This removes the direct WME info access in the ieee80211com struct and instead
provides a method of fetching the data. Right now it's a no-op but eventually
it'll turn into a per-VAP method for drivers that support it (eg iwn, iwm,
upcoming ath10k work) as things like p2p support require this kind of behaviour.
Tested:
* ath(4), STA and AP mode
TODO:
* yes, this is slightly stack size-y, but it is an important first step
to get drivers migrated over to a sensible WME API. A lot of per-phy things
need to be converted to per-VAP before P2P, 11ac firmware, etc stuff shows up.
* While there clean up alignments and line wrapping in existing
definitions for rs API in if_iwmreg.h
Obtained from: dragonflybsd.git 085e37a042bdb17081e495e46919359ce43aa118
* iwm_xmit_queue_drain() calls ieee80211_free_node(), removing a possible
memory leak, compared to using just mbufq_drain().
* Remove duplicate mbufq_drain() from iwm_mvm_rm_sta(), this should be
handled in the caller.
Obtained from: dragonflybsd.git 339d45fda40072e0aca5ece639173204716f11fe
* Limiting the channel list with "ifconfig wlan0 chanlist ..." now will
actually set the list of channels scanned by iwm.
Tested:
* Intel 7260, STA mode, setting chanlist to 1-14 and 36-254, and indeed it does what
it should!
It turns out the /next/ dragonflybsd git actually uses the scan channel list,
so just kick this along to make the next commit easier.
Obtained from: dragonflybsd.git 53a009d6f66108b40d622ed90ea95eba5c0e5432
From the original commit:
==
* Actually look at the first channel in the list. If it's a 2.4GHz channel,
set IWM_PHY_BAND_24 flag. The IWM_PHY_BAND_5 flag is 0 anyway, so we
don't need to look further.
* While there factor out the iwm_mvm_rrm_scan_needed() tlv capability check.
Taken-From: Linux iwlwifi
==
However, this only really does the latter. The sc_ic channel list isn't the
scan channel list, it's the /whole list/ for the set of active channels,
so I don't know what the right thing to do is here.
So I'll commit this as an intermediary commit and we'll have to revisit whether
to finish the refactor as-is.
Tested:
* Intel 7260, STA mode
Obtained from: dragonflybsd.git 53a009d6f66108b40d622ed90ea95eba5c0e5432
* Firmware versions 21 and 22 generate some IWM_DEBUG_LOG_MSG notifications,
which seem to be harmless. Avoid spamming the system log with
"frame ... UNHANDLED (this should not happen)" messages.
Obtained from: dragonflybsd.git dda889ac57d8e5b46bb1b1ecf53c17a18481c7c8
* If device family is 8000 then iwm_pcie_load_cpu_sections()
won't be called at all (iwm_pcie_load_cpu_sections_8000() is
called in that case) so this piece of code never gets called.
Obtained from: dragonflybsd.git 3e9aaef308100a4d630feffc131e3aca2ae12f8a
* LAR can be disabled with the hw.iwm.lar.disable tunable now.
* On Family 8000 devices we need to check the lar_enabled flag from
nvm_data in addition to the TLV_CAPA_LAR_SUPPORT flag from the firmware.
* Add a separate IWM_DEBUG_LAR debugging flag.
Obtained from: dragonflybsd.git 0593e39cb295aa996ecf789ed4990c3b255f1770
* This change also fixes a possible issue in the existing smart-fifo code,
which set the IWM_SF_CFG_DUMMY_NOTIF_OFF bit on AC8260 chipsets, although
that's only used in iwlwifi for Family 8000 chipsets connected via SDIO
interface.
Obtained from: Dragonflybsd.git cb650b01526b0aeef3c4307d926e7f1428997d50
* This fixes cases where the group id of wide commands got lost, e.g. this
happened to the IWM_SCAN_ABORT_UMAC command.
Obtained from: dragonflybsd.git 71310fab0caca79bb5da43d9d642e77a4c27eea2
* Since a RUN -> INIT/SCAN transition seems to immediately destroy the
ieee80211_node for the AP, we can't read the in_assoc value from there.
Instead just directly pass that information via a boolean_t argument.
* Adds iwm_mvm_rm_sta_id() function, which just unconditionally removes
the station from the firmware.
* The iwm_mvm_rm_sta() function shouldn't actually remove the station from
firmware when we are still associated (i.e. during a RUN -> INIT/SCAN
transition).
* So when disassociating we will first call iwm_mvm_rm_sta() to drain the
queues/fifos. Later during disassociation we will then use
iwm_mvm_rm_sta_id() to actually remove the station.
Inspired-By: Linux iwlwifi
Obtained from: dragonflybsd.git 81b3c1fe9122fa22f33d97103039cc375f656231
* Add a per-vap ps_disabled flag, and use it for a workaround which fixes
an association issue when powersaving is enabled.
* Compute flag that should correpsond to the mvmif->bss_conf.ps flag in
Linux's iwlwifi (e.g. this disallows powersaving when not associated
yet).
Inspired-By: Linux iwlwifi
Obtained from: dragonflybsd.git dc2e69bdfe8c9d7049c8a28da0adffbfbc6de5c0
* Power management handling is per-vap, not per-node, so we should pass
the iwm_vap in these arguments.
