Commit Graph

4987 Commits

Author SHA1 Message Date
sos
cc816837b4 Fix the PCCARD ATA breakage..
This is due to a bug that has been in there since Warneer did the
PCCARD stuff, the altioaddr is not offset 8 its offset 14 from
the base address.
Also only probe the master device, no known PCCARD ATA thingies
has a slave AFAIK..
2000-10-30 09:36:40 +00:00
phk
db841f6fcc Remove unneeded <stddef.h> #includes. 2000-10-29 16:57:42 +00:00
dwmalone
1978e2e6ea Make a few more mallocs use M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
Approved by:	imp
2000-10-29 16:29:05 +00:00
phk
ff5cdfae2d Move suser() and suser_xxx() prototypes and a related #define from
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00
dwmalone
7d9d396fd5 Add the use of M_ZERO to some malloc calls.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
Approved by:	gibbs
2000-10-29 15:47:16 +00:00
phk
f82e4ca62c Weaken a bogus dependency on <sys/proc.h> in <sys/buf.h> by #ifdef'ing
the offending inline function (BUF_KERNPROC) on it being #included
already.

I'm not sure BUF_KERNPROC() is even the right thing to do or in the
right place or implemented the right way (inline vs normal function).

Remove consequently unneeded #includes of <sys/proc.h>
2000-10-29 14:54:55 +00:00
phk
94a5006c9a Remove unneeded #include <sys/proc.h> lines. 2000-10-29 13:57:19 +00:00
darrenr
1c98ed58fc fix warning compile error about unused variable 2000-10-29 10:07:43 +00:00
phk
4322514097 Fix params passed to pci_porten() and pci_memen(). 2000-10-29 09:59:28 +00:00
non
46bec1fd0f Change flags of ncv and nsp driver. Both were conflicted with the flags
used in lower layer (scsi_low.c).

The flag of ncv for KME KXLC004 was chaged from 0x1 to 0x100.
The flag of nsp for PIO mode was chaged from 0x1 to 0x100.
2000-10-29 06:54:32 +00:00
non
b569d2a370 Remove unnecessary printf(). 2000-10-29 06:03:47 +00:00
msmith
0d5903ca0d Unconditionally turning on the I/O and memory enable bits in the PCI
command register is too aggressive.  Revert to the previous behaviour, but
leave the new behaviour available as an undocumented option.  It's not
clear what the Right, Right Thing is to do here, but the more conservative
approach is safer.
2000-10-28 23:07:13 +00:00
cg
0ecc67db2e add commented-out dependancies on the new sb8 and sb16 drivers 2000-10-28 19:35:54 +00:00
cg
ceaa4e2ae6 split up sb16 and sb/sbpro drivers
we do not support sb versions <2.00, and the sb8 driver has not been tested
yet.

these drivers are not yet enabled by default.
2000-10-28 19:20:03 +00:00
nyan
18652ae093 Removed extra calculation for X position (PC-98 only).
Submitted by:	chi@bd.mbn.or.jp (Chiharu Shibata)
2000-10-28 10:59:21 +00:00
msmith
6f69682320 Return -10 from the PCI probe to allow room for an updated driver to
override one built into the kernel.
2000-10-28 10:46:30 +00:00
peter
f86db637cd Fix typo s/DE_DEVICEID_FE2500/DC_DEVICEID_FE2500/ 2000-10-28 10:03:54 +00:00
wpaul
a5f3fd7958 Add PCI IDs for some additional cardbus cards. Yes, there really is
a RealTek 8139 cardbus device. Unfortunately it doesn't quite work yet
because the CIS parser barfs on it.

Submitted by msmith, with some small tweaks by me.
2000-10-28 09:00:20 +00:00
msmith
5dd41ba26a Allow PCI busses to be connected to host bridges detected by ACPI as well. 2000-10-28 07:04:07 +00:00
msmith
a69e8faa90 Initial FreeBSD OSPM (operating system power management) modules for
ACPICA.  Most of these are still works in progress.  Support exists for:

