/home/sbruno/bsd/head/sys/dev/hptrr/hptrr_osm_bsd.c:178:66: warning: for loop has empty body [-Wempty-body]
for (order=0, size=PAGE_SIZE; size<f->size; order++, size<<=1) ;
^
/home/sbruno/bsd/head/sys/dev/hptrr/hptrr_osm_bsd.c:178:66: note: put the semicolon on a separate line to silence this warning
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
vnode v_object to avoid double-buffering. Use the same object both as
the backing store for tmpfs node and as the v_object.
Besides reducing memory use up to 2x times for situation of mapping
files from tmpfs, it also makes tmpfs read and write operations copy
twice bytes less.
VM subsystem was already slightly adapted to tolerate OBJT_SWAP object
as v_object. Now the vm_object_deallocate() is modified to not
reinstantiate OBJ_ONEMAPPING flag and help the VFS to correctly handle
VV_TEXT flag on the last dereference of the tmpfs backing object.
Reviewed by: alc
Tested by: pho, bf
MFC after: 1 month
v_object of non OBJT_VNODE type.
For vm_object_page_clean(), simply do not assert that object type must
be OBJT_VNODE, and add a comment explaining how the check for
OBJ_MIGHTBEDIRTY prevents the rest of function from operating on such
objects.
For vm_mmap_vnode(), if the object type is not OBJT_VNODE, require it
to be for swap pager (or default), handle the bypass filesystems, and
correctly acquire the object reference in this case.
Reviewed by: alc
Tested by: pho, bf
MFC after: 1 week
to vnode_pager_setsize(), is either OBJT_VNODE, or, if vnode was
already reclaimed, OBJT_DEAD. Note that the later is only possible
due to some filesystems, in particular, nfsiods from nfs clients, call
vnode_pager_setsize() with unlocked vnode.
More, if the object is terminated, do not perform the resizing
operation.
Reviewed by: alc
Tested by: pho, bf
MFC after: 1 week
the file size, use VOP_GETATTR() instead of accessing vnode vm_object
un_pager.vnp.vnp_size.
Take the shared vnode lock earlier to cover the added VOP_GETATTR()
call and, as consequence, the whole internal sendfile loop. Reduce vm
object lock scope to not protect the local calculations.
Note that this is the last misuse of the vnp_size in the tree, the
others were removed from the ELF image activator by r230246.
Reviewed by: alc
Tested by: pho, bf (previous version)
MFC after: 1 week
OpenCISS states that if the value is 0, then the driver should try a value
of 31. That's just silly. Set to 17 so that the subtraction for maxio
becomes 16 and aligns nicely.
Reviewed by: scottl
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
Communication on src-commiters, Sat, 27 Apr 2013 22:09:06 -0700,
Subject was: "Re: svn commit: r249997"
As I'm here, fix the style main block comments in files' headers.
work in FreeBSD.
This is still heavily a work in progress but I'd rather it start
shipping in -HEAD sooner rather than later.
This doesn't (yet) link it into the build system either for a static
kernel or as a module; that will come later (after many, many make universe
tests.)
Remove ADA_FLAG_PACK_INVALID flag. Since ATA disks have no concept of media
change it only duplicates CAM_PERIPH_INVALID flag, so we can use last one.
Slightly cleanup DA_FLAG_PACK_INVALID use.
Give periph validity flag own periph reference. That slightly simplifies
the release logic and covers hypothetical case if lock is dropped inside
the periph_oninval() method.
If max_sg_length is 0, then we default to 16
If max_sg_length is less than CISS_MAX_SG_ELEMENTS, then
we will set round the value of max_sg_length to the nearest
power of 2 and use it to align maxio.
Else, we will use CISS_MAX_SG_ELEMENTS for our calculations.
Thanks to scottl for working me through the history and providing
the basis for this patch.
Submitted by: scott
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
requests.
sys/geom/geom_disk.h:
- Added d_delmaxsize which represents the maximum size of individual
device delete requests in bytes. This can be used by devices to
inform geom of their size limitations regarding delete operations
which are generally different from the read / write limits as data
is not usually transferred from the host to physical device.
sys/geom/geom_disk.c:
- Use new d_delmaxsize to calculate the size of chunks passed through to
the underlying strategy during deletes instead of using read / write
optimised values. This defaults to d_maxsize if unset (0).
