Define EFISRC, EFIINC and EFIINCMD. Use them, as well as using other
symbols defined in defs.mk. Prefer <bsd.init.mk> to ../../Makefile.inc
or <src.opts.mk>.
Sponsored by: Netflix
It is possible that building headers requires an OBJDIR.
The other phases of xdev have their own 'make obj' calls
where needed, such as inside 'make libraries' itself.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Having objects in world32 and a sysroot in lib32 was confusing and
inconsistent with the normal build. Now objects are stored in
obj-lib32 (or obj-libsoft) and the sysroot (analagous to WORLDTMP)
is stored in obj-lib32/tmp.
Sponsored by: Dell EMC Isilon
Without this the user has to mess with 'make -f Makefile.inc1 ...' to figure
out where the files are installed in the OBJDIR and then they need to copy them
to where they really wanted them. Using DESTDIR may be problematic after
r325001 as well.
The files will be installed to DESTDIR/NXTP where NXTP defaults to /nxb-bin.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The top of Makefile.inc1 requires TARGET/TARGET_ARCH be defined. Just
building 'make xdev' would already set them, so this error was never
triggered. Moving it to Makefile fixes the problem.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The original change was dealing with the build wanting to run a newer
install(1) that was not yet installed. The solution to look into the private
legacy directory of the existing build conflicts with 2 upcoming features: a
changed OBJDIR format, and splitting the host tools into arch-dependent and
arch-independent directories. Rather than hardcoding and changing the paths in
this script, just let kernel-toolchain do the work, while disabling much of the
meat. With -j15 this finishes in 25 seconds for me and 117 seconds with -j1.
All that is really needed is bootstrap-tools, but the system is not currently
written in a way that all previous dependent steps will have ran. The previous
steps, such as _worldtmp, are being reworked and renamed and so cannot be
relied upon to be right.
Sponsored by: Dell EMC Isilon
Its own build target was already handling mtree extractions
just as _worldtmp did, so the other cleaning of the
tmpdir makes sense here as well.
Sponsored by: Dell EMC Isilon
Only remove them if the option is enabled and also handle libsoft
by using the proper LIBCOMPAT_OBJTREE. LIBCOMPAT:D will expand
the text after it as a proper glob to the command line if LIBCOMPAT
is defined.
Sponsored by: Dell EMC Isilon
The _worldtmp target is for setting up WORLDTMP. Nothing between _worldtmp
and _cleanobj will read these files. Move to its own target since it is
so large.
Sponsored by: Dell EMC Isilon
This leaks into the PATH handling for WORLDTMP and breaks
finding cross-tools. The PATH handling could be fixed to
properly quote but is not worth the effort.
Also allow this sanity check to always run even with 'make -n'.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The bug is an out-of-bounds read detected with address sanitizer that
happens when 'sp' in p_b_coll_elems() includes NUL byte[s], e.g. if it's
equal to "GS\x00". In that case len will be equal to 4, and the
strncmp(cp->name, sp, len) call will succeed when cp->name is "GS" but the
cp->name[len] == '\0' comparison will cause the read to go out-of-bounds.
Checking the length using strlen() instead eliminates the issue.
The bug was found in LLVM with oss-fuzz:
https://reviews.llvm.org/D39380
MFC after: 1 week
Obtained from: Vlad Tsyrklevich through posting on openbsd-tech
fields in the softc; they're ORed together in the ofw_compat_data.
I already caught myself doing 'sc->fectype == <enum val>' without masking
out the feature bits in one place, and that's sure to happen again.
Glomming them together is convenient for storing them in the ofw_compat_data
array, but there's no reason to keep them together in the softc.
We don't need to check if casper is present, this is done in the library itself.
Reviewed by: emaste, cem, ed
Differential Revision: https://reviews.freebsd.org/D8754
When available, enabling this feature causes the hardware to write data
to the receive buffer starting at a 16-bit offset from the start address.
This eliminates the need to copy the data after receiving to re-align
the protocol headers to a 32-bit boundary.
PR: 222634
Submitted by: sebastian.huber@embedded-brains.de
The idea behinds mocks is that we don't need to ifdef a lot of code in
tools itself but those defines are hidden in the casper library.
Right now the mocks are implemented as define/inlines functions.
