type. GEOM provider names can't duplicate (or shouldn't -- devfs will either
break or only use the first one if they do) so using the first provider
by that name is a sufficient check. This also lets the scripted partitioner
install onto gmirror and geli and such things.
statically. In most cases the number of table entries will be far less than
the maximum of 2048 allowed by the PCI specification.
Reuse macros from pcireg.h to interpret the MSI-X capability instead of rolling
our own.
Obtained from: NetApp
Scripts take the form:
------------------------------------
PARTITIONS=ada0
DISTRIBUTIONS="kernel.txz base.txz ports.txz"
#!/bin/sh
echo "sshd_enable=YES" >> /etc/rc.conf
pkg add puppet
echo "System setup complete"
------------------------------------
The second part of the script (beginning with #!) is run in the newly
installed system after the installation onto ada0 (with default partitioning,
see scriptedpart for more complicated scenarios) is complete.
will come soon. This lets the install process have a line like:
bsdinstall scriptedpart 'ada0 GPT {1.5G freebsd-ufs /, 10G freebsd-swap,
auto freebsd-ufs /usr}'
to set up a system with a 1.5GB /, some swap space, and a /usr using the
rest of ada0.
MFC after: 1 month
'bhyve' was developed by grehan@ and myself at NetApp (thanks!).
Special thanks to Peter Snyder, Joe Caradonna and Michael Dexter for their
support and encouragement.
Obtained from: NetApp
It stops treating the address on the interface as special by source
address selection rule even when the interface is outgoing interface.
This is desired in some situation.
Requested by: hrs
Reviewed by: IHANet folks including hrs
MFC after: 1 week
fill up to the uart's rx fifo size, and leave any remaining input
for when the rx fifo is read. This allows cut'n'paste of long lines
to be done into the bhyve console without truncation.
Also, introduce a mutex since the file input will run in the mevent
thread context and may corrupt state accessed by a vCPU thread.
Reviewed by: neel
Approved by: NetApp
With this change, dbench with >= 4 processes runs without getting
weird jumps forward in time when the APCI pmtimer is the default
timecounter.
Obtained from: NetApp
the guest to execute real or unpaged protected mode code - bhyve relies on
this feature to execute the AP bootstrap code.
Get rid of the hack that allowed bhyve to support SMP guests on processors
that do not have the "unrestricted guest" capability. This hack was entirely
FreeBSD-specific and would not work with any other guest OS.
Instead, limit the number of vcpus to 1 when executing on processors without
"unrestricted guest" capability.
Suggested by: grehan
Obtained from: NetApp
ensures that the next rotation happens at the correct time when using
interval-based rotations.
PR: bin/174438
Reviewed by: gad
Approved by: rstone (co-mentor)
MFC after: 1 week
credential cache files with names other than /tmp/krb5cc_<uid>.
The gssd daemon does not know how to find these credential caches.
This patch implements a new option "-s" that does a search for
credential cache files, using roughly the same algorithm as the
gssd daemon for Linux uses. The gssd behaviour is only changed
if the new "-s" option is specified. It also implements two other
new options related to the "-s" option.
Reported by: Piete.Brooks at cl.cam.ac.uk, Herbert Poeckl
Tested by: Herbert Poeckl (admin at ist.tugraz.at), Illias A. Marinos
MFC after: 2 weeks
status. '-n' is already used extensively elsewhere in pkgng (to mean
'dry-run') and this reduces the potential confusion
Submitted by: eadler
Approved by: bapt
MFC after: 2 weeks
towards replacing our mtree.
Sponsored by: DARPA, AFRL
Thanks to: cristos@NetBSD for reviewing and committing my patches
wiz@NetBSD for fixing typos in my patches
whether a system has been configured to use pkgng, cause /usr/sbin/pkg
recognise a -n option and exit with a failure code when the pkg port
is not installed.
Approved by: bapt
MFC after: 2 weeks
Since the 'busses[]' and 'apics[]' arrays are indexed by these 8-bit IDs
make sure that they have enough space to accomodate up to 256 entries.
Submitted by: Ravi Shamanna
Obtained from: NetApp
an error instead of calling err() when it is daemonized,
so that the error gets logged.
Discussed with: rwatson, jhb
Tested by: Illias A. Marinos, Herbert Poeckl
MFC after: 2 weeks
of average duration, and total busy time instead of %.
This looks more useful when one runs `iostat -Ix` periodically to
collect statistics: e.g. now it is possible to calculate busy %
between two runs subtracting total busy times and dividing per time
period.
Average duration and % busy are still available via `iostat -x`.
bhyve is intended to be a generic hypervisor, and not FreeBSD-specific.
(renaming internal routines will come later)
Reviewed by: neel
Obtained from: NetApp
being run to set BSDINSTALL_DISTSITE accordingly. This change allows
non-RELEASE branches to use the FTP snapshots directory for bootonly.iso
installations.
Approved by: simon
- Deembed scope id in L3 address in in6_lltable_dump().
- Simplify scope id recovery in rtsock routines.
- Remove embedded scope id handling in ndp(8) and route(8) completely.
auditdistd (distributed audit daemon) to the build:
- Manual cross references
- Makefile for auditdistd
- rc.d script, rc.conf entrie
- New group and user for auditdistd; associated aliases, etc.
The audit trail distribution daemon provides reliable,
cryptographically protected (and sandboxed) delivery of audit tails
from live clients to audit server hosts in order to both allow
centralised analysis, and improve resilience in the event of client
compromises: clients are not permitted to change trail contents
after submission.
