- Make sure the interface is UP and RUNNING in fddi_input().
- Reorder and comment packet tests in fddi_input().
- Call if_attach() in fddi_ifattach().
- Test for a valid return from ifaddr_byindex().
- Use struct fddi_header where appropriate.
- Use bcopy() rather than memcpy().
- Use FDDI_ADDR_LEN macro instead of ETHER_ADDR_LEN macro.
- Add loadable module support.
- Use FDDI_ADDR_LEN rather than a magic number or a sizeof().
- Hide distracting sizeof() behind FDDI_HDR_LEN macro.
- Don't use sizeof(struct llc) in areas where we mean LLC_SNAPFRAMELEN.
allows us to properly parse cards with attribute memory based CIS that
before wouldn't parse correctly, sometimes with a panic. This allows
me to get my 3C562 modem/ethernet card to fail to attach due to
problems in the ep and sio drivers rather than due to problems in the
CIS parsing code :-).
We weren't setting the address to jump to for the function entries.
This caused us to only work when the addional entries were after the
first ones. On the 3C562/3C563 card this was not the case.
We were also mapping Attribute memory when common memory was asked for
in the target of the LONGLINK_{A,C} or LONGLINK_MFC.
My IBM Home And Away Modem/LAN card still fails for reasons unknown.
I have not been able to find very much information about the PC98
extended partition layout so this is gleaned from the source in
our pc98 architecture. Corrections and patched very welcome.
Sponsored by: DARPA and NAI Labs.
in vfs_mount(), in particular revisions 1.215, 1.227 and 1.240.
- flag2 is a low quality variable name, change it to kern_flag.
- strncpy NUL-terminates f_fstypename and f_mntonname since the strings
have length <= <buffer length> - 1, so the explicit NUL-termination is
bogus.
- M_ZERO'ing space for fstype and fspath is stupid since we never use the
space beyond the end of the string.
- Do various style(9) cleanups in both functions.
Submitted by: bde
Reviewed by: phk
put a bunch of crap before the code in .text. Since the firmware
doesn't seem to honour the a.out entry point, we need to include
a little assmbler file which jumps to where we want to be in C.
Submitted by: jake
can be called both with and without the pipe mutex held. (For example,
if called by pipeselwakeup(), it is held. Whereas, if called by kqueue_scan(),
it is not.)
Reviewed by: alfred
There is still some locations where the PROC lock should be held
in order to prevent inconsistent views from outside (like the
proc->p_fd fix for kern/vfs_syscalls.c:checkdirs()) that can be
fixed later.
Submitted by: Jonathan Mini <mini@haikugeek.com>
This completes the ATA RAID support, since all functions to manipulate
the RAID are accessible from FreeBSD, the BIOS on the ATA RAID cards
are only nessesary for booting.
I decided to allow for creation of ATA RAID's on any ATA controller, but
please keep in mind the restrictions on that. Due to the BIOS not
knowing what to do you can only boot from a RAID1 or the first disk
in a SPAN, if its not located on a "real" ATA RAID controller like
the Promise or Highpoint controllers.
Sponsored by: Advanis
with this flag. Remove the dup_list and dup_ok code from subr_witness. Now
we just check for the flag instead of doing string compares.
Also, switch the process lock, process group lock, and uma per cpu locks over
to this interface. The original mechanism did not work well for uma because
per cpu lock names are unique to each zone.
Approved by: jhb
disablement assumptions in kern_fork.c by adding another API call,
cpu_critical_fork_exit(). Cleanup the td_savecrit field by moving it
from MI to MD. Temporarily move cpu_critical*() from <arch>/include/cpufunc.h
to <arch>/<arch>/critical.c (stage-2 will clean this up).
Implement interrupt deferral for i386 that allows interrupts to remain
enabled inside critical sections. This also fixes an IPI interlock bug,
and requires uses of icu_lock to be enclosed in a true interrupt disablement.
