This fixes a failure to resolve object file paths seen when buildkernel
(which sets MK_AUTO_OBJ=yes) and installkernel (which sets MK_AUTO_OBJ=no)
are run as separate steps. r329232 partially fixed this scenario by removing
MAKEOBJDIR, but it seems the AUTO_OBJ setting also needs to be on the same
page for the build and install steps.
Reviewed by: bdrewery
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14143
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
This came about when r328489 made ports modules builds no longer use the
in-tree share/mk files, but didn't cleanup MAKEOBJDIR from the
environment.
This fixes "Variable OBJTOP is recursive".
Sponsored by: Dell EMC
Previously, MAKESYSPATH as well as '-m' directives in MAKEFLAGS would cause
any port rebuilt during the PORTS_MODULES stage to consume system makefiles
from $(SRCROOT)/share/mk instead of those installed under /usr/share/mk.
For kernel modules that need to build against an updated src tree this
makes sense; less so for <bsd.port.mk> or any userspace library or utility
the port may also happen to install.
Before 11.0, this probably didn't matter much in practice. But the addition
of src.libnames.mk under $(SRCROOT)/share/mk in 11.0 breaks any consumer of
bsd.prog.mk and DPADD/LDADD during PORTS_MODULES.
Address the build breakage by removing MAKESYSPATH and any occurrence of
'-m' from MAKEFLAGS in the environment created for the port build.
Instead set SYSDIR so that any kmod built by the port will still consume
conf/kmod.mk from the updated src tree, assuming it uses <bsd.kmod.mk>
Reviewed by: bdrewery
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13053
Both flags do the same thing but -n is more widely supported.
Reviewed By: jhb, emaste
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D13936
This was a regression in r320220 due to improper porting of the
same logic from share/mk/bsd.dep.mk and having only tested with
-DNO_FILEMON at the time.
Pointyhat to: bdrewery
Reported by: Mark Millard, dhw, O. Hartmann
Sponsored by: Dell EMC Isilon
- Rename _SKIP_READ_DEPEND to _SKIP_DEPEND since it also avoids writing.
- This now uses .NOMETA to avoid reading any .meta files related to
DEPENDOBJS. Objects not in OBJS/DEPENDOBJS may still have their .meta
files read in if they are in the dependency graph.
- This also avoids statting .meta and .depend files in the META_MODE +
-DNO_FILEMON case.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
"all" in ports currently means "stage the ports", which requires root today,
and brings to light other potential issues, like ENAMETOOLONG with staged
directories (bug 161481, etc).
This fixes buildkernel for me when run as a non-root user, assuming all
of the prerequisites have been installed beforehand and are up-to-date.
MFC after: 1 month
Discussed with: swills (IRC)
Sponsored by: Dell EMC Isilon
The build process generates *assym.h using nm from *genassym.o (which is
in turn created from *genassym.c).
When compiling with link-time optimization (LTO) using -flto, .o files
are LLVM bitcode, not ELF objects. This is not usable by genassym.sh,
so remove -flto from those ${CC} invocations.
Submitted by: George Rimar
Reviewed by: dim
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9659
to recreate it from ${MAKEOBJDIRPREFIX} and ${SRC_BASE} and ${KERNCONF},
the latter being especially problematic when KERNCONF is set to the names
of multiple kernel configs.
The kernel builds reproducibly, except for the time, date, user, and
hostname baked into the kernel (reported at startup and via the
kern.version sysctl for uname). Add a build knob to disable the
inclusion of this metadata.
Reviewed by: jhb
MFC after: 1 month
Relnotes: Yes
Sponsored by: Reproducible Builds World Summit 2, Berlin
Differential Revision: https://reviews.freebsd.org/D8809
build can break when different source files create the same target
files (case-insensitivity speaking). This is the case for object
files compiled with -fpic and shared libraries. The former uses
an extension of ".So", and the latter an extension ".so". Rename
shared object files from *.So to *.pico to match what NetBSD does.
