usbdi.h (1.60)
(and local changes compatibility changes to ufm.c and urio.c)
date: 2002/02/11 15:11:49; author: augustss;
Give usbd_do_request_flags() an extra argument for the timeout.
- Used mld_xxx and MLD_xxx instead of mld6_xxx and MLD6_xxx according
to the official defintions in rfc2292bis
(macro definitions for backward compatibility were provided)
- Changed the first member of mld_hdr{} from mld_hdr to mld_icmp6_hdr
to avoid name space conflict in C++
This change makes ports/net/pchar compilable again under -CURRENT.
Obtained from: KAME
This is temporary hack, better and generalized solution probably
should be implemented at lower layer(MII or PCI?).
Tested by: shoko.araki@soliton.co.jp
MFC after: 1 week
Don't try to create a vm object before the file system has a chance to finish
initializing it. This is incorrect for a number of reasons. Firstly, that
VOP requires a lock which the file system may not have initialized yet. Also,
open and others will create a vm object if it is necessary later.
it is a "magic" value, what it expands to is not really important.
I set it to "Cleared Kernel Dump", but that can be changed later
if someone thinks it's not good enough.
Pointy hat to: fenner
killed by SIGSYS for unimlemented syscalls is bad enough.
Obtained from: Lite2 branch
The Lite2 branch has some other interesting unmerged (?) bits in this
file. They are well hidden among cosmetic regressions.
sys/time.h rev.1.53, etc. Zero out the entire struct clkinfo and not
just the new spare part of it so that there is no possibility of leaking
kernel stack context to userland.
the case of VM86 calls from the kernel was broken, so this bug was not
a security hole.
PR: 36710
Submitted by: David Xu <davidx@viasoft.com.cn> (version for RELENG_4)
MFC after: 3 days
call read() to get the next command, and scread() disables the
screensaver. We don't want this behaviour in the sc_saver_keybonly
case.
Submitted by: Olivier Houchard <doginou@ci0.org>
mii_tick() which should only be called once per second.
Our current MII/PHY state-engine is not able to deal with PHY
interrupts as far as I can tell, and most net drivers don't seem
to use the link/status change call-back mechanism. It seems that
MII/PHY was orphaned before it grew up.
pmap_ensure_rid(). This can happen because the function is
called for both user and kernel addresses, while the rid array
only has room for user addresses. This bug got exposed by rev
1.58 of ia64/ia64/pmap.c and rev 1.8 of ia64/include/pmap.h.
revision 1.94
date: 2001/12/30 20:26:59; author: augustss; state: Exp; lines: +5 -2
Make sure we don't have any pending softintrs when entering polling mode.
Thanks to Darrin for finding and fixing this problem when using USB
keyboards in DDB.
This leaves some vestiges of the old locking, including style
bugs in it. I've only noticed anachronisms in socketvar.h so far
(I've merged net* but not kern or all of sys). The patch also
has old fixes for style bugs in accf stuff and namespace pollution
in uma... The largest style bugs are line continued backslashes
in column 80 and (these are fixed), and starting the do-while
code for the new macros in column 40, which is quite unlike the
usual indentation (see sys/queue.h) and not even like the indentation
for the old macros (column 32) (this is not fixed).
Submitted by: bde
- Reorder fork1() to do malloc() and other blocking operations prior to
acquiring the needed process locks.
- The new process inherit's the credentials of curthread, not the
credentials of the old process.
- Document a really weird race that will come up with KSE allows multiple
kernel threads per process.
exit1() we don't have to release it until we acquire schd_lock to
call cpu_throw().
- Since we can switch at any time due to preemption or a lock release
prior to acquiring sched_lock, don't update switchtime and switchticks
until the very end of exit1() after we have acquired sched_lock.
- Interlock the proctree_lock and proc lock in wait1() and exit1() to
avoid lost wakeups when a parent blocks waiting for a child to exit at
the bottom of wait1(). In exit1() the proc lock interlocked with
proctree_lock (and released after acquiring sched_lock) is that of
the parent process.
- In wait1() use an exclusive lock of proctree lock while we are
looking for a process to harvest. This allows us to completely
remove all references to the process once we've found one (i.e.,
disconnect it from pgrp's, session's, zombproc list, and it's parent's
children list) "atomically" without needing to worry about a lock
upgrade.
- We don't need sched_lock to test if p_stat is SZOMB or SSTOP when holding
the proc lock since the proc lock is always held with p_stat is set to
SZOMB or SSTOP.
