idle over the next tick.
- Add a new MD routine, cpu_wake_idle() to wakeup idle threads who are
suspended in cpu specific states. This function can fail and cause the
scheduler to fall back to another mechanism (ipi).
- Implement support for mwait in cpu_idle() on i386/amd64 machines that
support it. mwait is a higher performance way to synchronize cpus
as compared to hlt & ipis.
- Allow selecting the idle routine by name via sysctl machdep.idle. This
replaces machdep.cpu_idle_hlt. Only idle routines supported by the
current machine are permitted.
Sponsored by: Nokia
for better structure.
Much of this is related to <sys/clock.h>, which should really have
been called <sys/calendar.h>, but unless and until we need the name,
the repocopy can wait.
In general the kernel does not know about minutes, hours, days,
timezones, daylight savings time, leap-years and such. All that
is theoretically a matter for userland only.
Parts of kernel code does however care: badly designed filesystems
store timestamps in local time and RTC chips almost universally
track time in a YY-MM-DD HH:MM:SS format, and sometimes in local
timezone instead of UTC. For this we have <sys/clock.h>
<sys/time.h> on the other hand, deals with time_t, timeval, timespec
and so on. These know only seconds and fractions thereof.
Move inittodr() and resettodr() prototypes to <sys/time.h>.
Retain the names as it is one of the few surviving PDP/VAX references.
Move startrtclock() to <machine/clock.h> on relevant platforms, it
is a MD call between machdep.c/clock.c. Remove references to it
elsewhere.
Remove a lot of unnecessary <sys/clock.h> includes.
Move the machdep.disable_rtc_set sysctl to subr_rtc.c where it belongs.
XXX: should be kern.disable_rtc_set really, it's not MD.
explicitly select write locking for all use of the inpcb mutex.
Update some pcbinfo lock assertions to assert locked rather than
write-locked, although in practice almost all uses of the pcbinfo
rwlock main exclusive, and all instances of inpcb lock acquisition
are exclusive.
This change should introduce (ideally) little functional change.
However, it lays the groundwork for significantly increased
parallelism in the TCP/IP code.
MFC after: 3 months
Tested by: kris (superset of committered patch)
two ticks by counting the number of switches and the load when
sched_clock() is called.
- If the busy metric exceeds a threshold allow the idle thread to spin
waiting for new work for a brief period to avoid using IPIs. This
reduces the cost on the sender and receiver as well as reducing wakeup
latency considerably when it works.
Sponsored by: Nokia
variables and sysctl nodes.
- In reset walk the children of kern_sched_stats and reset the counters
via the oid_arg1 pointer. This allows us to add arbitrary counters to
the tree and still reset them properly.
- Define a set of switch types to be passed with flags to mi_switch().
These types are named SWT_*. These types correspond to SCHED_STATS
counters and are automatically handled in this way.
- Make the new SWT_ types more specific than the older switch stats.
There are now stats for idle switches, remote idle wakeups, remote
preemption ithreads idling, etc.
- Add switch statistics for ULE's pickcpu algorithm. These stats include
how much migration there is, how often affinity was successful, how
often threads were migrated to the local cpu on wakeup, etc.
Sponsored by: Nokia
filesystem-specific vnode data to the struct vnode. Provide the
default implementation for the vop_advlock and vop_advlockasync.
Purge the locks on the vnode reclaim by using the lf_purgelocks().
The default implementation is augmented for the nfs and smbfs.
In the nfs_advlock, push the Giant inside the nfs_dolock.
Before the change, the vop_advlock and vop_advlockasync have taken the
unlocked vnode and dereferenced the fs-private inode data, racing with
with the vnode reclamation due to forced unmount. Now, the vop_getattr
under the shared vnode lock is used to obtain the inode size, and
later, in the lf_advlockasync, after locking the vnode interlock, the
VI_DOOMED flag is checked to prevent an operation on the doomed vnode.
The implementation of the lf_purgelocks() is submitted by dfr.
Reported by: kris
Tested by: kris, pho
Discussed with: jeff, dfr
MFC after: 2 weeks
o Implement IPI_PREEMPT,
o Set td_lock for the thread being switched out,
o For ULE & SMP, loop while td_lock points to blocked_lock for
the thread being switched in,
o Enable ULE by default in GENERIC and SKI,
public namespace for WITNESS as they are only used internally so just
move them in the private namespace for the subsystem (with all related
supporting definitions).
under bootverbose.
Struct ct is used for setting/reading real time clocks and I'm about
to Do Things to some of those, so a bit of preemptive debugging is
in order.
Remove a pointless __inline.
the only one difference is that lockmgr*() functions now accept
LK_NOWITNESS flag which skips ordering for the instanced calling.