This is the stage-1 commit. Stage-2 will occur after stage-1 has stabilized,
and will move cpu_critical*() into its own header file(s) + other things.
This commit may break non-i386 architectures in trivial ways. This should
be temporary.
Reviewed by: core
Approved by: core
- return error -> return (error);
- move a declaration to the top of the function.
- become bug for bug compatible with if (error) lines.
Submitted by: bde
new vfs_getopt()/vfs_copyopt() API. This is intended to be used
later, when there will be filesystems implementing the VFS_NMOUNT
operation. The mount(2) system call will disappear when all
filesystems will be converted to the new API. Documentation will
be committed in a while.
Reviewed by: phk
modules (ie. procfs.ko).
When the kernel loads dynamic filesystem module, it looks for any of the
VOP operations specified by the new filesystem that have not been registered
already by the currently known filesystems. If any of such operations exist,
vfs_add_vnops function calls vfs_opv_recalc function, which rebuilds vop_t
vectors for each filesystem and sets all global pointers like ufs_vnops_p,
devfs_specop_p, etc to the new values and then frees the old pointers. This
behavior is bad because there might be already active vnodes whose v_op fields
will be left pointing to the random garbage, leading to inevitable crash soon.
Submitted by: Alexander Kabaev <ak03@gte.com>
kern_linker.c and rev. 1.237 of vfs_syscalls.c since these are not the
source of the recent panics occuring around kldloading file system
support modules.
Requested by: rwatson
The conclusion is that this method really can tell the perfect from the
less than perfect ACPI counters.
It is in fact probably a bit more discriminative than that, but we
will rather condemn some otherwise perfect counters to the slightly
slower "-safe" version, than certify a counter as perfect which
will let us down later.
Many thanks to all the people who sent email reports!
where a sysctl within 20 seconds of a cache_drain could yield negative "USED"
counts.
Also, grab the uma_mtx while in the sysctl handler. This hadn't caused
problems yet because Giant is held all the time.
Reported by: kkenn
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses. Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses. Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
- change the IOMMU support code so that it supports overcommittting the
available DVMA memory, while still allocating as lazily as possible.
This is achieved by limiting the preallocation, and deferring the
allocation to map load time when it fails. In the latter case, the
DVMA memory reserved for unloaded maps can be stolen to free up enough
memory for loading a map.
- allow NULL settings in the method tables, and search the parent tags
until an appropriate implementation is found. This allows to remove some
kluges in the old implementation.
the bus-dependent code and to be able to support more systems. The core
of the new code is mostly obtained from NetBSD.
Kluge the interrupt routing methods of the psycho and apb drivers so
that an intline of 0 can be handled for now; real routing is still not
possible (all intline registers are preinitialized instead); this will
require a sparc64-specific adaption of the driver for generic PCI-PCI
bridges with a custom routing method to work right.
by the hardware are still marked as owned. Handle this by installing a
timeout handler to collect this descriptor to avoid having received
packets remain unhandled until the next one arrives.
- remove some useless code from the status change handler that was intended
to enable the the MII drivers for external phys; this is already done
during interface initialization, and the deleted code made some
assumptions about phy addresses that do not seem to hold true on newer
cards. This should get at least one of the two hmes of newer Netra t1
machines working.
- correct the interrupt resource allocation
- bump the number of RX descriptors, lower values cause promblems on some
machines
and upgrade to using 10 byte cdbs.
As far as I tested, this works efficiently for most of the
SBP-II/Firewire devices but most of the umass devices still need
ad-hoc work around because umass-sim doesn't return any SCSI errors.
A sysctl nob is also added for the last resort.
I hope we don't need DA_Q_NO_6_BYTE quirks anymore.