- Protect nprocs with an xlock of the allproc_lock.
locks the process.
- Defer other blocking operations such as vrele()'s until after we
release locks.
- execsigs() now requires the proc lock to be held when it is called
rather than locking the process internally.
Atm_connection items.
- Replaced the Atm_connvc storage pool with an uma_zone of Atm_connvc
items.
- Created void atm_cm_init(void *) and added it to the netatm init code.
I'm thinking that there will definetly be more ``subsystem'' init
functions to be added so I'll probably change these calls to be a for
loop through init routines (or something).
mallochash. Mallochash is going to go away as soon as I introduce the
kfree/kmalloc api and partially overhaul the malloc wrapper. This can't happen
until all users of the malloc api that expect memory to be aligned on the size
of the allocation are fixed.
Implement the following checks on freed memory in the bucket path:
- Slab membership
- Alignment
- Duplicate free
This previously was only done if we skipped the buckets. This code will slow
down INVARIANTS a bit, but it is smp safe. The checks were moved out of the
normal path and into hooks supplied in uma_dbg.
is not set in the scsi completion status, or if the residual is clearly
nonsense, then this was a command that suffered the loss of one or more
FC frames in the middle of the exchange.
Set HBA_BOTCH and hope it will get retried. It's the only thing we can do.
MFC after: 1 day
Turn the sigio sx into a mutex.
Sigio lock is really only needed to protect interrupts from dereferencing
the sigio pointer in an object when the sigio itself is being destroyed.
In order to do this in the most unintrusive manner change pgsigio's
sigio * argument into a **, that way we can lock internally to the
function.
we don't collect any stats in it, we mii_tick() in it! This fix the bug
when autonegotiating fullduplex modes.
Also, pause activity before setting TXCON in epic_miibus_statchg(). Though
i've never seen problmes from not doing that, the documentation says we
need to do it.
MFC after: 1 week
well as is, so - just fetch current status upon MII_TICK.
Also do IFM_INST verification at the top of *_service() then doing it
separately for every case in switch.
acphy: do not read MII_ACPHY_DIAG twice, there is nothing latching.
qsphy: always fetch actual link status from MII_QSPHY_PCTL.
MFC after: 1 week
more on how ipfw(8) deals with tiny fragments. While we're at it, add
a quick log message to even let people know we dropped a packet. (Note
that the second FINE POINT is somewhat redundant given the first, but
since the code is there, leave the docs for it.)
MFC after: 1 day
loading breakage'). The patch fixes serious issues with the VFS
operations vector array which results in a crash when a filesystem module
adding a new VOP is loaded into the kernel. Basically what was happening
before was that the old operations vector was being freed and a new one
allocated. The original MALLOC code tended to reuse the same address
for the case and so the bug did not rear its ugly head until the new memory
subsystem was emplaced.
This patch replaces the temporary workaround Dave O'Brien comitted in 1.58.
The patch is clean enough that I intend to MFC it to stable at some point.
Submitted by: Alexander Kabaev <ak03@gte.com>
MFC after: 1 week
0xdeadc0de and then check for it just before memory is handed off as part
of a new request. This will catch any post free/pre alloc modification of
memory, as well as introduce errors for anything that tries to dereference
it as a pointer.
This code takes the form of special init, fini, ctor and dtor routines that
are specificly used by malloc. It is in a seperate file because additional
debugging aids will want to live here as well.
only for exceptions.
While adding this to exception_save and exception_restore, it was hard
to find a good place to put the instructions. The code sequence was
sufficiently arbitrarily ordered that the density was low (roughly 67%).
No explicit bundling was used.
Thus, I rewrote the functions to optimize for density (close to 80% now),
and added explicit bundles and nop instructions. The immediate operand
on the nop instruction has been incremented with each instance, to make
debugging a bit easier when looking at recurring patterns. Redundant
stops have been removed as much as possible. Future optimizations can
focus more on performance. A well-placed lfetch can make all the
difference here!
Also, the FRAME_Fxx defines in frame.h were mostly bogus. FRAME_F10 to
FRAME_F15 were copied from FRAME_F9 and still had the same index. We
don't use them yet, so nothing was broken.
the block to read and copy out. This removes the hack in
udf_readatoffset() for only reading one block at a time. WooHoo!
Remove a redundant test for fragmented fids in both udf_readdir()
and udf_lookup(). Add comment to both as to why the test is
written the way it is. Add a few more safety checks for brelse().