- Remove an unuseful stub in witness_checkorder() (because the above check
doesn't allow ever happening) and allow witness_upgrade() to accept
non-try operation too.
lookup hard interrupt events by number. Ignore the irq# for soft intrs.
- Add support to cpuset for binding hardware interrupts. This has the
side effect of binding any ithread associated with the hard interrupt.
As per restrictions imposed by MD code we can only bind interrupts to
a single cpu presently. Interrupts can be 'unbound' by binding them
to all cpus.
Reviewed by: jhb
Sponsored by: Nokia
no longer needed, but for now we still want to be consistent with other
similar checks in the tree.
- Call ASSERT_VOP_ELOCKED() only when vget() returns 0.
Reviewed by: jeff
o create a private task queue thread that sets up root and current
directories (hooking mountroot event as needed); this is necessary
because task queue threads are parented from proc0 and it does not
have a reference to rootvnode (lost when / mounting moved to init)
o bounce image load + unload requests through the private task q so
we can load images even when the request is made from a thread that
does not have sufficient context (e.g. task q thread)
o add a check in the task q thread to fail requests before root is
mounted (just in case)
Reviewed by: jhb, mlaier, luigi (glance)
MFC after: 1 month
bit in order to allow per-bit checks on the options flag, in particular
in the consumers code [1]
- Re-enable the check against TDP_DEADLKTREAT as the anti-waiters
starvation patch allows exclusive waiters to override new shared
requests.
[1] Requested by: pjd, jeff
state transitioning flags and of msleep(9) callings.
Use, instead, an algorithm very similar to what sx(9) and rwlock(9)
alredy do and direct accesses to the sleepqueue(9) primitive.
In order to avoid writer starvation a mechanism very similar to what
rwlock(9) uses now is implemented, with the correspective per-thread
shared lockmgrs counter.
This patch also adds 2 new functions to lockmgr KPI: lockmgr_rw() and
lockmgr_args_rw(). These two are like the 2 "normal" versions, but they
both accept a rwlock as interlock. In order to realize this, the general
lockmgr manager function "__lockmgr_args()" has been implemented through
the generic lock layer. It supports all the blocking primitives, but
currently only these 2 mappers live.
The patch drops the support for WITNESS atm, but it will be probabilly
added soon. Also, there is a little race in the draining code which is
also present in the current CVS stock implementation: if some sharers,
once they wakeup, are in the runqueue they can contend the lock with
the exclusive drainer. This is hard to be fixed but the now committed
code mitigate this issue a lot better than the (past) CVS version.
In addition assertive KA_HELD and KA_UNHELD have been made mute
assertions because they are dangerous and they will be nomore supported
soon.
In order to avoid namespace pollution, stack.h is splitted into two
parts: one which includes only the "struct stack" definition (_stack.h)
and one defining the KPI. In this way, newly added _lockmgr.h can
just include _stack.h.
Kernel ABI results heavilly changed by this commit (the now committed
version of "struct lock" is a lot smaller than the previous one) and
KPI results broken by lockmgr_rw() / lockmgr_args_rw() introduction,
so manpages and __FreeBSD_version will be updated accordingly.
Tested by: kris, pho, jeff, danger
Reviewed by: jeff
Sponsored by: Google, Summer of Code program 2007
allows all the INTR_FILTER #ifdef's to be removed from the MD interrupt
code.
- Rename the intr_event 'eoi', 'disable', and 'enable' hooks to
'post_filter', 'pre_ithread', and 'post_ithread' to be less x86-centric.
Also, add a comment describe what the MI code expects them to do.
- On amd64, i386, and powerpc this is effectively a NOP.
- On arm, don't bother masking the interrupt unless the ithread is
scheduled in the non-INTR_FILTER case to match what INTR_FILTER did.
Also, don't bother unmasking the interrupt in the post_filter case if
we never masked it. The INTR_FILTER case had been doing this by having
arm_unmask_irq for the post_filter (formerly 'eoi') hook.
- On ia64, stray interrupts are now masked for the non-INTR_FILTER case.
They were already masked in the INTR_FILTER case.
- On sparc64, use the a NULL pre_ithread hook and use intr_enable_eoi() for
both the 'post_filter' and 'post_ithread' hooks to match what the
non-INTR_FILTER code did.
- On sun4v, retire the ithread wrapper hack by using an appropriate
'post_ithread' hook instead (it's what 'post_ithread'/'enable' was
designed to do even in 5.x).
Glanced at by: piso
Reviewed by: marius
Requested by: marius [1], [5]
Tested on: amd64, i386, arm, sparc64
UMA_SLAB_KERNEL for consistency with its sibling UMA_SLAB_KMEM.