See also r305855
MFC after: 1 month
Sponsored by: Bracket Computing
Differential Revision: https://reviews.freebsd.org/D7906
An optimization is in place to skip reading the .depend.* files with
'make install'. This was too strong and broke 'make all install' and
'make foo.o foo install'. Now only skip reading the dependency files
if all make targets ran are install targets.
The problem comes about because headers are only added in as a guessed
dependency if .depend.* files do not yet exist. If they do exist, even
if being skipped from being read, then the header dependencies are not
applied. This applies to all #included files, and not just headers.
Reported by: kib
MFC after: 1 day
Sponsored by: EMC / Isilon Storage Division
These may have ccache in them or -target/--sysroot from external
compiler or SYSTEM_COMPILER support. Many ports do not support
a CC with spaces in it, such as emulators/virtualbox-ose-kmod.
Passing --sysroot to ports makes no sense as ports doesn't support
--sysroot currently.
If these variables need to be overridden for ports then they can
be set in make.conf or passed as make arguments.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
The DPADD data in .depend will be redundant with what is in the .meta file.
Also extend NO_EXTRADEPEND support to bsd.prog.mk.
Approved by: re (blanket, META_MODE)
Sponsored by: EMC / Isilon Storage Division
This is a follow-up to r300343.
This is important for the OBJS_DEPEND_GUESS usage in
gnu/usr.bin/cc/cc_tools.
See comments for more details.
Approved by: re (implicit)
Sponsored by: EMC / Isilon Storage Division
default. At least initially, the feature to support multiple TCP stacks is
aimed at supporting advanced use cases and TCP development, but it is not
necessarily aimed at a wide audience. Therefore, there is no need to build
and install the extra TCP stacks by default. Instead, the people who are
using or developing this functionality can add the extra option to build/
install the extra TCP stacks.
However, we do want to build the extra TCP stacks as part of test builds
(e.g. LINT or tinderbox) to ensure that developers who are testing their
changes will know that their changes do not break the additional TCP
stack modules.
After this change, a user will need to add WITH_EXTRA_TCP_STACKS=1 to
make.conf or the kernel config in order to build the extra TCP modules.
Differential Revision: https://reviews.freebsd.org/D6795
Reviewed by: sjg
Approved by: re (kib)
This breaks cross-building with WITH_META_MODE since it will rebuild
'build-tools' during the 'everything' phase.
A more proper fix is coming to bmake to implicitly require .META unless
.NOMETA (and other restrictions) are in place.
Adding .META to targets-to-build will ensure that they will rebuild if there
is no .meta file.
Adding it to all SUFFIXES and objects ensures that at least objects will
rebuild if there is no .meta file.
This will be reverted if bmake's behavior changes to rebuild on missing .meta
files.
Sponsored by: EMC / Isilon Storage Division
This is the same problem as r290629. With META_MODE we do not generate
.depend files, so there is no proper dependency to lookup. Guessed
dependencies must be used. If this proves to be a problem then we will
have to generate and use .depend files even with META_MODE.
Sponsored by: EMC / Isilon Storage Division
The additional regex replacements are actully required due to an
elfcopy bug which is now fixed (by r298361), not a Clang/GCC issue.
Sponsored by: The FreeBSD Foundation
Newest CLANG objcpy uses different name parsing.
Modify regexp to match (i.e. avoid substitution
of "/" or "-" with "_").
Obtained from: Semihalf
Sponsored by: Juniper Networks
Reviewed by: hselasky, zbb
Differential Revision: https://reviews.freebsd.org/D5873
The inclusion of .MAKE.DEPENDFILE (.depend) has special logic in make
to ignore stale/missing dependencies. bmake 20160220 added a '.dinclude'
directive that uses the special logic for .depend when including the file.
This fixes a build error when a file is moved or deleted that exists in a
.depend.OBJ file. This happened in r292782 when sha512c.c "moved" and an
incremental build of lib/libmd would fail with:
make: don't know how to make /usr/src/lib/libcrypt/../libmd/sha512c.c. Stop
Now this will just be seen as a stale dependency and cause a rebuild:
make: /usr/obj/usr/src/lib/libmd/.depend.sha512c.o, 13: ignoring stale .depend for /usr/src/lib/libcrypt/../libmd/sha512c.c
--- sha512c.o ---
...
