Enable build of IPMI over OPAL on powerpc64le
Reviewed by: bdragon
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D27443
- Suppress -Wredundant-decls. Ultimately this warning is harmless in
any case, and it does not look like there is a simple way to avoid
redundant declarations in this case without a lot of header pollution
(e.g. having openzfs's shim param.h pulling in sys/kernel.h for hz).
- Suppress -Wnested-externs, which is useless anyway.
Unfortunately it was not sufficient just to modify OPENZFS_CFLAGS,
because the warning suppressions need to appear on the command line
after they are explicitly enabled by CWARNFLAGS from sys/conf/kern.mk,
but OPENZFS_CFLAGS get added before due to use of -I for the shims.
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27685
These drivers should have been removed along with tl(4) as part of
7c897ca91f and r347918 respectively
as these fromer made sure to only ever attach to the latter, e. g.:
<...>
static int
tlphy_probe(device_t dev)
{
if (!mii_dev_mac_match(dev, "tl"))
return (ENXIO);
<...>
r368193 was suppsed to rename the MOF firmware image, but the
qat_c2xxxfw makefile defined the two images in the wrong order so the
MMP image was renamed instead.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
Don't tell it to look for headers in a non-existent directory.
Reviewed by: imp, mmacy
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27565
The hme (Happy Meal Ethernet) driver was the onboard NIC in most
supported sparc64 platforms. A few PCI NICs do exist, but we have seen
no evidence of use on non-sparc systems.
Reviewed by: imp, emaste, bcr
Sponsored by: DARPA
Macfilter to route packets through different hooks based on sender MAC address.
Based on ng_macfilter written by Pekka Nikander
Sponsered by Retina b.v.
Reviewed by: afedorov
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27268
In r367395 parts of machine dependent linux_dummy.c were moved to a new
machine independent file sys/compat/linux/linux_dummy.c and the existing
linux_dummy.c was renamed to linux_dummy_machdep.c.
Add linux_dummy_machdep.c to the linux module for i386.
Rename sys/amd64/linux32/linux_dummy.c for consistency.
Add the new linux_dummy.c to the linux module for i386.
Enable in-kernel acceleration of SHA1 and SHA2 operations on arm64 by adding
support for the ossl(4) crypto driver. This uses OpenSSL's assembly routines
under the hood, which will detect and use SHA intrinsics if they are
supported by the CPU.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27390
Make room for adding arm64 support to this driver by moving the
x86-specific feature parsing to a separate file.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27388
If firmware_get() fails to find a loaded firmware image, it searches for
candidate KLDs to load. It will search for a KLD containing a module
with the same name as the requested image, and failing that, will load a
KLD with the same basename as the requested image.
The module name given by fw_stub.awk is simply "<mangled KLD name>_fw".
QAT firmware modules contain two images, neither of which match either
of the names used during lookup, so automatic loading of firmware images
after mountroot does not work. Work around this by using the same
string for the first image name and for the KLD basename.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
This driver provides support for Realtek PCI SD card readers. It attaches
mmc(4) bus on card insertion and detaches it on card removal. It has been
tested with RTS5209, RTS5227, RTS5229, RTS522A, RTS525A and RTL8411B. It
should also work with RTS5249, RTL8402 and RTL8411.
PR: 204521
Submitted by: Henri Hennebert (hlh at restart dot be)
Reviewed by: imp, jkim
Differential Revision: https://reviews.freebsd.org/D26435
This removes 288KB (36%) of the driver code and zillions of hacks and
workarounds, making single driver uniformly support several different
generations of hardware interfaces, not counting minor card variations.
After years of the hopeless fight, I don't think it worth to continue
support for hardware obsolete for 15-20 years. Instead much cleaner
now code should allow to move forward toward better locking, multiple
queues and other cool features.
All the remaining Qlogic cards starting from 4Gb 24xx to 32Gb 27xx use
the same hardware/firmware interface with minor incremental improvements,
so it seems to be a good new starting point. Except one PCI-X model all
all of them are PCIe and so still usable in modern systems.
Discussed with: ken, scottl, jpaetzel, imp
Relnotes: yes
Refering to guide: https://wiki.freebsd.org/SPDX the SPDX tag should not
replace the standard license text, however it should be added over the
standard license text to make the automation easier.
Because of that, the old license was kept, but the SPDX tag was added
on top of every ENA driver file.
Submited by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27117
It includes:
ACPI_HANDLE() implementation.
AC and VIDEO ACPI events notification support.
Replacement of hand-rolled GPLed _DSM method evaluation helpers
with in-base ones.
Submitted by: wulf
Differential Revision: https://reviews.freebsd.org/D26603
This fixes a potential crash in firmware 1.25.0.0 on the passive open
side during TOE operation.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
This change adds support for POWER8 and POWER9 PMCs (bare metal and
pseries).
All PowerISA 2.07B non-random events are supported.
Implementation was based on that of PPC970.
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26110
This provides an OpenCrypto driver for Intel QuickAssist devices. The
driver was initially ported from NetBSD and comes with a few
improvements:
- support for GMAC/AES-GCM, AES-CTR and AES-XTS, and support for
SHA/HMAC-authenticated encryption
- support for detaching the driver
- various bug fixes
- DH895X support
Discussed with: jhb
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D26963
Currently, this supports SHA1 and SHA2-{224,256,384,512} both as plain
hashes and in HMAC mode on both amd64 and i386. It uses the SHA
intrinsics when present similar to aesni(4), but uses SSE/AVX
instructions when they are not.
Note that some files from OpenSSL that normally wrap the assembly
routines have been adapted to export methods usable by 'struct
auth_xform' as is used by existing software crypto routines.
Reviewed by: gallatin, jkim, delphij, gnn
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26821
pvscsi and vmxnet3 build and work. Exclude vmci for now as it contains
x86-specific assembly.
Reported by: Vincent Milum Jr
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
- fix panic due to tqid overflow
- Improve libzfs_error_init messages
- Expose zfetch_max_idistance tunable
- Make dbufstat work on FreeBSD
- Fix EIO after resuming receive of new dataset over an existing one
Compiling it with LLVM 10 triggers https://bugs.llvm.org/show_bug.cgi?id=44351
While LLVM 11 is the default compiler, I regularly build with
CROSS_TOOLCHAIN=llvm10 or use system packages for clang on Linux/macOS and
those have not been updated to 11 yet.
This patch has the driver for 10Gigabit Ethernet controller in AMD
SoC. This driver is written compatible to the Iflib framework. The
existing driver is for the old version of hardware. The submitted
driver here is for the recent versions of the hardware where the Ethernet
controller is PCI-E based.
Submitted by: Rajesh Kumar <rajesh1.kumar@amd.com>
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25793
r366344 corrected the optimized amd64 skein assembly implementation, so
we can now enable it again.
Also add a dependency on this Makefile for the skein_block object, so
that it will be rebuit (similar to r366362).
PR: 248221
Sponsored by: The FreeBSD Foundation
dmi function are used to get smbios values.
The DRM subsystem and drivers use it to enabled (or not) quirks.
Reviewed by: hselasky
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26046
Driver for pwm-backlight compatible device.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26252
This is a simple subsystem that allow drivers to register as a backlight.
Each backlight creates a device node under /dev/backlight/backlightX and
an alias based on the name provided.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26250
