Commit Graph

37 Commits

Author SHA1 Message Date
kientzle
cc15a03059 Ooops. Back out changes to main.c from r235094.
This change is specific to BeagleBone; I need to figure out how to
generalize this before committing.
2012-05-06 16:32:28 +00:00
kientzle
28b765c847 Don't call strcmp with a NULL pointer.
In particular, on the AM335x, which comes up with no memory
mapped to low addresses, dereferencing the NULL causes a crash.
2012-05-06 16:01:58 +00:00
kientzle
dc0b9b482a Teach ubldr(8) about simple MBR partitioning. 2012-05-01 05:04:49 +00:00
marius
607fe1084c Use the common/shared CRC-32 implementation instead of duplicating it.
MFC after:	1 week
2012-03-21 20:53:47 +00:00
raj
e87823cf6e Improve device tree blob (DTB) handling in loader(8).
Enable using the statically embedded blob from the kernel, if present. The KLD
loaded DTB takes precedence, but they are both recognized and handled in the
same way.

Submitted by:	Lukasz Wojcik
Obtained from:	Semihalf
MFC after:	1 week
2012-03-20 13:08:57 +00:00
andreast
cb931ce693 Rename the linker emulation name for powerpc and powerc64. This is needed that
we can also use the upstream binutils linker where we have to have a unique
name for the FreeBSD emulation.
2011-11-19 19:25:57 +00:00
imp
86c4c6b1df MF tbemd: Minor tweaks, prefer MACHINE_CPUARCH generally to MACHINE_ARCH (which simplifies some powerpc/powerpc64 ifs) 2010-08-23 01:50:34 +00:00
nwhitehorn
88c6aef329 Provide support in loader for booting 64-bit PowerPC kernels. Like amd64,
64-bit PowerPC kernels are loaded by a 32-bit loader, since nearly all
powerpc64 firmwares execute in 32-bit mode.
2010-07-12 00:49:22 +00:00
raj
ca95c68e7d Get rid of bootinfo for good in loader (U-Boot-based) and ARM.
For FDT-enabled platforms the device tree is a modern replacement for bootinfo
config data.
2010-07-11 21:11:23 +00:00
raj
ac8e9a3b12 Fix conditional FDT support in loader(8). 2010-06-13 12:46:32 +00:00
raj
4dbde3c9b9 Initial loader(8) support for Flattened Device Tree.
o This is disabled by default for now, and can be enabled using WITH_FDT at
  build time.

o Tested with ARM and PowerPC.

Reviewed by:	imp
Sponsored by:	The FreeBSD Foundation
2010-05-25 15:21:39 +00:00
raj
09cc0a5006 Mostly revert r200691. U-Boot syscall() entry point returns 1 on success. 2010-05-25 10:15:30 +00:00
raj
691628c174 Use loader devices only when they initialized properly. 2010-05-25 09:59:53 +00:00
raj
43c70d0b64 Minor style correction. 2010-02-25 15:30:26 +00:00
raj
8bf1f0cc2c Fix handling of GPT disk partition index.
Obtained from:	Semihalf
MFC after:	1 week
2010-02-25 15:29:41 +00:00
raj
fe08a5b895 Let loader(8) for U-Boot use default storage more flexibly.
Obtained from:	Semihalf
MFC after:	1 week
2010-02-25 15:27:13 +00:00
marcel
f43cb1c5de Fix ub_env_enum(): syscall() returns 0 when properly invoked. 2009-12-18 21:12:37 +00:00
raj
c80400a132 Provide an effective (relocated) address when building modules metadata.
This lets modules loaded dynamically in loader(8) work for U-Boot-based
platforms.

MFC after:	1 week
2009-11-19 16:25:41 +00:00
antoine
af54d0dea0 - Remove trailing ";" after if statement
- Remove #if 0 section that was never needed/used

Reviewed by:	raj@
MFC after:	1 month
2009-11-11 19:39:45 +00:00
raj
931cd337e4 Make GPT style partitiong endian-safe in U-Boot support library.
Submitted by:	Piotr Ziecik
Obtained from:	Semihalf
2009-06-03 16:28:29 +00:00
marcel
4995d6a865 Fix NETIF_DEBUG compilation. 2009-05-30 19:28:38 +00:00
raj
25b538c6a6 GPT style partitioning for loader(8) with U-Boot support library (tested on
ARM).