Thanks to Timothy Shimmin <tes@boing.melbourne.sgi.com> for pointing
out these problems.
sent me a replacement patch that fixes the problem. The challenge
buffer was not large enough by a factor of 4 (due to my changing the
size from 128 to 32, but not u_int8_t to u_int32_t).
MFC after: 1 day
Submitted by: skibo@pacbell.net
Requested by: bde
Since locking sigio_lock is usually followed by calling pgsigio(),
move the declaration of sigio_lock and the definitions of SIGIO_*() to
sys/signalvar.h.
While I am here, sort include files alphabetically, where possible.
mutex class. Currently this is only used for kmapentzone because kmapents
are are potentially allocated when freeing memory. This is not dangerous
though because no other allocations will be done while holding the
kmapentzone lock.
is limiting it to, not what the device says it can handle.
- cl_status is an integer. cl_lstatus is a pointer.
- Add some debugging code to dump some things the driver knows about
the adapter.
- Tell CAM that the adapter can handle more commands when a command
completes. This fixes the problem were the SIM would freeze once
the driver hit the maximum number of transactions for the device.
- Change the vendor string to COMPAQ.
- Turn of Synchronize Cache for now. It locks the controller up.
Approved by: msmith
Obtained from: Yahoo!
malloc profiling) also modified the set of pre-defined buckets for the
memory allocator. For reasons unknown to me, this resulted in extensive
memory corruption in the kernel, in particular on SMP boxes, so I'm
committing this work-around until Jeff gets a chance to debug it
properly. David Wolfskill pointed me at this commit as the one that
might be a problem; I've been running this code on two dual-processor
burn-in boxes for about 12 hours now, and the rate of panics due to
memory corruption has dropped to zero (from one every five minutes).
Hopefully not treading on the toes of: jeff
Rename mii_phy_auto_stop() mii_phy_down().
Introduce mii_down(), use it from nge. Do not indirect it to 19 identical
case's in 19 switchstatements like NetBSD did.
Highlights include:
- New low-level trap code from NetBSD. The high level code still needs a lot
of work.
- Fixes for some pmap handling in thread switching.
- The kernel will now get to attempting to jump into init in user mode. There
are some pmap/trap issues which prevent it from actually getting there though.
Obtained from: NetBSD (parts)
i386/ia64/alpha - catch up to sparc64/ppc:
- replace pmap_kernel() with refs to kernel_pmap
- change kernel_pmap pointer to (&kernel_pmap_store)
(this is a speedup since ld can set these at compile/link time)
all platforms (as suggested by jake):
- gc unused pmap_reference
- gc unused pmap_destroy
- gc unused struct pmap.pm_count
(we never used pm_count - we track address space sharing at the vmspace)
SIGCHLD handler is SIG_IGN. This is a reimplementation of the
problematic revision 1.131 of kern_exit.c. To avoid accessing process
UPAGES, we set a new procsig flag when the SIGCHLD handler is SIG_IGN
and use that instead.
Otherwise we fall back to using the static hints the next time around.
We still have the leftover fallback code there which meant that we skipped
the use_hints checking on the second and subsequent calls. Also, be a bit
more careful about walking off the end of the envp array.
I've extracted this from a larger diff. I hope I didn't miss anything...
in the same style as sys/proc.h.
o Undo the de-inlining of several trivial, MPSAFE methods on the vm_map.
(Contrary to the commit message for vm_map.h revision 1.66 and vm_map.c
revision 1.206, de-inlining these methods increased the kernel's size.)
breakage when I tried to merge OpenBSD wi_hostap changes into the
tree. Skibo found the problem and submitted these patches. Thanks!
Submitted by: skibo@pacbell.net
of a socket. This avoids lock order reversal caused by locking a
process in pgsigio().
sowakeup() and the callers of it (sowwakeup, soisconnected, etc.) now
require sigio_lock to be locked. Provide sowwakeup_locked(),
soisconnected_locked(), and so on in case where we have to modify a
socket and wake up a process atomically.
ever connect a SCSI Cdrom/Tape/Jukebox/Scanner/Printer/kitty-litter-scooper
to your high-end RAID controller. The interface to the arrays is still
via the block interface; this merely provides a way to circumvent the
RAID functionality and access the SCSI buses directly. Note that for
somewhat obvious reasons, hard drives are not exposed to the da driver
through this interface, though you can still talk to them via the pass
driver. Be the first on your block to low-level format unsuspecting
drives that are part of an array!
To enable this, add the 'aacp' device to your kernel config.