(UMA_SLAB_KMAP met its original demise in revision 1.30 of
vm/uma_core.c.) UMA_SLAB_KERNEL is now required by the jumbo frame
allocators. Without it, UMA cannot correctly return pages from the
jumbo frame zones to the VM system because it resets the pages' object
field to NULL instead of the kernel object. In more detail, the jumbo
frame zones are created with the option UMA_ZONE_REFCNT. This causes
UMA to overwrite the pages' object field with the address of the slab.
However, when UMA wants to release these pages, it doesn't know how to
restore the object field, so it sets it to NULL. This change teaches
UMA how to reset the object field to the kernel object.
Crashes reported by: kris
Fix tested by: kris
Fix discussed with: jeff
MFC after: 6 weeks
spinning when readers hold a lock. This spinning is speculative because,
unlike the write case, we can not test whether the owners are running.
- Add speculative read spinning for readers who are blocked by pending
writers while a read lock is still held. This allows the thread to
spin until the write lock succeeds after which it may spin until the
writer has released the lock. This prevents excessive context switches
when readers and writers both hold the lock for brief periods.
Sponsored by: Nokia
fixed pri boost with '1' or any priority less than the current thread's
priority with a value greater than two. Default the boost to
PRI_MIN_TIMESHARE to prevent regular user-space threads from starving
threads in the kernel. This prevents these user-threads from also
being scheduled as if they are high fixed-priority kernel threads.
- Restore the setting of lowpri in tdq_choose(). It has to be either here
or in sched_switch(). I accidentally removed it from both places.
Tested by: kris
do this either. Simply check P_NOLOAD. It'd be nice if this was
in a thread flag so we didn't have an extra cache miss every time we
add and remove a thread from the run-queue.
- Move callout thread creation from kern_intr.c to kern_timeout.c
- Call callout_tick() on every processor via hardclock_cpu() rather than
inspecting callout internal details in kern_clock.c.
- Remove callout implementation details from callout.h
- Package up all of the global variables into a per-cpu callout structure.
- Start one thread per-cpu. Threads are not strictly bound. They prefer
to execute on the native cpu but may migrate temporarily if interrupts
are starving callout processing.
- Run all callouts by default in the thread for cpu0 to maintain current
ordering and concurrency guarantees. Many consumers may not properly
handle concurrent execution.
- The new callout_reset_on() api allows specifying a particular cpu to
execute the callout on. This may migrate a callout to a new cpu.
callout_reset() schedules on the last assigned cpu while
callout_reset_curcpu() schedules on the current cpu.
Reviewed by: phk
Sponsored by: Nokia
These functions try the specified operation (rlocking and wlocking) and
true is returned if the operation completes, false otherwise.
The KPI is enriched by this commit, so __FreeBSD_version bumping and
manpage updating will happen soon.
Requested by: jeff, kris
openat(2), faccessat(2), fchmodat(2), fchownat(2), fstatat(2),
futimesat(2), linkat(2), mkdirat(2), mkfifoat(2), mknodat(2),
readlinkat(2), renameat(2), symlinkat(2)
syscalls.
Based on the submission by rdivacky,
sponsored by Google Summer of Code 2007
Reviewed by: rwatson, rdivacky
Tested by: pho
incompatible with existing bindings.
- Try to copyout the setid in cpuset() before migrating the proc to the
setid in case the user has supplied a bad buffer.
- Rename cpuset_root() and cpuset_base() to cpuset_ref{root,base} to
be more descriptive and free cpuset_root to be used as a different
type of symbol.
- Make cpuset_root the cpuset_t set of all cpus in the system. This
should contain the same bitmask as all_cpus presently.
- Add a CPU_CMP() macro to compare two sets.
which simply want a reference should use vref(). Callers which want
to check validity need to hold a lock while performing any action
based on that validity. vn_lock() would always release the interlock
before returning making any action synchronous with the validity check
impossible.
dropped after the call to lockmgr() so just revert this approach using
something similar to the precedent one:
BUF_LOCKWAITERS() just checks if there are waiters (not the actual number
of them) and it is based on newly introduced lockmgr_waiters() which
returns if the lockmgr has waiters or not. The name has been choosen
differently by old lockwaiters() in order to not confuse them.
KPI results enriched by this commit so __FreeBSD_version bumping and
manpage update will be happening soon.
'struct buf' also changes, so kernel ABI is disturbed.
Bug found by: jeff
Approved by: jeff, kib
these days, so de-generalize the acquire_timer/release_timer api
to just deal with speakers.
The new (optional) MD functions are:
timer_spkr_acquire()
timer_spkr_release()
and
timer_spkr_setfreq()
the last of which configures the timer to generate a tone of a given
frequency, in Hz instead of 1/1193182th of seconds.
