Those tools were modified and extended by John Marino <draco@marino.st>
Add the generated charmaps and maps for LC_CTYPE generation
Obtained from: Dragonfly
with the net80211 stack.
Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.
Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:
- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.
Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.
Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:
https://wiki.freebsd.org/projects/ifnet/net80211
Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.
Differential Revision: D2655, D2740
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
ethernet controller. The ethernet controller is emulated by VMware
Fusion (for example) and is a good device to demonstrate how to use
the bus space and busdma functions due to its simple programming.
The program sets up the DMA structures, sends a DHCP discover packet,
waits 2 seconds, and iterates over the receive ring for an offer.
ELF Tool Chain elfcopy is nearly a drop-in replacement for GNU objcopy,
but does not currently support PE output which is needed for building
x86 UEFI bits.
Add a src.conf knob to allow installing it as objcopy and set it by
default for aarch64 only, where we don't have a native binutils.
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2887
identification (e.g. isa:0x3f0 or pci0:2:1:0). In libbus,
the device is turned into a path name. For bus_space_map(),
the resource is now specified in a second argument.
Before:
bus.map('/dev/proto/pci0:2:1:0/pcicfg')
busdma.tag_create('/dev/proto/pci0:2:1:0/busdma', ...)
Now:
bus.map('pci0:2:1:0', 'pcicfg')
busdma.tag_create('pci0:2:1:0', ...)
Rationale: ident(1) is useful out of RCS, lot of scripts are using ident(1) and
failing when base is built WITHOUT_RCS.
This version is:
- fully compatible with RCS 5.7 ident.
- fully compatible with RCS 5.9 ident.
- passes all ident test from GNU RCS 5.9 test suite
This version has support for: svn extension for the Keyword id (double colon and
# before last $)
Différences with GNU RCS ident:
- no long options as found in GNU RCS 5.9 (but not commented there).
- '-V' reports nothing but has been added for compatibility.
Differential Revision: https://reviews.freebsd.org/D3200
Reviewed by: pfg
because for no mailwrapper case we have:
/usr/sbin/sendmail -> /usr/sbin/mailwrapper
/usr/sbin/mailwrapper -> /usr/libexec/sendmail/sendmail
Add comment explaining it.
While here:
1. have the Python bindings contain constants for the space
identifiers and the sync operation.
2. change the segment iterators to return None when done,
not ENXIO.
It is required for other tools in base and/or ports like dma(8) or any MTA
available in ports. It is also build and installed anyway even if world is built
WITHOUT_SENDMAIL
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
This change among other things improve search capabilities over the manpages
allowing fine grain query.
A new build option WITHOUT_MANDOCDB has been added to keep the ancient version
of the database and the tools. The plan is to entirely remove this option before
11.0-RELEASE.
Differential Revision: https://reviews.freebsd.org/D2603
Clang uses compiler-rt for the code coverage runtime, and ports GCC
provides its own libgcov.
PR: 200203 (exp-run)
Sponsored by: The FreeBSD Foundation
Without these CFLAGS settings a cross-compile won't find the headers
anywhere.
Tested:
* mips (32, big endian) cross-build w/ LOCAL_DIRS including these
tools.
previous releases.
Also add a stdlib.h wrapper, which declares the function, otherwise the
compiler may assume it returns int, which can cause segfaults on LP64
architectures.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D2558
Clang's OpenMP support will emit Intel OpenMP API library calls,
and will therefore require libiomp (or whatever name is settled on).
An up-to-date version of libgomp is included in ports or pkg GCC.
Thus, there is no reason to build base libgomp without base system GCC.
PR: 199979 (exp-run)
Reviewed by: pfg
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2459
- Optional components go in OptionalObsoleteFiles
- Move gperf removal to be based on MK_GCC only, not MK_CXX and MK_GCC
Reviewed by: imp, sbruno
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2421
-- Fix whitespace
-- Use err/errx
-- Remove superfluous braces
- Be a bit more defensive with input from the end-user
- Don't throw a floating point exception by dividing by 0 when processing a
zero-byte file
MFC after: 1 week
linked libraries. Only do this for BSS symbols that have a size which avoids
__bss_start. Without this some libraries would be considered unneeded even
though they were providing a B symbol.
- Add in the symbols from crt1.o to cover a handful of common unresolved symbols.
- Consider (C) common data symbols as provided by libraries/crt1.
- Move libkey() function to more appropriate place.
Sponsored by: EMC / Isilon Storage Division
Ran against /usr/local/sbin/pkg:
Before: 25.12 real 12.41 user 33.14 sys
After: 0.53 real 0.49 user 0.13 sys
- Exit with 1 if any missing or unresolved symbol is detected.