MFC after: 3 days
by other bits of code, split struct timecounter into two.
struct timecounter contains just the bits which pertains to the hardware
counter and the reading of it.
struct timehands (as in "the hands on a clock") contains all the ugly bit
fidling stuff. Statically compile ten timehands.
This commit is the functional part. A later cosmetic patch will rename
various variables and fieldnames.
loader variable, which let users specify the root mount point
the exact way one does after booting the kernel.
Let's take this opportunity to document it...
collected at boot and made available through sysctl(8). At the
moment, the following MIB names are created:
hw.mca.count - The number of error records collected.
hw.mca.first - The lowest sequence number present.
hw.mca.last - The highest sequence number present.
hw.mca.<X> - The error record with sequence number <X>.
Using sysctl(8) allows us to easily detect and analyze the records,
which is very helpful during development of MCA but can also be used
in production as a way to collect machine health statistics.
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
timeout loop.
Limit the rate at which we wind the timecounters to approx 1000 Hz.
This limits the precision of the get{bin,nano,micro}[up]time(9)
functions to roughly a millisecond.
timecounter will be used starting at the next second, which is
good enough for sysctl purposes. If better adjustment is needed
the NTP PLL should be used.
around. If the kernel boots successfully, the record of this kernel
is erased, it is intended to be a one-shot option for testing
kernels.
This could be improved by having the loader remove the record of
the next kernel to boot, it is currently removed in /etc/rc immediately
after disks are mounted r/w.
I'd like to MFC this before the 4.6 freeze unless there is violent
objection.
Reviewed by: Several on IRC
MFC after: 4 days
1.43 (dfr 04-Apr-97): * [dfr] Kludge until I get around to fixing all the vfs locking.
1.43 (dfr 04-Apr-97): */
The new devfs doesn't support VFS locking. So don't do locking
assertions for devfs vnodes.
With this change, a kernel with options DEBUG_VFS_LOCKS actually
gets to single-user mode.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
LRU fashion when the listen queue fills up. Previously, there was
no mechanism to kick out old sockets, leading to an easy DoS of
daemons using accept filtering.
Reviewed by: alfred
MFC after: 3 days
- malformed environment strings (ones without an '=') were not rejected.
There shouldn't be any of these, but when the static environment is
empty it always begins with one of these; this one should be considered
as the terminator after the end of the environment, but it isn't.
- the comparison of the name being looked up with the name in the
environment was fuzzy -- only the characters up to the length of the
latter were compared, so _getenv_static("foobar") matched "foo=..."
in the environment and everything matched "" in the empty environment.
MFC after: 3 days
#!bin/sh
# Original version of this by Michael Reifenberger
# <root@nihil.plaut.de>.
mdconfig -d -u 11 >/dev/null 2>&1
dd if=/dev/zero of=zz bs=1m count=1
while :
do
mdconfig -a -t vnode -f zz -u 11
fdisk -f - -iv /dev/md11 <<EOF1
g c1 h64 s32
p 1 165 0 2048
a 1
EOF1
mdconfig -d -u 11
done
Garbage pointers in __si_u were not cleared by destroy_dev(). Not
clearing si_disk made the above fatal because the disk layer uses
si_disk as a flag to indicate that the dev_t has been completely
initialized. disk_destroy() clears si_disk for the parent dev_t
but doesn't get called for children.
Not fixed:
- setting the undocumented sysctl debug.free_devt should cause more
complete destruction of the dev_t including clearing of __si_u, but
actually causes the above to panic a little earlier.
- the loop leaks 10 memory allocations per iteration (4 DEVFS, 2 devbuf
and 4 dev_t).
Reviewed by: timeout by MAINTAINER after 3 months
the symbol index defined by the relocation. The elf_lookup() support
function is to be used by elf_reloc() when symbol lookups need to be
done. The elf_lookup() function operates on the symbol index and
will do a symbol name based lookup when such is required, otherwise
it uses the symbol index directly. This solves the problem seen on
ia64 where the symbol hash table does not contain local symbols and
a symbol name based lookup would fail for those symbols.
Don't pass the symbol name to elf_reloc(), as it isn't used any more.
calls associated with the pool and the objects allocated out from the
pool.
- Insert atm_attributes_zone which is a uma_zone that is used just as the
atm_attributes_pool was (including the max objects value). Also, used
the appropriate zalloc and zfree's where necesary.
ahc_eisa.c:
ahc_pci.c:
Conform to new aic7xxx IRQ API.