Drop entirely timer2 on pc98, it is not used anywhere at all.
Move sysbeep() to kern/tty_cons.c and use the timer_spkr*() if
they exist, and do nothing otherwise.
Remove prototypes and empty acquire-/release-timer() and sysbeep()
functions from the non-beeping archs.
This eliminate the need for the speaker driver to know about
i8254frequency at all. In theory this makes the speaker driver MI,
contingent on the timer_spkr_*() functions existing but the driver
does not know this yet and still attaches to the ISA bus.
Syscons is more tricky, in one function, sc_tone(), it knows the hz
and things are just fine.
In the other function, sc_bell() it seems to get the period from
the KDMKTONE ioctl in terms if 1/1193182th second, so we hardcode
the 1193182 and leave it at that. It's probably not important.
Change a few other sysbeep() uses which obviously knew that the
argument was in terms of i8254 frequency, and leave alone those
that look like people thought sysbeep() took frequency in hertz.
This eliminates the knowledge of i8254_freq from all but the actual
clock.c code and the prof_machdep.c on amd64 and i386, where I think
it would be smart to ask for help from the timecounters anyway [TBD].
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.
Highlights include:
* Thread-safe kernel RPC client - many threads can use the same RPC
client handle safely with replies being de-multiplexed at the socket
upcall (typically driven directly by the NIC interrupt) and handed
off to whichever thread matches the reply. For UDP sockets, many RPC
clients can share the same socket. This allows the use of a single
privileged UDP port number to talk to an arbitrary number of remote
hosts.
* Single-threaded kernel RPC server. Adding support for multi-threaded
server would be relatively straightforward and would follow
approximately the Solaris KPI. A single thread should be sufficient
for the NLM since it should rarely block in normal operation.
* Kernel mode NLM server supporting cancel requests and granted
callbacks. I've tested the NLM server reasonably extensively - it
passes both my own tests and the NFS Connectathon locking tests
running on Solaris, Mac OS X and Ubuntu Linux.
* Userland NLM client supported. While the NLM server doesn't have
support for the local NFS client's locking needs, it does have to
field async replies and granted callbacks from remote NLMs that the
local client has contacted. We relay these replies to the userland
rpc.lockd over a local domain RPC socket.
* Robust deadlock detection for the local lock manager. In particular
it will detect deadlocks caused by a lock request that covers more
than one blocking request. As required by the NLM protocol, all
deadlock detection happens synchronously - a user is guaranteed that
if a lock request isn't rejected immediately, the lock will
eventually be granted. The old system allowed for a 'deferred
deadlock' condition where a blocked lock request could wake up and
find that some other deadlock-causing lock owner had beaten them to
the lock.
* Since both local and remote locks are managed by the same kernel
locking code, local and remote processes can safely use file locks
for mutual exclusion. Local processes have no fairness advantage
compared to remote processes when contending to lock a region that
has just been unlocked - the local lock manager enforces a strict
first-come first-served model for both local and remote lockers.
Sponsored by: Isilon Systems
PR: 95247 107555 115524 116679
MFC after: 2 weeks
the owner of a queue to block and unblock execution of the tasks in the
queue while allowing tasks to continue to be added queue. Combining this
with taskqueue_drain() allows a queue to be safely disabled. The unblock
function may run (or schedule to run) the queue when it is called, just as
calling taskqueue_enqueue() would.
Reviewed by: jhb, sam
Removed dead code that assumed that M_TRYWAIT can return NULL; it's not true
since the advent of MBUMA.
Reviewed by: arch
There are ongoing disputes as to whether we want to switch to directly using
UMA flags M_WAITOK/M_NOWAIT for mbuf(9) allocation.
references to a vnode with VI_OWEINACT set will force the vinactive()
call. The kernel makes no guarantees about which reference was the
last to close a file or when the actual inactive processing will
happen. The previous code was designed to preserve existing semantics
in the face of shared locks, however, this was unnecessary.
Discussed with: mckusick
is requested. Handle this case specially before the while loop.
- Use the held vnode lock to check for VI_DOOMED. The vnode lock and
interlock must both be held to set VI_DOOMED so either one held, even
shared, is sufficient to check it.
No objection by: kib
vnodes belonging to the mountpoint. Also, yield when in the
softdep_process_worklist() even when we are not going to sleep due to
buffer drain.
It is believed that the ULE fixed the problem [1], but the yielding
seems to be needed at least for the 4BSD case.
Discussed: on stable@, with bde
Reviewed by: tegge, jeff [1]
MFC after: 2 weeks
BO_LOCK/UNLOCK/MTX when manipulating the bufobj.
- Create a new lock in the bufobj to lock bufobj fields independently.
