In case this causes trouble for some other chipsets add a comment how to
proceed. If we don't get bugreports, this should be removed after a while
(some releases?).
PR: 56617 [1], 29465, 39260, 40574, 68225
Submitted by: Matthew E. Gove <mgove@comcast.net> [1]
believe that there are PC98 systems with an OPTi chip.
I don't know enough about this special PC architecture to be sure about
this, so let's find out by letting people with such a system complain in
case this commit breaks the sound system for them. It's easy to revert
then.
PR: 45673
Submitted by: Watanabe Kazuhiro <CQG00620@nifty.ne.jp>
same as today: do no power management. 1 means be conservative about
what you power down (any device class that has caused problems gets
added here). 2 means be agressive about what gets powered down (any
device class that's fundamental to the system is here). 3 means power
them all down, reguardless. The default is 1.
The effect in the default system is to add mass storage devices to the
list that we don't power down. From all the pciconf -l lists that
I've seen for the aac and amr issue, the bad device has been a mass
storage device class.
This is an attempt at a compromise between the very small number of
systems that have extreme issues with powerdown, and the very large
number of systems that gain real benefits from powerdown (I get about
20% more battery life when I attach a minimal set of drivers on my
Sony). Hopefully it will strike the proper balance.
MFC After: 3 days (before next beta)
* New definition CHN_F_HAS_VCHAN.
- channel.c
* Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead
of relying on SLIST_EMPTY(&channel->children) == true for better
clarification and future possible usages of children (like
'slave' channel).
* Various fixes, including blocksize / format bps allignment,
better 24bit seeking (mplayer, others).
* Improve format chain building, it's now possible to record something
to a format non-native to the soundcard through various feeder format
converters or to higher sampling rate. This also gains another feature,
like doing vchan mixing on non s16le soundcard such as sb8.
- sound.c
* Increase robustness within various function that handle vchan
creation / termination (these function need a total rewrite, but
that would cause other major rewrite within various places too!).
As far as its robustness can be guaranteed, leave it as is.
* Optimize channel ordering, prefer *real* hardware playback
channels over virtual channels. cat /dev/sndstat should look
better.
* Increase sndstat verbosity to include bufsoft/bufhard allocation.
- vchan.c
* Fix LOR 119.
- http://sources.zabbadoz.net/freebsd/lor.html#119
* Reorder / increase robustness of vchan_create() / destroy().
Enforce destroy_dev() during destroy operation, fix possible
panic / dangling character device.
- http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html
* Tolerate a little bit more during mixing process, this should help
non s16le soundcards.
Note: Recoring in a non-native rate/format may result in overruns. A friendly
application is wavrec from audio/wavplay. The problem is under
investigation.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
From the PR:
---snip---
The vibra16X supports full duplex. I traced the Windows driver, and what is
does is that it programs one DMA channel 8-bit, and the other 16-bit. There
might be some kind of auto detection logic here, because it always uses 8-bit
for playback, even if I play 16-bit sound ...
---snip---
PR: 80977
Submitted by: Hans Petter Selasky <hselasky@c2i.net>
Reduce the size of ed a little by removing some CIS based entries (others
likely can be removed too):
o The D-Link DFE-670TXD doesn't need its own entry based on strings.
o The Xircom CompactCard appears to be a TDK design, so list it there by ID
and remove the strings.
Increase the size of ed a little:
o Add support for the Addtron AE-660CT and Addtron AE-660. This is a very
generic NE-2000 clone (so generic that its CIS tags say NE-2000 generic
card!).
here is the support for amd64, as well as possible support for PAE. Many
thanks to Highpoint for continuing to support FreeBSD.
Obtained from: Steve Chang @ Highpoint
MFC After: 3 days.
o Note that the first 255 locations are reserved for JEDEC Ids from
publication 106 (current revision Q, each one verified with
JEDEC and the PMCICA).
o Move ADAPTEC2 to the right section.
o Sort TOSHIBA2 numerically.
dl100xx case.
o We no longer acquire and release resources during attach many times. We now
do it once at the beginning.
o Move setting the resource offsets to just after acquiring the ports in
attach.
o Move ax88x90 code to the end of the file, just after the dl100xx specific
code.
o Rename ed_pccard_Linksys to ed_pccard_dl100xx to reflect the underlying
chipset.
o Pass the ed_product structure into ed_pccard_{dl100xx,ax88x90} and have
those routines test the flags to see if this card should be probed in that
way.
o transition from ed_probe_Novell to ed_probe_Novell_generic since we already
have the resources setup.
o Move use of ed_probe_Novell_generic into ed_pccard_dl100xx to be more
consistant with ax88x90 case.
o simplify the code where we probe for the chipsets
the probe code that this used to be part of, but as part of the
attach, we shouldn't be dropping the resources here.
Also, allocate the proper rid in the ax88x90 setup.
as yet unknown, those cards report their MAC address a byte at a time.
However, other AX88x90 cards report the MAC address a word at a time.
Add a heuristic which looks at the high order bytes of the first 6
words. If they are all '0', assume the card is behaving like the
Linksys EC2T card. Since the default prefix for these cards appears
to be 00:e0:98, this appears to be a safe heuristic. While some cards
have been observed with different prefixes, they all work with this
heuristic.
I'm unsure if this is a bug in the EC2T card, or if it is a bug in the
initialization of the card. No other OS has this heuristic (although
w/o it, the MAC address that is used works).
listed in different orders. Since it is easy to identify the Modem
resources vs the Ethernet resources by looking at the size, use that
rather than hard coded rids. For such parts, go ahead and guess which
rid we should use based on the size. This guess appears reliable for
the two example cards that I have with different CIS info.
return the correct bar size if we encountered a 64-bit BAR that had
its resources already assigned. If the resources weren't yet
assigned, we'd bogusly assume it was a 32-bit bar and return 1.
PROM by bytes. Adjust the extraction of the MAC address from this data
to reflect this change.
This gets the AX88x90 based PC Cards MAC address working again (my
UMAX Ethernet and Linksys EC2T cards now work).
MFC After: 3 days
- Always check mdnew() return value, as even in !autounit case
kthread_create() can fail.
Those two changes fix serval panics provked by simple stress test.
Tested by: Kris The BugMagnet
MFC after: 3 days
- Set errno to ENXIO instead of 0 in several attach failure cases.
- Setup the interrupt handler at the very end of txp_attach() after
ether_ifattach().
- Various whitespace fixes in function prototypes.
by explicitly setting sc->font_width, in the same
places where sc->font_size is set, instead of
relying on the default initialized value of 0 for sc->font_width.
PR: kern/84836
Reported by: Andrey V. Elsukov <bu7cher at yandex dot ru>
MFC after: 2 days
