getenv_xxx() functions instead of strtoq(), because the getenv_xxx()
functions include wrappers for various postfixes like G/M/K, which
strtoq() doesn't do.
the reply to ReaddirPlus when the server failed within the loop
that calls VFS_VGET(). This failure is most likely an error
return from VFS_VGET() caused by a bogus d_fileno that was
truncated to 32bits.
This patch fixes the server so that it will return directory postop
attributes for the failure. It does not fix the underlying issue caused
by d_fileno being uint32_t when a file system like ZFS generates
a fileno that is greater than 32bits.
Reported by: jpaetzel
Reviewed by: jpaetzel
MFC after: 1 month
Before iSCSI implementation CTL had no knowledge about frontend drivers,
it had only frontends, which really were ports (alike to LUNs, if comparing
to backends). But iSCSI added there ioctl() method, which does not belong
to frontend as a port, but belongs to a frontend driver.
partitions of types other than "freebsd-boot" (in particular, "efi").
This allows the removal of some nasty hacks for supporting PowerPC systems,
in particular aliasing freebsd-boot to apple-boot on APM and an IBM-specific
code on MBR.
This changes the installer to use the correct names, which also breaks a
degeneracy in the meaning of "freebsd-boot" that allows the addition
of support for some newer IBM systems that can boot from GPT in addition to
MBR. Since I have no idea how to detect which those systems are, leave
the default on IBM PPC systems as MBR for now.
console's ability to enter the debugger.... rwatson forgot to document
this when he changed it back in 2011... There is more docs to write
about this, but at least fix this for now...
Reviewed by: emaste
MFC after: 1 week
camcontrol(8) now supports a new 'persist' subcommand that allows users to
issue SCSI PERSISTENT RESERVE IN / OUT commands.
sbin/camcontrol/Makefile:
Add persist.c.
sbin/camcontrol/persist.c:
New persistent reservation support for camcontrol(8).
We have support for all known operation modes for PERSISTENT RESERVE
IN and PERSISTENT RESERVE OUT.
exceptions noted above.
sbin/camcontrol/camcontrol.8:
Document the new 'persist' subcommand.
In the section on the Transport ID (-I) option, explain what
Transport IDs for each protocol should look like. At some point
some of this information could probably get moved off in a
separate man page, either on Transport IDs alone or a man page
documenting the Transport ID parsing code.
Add a number of examples of persistent reservation commands.
Persistent Reservations are complex enough that the average user
probably won't be able to get the commands exactly right by just
reading the man page. These examples show a few basic and
advanced examples of how to use persistent reservations.
sbin/camcontrol/camcontrol.h:
Move the definition for camcontrol_optret here, so we can use it
for the persistent reservation code.
Add a definition for the new scsipersist() function.
sbin/camcontrol/camcontrol.c:
Add 'persist' to the list of subcommands.
Document 'persist' in the help text.
sys/cam/scsi/scsi_all.c:
Add the scsi_persistent_reserve_in() and
scsi_persistent_reserve_out() CCB building functions.
Add a new function, scsi_transportid_sbuf(). This takes a
SCSI Transport ID (documented in SPC-4), and prints it to
an sbuf(9). There are some transports (like ATA, USB, and
SSA) for which there is no transport defined. We need to
come up with a reasonable thing to do if we're presented
with a Transport ID that claims to be for one of those
protocols.
Add new routines scsi_get_nv() and scsi_nv_to_str().
These functions do a table lookup to go between a string and an
integer. There are lots of table lookups needed in the
persistent reservation code in camcontrol(8).
Add a new function, scsi_parse_transportid(), along with leaf node
functions to parse:
FC, 1394 and SAS (scsi_parse_transportid_64bit())
iSCSI (scsi_parse_transportid_iscsi())
SPI (scsi_parse_transportid_spi())
RDMA (scsi_parse_transportid_rdma())
PCIe (scsi_parse_transportid_sop())
Transport IDs. Given a string with the general form proto,id these
functions create a SCSI Transport ID structure.
sys/cam/scsi/scsi_all.h:
Update the various persistent reservation data structures to
SPC4r36l, but also rename some fields that were previously
obsolete with the proper names from older SCSI specs. This
allows using older, obsolete persistent reservation types when
desired.
Add function prototypes for the new persistent reservation CCB
building functions.
Add a data strucure for the READ FULL STATUS service action
of the PERSISTENT RESERVE IN command.
Add Transport ID structures for all protocols described in SPC-4.
Add a new series of SCSI_PROTO_XXX definitions, and
redefine other defines in terms of these new definitions.
Add a prototype for scsi_transportid_sbuf().
Change a couple of "obsolete" persistent reservation data
structure fields into something more meaningful, based on
what the field was called when it was defined in the spec.
(e.g. SPC, SPC-2, etc.)
Create a new define, SPRI_MAX_LEN, for the maximum allocation
length allowed for the PERSISTENT RESERVE IN command.