This leaves the vnode interlock as an 'identity' lock while the bufobj
is an io lock. The bufobj lock is ordered before the vnode interlock
and also before the mnt ilock.
- Exploit this new lock order to simplify softdep_check_suspend().
- A few sync related functions are marked with a new XXX to note that
we may not properly interlock against a non-zero bv_cnt when
attempting to sync all vnodes on a mountlist. I do not believe this
race is important. If I'm wrong this will make these locations easier
to find.
Reviewed by: kib (earlier diff)
Tested by: kris, pho (earlier diff)
code.
The bug:
There exists a race condition for timeout/untimeout(9) due to the
way that the softclock thread dequeues timeouts.
The softclock thread sets the c_func and c_arg of the callout to
NULL while holding the callout lock but not Giant. It then drops
the callout lock and acquires Giant.
It is at this point where untimeout(9) on another cpu/thread could
be called.
Since c_arg and c_func are cleared, untimeout(9) does not touch the
callout and returns as if the callout is canceled.
The softclock then tries to acquire Giant and likely blocks due to
the other cpu/thread holding it.
The other cpu/thread then likely deallocates the backing store that
c_arg points to and finishes working and hence drops Giant.
Softclock resumes and acquires giant and calls the function with
the now free'd c_arg and we have corruption/crash.
The fix:
We need to track curr_callout even for timeout(9) (LOCAL_ALLOC)
callouts. We need to free the callout after the softclock processes
it to deal with the race here.
Obtained from: Juniper Networks, iedowse
Reviewed by: jhb, iedowse
MFC After: 2 weeks.
around the check for the BV_BKGRDINPROG in the brelse() and bqrelse().
See the comment for the explanation why it is safe.
Tested by: pho
Submitted by: jeff
to enter thread_suspend_check().
- Set TDF_ASTPENDING along with TDF_NEEDSUSPCHK so we can move the
thread_suspend_check() to ast() rather than userret().
- Check TDF_NEEDSUSPCHK in the sleepq_catch_signals() optimization so
that we don't miss a suspend request. If this is set use the
expensive signal path.
- Set NEEDSUSPCHK when creating a new thread in thr in case the
creating thread is due to be suspended as well but has not yet.
Reviewed by: davidxu (Authored original patch)
resource to a CPU. The default method is to pass the request up to the
parent similar to BUS_CONFIG_INTR() so that all busses don't have to
explicitly implement bus_bind_intr. A bus_bind_intr(9) wrapper routine
similar to bus_setup/teardown_intr() is added for device drivers to use.
Unbinding an interrupt is done by binding it to NOCPU. The IRQ resource
must be allocated, but it can happen in any order with respect to
bus_setup_intr(). Currently it is only supported on amd64 and i386 via
nexus(4) methods that simply call the intr_bind() routine.
Tested by: gallatin
rqindex back in struct thread.
- Compile kern_switch.c independently again and stop #include'ing it from
schedulers.
- Remove the ts_thread backpointers and convert most code to go from
struct thread to struct td_sched.
- Cleanup the ts_flags #define garbage that was causing us to sometimes
do things that expanded to td->td_sched->ts_thread->td_flags in 4BSD.
- Export the kern.sched sysctl node in sysctl.h
thread_fini(). The schedulers initialize themselves properly during
sched_fork_thread() anyhow. fini is only called when we're returning
the memory to the allocator which surely doesn't care what state the
memory is in.
is only used by 4bsd.
- Create a new runq_choose_fuzz() function rather than polluting runq_choose()
with 4BSD specific code.
- Move the fuzz sysctl into sched_4bsd.c
- Remove some dead code from kern_switch.c
maxsockets limit, not maxfiles limit. The question remains why those
limits are handled differently (with error code for maxfiles but with
sleep for maxsokets), but those would be addressed in a separate commit
if necessary.
Requested by: rwhatson, jeff
before doing the very expensive cursig() and related locking. NEEDSIGCHK
is updated whenever our signal mask change or when a signal is delivered and
should be sufficient to avoid the more expensive tests. This eliminates
another source of PROC_LOCK contention in multithreaded programs.
- In the last revision the code was changed to use maxfilesperproc rather than
the per-process file limit to restrict the size of the poll array. This
eliminates a significant source of process lock contention in multithreaded
programs and is cheaper. This had been committed with the wrong batch of
changes.
a simple (wmesg, count) tuple in a hash to keep track of how many times
we sleep at each wait message. We hash on message and not channel. No
line number information is given as typically wait messages are not used in
more than one place. Identical strings defined at different addresses will
show up with seperate counters.
- Use debug.sleepq.enable to enable, .reset to reset, and .stats dumps stats.
- Do an unsynchronized check in sleepq_switch() prior to switching before
calling sleepq_profile() which uses a global lock to synchronize the hash.