- Moved d_maxsize default up so it can be used to default d_delmaxsize
sys/cam/ata/ata_da.c:
- Added d_delmaxsize calculations for TRIM and CFA
sys/cam/scsi/scsi_da.c:
- Added re-calculation of d_delmaxsize whenever delete_method is set.
- Added kern.cam.da.X.delete_max sysctl which allows the max size for
delete requests to be limited. This is useful in preventing timeouts
on devices who's delete methods are slow. It should be noted that
this limit is reset then the device delete method is changed and
that it can only be lowered not increased from the device max.
Reviewed by: mav
Approved by: pjd (mentor)
maximum sizes for said methods, which are used when processing BIO_DELETE
requests. This includes updating UNMAP support discovery to be based on
SBC-3 T10/1799-D Revision 31 specification.
Added ATA TRIM support to cam scsi devices via ATA Pass-Through(16)
sys/cam/scsi/scsi_da.c:
- Added ATA Data Set Management TRIM support via ATA Pass-Through(16)
as a delete_method
- Added four new probe states used to identity available methods and their
limits for the processing of BIO_DELETE commands via both UNMAP and the
new ATA TRIM commands.
- Renamed Probe states to better indicate their use
- Added delete method descriptions used when informing user of issues.
- Added automatic calculation of the optimum delete mode based on which
method presents the largest maximum request size as this is most likely
to result in the best performance.
- Added WRITE SAME max block limits
- Updated UNMAP range generation to mirror that used by ATA TRIM, this
optimises the generation of ranges and fixes a potential overflow
issue in the count when combining multiple BIO_DELETE requests
- Added output of warnings about short deletes. This should only ever
be triggered on devices that fail to correctly advertise their supported
delete modes / max sizes.
- Fixed WS16 requests being incorrectly limited to 65535 in length.
Reviewed by: mav
Approved by: pjd (mentor)
MFC after: 2 weeks
so its available for use in generic scsi code.
This is a pre-requirement for using VPD queries to determine available SCSI
delete methods within scsi_da.
Reviewed by: mav
Approved by: pjd (mentor)
MFC after: 2 weeks
commands to an ATA device attached via a SCSI control.
sys/cam/scsi/scsi_all.c:
- Added scsi_ata_identify, scsi_ata_trim
Which use ATA Pass-Through to send commands to the attached disk.
sys/cam/scsi/scsi_all.h:
- Added defines for all missing ATA Pass-Through commands values.
- Added scsi_ata_identify, scsi_ata_trim methods used in ATA TRIM
support.
- Added scsi_vpd_logical_block_prov structure used when querying for
the supported sizes UNMAP commands.
- Added scsi_vpd_block_limits structure used when querying for the
supported sizes of the UNMAP command.
Reviewed by: mav
Approved by: pjd (mentor)
MFC after: 2 weeks
size of a delete request sent to the providing device performed by g_dev_ioctl.
This allows the kernel and apps via ioctl e.g. newfs -E to request large LBA
deletes which siginificantly improves performance.
Previously this was hard coded to 65536 sectors, the new default is 262144
which doubles the throughput of deletes on commonly available SSD's.
In tests on a Intel 520 120GB FW: 400i disk it improved the delete throughput
from 1.6GB/s to over 2.6GB/s on a full disk delete such as that done via
newfs -E
For some SSD's where delete time is pretty much constant, no matter what
the request, setting this to 0 will provide significantly better throughput
e.g. Samsung 840 240GB FW DXT07B0Q @ 262144 = 79G/s, @ 0 = 2259G/s
Reviewed by: mav
Approved by: pjd (mentor)
MFC after: 2 weeks
I/O clock. Thankfully, the simple executive provies a way to querry
the proper clock that works on all models. Move to asking for the SCLK
via this interface.
This gets the serial console working after we start init and open the
console and set the divisor (which turned the output from good to
bad). I can login on the console now.
and tuned value, we would advertise the unsupported value to CAM and it would
merrily destroy the controller with way too many IO operations.
This manifests itself in a Zero Memory RAID configuration for a P410 and
possibly other controllers.
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
in the pcb. setjmp/longjmp in the kernel also used these values, so
continue to use them although their use isn't technically the pcb
register array (matching is all that's important for setjmp/longjmp in
the kernel). Finally, eliminate the old register names from regnum.h.
This is a lexical change only. The non-debug .o files have the same md5.