Reviewed by: gibbs
MFC after: 1 week
# This appears to not break X11, but I'm having problems compiling the
# glide part of the server with or without this patch, so I can't tell
# for sure.
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses. Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses. Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses. Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses. Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
not removing tabs before "__P((", and not outdenting continuation lines
to preserve non-KNF lining up of code with parentheses. Switch to KNF
formatting and/or rewrap the whole prototype in some cases.
not blocked by raising the pil, a reciever may be interrupted while holding
a spinlock. If the sender does not defer interrupts throughout the entire
operation it may be interrupted and try to acquire a spinlock held by a
reciever, leading to a deadlock due to the synchronization used by the
ipi handlers themselves.
Submitted by: tmm
as a macro w/o messing things up. This is really an abuse and we will back
this out as soon as the abusers have been fixed. Add a comment to this
effect.
With this change, the XFree86-4 port now builds.
code that is still not safe. suser() reads p_ucred so it still needs
Giant for the time being. This should allow kern.giant.proc to be set
to 0 for the time being.
Move the network code from using cr_cansee() to check whether a
socket is visible to a requesting credential to using a new
function, cr_canseesocket(), which accepts a subject credential
and object socket. Implement cr_canseesocket() so that it does a
prison check, a uid check, and add a comment where shortly a MAC
hook will go. This will allow MAC policies to seperately
instrument the visibility of sockets from the visibility of
processes.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
pointer which will then result in the allocated route's reference
count never being decremented. Just flood ping the localhost and
watch refcnt of the 127.0.0.1 route with netstat(1).
Submitted by: jayanth
Back out ip_output.c,v 1.143 and ip_mroute.c,v 1.69 that allowed
ip_output() to be called with a NULL route pointer. The previous
paragraph shows why this was a bad idea in the first place.
MFC after: 0 days
to test req->td for NULL values and then do somewhat more bizarre things
relating to securelevel special-casing and suser checks. Remove the
testing and conditional security checks based on req->td!=NULL, and insert
a KASSERT that td != NULL. Callers to sysctl must always specify the
thread (be it kernel or otherwise) requesting the operation, or a
number of current sysctls will fail due to assumptions that the thread
exists.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
Discussed with: bde
NULL, turn warning printf's into panic's, since this call has been
restructured such that a NULL cred would result in a page fault anyway.
There appears to be one case where NULL is explicitly passed in in the
sysctl code, and this is believed to be in error, so will be modified.
Securelevels now always require a credential context so that per-jail
securelevels are properly implemented.
Obtained from: TrustedBSD Project
Sponsored by: NAI Labs
Discussed with: bde
3c996B-T, with the 5701 rev B5 ASIC). One thing that confuses me
still is that the 'link state change' bit in the status block seems
to change state an awful lot. I have a workaround for this in place
now, but it needs more investigation. For the moment though, this
is enough to get the driver to work with this card.
made aware in jail environments. Supposedly something is broken, so
this should be backed out until further investigation proves otherwise,
or a proper fix can be provided.
This increases the number of concurrent outgoing connections from ~4000
to ~16000. Other OSes (Solaris, OS X, NetBSD) and many other NAT
products have already made this change without ill effects, so we
should not run into any problems.
MFC after: 1 week
method-based inter-process security checks. To do this, introduce
a new cr_seeotheruids(u1, u2) function, which encapsulates the
"see_other_uids" logic. Call out to this policy following the
jail security check for all of {debug,sched,see,signal} inter-process
checks. This more consistently enforces the check, and makes the
check easy to modify. Eventually, it may be that this check should
become a MAC policy, loaded via a module.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
soon because it's just getting harder and harder to find switches
that correctly implement the GET ALL NEXT subcommands for the SNS
protocol.
Latch up result out pointer and set a busy flag when we're looking
at the response queue. This allows for a cleaner way to make sure
we don't get multiple CPUs trying to read the same response queue
entries.
Change how isp_handle_other_response returns values (clarity).
Make PORT UNAVAILABLE the same as PORT LOGOUT (force a LIP).
Do some formatting changes.
MFC after: 0 days