Only sleeps which actually cause a context switch are counted.
1.38 in 2001. Break out of the FOREACH_THREAD_IN_PROC loop when we've
discovered a new proc in the chain.
- Increment i and check for maxlockdepth once per matching process not
once per thread. This didn't properly terminate the loop before.
- Fix a bug which has existed potentially since rev 1.1. waitblock->lf_next
can be NULL when a thread has been woken-up but not yet scheduled. Check
for this condition rather than blindly dereferencing.
Found by: libMicro
requiring the per-process spinlock to only requiring the process lock.
- Reflect these changes in the proc.h documentation and consumers throughout
the kernel. This is a substantial reduction in locking cost for these
fields and was made possible by recent changes to threading support.
- Always include the ie_disable and ie_eoi methods in 'struct intr_event'
and collapse down to one intr_event_create() routine. The disable and
eoi hooks simply aren't used currently in the !INTR_FILTER case.
- Expand 'disab' to 'disable' in a few places.
- Use function casts for arm and i386:intr_eoi_src() instead of wrapper
routines since to trim one extra indirection.
Compiled on: {arm,amd64,i386,ia64,ppc,sparc64} x {FILTER, !FILTER}
Tested on: {amd64,i386} x {FILTER, !FILTER}
drivers.
In the giant_XXX wrappers for the device methods of the D_NEEDGIANT
drivers, do not dereference the cdev->si_devsw. It is racing with
the destroy_devl() clearing of the si_devsw. Instead, use the
dev_refthread() and return ENXIO for the destroyed device. [1]
The check for the D_INIT in the prep_cdevsw() was not synchronized with
the call of the fini_cdevsw() in destroy_devl(), that under rapid device
creation/destruction may result in the use of uninitialized cdevsw [2].
Change the protocol for the prep_cdevsw(), requiring it to be called
under dev_mtx, where the check for D_INIT is done.
Do not free the memory allocated for the gianttrick cdevsw while holding
the dev_mtx, put it into the free list to be freed later. Reuse the
d_gianttrick pointer to keep the size and layout of the struct cdevsw
(requested by phk). Free the memory in the dev_unlock_and_free(), and do
all the free after the dev_mtx is dropped (suggested by jhb).
Reported by: bsdimp + many [1], pho [2]
Reviewed by: phk, jhb
Tested by: pho
MFC after: 1 week
uidinfo structure. This entirely removes contention observed on the
ui_mtxp mutex (as it is now gone).
- Convert the uihashtbl_mtx mutex to a rwlock, as most of the time we just
need to read-lock it.
Reviewed by: jhb, jeff, kris & others
Tested by: kris
a jail, etc. by simply calling setpriority(PRIO_PROCESS, <PID>, 0) and
checking the return value: 0 means that the process exists and -1 that
it doesn't exist.
Reviewed by: rwatson
MFC after: 1 week
after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
Otherwise the parameter is no-op, since zone by default limits number
of descriptors to some 12K entries. Attempt to allocate more ends up
sleeping on zonelimit.
MFC after: 2 weeks
- Add a new intr_event method ie_assign_cpu() that is invoked when the MI
code wishes to bind an interrupt source to an individual CPU. The MD
code may reject the binding with an error. If an assign_cpu function
is not provided, then the kernel assumes the platform does not support
binding interrupts to CPUs and fails all requests to do so.
- Bind ithreads to CPUs on their next execution loop once an interrupt
event is bound to a CPU. Only shared ithreads are bound. We currently
leave private ithreads for drivers using filters + ithreads in the
INTR_FILTER case unbound.
- A new intr_event_bind() routine is used to bind an interrupt event to
a CPU.
- Implement binding on amd64 and i386 by way of the existing pic_assign_cpu
PIC method.
- For x86, provide a 'intr_bind(IRQ, cpu)' wrapper routine that looks up
an interrupt source and binds its interrupt event to the specified CPU.
MI code can currently (ab)use this by doing:
intr_bind(rman_get_start(irq_res), cpu);
however, I plan to add a truly MI interface (probably a bus_bind_intr(9))
where the implementation in the x86 nexus(4) driver would end up calling
intr_bind() internally.
Requested by: kmacy, gallatin, jeff
Tested on: {amd64, i386} x {regular, INTR_FILTER}
- Close a sleepqueue signal race by interlocking with the per-process
spinlock. This was mistakenly omitted from the thread_lock patch and
has been a race since.
MFC After: 1 week
PR: bin/117603
Reported by: Danny Braniss <danny@cs.huji.ac.il>
While the KSE project was quite successful in bringing threading to
FreeBSD, the M:N approach taken by the kse library was never developed
to its full potential. Backwards compatibility will be provided via
libmap.conf for dynamically linked binaries and static binaries will
be broken.
sched_sleep(). This removes extra thread_lock() acquisition and
allows the scheduler to decide what to do with the static boost.