 - Fixed feature and control method power, lid and sleep buttons.
 - Detection of ISA PnP devices using ACPI namespace.
 - Detection of PCI root busses using ACPI namespace.
 - CPU throttling and sleep states (incomplete)
 - Thermal monitoring and cooling control (incomplete)
 - Interface to platform embedded controllers (mostly complete)
 - ACPI timer (incomplete)
 - Simple userland control of sleep states.
 - Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
msmith
64e150eaa4 FreeBSD-specific OSD (operating system dependant) modules for the Intel
ACPICA code.
2000-10-28 06:56:15 +00:00
msmith
25d887ad27 Fix typo in the 4.x case. 2000-10-27 23:40:45 +00:00
cg
53904fdeb6 implement SNDCTL_DSP_POST 2000-10-27 22:20:45 +00:00
phk
16690ed6af Remove 86 unneeded #includes 2000-10-27 21:32:10 +00:00
phk
54ca48450c Convert all users of fldoff() to offsetof(). fldoff() is bad
because it only takes a struct tag which makes it impossible to
use unions, typedefs etc.

Define __offsetof() in <machine/ansi.h>

Define offsetof() in terms of __offsetof() in <stddef.h> and <sys/types.h>

Remove myriad of local offsetof() definitions.

Remove includes of <stddef.h> in kernel code.

NB: Kernelcode should *never* include from /usr/include !

Make <sys/queue.h> include <machine/ansi.h> to avoid polluting the API.

Deprecate <struct.h> with a warning.  The warning turns into an error on
01-12-2000 and the file gets removed entirely on 01-01-2001.

Paritials reviews by:   various.
Significant brucifications by:  bde
2000-10-27 11:45:49 +00:00
markm
6458d733a9 As the blocking model has seems to be troublesome for many, disable
it for now with an option.

This option is already deprecated, and will be removed when the
entropy-harvesting code is fast enough to warrant it.
2000-10-27 06:06:04 +00:00
msmith
a01491f904 Add PCI device ID for an upcoming revision of the product. 2000-10-27 05:58:45 +00:00
msmith
e083202c14 Add a missing newline to a diagnostic. 2000-10-27 05:58:16 +00:00
wpaul
f05284397e Yet another bug fix/optimization for the Davicom DM9100/9102: increase
the PCI latency timer value to 0x80. Davicom's Linux driver does this,
and it drastically reduces the number of TX underruns in my tests. (Note:
this is done only for the Davicom chips. I'm not sure it's a good idea to
do it for all of them.)

Again, still waiting on confirmation before merging to stable.
2000-10-27 00:15:04 +00:00
cg
f395b4d615 add reinit functions to mixers
unstaticize chn_start()
add reset/resetdone functions to channels
2000-10-26 20:46:58 +00:00
cg
d877bb8d5a do not attach to soundblaster 1.x - they are unsupported 2000-10-26 20:31:16 +00:00
roger
01661fd81c Add new ioctls for userland access to the MSP device 2000-10-26 16:41:48 +00:00
roger
5da6991eda Fix typo 2000-10-26 16:27:51 +00:00
cg
faddab638d handle AFMT_QUERY right 2000-10-26 01:34:54 +00:00
wpaul
523c773acc Set the DC_TX_INTR_ALWAYS and DC_TX_STORENFWD flags for the Davicom
DM9100/DM9102 chips. Do not set DC_TX_ONE. The DC_TX_USE_TX_INTR flag
causes dc_encap() to set the 'interrupt on TX completion' bit only
once every 64 packets. This is an attempt to reduce the number
of interrupts generated by the chip. You're supposed to get a 'no more
TX buffers left' interrupt once you hit the last packet whether you
ask for one or not, however it seems the Davicom chip doesn't generate
this interrupt, or at least it doesn't generate it under the same
circumstances. The result is that if you transmit n packets, where
n is less than 64, and then wait 5 seconds, you'll get a watchdog
timeout whether you want one or not. The DC_TX_INTR_ALWAYS causes
dc_encap() to request an interrupt for every frame.

I'm still waiting on confirmation from a couple of users to see if this
fixes their problems with the Davicom DM9102 before I merge this into
-stable, but this fixed the problem for me in my own testing so I'm
willing to make the change to -current right away.
2000-10-25 23:46:31 +00:00
wpaul
385109d266 Add a missing SK_UNLOCK() to sk_attach_xmac(). 2000-10-25 23:36:45 +00:00
jhb
220ad0d5b5 This driver doesn't have a software interrupt handler, so don't attempt to
schedule a non-existant handler to run.
2000-10-25 21:29:36 +00:00
jhb
a2d3e81fbe Catch up to the new software interrupt code.
Noticed by:	phk
2000-10-25 21:24:08 +00:00
jhb
9a534580a4 - Catch up to new software interrupt code.
- Add a missing curly brace.