Adapt to aic7xxx_freebsd -> aic7xxx_osm changes.
aic7770.c:
Disable card generated interrupt early in our probe for
"extra safety"
Commonize some seeprom code with the PCI side of the driver.
aic7xxx.c:
Correctly initialize a few scratch ram locations during
a sequencer restart. This avoids spurious sequencer ram
parity errors in some configurations.
Include the softc in ahc_update_residual calls. We need it
for some diagnostics in this code path.
Flag a data overrun on an auto-request sense failure as a
CAM_AUTOSENSE_FAIL rather than a CAM_DATA_RUN_ERR.
Force a renegotiation after noticing a parity error. This
covers targets that lose our negotiation settings but don't
bother to give us a unit attention condition. This can happen
if a target fails during a reselection of us during a cable
pull.
Convert some code to using constants.
Fix some typos.
Correct target mode message loop handling. ahc_clear_msg_state
was not clearing the "need to go to message out phase" bit once
our loop was over.
Simplify some abort handling code.
Include tag information in target mode immediate notify events.
When shutting down EISA controllers, don't EISA BIOS settings in
the high portions of scratch ram. This fixes warm boot issues on
some systems.
Save a bit of space by only allocating the SCBs that we can use.
Avoid some code paths in ahc_abort_scbs() if we are currently
acting as a target.
Correctly cleanup stranded SCBs in the card's SCB array. These
are SCBs who's mapping has already been torn down by code that
aborted the SCB by seeing it in another list first.
Add a comment about some potential bus reset issues for target
mode on Twin (EISA only) controllers.
aic7xxx.h:
Cleanup the hardware scb definitions a bit.
Allocate a ful 256 byte scb mapping index. This simplifies
the lookup code since the table covers all possible (and potentially
bogus) values.
Make AHC_DEBUG work again.
aic7xxx.reg:
Updates to hardware SCB definition.
New definitions for target mode fixes.
aic7xxx.seq:
In target mode, initialize SAVED_LUN just after we receive
the identify message. It may be required in the error recovery
path when a normal cdb packet (includes lun) is not sent up to
the host for processing.
Respond to irregular messages during a selection in target mode.
Defer looking for space for a cdb packet until we are about to
enter command phase. We want to be able to handle irregular messages
even if we would otherwise return QUEUE_FULL or BUSY.
Add support for sending Ignore Wide Residue messages as a target.
In the disable disconnect case in target mode, set our transfer
rate correctly once data are availble.
aic7xxx_93cx6.c:
aic7xxx_93cx6.h:
Add the ability to write and erase the seeprom.
aic7xxx_inline.h:
Correct Big Endian handling of large cdb sizes (> 12 bytes).
Adaptec to changes in the calc_residual API.
Correct a target mode bug where we always attempted to service
the input queue even if no progress could be made due to lack
of ATIOs.
aic7xxx_osm.c:
Adaptec to new IRQ mapping API. The new API allows the core
to only enable our IRQ mapping once it is safe (sufficient
initialization) to do so.
Slap bootverbose protection around some diagnostics.
Only attempt DT phases if we are wide.
aic7xxx_osm.h:
Enable big endian support.
Adjust for IRQ API change.
aic7xxx_pci.c:
Be more careful about relying on subvendor 9005 information.
We now only trust it for HBAs. This should allow the driver
to attach to some MBs where the subvendor/device information
does not follow the Adaptec spec.
Only enable interrupts on the card once we are fully setup.
Disable external SCB ram usage on the aic7895. I have not
been able to make it 100% reliable.
Adjust to seeprom routines being properly prefixed with "ahc".
Fix a few bugs in the external SCB ram probing routine. We
need to clear any parity errors we've triggered during the
probe to avoid future, fatal, interrupts.
If we detect an invalid cable combination, pretent there are
no cable at all. This will enable all of the terminators
which is probably the safest configuration we can "guess".
MFC after: 4 days
2, but that's not the case. This fixes the case where there were slots
in the PIR table that had no bits set, but we assumed they did and used
strange results as a result.
o Map invalid INTLINE registers to 255 in pci_cfgreg.c. This should allow
us to remove the bogus checks in MI code for non-255 values.
I put these changes out for review a while ago, but no one responded
to them, so into current they go.
This should help us work better on machines that don't route
interrupts in the traditional way.
MFC After: 4286 millifortnights
to build kernel and kernel modules so stop supporting them in
bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk
as special versions of the install and reinstall targets, and
only define them if DEBUG is also defined (when debug versions
are really built).
Prompted by: bde
sections for various standards. Conditionalize sections for various
standards. Use standards conforming spelling for types in the
sockaddr_in structure.