- Change the priority arguments to cv_* to match sleepq/msleep/etc.
where 0 means no priority change. Catch -1 in cv_broadcastpri() and
convert it to 0 for now.
- Set a flag when sleeping in a way that is compatible with swapping
since direct priority comparisons are meaningless now.
- Add a sysctl to ule, kern.sched.static_boost, that defaults to on which
controls the boost behavior. Turning it off gives better performance
in some workloads but needs more investigation.
- While we're modifying sleepq, change signal and broadcast to both
return with the lock held as the lock was held on enter.
Reviewed by: jhb, peter
tdq_runq_add to select the runq rather than hoping we set it properly
when we adjusted the priority. This involves the same number of
branches as before so should perform identically without the extra
fragility.
Tested by: bz
Reviewed by: bz
- Only calculate timeshare priorities once per tick or when a thread is woken
from sleeping.
- Keep the ts_runq pointer valid after all priority changes.
- Call tdq_runq_add() directly from sched_switch() without passing in via
tdq_add(). We don't need to adjust loads or runqs anymore.
- Sort tdq and ts_sched according to utilization to improve cache behavior.
Sponsored by: Nokia
- Normalize the preemption/ipi setting code by introducing sched_shouldpreempt()
so the logical is identical and not repeated between tdq_notify() and
sched_setpreempt().
- In tdq_notify() don't set NEEDRESCHED as we may not actually own the thread lock
this could have caused us to lose td_flags settings.
- Garbage collect some tunables that are no longer relevant.
know if has siblings that need an actual probe. Introduce a specail
return value called BUS_PROBE_NOOWILDCARD. If the driver returns
this, the probe is only successful for devices that have had a
specific devclass set for them.
Reviewed by: current@, jhb@, grehan@
Solaris and AIX.
fcntl(fd, F_DUP2FD, arg) and dup2(fd, arg) are functionnaly equivalent.
Document it.
Add some regression tests (identical to the dup2(2) regression tests).
PR: 120233
Submitted by: Jukka Ukkonen
Approved by: rwaston (mentor)
MFC after: 1 month
process lock leading to a hang. This bug was introduced in
kern_sig.c:1.351, when the call to expand_name() was moved earlier
bit this particular error case was not updated.
passing it to cpuset_which(). Pass in 'set' instead. This argument
is not used but for convenience cpuset_which() nulls all incoming
parameters.
Submitted by: davidxu
mask none of the upper bits are set.
- Be more careful about enforcing the boundaries of masks and child sets.
- Introduce a few more CPU_* macros for implementing these tests.
- Change the cpusetsize argument to be bytes rather than bits to match
other apis.
Sponsored by: Nokia
The PQ3 is a high performance integrated communications processing system
based on the e500 core, which is an embedded RISC processor that implements
the 32-bit Book E definition of the PowerPC architecture. For details refer
to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC8555E
This port was tested and successfully run on the following members of the PQ3
family: MPC8533, MPC8541, MPC8548, MPC8555.
The following major integrated peripherals are supported:
* On-chip peripherals bus
* OpenPIC interrupt controller
* UART
* Ethernet (TSEC)
* Host/PCI bridge
* QUICC engine (SCC functionality)
This commit brings the main functionality and will be followed by individual
drivers that are logically separate from this base.
Approved by: cognet (mentor)
Obtained from: Juniper, Semihalf
MFp4: e500
- When searching for affinity search backwards in the tree from the last
cpu we ran on while the thread still has affinity for the group. This
can take advantage of knowledge of shared L2 or L3 caches among a
group of cores.
- When searching for the least loaded cpu find the least loaded cpu via
the least loaded path through the tree. This load balances system bus
links, individual cache levels, and hyper-threaded/SMT cores.
- Make the periodic balancer recursively balance the highest and lowest
loaded cpu across each link.
Add support for cpusets:
- Convert the cpuset to a simple native cpumask_t while the kernel still
only supports cpumask.
- Pass the derived cpumask down through the cpu_search functions to
restrict the result cpus.
- Make the various steal functions resilient to failure since all threads
can not run on all cpus any longer.
General improvements:
- Precisely track the lowest priority thread on every runq with
tdq_setlowpri(). Before it was more advisory but this ended up having
pathological behaviors.
- Remove many #ifdef SMP conditions to simplify the code.
- Get rid of the old cumbersome tdq_group. This is more naturally
expressed via the cpu_group tree.
Sponsored by: Nokia
Testing by: kris
tree structure that encodes the level of cache sharing and other
properties.
