It appears that the same arches that lack GENERIC kernel configs also lack
LINT. But enough different arches get built to ensure a kernel change
should build everywhere (32 and 64 bit, clang and old gcc, little and big
endian).
just the GENERIC kernels for each arch (including variations such as
GENERIC-NODEBUG, GENERIC64, etc).
This helps with quickly doing a test build for all[*] arches without
building dozens of variant kernels for the arches that have lots of
hardware/board/system variations.
[*] Not all arches have a generic kernel (but they probably should for
test-building purposes, even if it can't boot on any real hardware).
Normally META_MODE ignores host files for "meta mode" decisions on whether a
file should be rebuilt or not. This is because a simple installworld can
update timestamps and cause the next build to rebuild all host tools, when the
previous ones may not have any changes in the source tree. These tools are
normally still ABI compatible. They are only rebuilt if NO_META_IGNORE_HOST is
set from the workaround/hack in r301467.
One of the major problems with this is when a host tool has objects spread
across many revisions that have mixed-ABI. For example, if struct stat were to
change on the host, some objects for a tool may have different ideas of that
struct's definition. If just 1 source file were modified and rebuilt and
linked into the tool, then that toll will have mixed-ABI objects and crash.
This exact thing happened with the ino64 commit in r301467 followed by a
trivial update to libbfd in r318750. The resulting binary would crash in
buildworld.
Sponsored by: Dell EMC Isilon
Right after cross-tools, a compiler-metadata.mk file is created that
stores all of the bsd.compiler.mk metadata. It is then read in
with a fail-safe during installworld time.
The file is explicitly removed when invoking cross-tools to ensure that
a stale file is not left around from odd manual 'make _cross-tools' ->
'make installworld' invocations.
This fixes several issues:
- With WITH_SYSTEM_COMPILER (default yes on head and no on releng/11.0):
If you build on a system where the bootstrap compiler does not
build due to the host compiler matching the in-tree one, but then
installworld on another system where that logic fails (a
bootstrap compiler is needed), the installworld immediately fails
with:
sh: cc: not found
Note that fixing this logic may then hit a case where a rebuild is
attempted in installworld. Normally cc would be ran with
'CFLAGS+=ERROR-tried-to-rebuild-during-make-install' to cause an
error such as:
cc: error: no such file or directory: 'ERROR-tried-to-rebuild-during-make-install'
However, now it will just fail with the 'cc: not found' error.
Inspection of the compile line will show
'ERROR-tried-to-rebuild-during-make-install'; It's not useful to
set CC to anything other than 'cc' during install as it is more
helpful to see the attempted compile rather than some other bogus
error.
- This now avoids running bsd.compiler.mk (cc executions) even more
during installworld. There are compiler-dependent SUBDIR in the
tree which required having a compiler during install.
There is at least 1 case where CC is still executed in the install,
such as from a LOOKUP!= in secure/lib/libcrypto/Makefile.inc checking
for 'vzeroall' support. This is not significant for installworld
as the lookup has a fallback (and hides its error) and only modifies CFLAGS,
thus it's not worth fixing.
PR: 212877
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
As of r316629 FreeBSD/arm64 uses the in-tree LLD linker by default, and
does not require an external an aarch64-binutils port or package.
Sponsored by: The FreeBSD Foundation
Hardfloat is now default (use riscv64sf as TARGET_ARCH
for softfloat).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8529
Summary:
The Freescale e500v2 PowerPC core does not use a standard FPU.
Instead, it uses a Signal Processing Engine (SPE)--a DSP-style vector processor
unit, which doubles as a FPU. The PowerPC SPE ABI is incompatible with the
stock powerpc ABI, so a new MACHINE_ARCH was created to deal with this.
Additionaly, the SPE opcodes overlap with Altivec, so these are mutually
exclusive. Taking advantage of this fact, a new file, powerpc/booke/spe.c, was
created with the same function set as in powerpc/powerpc/altivec.c, so it
becomes effectively a drop-in replacement. setjmp/longjmp were modified to save
the upper 32-bits of the now-64-bit GPRs (upper 32-bits are only accessible by
the SPE).
Note: This does _not_ support the SPE in the e500v1, as the e500v1 SPE does not
support double-precision floating point.
Also, without a new MACHINE_ARCH it would be impossible to provide binary
packages which utilize the SPE.