This rebuild will only be done once since the .depend.sha512c.o will
be updated on the build with the -MF flags.
This also removes -MP being passed for the .depend.OBJ generation (which
would create fake targets for system headers) since the logic is no
longer needed to protect from missing files.
Sponsored by: EMC / Isilon Storage Division
This will generate dependencies rather than depending on the previous behavior
of depending on the guessed OBJS: *.h dependecies or a user running
'make depend'.
Experimentation showed that depending only on headers was not enough and
prone to .ORDER errors. Downstream users may also have added
dependencies into beforedepend or afterdepend targets. The safest way to
ensure dependencies are generated before build is to run 'make depend'
beforehand rather than just depending on DPSRCS+SRCS.
Note that the OBJS_DEPEND_GUESS mechanism (a.k.a .if !exists(.depend) then
foo.o: *.h) is still useful as it improves incremental builds with missing
.depend.* files and allows 'make foo.o' to usually work, while this
'beforebuild: depend' ensures that the build will always find all dependencies.
The 'make foo.o' case has no means of a 'beforebuild' hook.
This also removes several hacks in the DIRDEPS_BUILD:
- NO_INSTALL_INCLUDES is no longer needed as it mostly was to work around
.ORDER problems with building the needed headers early.
- DIRDEPS_BUILD: It is no longer necesarry to track "local dependencies" in
Makefile.depend.
These were only in Makefile.depend for 'clean builds' since nothing would
generate the files due to skipping 'make depend' and early dependency
bugs that have been fixed, such as adding headers into SRCS for the
OBJS_DEPEND_GUESS mechanism. Normally if a .depend file does not exist then
a dependency is added by bsd.lib.mk/bsd.prog.mk from OBJS: *.h. However,
meta.autodep.mk creates a .depend file from created meta files and inserts
that into Makefile.depend. It also only tracks *.[ch] files though which can
miss some dependencies that are hooked into 'make depend'. This .depend
that is created then breaks incremental builds due to the !exists(.depend)
checks for OBJS_DEPEND_GUESS. The goal was to skip 'make depend' yet it only
really works the first time. After that files are not generated as expected,
which r288966 tried to address but was using buildfiles: rather than
beforebuild: and was reverted in r291725. As noted previously,
depending only on headers in beforebuild: would create .ORDER errors
in some cases.
meta.autodep.mk is still used to generate Makefile.depend though via:
gendirdeps: Makefile.depend
.END: gendirdeps
This commit allows removing all of the "local dependencies" in
Makefile.depend which cuts down on churn and removes some of the
arch-dependent Makefile.depend files.
The "local dependencies" were also problematic for bootstrapping.
Sponsored by: EMC / Isilon Storage Division
FAST_DEPEND is intended to be the "skip 'make depend' and mkdep"
feature. Since DIRDEPS_BUILD does this already with some of its own
hacks, and filemon doesn't need this, and nofilemon does, teach it how
to handle each of these cases.
In meta+filemon mode filemon will handle dependencies itself via the
meta mode logic in bmake. We still want to set MK_FAST_DEPEND=yes to
enable some logic that indicates that 'make depend' is skipped in the
traditional sense. The actual .depend.* files will be skipped.
When nofilemon is set though we still need to track and generate dependencies.
Sponsored by: EMC / Isilon Storage Division
The .depend file will still be generated if _EXTRADEPEND is used. The target
is kept with a dependency on DPSRCS though so that 'make depend' will generate
all files.
Sponsored by: EMC / Isilon Storage Division
Rather than depend on .depend not existing, check the actual
.depend.OBJ file that will be used for that object. If it doesn't
exist then use the guessed dependencies.
FAST_DEPEND may never have a .depend file. Not having one means all of the
previous logic would over-depend all object files on all headers which is not
what we wanted. It also means that if a .depend is generated before a build
is done for _EXTRADEPEND (such as for PROG or LIB) then all of these
dependencies would not be used since the .depend wasn't generated from mkdep
and the real .depend.* files are not generated until the build.
Sponsored by: EMC / Isilon Storage Division