Noticed by:	phk
2000-10-25 21:13:42 +00:00
n_hibma
71ac041c16 The USB scanner driver. To be used together with SANE. 2000-10-25 10:34:38 +00:00
n_hibma
e885acb3b9 Regen. 2000-10-25 10:14:44 +00:00
n_hibma
95f62ef43c Sync with NetBSD 2000-10-25 10:13:47 +00:00
msmith
a020bb21aa Major update to the 'twe' driver.
- Layout reorganisation to enhance portability.  The driver now has
   a relatively MI 'core' and a FreeBSD-specific layer over the top.
   Since the NetBSD people have already done their own port, this is
   largely just to help me with the BSD/OS port.

 - Request ID allocation changed to improve performance (I'd been
   considering switching to this approach after having failed to come
   up with a better way to dynamically allocate request IDs, and seeing
   Andy Doran use it in the NetBSD port of the driver convinced me
   that I was wasting my time doing it any other way).  Now we just
   allocate all the requests up front.

 - Maximum request count bumped back to 255 after characterisation
   of a firmware issue (off-by-one causing it to crash with 256
   outstanding commands).

 - Control interface implemented.  This allows 3ware's '3dm' utility to
   talk to the controller.  3dm will be available from 3ware shortly.

 - Controller soft-reset feature added; if the controller signals a
   firmware or protocol error, the controller will be reset and all
   outstanding commands will be retried.
2000-10-25 06:59:06 +00:00
jhb
ff18363a3e - Overhaul the software interrupt code to use interrupt threads for each
type of software interrupt.  Roughly, what used to be a bit in spending
  now maps to a swi thread.  Each thread can have multiple handlers, just
  like a hardware interrupt thread.
- Instead of using a bitmask of pending interrupts, we schedule the specific
  software interrupt thread to run, so spending, NSWI, and the shandlers
  array are no longer needed.  We can now have an arbitrary number of
  software interrupt threads.  When you register a software interrupt
  thread via sinthand_add(), you get back a struct intrhand that you pass
  to sched_swi() when you wish to schedule your swi thread to run.
- Convert the name of 'struct intrec' to 'struct intrhand' as it is a bit
  more intuitive.  Also, prefix all the members of struct intrhand with
  'ih_'.
- Make swi_net() a MI function since there is now no point in it being
  MD.

Submitted by:	cp
2000-10-25 05:19:40 +00:00
mjacob
08451a100d Get rid of ridiculous ISP_PVS macro. Instead, just set an
ISP_SMPLOCK define based on the previous 5.4 major/minor release
define of PVS- because this allows us to turn it off easier.
2000-10-25 04:42:46 +00:00
mjacob
e31c79ac13 Whoops! Forgot to commit this when I committed the other (turnin on locks)
change. Sorry about that.
2000-10-25 04:40:49 +00:00
wpaul
deefde18d9 Convert the USB ethernet drivers to use mutexes. Also convert
usb_ethersubr.c. This module maintains two queues for packets which
are each protected with one mutex. These are all the changes I can
do for now. Removing the USBD_NO_TSLEEP flag doesn't work yet: when
I tried it, the system would usually freeze up after a NIC had been
operating for a while. The usb_ethersubr module itself ought to
go away; this is the next thing I need to test.
2000-10-24 22:38:54 +00:00
sos
4e93b6013f Fix the problem with DMA mode not working on Aladdin chips.
Amasing in how many ways Acer has screwed up that chip.
2000-10-24 13:50:22 +00:00
babkin
d917e68c30 Added the CAM-ified wds driver for the ancient WD7000 SCSI card.
Last time it was present in FreeBSD 3.x, before CAM.

Reviewed by:	gibbs
Approved by:	gibbs
2000-10-24 03:44:31 +00:00
non
8e8d8815fa Add PC-Card/ISA SCSI host adpater drivers from NetBSD/pc98
(a NetBSD port for NEC PC-98x1 machines). They are ncv for NCR 53C500,
nsp for Workbit Ninja SCSI-3, and stg for TMC 18C30 and 18C50.

I thank NetBSD/pc98 and bsd-nomads people.

Obtained from:	NetBSD/pc98
2000-10-23 12:55:51 +00:00