Additionally, no work has been done to support ports, work is needed for this.
This also means no newer gcc can yet be used. However, gcc's powerpc support
has been refactored which would make adding a powerpcspe-freebsd target very
easy.
Test Plan:
This was lightly tested on a RouterBoard RB800 and an AmigaOne A1222
(P1022-based) board, compiled against the new ABI. Base system utilities
(/bin/sh, /bin/ls, etc) still function appropriately, the system is able to boot
multiuser.
Reviewed By: bdrewery, imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D5683
1. Always calculate what the expected values are.
2. Add 'make test-system-compiler' to show all of the computed values
vs the wanted values.
3. Extend the .info line to buildkernel/kernel-toolchain/toolchain/_cross-tools.
4. Consolidate all of the logic to one condition.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
This also adds missing s/aarch64/arm64 to the sys.mk version and also
adds back armv6hf for universe since it was added to the sys.mk version
in r300438.
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7159
installkernel is technically META_MODE safe but doesn't need an explicit
approval to use it since it's all disabled via .PHONY.
world uses 'make -B installworld' which already will disable META_MODE
via the -B (.MAKE.MODE=compat) usage.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
This was a flaw in my change in r287903 but also in the original change
in r282156 since it used empty(${TARGETS}) rather than empty(TARGETS).
Reported by: lidl
Approved by: re (gjb)
Sponsored by: EMC / Isilon Storage Division
This broke in r301887 with the meta mode whitelist. 'make showconfig'
still needs WITH_META_MODE support.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
This was broken in r301888.
fmake does not look in share/mk by default and thus does not yet
have MK_META_MODE set with default.
Pointyhat to: bdrewery
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
- Move the sys.mk filemon requirement to bsd.init.mk as a warning.
This is intended only to show when building directly in a subdirectory
without filemon loaded.
- Move the error into Makefile and only apply it when building
from the META_TGT_WHITELIST target list.
-DNO_FILEMON can be used to suppress both the warning and the error but
makes WITH_META_MODE less useful. It will only compare build commands
in this mode rather than track all dependencies.
This fixes installing from a jail which doesn't need filemon in this
phase [1].
Reported by: Nikolai Lifanov <lifanov@mail.lifanov.com> [1]
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
META_TGT_WHITELIST is added to define which build targets are safe for
meta mode. See comments for more details.
This fixes 'make delete-old-libs' to properly show the interactive
prompt.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
META_MODE may create cookies during staging of files to WORLDTMP that would
also prevent installation of the files to the final DESTDIR, since the cookie
already exists. This is not yet the case but will be soon. Prevent other
similar issues by disabling META_MODE for any top-level install targets.
Sponsored by: EMC / Isilon Storage Division
for the armv6 ABI switch. This also make WITH_LIBSOFT functional on
the arm platform. As a transition thing, this seems to work even
without switching the ABI (we basically build the same libraries
twice when MK_LIBSOFT=yes until the ABI cut over next
month). MK_LIBSOFT remains default no.
The inclusion of .MAKE.DEPENDFILE (.depend) has special logic in make
to ignore stale/missing dependencies. bmake 20160220 added a '.dinclude'
directive that uses the special logic for .depend when including the file.
This fixes a build error when a file is moved or deleted that exists in a
.depend.OBJ file. This happened in r292782 when sha512c.c "moved" and an
incremental build of lib/libmd would fail with:
make: don't know how to make /usr/src/lib/libcrypt/../libmd/sha512c.c. Stop
Now this will just be seen as a stale dependency and cause a rebuild:
make: /usr/obj/usr/src/lib/libmd/.depend.sha512c.o, 13: ignoring stale .depend for /usr/src/lib/libcrypt/../libmd/sha512c.c
--- sha512c.o ---
...
This rebuild will only be done once since the .depend.sha512c.o will
be updated on the build with the -MF flags.
This also removes -MP being passed for the .depend.OBJ generation (which
would create fake targets for system headers) since the logic is no
longer needed to protect from missing files.
Sponsored by: EMC / Isilon Storage Division
architectures we do not provide upstream pkg(8) packages.
This is not tied to anything as-is, and likely will break
your system if used (based on experience with testing with
powerpc).
There is an overwhelming amount of evil happening here,
so until the issues are fixed, it will not be tied into the
'packages' target.
Sponsored by: The FreeBSD Foundation