Submitted by: pjd
Sponsored by: The FreeBSD Foundation (auditdistd)
On a nested page table fault the hypervisor will:
- fetch the instruction using the guest %rip and %cr3
- decode the instruction in 'struct vie'
- emulate the instruction in host kernel context for local apic accesses
- any other type of mmio access is punted up to user-space (e.g. ioapic)
The decoded instruction is passed as collateral to the user-space process
that is handling the PAGING exit.
The emulation code is fleshed out to include more addressing modes (e.g. SIB)
and more types of operands (e.g. imm8). The source code is unified into a
single file (vmm_instruction_emul.c) that is compiled into vmm.ko as well
as /usr/sbin/bhyve.
Reviewed by: grehan
Obtained from: NetApp
Rick Macklem and I discussed the default number of nfsd threads and
concluded that it is too low to perform adiquitely on today's hardware.
We decided to auto tune the number of nfsds based on the number of cpus
in the system.
While I'm here I've also added:
1) ability to set the minthreads/maxthreads from userland.
2) ability to run nfsd in debug mode via the cli.
Reviewed by: rmacklem
MFC after: 2 weeks
which was to self-initialize during the first function-call. This didn't work
so well because the first call was may or may-not be within a sub-shell
(which prevented proper setup of the pass-thru file descriptor, resulting in
dialogs that would not display).
Approved by: adrian (co-mentor) (implicit)
Use a more informative message
Fix some style(9) nits.
Bump version number
In pkg_add only warn users after the chroot is performed.
Submitted by: gavin, jilles
Reviewed by: beat, bapt
Approved by: cperciva
MFC after: 1 month
The -A option will create the minimal set of required ACPI tables in
guest memory. Since ACPI mandates an IOAPIC, the -I option must also
be used.
Template ASL files are created, and then passed to the iasl compiler
to generate AML files. These are then loaded into guest physical mem.
In support of this, the ACPI PM timer is implemented, in 32-bit mode.
Tested on 7.4/8.*/9.*/10-CURRENT.
Reviewed by: neel
Obtained from: NetApp
Discussed with: jhb (a long while back)
- Use 2001:db8:: as an example instead of deprecated 3ffe:: address block.
- Add check for connected routes.
- Add support of RTM_IFANNOUNCE for dyanmically-added/removed interfaces.
- Add support of *, ?, and [ in the interface list.
- Add -P number to specify route flag which will never expire.
- Add -Q number to specify route flag which route6d will add to routes via RIP.
- Add -p pidfile to specify the process ID file.
- Use queue(3) for linked-list.
- Use a consistent naming scheme for struct members.
- Use ANSI C style function declaration.
- Add check of RTM_VERSION mismatch.
There is no functional change.
userland via routing socket or sysctl. This eliminates the following
KAME-specific sin6_scope_id handling routine from each userland utility:
sin6.sin6_scope_id = ntohs(*(u_int16_t *)&sin6.sin6_addr.s6_addr[2]);
This behavior can be controlled by net.inet6.ip6.deembed_scopeid. This is
set to 1 by default (sin6_scope_id will be filled in the kernel).
Reviewed by: bz
stable/9/usr.sbin/sysinstall/help/shortcuts.hlp (reproduced below):
If /usr/sbin/sysinstall is linked to another filename, say
`/usr/local/bin/configPackages', then the basename will be used
as an implicit command name.
To get a list of modules you can link to, see `bsdconfig -h' output.
Approved by: adrian (co-mentor) (implicit)
use getopt instead of hacking on it more. This change also fixes the
method of silencing the compiler warning about gfn being used
uninitialized.
Approved by: cperciva
MFC after: 1 week
in the guest.
The variables are: smbios.bios.vendor=BHYVE and boot_serial=1
The FreeBSD guest uses the "smbios.bios.vendor" environment variable to
detect whether or not it is running as a guest inside a hypervisor.
The "boot_serial=1" is temporary and will be dropped when bhyve can do VGA
emulation.
Obtained from: NetApp
than waiting until AP bringup detects an out-of-range vCPU.
While here, fix all error output to use fprintf(stderr, ...
Reviewed by: neel
Reported by: @allanjude
Firmware tables require too much knowledge of system configuration,
and it's difficult to pass that information in general terms to a library.
The upcoming ACPI work exposed this - it will also livein bhyve.
Also, remove code specific to NetApp from the mptable name, and remove
the -n option from bhyve.
Reviewed by: neel
Obtained from: NetApp
problem with using a msgbox was one of truncation in the case of Xdialog(1)
and lack of screen real-estate (since the msgbox is not scrollable in X11
while a textbox is).
The textbox renders the text much better and is more appropriate for this
type of data display.
Approved by: adrian (co-mentor) (implicit)
requests, default to the previous 60-seconds scheduling method
unless there is any @every_second entries to conserve CPU cycles and
power.
This change also improves scheduling in the default mode by running
as close to the beginning of the minnute as possible by replacing
sleep(3) with nanosleep(2). Previously, the tasks would run anywhere
within the first second of the minute and that offset drifted back
and forth each time cron(8) was engaged.
MFC after: 1 month
Mark variables static where possible and place the uid/euid variables in
lp.h, so that we can compile-time enforce that these variables have the
same type.
current version of FreeBSD, this isn't guarenteed by the API. Custom
security modules, or future implementations of the setuid and setgid
may fail.
PR: bin/172289
PR: bin/172290
PR: bin/172291
Submittud by: Erik Cederstrand <erik@cederstrand.dk>
Discussed by: freebsd-security
Approved by: cperciva
MFC after: 1 week