- Provide several convenience functions for creating one and two level
cpu trees as well as a default flat topology. The system now always
has some topology.
- On i386 and amd64 create a seperate level in the hierarchy for HTT
and multi-core cpus. This will allow the scheduler to intelligently
load balance non-uniform cores. Presently we don't detect what level
of the cache hierarchy is shared at each level in the topology.
- Add a mechanism for testing common topologies that have more information
than the MD code is able to provide via the kern.smp.topology tunable.
This should be considered a debugging tool only and not a stable api.
Sponsored by: Nokia
and assignment.
- Add a reference to a struct cpuset in each thread that is inherited from
the thread that created it.
- Release the reference when the thread is destroyed.
- Add prototypes for syscalls and macros for manipulating cpusets in
sys/cpuset.h
- Add syscalls to create, get, and set new numbered cpusets:
cpuset(), cpuset_{get,set}id()
- Add syscalls for getting and setting affinity masks for cpusets or
individual threads: cpuid_{get,set}affinity()
- Add types for the 'level' and 'which' parameters for the cpuset. This
will permit expansion of the api to cover cpu masks for other objects
identifiable with an id_t integer. For example, IRQs and Jails may be
coming soon.
- The root set 0 contains all valid cpus. All thread initially belong to
cpuset 1. This permits migrating all threads off of certain cpus to
reserve them for special applications.
Sponsored by: Nokia
Discussed with: arch, rwatson, brooks, davidxu, deischen
Reviewed by: antoine
than rely on the lockmgr support [1]:
* bump the waiters only if the interlock is held
* let brelvp() return the waiters count
* rely on brelvp() instead than BUF_LOCKWAITERS() in order to check
for the waiters number
- Remove a namespace pollution introduced recently with lockmgr.h
including lock.h by including lock.h directly in the consumers and
making it mandatory for using lockmgr.
- Modify flags accepted by lockinit():
* introduce LK_NOPROFILE which disables lock profiling for the
specified lockmgr
* introduce LK_QUIET which disables ktr tracing for the specified
lockmgr [2]
* disallow LK_SLEEPFAIL and LK_NOWAIT to be passed there so that it
can only be used on a per-instance basis
- Remove BUF_LOCKWAITERS() and lockwaiters() as they are no longer
used
This patch breaks KPI so __FreBSD_version will be bumped and manpages
updated by further commits. Additively, 'struct buf' changes results in
a disturbed ABI also.
[2] Really, currently there is no ktr tracing in the lockmgr, but it
will be added soon.
[1] Submitted by: kib
Tested by: pho, Andrea Barberio <insomniac at slackware dot it>
the vnode interlock is not held. vn_printf() already correctly handles
locked and unlocked vnode interlocks, and all the in-tree vop_print
methods are interlock-agnostic.
Some code calls vprintf() with the vnode interlock held, that causes
unjustified panics with INVARIANTS (ffs_syncvnode() as example).
Reported by: Peter Holm
always curthread.
As KPI gets broken by this patch, manpages and __FreeBSD_version will be
updated by further commits.
Tested by: Andrea Barberio <insomniac at slackware dot it>
namespace in order to handle lockmgr fields in a controlled way instead
than spreading all around bogus stubs:
- VN_LOCK_AREC() allows lock recursion for a specified vnode
- VN_LOCK_ASHARE() allows lock sharing for a specified vnode
In FFS land:
- BUF_AREC() allows lock recursion for a specified buffer lock
- BUF_NOREC() disallows recursion for a specified buffer lock
Side note: union_subr.c::unionfs_node_update() is the only other function
directly handling lockmgr fields. As this is not simple to fix, it has
been left behind as "sole" exception.
the provided trailers. This has been broken since revision 1.240.
Submitted by: Dan Nelson
PR: kern/120948
"sounds ok to me" from: phk
MFC after: 3 days
consists of the null-terminated name and the contents of any structure
you wish to record. A new ktrstruct() function constructs and emits a
KTR_STRUCT record. It is accompanied by convenience macros for struct
stat and struct sockaddr.
In kdump(1), KTR_STRUCT records are handled by a dispatcher function
that runs stringent sanity checks on its contents before handing it
over to individual decoding funtions for each type of structure.
Currently supported structures are struct stat and struct sockaddr for
the AF_INET, AF_INET6 and AF_UNIX families; support for AF_APPLETALK
and AF_IPX is present but disabled, as I am unable to test it properly.
Since 's' was already taken, the letter 't' is used by ktrace(1) to
enable KTR_STRUCT trace points, and in kdump(1) to enable their
decoding.
Derived from patches by Andrew Li <andrew2.li@citi.com>.
PR: kern/117836
MFC after: 3 weeks