- Add option '-U' to skip looking up unresolved symbols.
- Don't consider provided weak objects as unresolved (nm V).
Sponsored by: EMC / Isilon Storage Division
IPv4 addresses/ports.
When doing traffic testing of actual code that /does/ things to the
packet (rather than say, 'bridge.c'), it's typically a good idea to
use a variety of cache-busting and flow-tracking-busting packet
spreads. The pkt-gen method of testing an IP range was to walk
it linearly - which is fine, but not useful enough.
This can be used to completely randomize the source/destination
addresses (eg to test out flow-tracking-busting) and to keep the
destination fixed whilst randomising the source (eg to test out
what a DDoS may look like.)
Tested:
* Intel ixgbe 10G (82599) netmap
Differential Revision: https://reviews.freebsd.org/D2309
MFC after: 2 weeks
Sponsored by: Norse Corp, Inc.
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
-- Fix whitespace
-- Use err/errx
-- Remove superfluous braces
- Be a bit more defensive with input from the end-user
- Don't die dividing by 0 on a zero-byte file
testcases into the .c file
- Require root for now because it fails with SOCK_RAW without root privileges
- Increment the test count properly on socket create failure
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Make the socket path random and move it out of /tmp as that's outside ATF's
prescribed path
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Replace a hardcoded PATH_MAX value with sizeof(path)
- Use path like an array, not a pointer, and always try to unlink it in cleanup
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Randomize the bind port to allow 2+ consecutive calls in < 10 minutes, and
to also not fail if (for instance) there's a server already listening on port
8080
- Don't leak the listening socket / fds into the child process
- Fix warnings:
-- Remove argc/argv (-Wunused)
-- Mark sig __unused (-Wunused)
-- Mark quit static (-Wmissing-variable-declarations)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
The output is still broken if prove -rv is run and the testcase aborts
prematurely with fail_assertion (the testcase doesn't really conform to TAP
protocol properly, except when it completes fully)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
The testcase fails today on subtest # 9
The output is still broken if prove -rv is run and the testcase aborts
prematurely (the testcase doesn't really conform to TAP protocol properly,
except when it completes fully)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Fix not finding global symbols by checking for D and R.
- Follow symlinks
- Show which matching symbol was used to consider the library needed.
Discussed with: bapt
core file, much like 'netstat -anr' does it for living kernel.
Right now only AF_INET routing table is printed. AF_INET6 needs to
be done. But the most difficult part of the script (recursion!) is
complete.
Sponsored by: Nginx, Inc.
- Convert errx(-1, ..) to errx(1, ..)
- Move the aio(4) checks to a single function (aio_available); use modfind(2)
instead of depending on SIGSYS (doesn't work when aio(4) support is missing,
not documented in the aio syscall manpages).
- Use aio_available liberally in the testcase functions
- Use mkstemp(3) + unlink(2) instead of mktemp(3)
- Fix some -Wunused warnings
- Bump WARNS to 6
MFC after: 1 week
Submitted by: mjohnston [*]
Sponsored by: EMC / Isilon Storage Division
- Move to ANSI definitions syntax, removing warnings about type promotions.
- Remove __P().
- Staticise everything.
- Remove warnings about unused args for signal handlers.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
utilities.
I was originally planning on removing the phase-of-moon (pom), clock
(grdc), and caesar cipher (caesar, rot13) utilities as well, but after
I committed r278616 I received an astonishing volume of email informing
me that those are still being widely used. Much to my relief, nobody
reported continuing to use the punch card utilities in production.
The final step will be to merge src/games into src/usr.bin.
This change will not be MFCed.
update paths; and include everything in the "base" distribution.
The "games" distribution being optional made sense when there were more
games and we had small disks; but the "games-like" games were moved into
the ports tree a dozen years ago and the remaining "utility-like" games
occupy less than 0.001% of my laptop's small hard drive. Meanwhile every
new user is confronted by the question "do you want games installed" when
they they try to install FreeBSD.
The next steps will be:
2. Removing punch card (bcd, ppt), phase-of-moon (pom), clock (grdc), and
caesar cipher (caesar, rot13) utilities. I intend to keep fortune, factor,
morse, number, primes, and random, since there is evidence that those are
still being used.
3. Merging src/games into src/usr.bin.
This change will not be MFCed.
Reviewed by: jmg
Discussed at: EuroBSDCon
Approved by: gjb (release-affecting changes)
This corresponds with the branchpoint for the 3.6 release.
A number of files not required for the FreeBSD build have been removed.
Sponsored by: DARPA, AFRL