Obtained from: dragonflybsd.git 62a4e7957a736b4de38938b02fa7eb9b45bc5d0d
* Otherwise we would never update powersaving settings until we complete
an association, after the first authentication attempt.
* This corresponds to what Linux iwlwifi seems to do.
Obtained from: dragonflybsd.git aa128dc02a17c2e616232ef0fa997121e969c995
* Tear down the relevant firmware state (i.e. the station, the vif binding)
in these transition cases.
* Before this case would leave the firmware state lying around, resulting
in errors and firmware panics in the subsequent association attempts.
Obtained from: dragonflybsd.git 94b501399fde6368ae388a669c95b099a6e66e93
* This adds iwm_mvm_rm_sta(), which will be used to tear down firmware
state for better/cleaner iwm_newstate() handling.
* Makes iwm_enable_txq() and iwm_mvm_flush_tx_path() non-static, add
the declarations to if_iwm_util.h for now.
Obtained from: dragonflybsd.git 85d1c6190c4c3564b1a347f253e823aa95c202b2
* Hence no need to keep stuff in separate iwm_assoc() function, just
inline the stuff into iwm_newstate().
Obtained from: dragonflybsd.git e8f7d88e0d030f138f95ecdb7c1a729d9fb0d6ab
* Inspired by iwn(4) and Linux iwlwifi.
* Read wme parameters into a buffer within struct iwm_vap in
iwm_wme_update().
* If we aren't associated yet, the new settings will soon be sent
by iwm_mvm_mac_ctxt_changed() during association.
* If we are already associated, explicitly call iwm_mvm_mac_ctxt_changed()
from iwm_wme_update() to send the new settings to the firmware.
* Change iwm_mvm_ac_to_tx_fifo mapping, to fit the freebsd net80211
WME stream class numbering, instead of Linux's enum ieee80211_ac_numbers.
Obtained from: dragonflybsd.git b8bd6cd746d1f45e616ccfcbeed06dfe452a1108
* Factor out iwm_handle_rxb() function from iwm_notif_intr().
* Removing the IWM_FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK flag allows
the device to put multiple frames (both command responses and 80211
frames) into a single RX buffer.
* Uses m_copym() to split up the receive buffers when multiple 80211
frames are received in one RX buffer. The effect is basically the same
as when using m_split(), but we want to keep the original mbuf around
when calling iwm_mvm_rx_rx_mpdu() to make error handling a bit easier
for now.
* Contains a small optimization to avoid the m_copym() when only a single
80211 frame is received in one RX buffer (i.e. matching the existing
behaviour).
Obtained from: dragonflybsd.git b5eb43f0280bbcfd26af51cf5a4b8e8ff3590b67
* Fixes oversight from commit 757eecf0e6c92745aa2eee95811e573c8300850e.
fw_has_api now uses the isset macro instead of a simple logical-and.
Obtained from: dragonflybsd.git c00575de8491dc402abf52c8c7e1cca1ef79e257
* Store macid and color values in struct iwm_vap, to avoid hardcoded
constants a bit.
* Add iwm_mvm_binding_remove_vif() function (will be used in disconnecting
from an access point without resetting the whole device).
* Not adding code from Linux iwlwifi yet, to handle one PHY context to
be bound to several VAPs/virtual-interfaces, it's definitely not needed
in the near future.
Obtained from: dragonflybsd.git f16ef74977e51e1bfc7a625dd18b98b02158e0e5
This might improve throughput slightly when far from the accesspoint,
apparently by allowing the firmware to listen on either of the two
antennas (if there are two, i.e. on 7260/7265/8260), whichever has
a better reception.
Obtained from: dragonflybsd.git 3b7fc5aac51f81062da0a2c8fdac23e683fbd548
* The DEVICE_POWER_FLAGS_CAM_MSK flag was removed in the upstream iwlwifi
in Linux commit ceef91c89480dd18bb3ac51e91280a233d0ca41f.
* Add sc_ps_disabled flag to struct iwm_softc, which corresponds to
mvm->ps_disabled in struct iwl_mvm in Linux iwlwifi.
* Adds a hw.iwm.power_scheme tunable which corresponds to the power_scheme
module parameter in Linux iwlwifi. Set this to 1 for completely
disabling power management, 2 (default) for balanced powermanagement,
and 3 for lowerpower mode (which does dtim period skipping).
* Imports the constants.h file from iwlwifi as if_iwm_constants.h.
* This doesn't allow changing the powermanagement setting while connected,
also one can only choose between enabled and disabled powersaving with
ifconfig (so switching between balanced and low-power mode requires
rebooting to change the tunable).
* After any changes to powermanagement (i.e. "ifconfig wlan0 powersave" to
enable powermanagement, or "ifconfig wlan0 -powersave" for disabling
powermanagement), one has to disconnect and reconnect to the accespoint
for the change to take effect.
Obtained from: dragonflybsd.git d7002a7990d077c92585978ea998474af50f91e0
* Fix a couple of cases where the nic lock ended up not being grabbed
during an iwm_read_prph() or iwm_write_prph().
Obtained from: dragonflybsd.git 6c5470f2db219c61e362c981fea969d97e1b8293
This can significantly reduce scan duration thus saving time and power.
EBS failure reported by FW disables EBS for current connection. It is
re-enabled upon new connection attempt on any WLAN interface.
Obtained from: dragonflybsd.git 89f579e9823a5c446ca172cf82bbc210d6a054a4