There was a very long discussion how this should be implemented.
This approach has some advantages like we don't need to link to any additional
libraries. Unfortunately there are also some disadvantages for example it is
easy to get library out of sync between two versions of functions or that we
need extra define to compile program with casper support.
This isn't an ideal solution but it's good enough for now and should simplify
capsicumizing programs. This also doesn't close us any other ways to do those
mocks and this should evolve in time.
Discussed with: pjd, emaste, ed, rwatson, bapt, cem, bdrewery
Differential Revision: https://reviews.freebsd.org/D8753
Newer hardware splits the interrupts onto 3 different irq lines, but the
docs barely mention that there are multiple interrupts, and do not detail
how they're split up. The code now supports 1-3 irqs, and uses the same
interrupt service routine to handle all of them.
I modified the submitted changes to use bus_alloc_resources() instead of
using loops to allocate each irq separately. Thus, blame any bugs on me (I
can't actually test on imx7 hardware).
PR: 222634
Submitted by: sebastian.huber@embedded-brains.de
When the FEC is connected to the AXI bus (indicated by AVB flag), a
MAC reset while a bus transaction is pending can hang the bus.
Instead of resetting, turn off the ENABLE bit, which allows the
hardware to complete any in-progress transfers (appending a bad CRC
to any partial packet) and release the AXI bus. This could probably
be done unconditionally for all hardware variants, but that hasn't
been tested.
PR: 222634
Submitted by: sebastian.huber@embedded-brains.de
This flag is analogous to the Linux driver FEC_QUIRK_HAS_AVB. It
indicates an FEC with support for Audio Video Bridging (AVB). This
indicator is used for various other parts in the Linux driver
(drivers/net/ethernet/freescale/fec_main.c).
Use it to customize the receive/transmit buffer alignment. The receive
buffer alignment increased to 64-bytes on the i.MX 6SoloX and i.MX
7Dual. There are no hard alignment restrictions for transmit buffers on
these chips.
Fix the ffec_softc::fectype type to provide enough storage for the
feature flags.
PR: 222634
Submitted by: sebastian.huber@embedded-brains.de
16 was the correct alignment for older hardware, but the imx7 requires
64-byte alignment, which is a fine value to use on all systems.
PR: 222634
Submitted by: sebastian.huber@embedded-brains.de
When QUEUE_MACRO_DEBUG_TRASH is configured, the queue linkage fields
are trashed upon removal of the item, so be sure to only read them before
removing the item.
No functional change intended.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
To accomodate all variaties of Pi DTS files floating around
we look for MAC address property either in DTS node for
USB ethernet (if it exists) or at predefined path
".../usb/hub/ethernet".
After r324184 smsc_fdt_find_eth_node started to return node
with compatibility string "usb424,ec00" as an eth node.
In imported GNU dts files this node still does not have
MAC address related property, and therefor following check for
"mac-address" and "local-mac-address" fails.
To make this logic more robust do not just search for the node
but also make sure it has required property, so if node with
accepted compatibility string exists but doesn't have the
property we fall back to looking for hardoded path mentioned above.
related to a signed/unsigned mismatch.
This should most likely fix the issue in sctp_sosend reported by
Dmitry Vyukov on the freebsd-hackers mailing list and found by
running syzkaller.
g_mirror_destroy() is supposed to unlock the softc before indicating
success, but it wasn't doing so if the caller raced with another
thread destroying the mirror.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Previously some unimplemented libdtrace routines printed the function,
file and line number, followed by "DOODAD." That is not particularly
informative, so replace it with a message reporting the actual issue.
Sponsored by: The FreeBSD Foundation
Specifically, devices that do not support PCI-e FLR and were not
gracefully shutdown by the guest OS could continue to issue DMA
requests after the VM was terminated. The changes in r305485 meant
that those DMA requests were completed against the host's memory which
could result in random memory corruption. Instead, leave ppt devices
that are not attached to a VM disabled in the IOMMU and only restore
the devices to the host domain if the ppt(4) driver is detached from a
device.
As an added safety belt, disable busmastering for a pass-through device
when before adding it to the host domain during ppt(4) detach.
PR: 222937
Tested by: Harry Schmalzbauer <freebsd@omnilan.de>
Reviewed by: grehan
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D12661