Submitted by:	Piotr Ziecik kosmo ! semihalf dot com
2009-05-05 16:29:08 +00:00
raj
8a03e5da47 Improve style(9) in PowerPC U-Boot support lib. 2008-12-17 15:58:07 +00:00
raj
531042bdec Initial storage functionality for U-Boot support library.
- Only non-sliced bsdlabel style partitioning is currently supported (but provisions
  are made towards GPT support, which should follow soon)
- Enable storage support in loader on ARM

Obtained from:	Semihalf
2008-11-19 17:34:28 +00:00
raj
745c5c702f Initial support of loader(8) for ARM machines running U-Boot.
This uses the common U-Boot support lib (sys/boot/uboot, already used on
FreeBSD/powerpc), and assumes the underlying firmware has the modern API for
stand-alone apps enabled in the config (CONFIG_API).

Only netbooting is supported at the moment.

Obtained from:	Marvell, Semihalf
2008-10-14 10:11:14 +00:00
raj
766a91b7a6 Minor style(9) fixes for U-Boot API glue. 2008-10-04 13:19:15 +00:00
raj
2a77c29ada U-Boot API glue improvements:
- extend ub_dev_read() and ub_dev_recv() so that the actual len and
  all error codes can be passed and processed properly; unify behaviour of
  these routines

- introduce syscall general error code (API_ESYSC)
2008-10-04 13:10:38 +00:00
raj
6997451f83 Improve loader support for U-Boot.
- add new diag commands: devinfo, sysinfo for U-Boot-style details about the system
  configuration
- better memory info summary
- style corrections

Obtained from:	Semihalf
2008-09-03 17:48:41 +00:00
raj
f2f831ec34 Make metadata.c shared across all platforms using U-Boot.
This will [soon] be needed for ARM.
2008-09-03 15:52:05 +00:00
raj
c96f761ec1 Move U-Boot compatibility library to WARNS=2 level. 2008-09-03 15:39:50 +00:00
ru
8735fdbd4c Enable GCC stack protection (aka Propolice) for userland:
- It is opt-out for now so as to give it maximum testing, but it may be
  turned opt-in for stable branches depending on the consensus.  You
  can turn it off with WITHOUT_SSP.
- WITHOUT_SSP was previously used to disable the build of GNU libssp.
  It is harmless to steal the knob as SSP symbols have been provided
  by libc for a long time, GNU libssp should not have been much used.
- SSP is disabled in a few corners such as system bootstrap programs
  (sys/boot), process bootstrap code (rtld, csu) and SSP symbols themselves.
- It should be safe to use -fstack-protector-all to build world, however
  libc will be automatically downgraded to -fstack-protector because it
  breaks rtld otherwise.
- This option is unavailable on ia64.

Enable GCC stack protection (aka Propolice) for kernel:
- It is opt-out for now so as to give it maximum testing.
- Do not compile your kernel with -fstack-protector-all, it won't work.

Submitted by:	Jeremie Le Hen <jeremie@le-hen.org>
2008-06-25 21:33:28 +00:00
obrien
d0848f449c style(9) & style.Makefile(9)
Reviewed by:	raj
2008-03-13 17:54:21 +00:00
raj
7e7a99d55a Eliminate artificial increasing of 'netdev_opens' counter in loader's net_open().
This was introduced as a workaround long time ago for some Alpha firmware
(which is now gone), and actually prevented net_close() to ever be
called.

Certain firmwares (U-Boot) need local shutdown operations to be performed on a
network controller upon transaction end: such platform-specific hooks are
supposed to be called via netif_close() (from within net_close()).

This change effectively reverts the following CVS commit:

    sys/boot/common/dev_net.c

    revision 1.7
    date: 2000/05/13 15:40:46;  author: dfr;  state: Exp;  lines: +2 -1
    Only probe network settings on the first open of the network device.
    The alpha firmware takes a seriously long time to open the network device
    the first time.

Also suppress excessive output while netbooting via loader, unless debugging.

While there, make sys/boot/uboot more style(9) compliant.

Reviewed by:	imp
Approved by:	cognet (mentor)
2008-03-12 16:01:34 +00:00
marcel
30c7c35b14 o Include glue.h
o  Support multiple memory regions.
2008-02-23 17:58:12 +00:00
marcel
8b1e9609ca o Build libuboot with -msoft-float like everything else.
o  Move the API prototypes to a separate header (glue.h)
o  Allow the platform to hint libuboot about where to look
   for the API signature. The uboot_address variable is
   expected to be defined by the platform.
2008-02-23 17:56:17 +00:00
marcel
5012ebc1b9 Add the appropriate license information. This file is double
licensed under GPL and BSD.

Thanks to: raj@
2008-02-23 17:52:30 +00:00
marcel
192282ff7a MFp4 (e500):
Add support for U-Boot. This uses the U-Boot API as developed by
Rafal and which is (will be) part of U-Boot 1.3.2 and later.

Credits to: raj@
2008-02-16 22:13:11 +00:00