Add data structures and enumerations for the new name/value
translation functions.
Add data structures for SCSI over PCIe Routing IDs.
Bring the PERSISTENT RESERVE OUT Register and Move parameter list
structure (struct scsi_per_res_out_parms) up to date with SPC-4.
Add a data structure for the transport IDs that can optionally be
appended to the basic PERSISTENT RESERVE OUT parameter list.
Move SCSI protocol macro definitions out of the VPD page 0x83
definition and combine them with the more up to date protocol
definitions higher in the file.
Add function prototypes for scsi_nv_to_str(), scsi_get_nv(),
scsi_parse_transportid_64bit(), scsi_parse_transportid_spi(),
scsi_parse_transportid_rdma(), scsi_parse_transportid_iscsi(),
scsi_parse_transportid_sop(), and scsi_parse_transportid().
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
handle packets up to 1536 bytes)
This fixes the need to frag that could happen when using vlans on top of
if_arge (which is a common case for the use the switch ports as individual
NICs).
Previously to this commit any vlan setup with if_arge as parent would have
the MTU of the parent interface reduced by the size of dot1q header
(4 bytes).
Tested on TP-Link 1043ND (where the WAN port is just a switch port setup to
tag packets in a different VLAN than the LAN ports).
Reported and tested by: Harm Weites (harm at weites.com)
Update some comments on code, specifying the correct vlans used on switch
setup.
Advertise the proper switch operation mode (the rtl8366rb only support
dot1q vlans).
This fixes the breakage that i introduced on r249752 and make the rtl8366rb
switch works again with etherswitchcfg(8).
Tested on TP-Link 1043ND.
Tested by: me, Harm Weites (harm at weites.com)
6851093 system drops to kmdb with anonymous dtrace probes + kmdb
This has no effect on FreeBSD (code is ifdef'ed) but is useful as
reference for future merges.
MFC after: 1 week
The EFI framebuffer produces corrupted output on certain systems. For
now display the framebuffer parameters (address, dimensions, etc.) on
boot to aid in tracking down these issues.
Sponsored by: The FreeBSD Foundation
Mark cpu_search_lowest/cpu_search_highest/cpu_search_both as noinline,
while cpu_search() gets always_inline. With the attributes set,
cpu_search() is inlined in wrappers, and if()s with constant
conditionals are optimized.
On some tests on many-core machine, the hwpmc reported samples for
cpu_search*() are reduced from 25% total to 9%.
Submitted by: "Rang, Anton" <anton.rang@isilon.com>
MFC after: 1 week
- Don't discard frames if the dropped or error flag is set.
- Don't remove the last 4-bytes of every packet.
- Add extra range check for data position offset when receiving data.
MFC after: 1 day
PR: 191432
The array index for the callchain is getting double-incremented -- both in the
loop and the storing. It should only be incremented in one location.
Also, constrain the stack pointer range check.
MFC after: 2 weeks
requests on the trim_queue, even for the CFA ERASE. This allows us, in
the future, to collapse adjacent requests. Since CFA ERASE is only for
CF cards, and it is so restrictive in what it can do, the collapse
code is not presently here. This also brings the ada driver more in
line with the da driver's treatment of BIO_DELETEs.
Reviewed by: mav@
Don't check ZVOL_WCE flag, used in Solaris to control device "write cache".
It is not applicable on FreeBSD and by default set to "disable".
MFC after: 3 days
Both vt(4) and ofwfb(4) need a lot of love to be usable on sparc64 and even
then the performance of ofwfb(4) would suck compared to hardware accelerated
drivers like creator(4) and machfb(4).
The UEFI framebuffer driver vt_efifb requires vt(4), so add a mechanism
for the startup routine to set the preferred console. This change is
ugly because console init happens very early in the boot, making a
cleaner interface difficult. This change is intended only to facilitate
the sc(4) / vt(4) transition, and can be reverted once vt(4) is the
default.
1. oce_multiq_start(): make sure the buffer is consumed even on ENXIO
2. oce_multiq_transmit(): there is an extra call to drbr_enqueue()
causing the mbuf to be enqueued twice when the NIC's queue is full,
and potential panics
3. oce_multiq_transmit(): same problem fixed recently in ixgbe (r267187)
and other drivers: if the mbuf is enqueued, the proper return value is 0
Submitted by: Stefano Garzarella
MFC after: 3 days
These have no effect on FreeBSD, in fact they are ifdef'ed,
but make easier future merges:
6699767 panic in spec_open()
6718877 crgetzoneid() use can cause problems when forking processes with
USDT providers in a non global zone
MFC after: 3 days
into head. The code is not believed to have any effect
on the semantics of non-NFSv4.1 server behaviour.
It is a rather large merge, but I am hoping that there will
not be any regressions for the NFS server.
MFC after: 1 month
UFS rather than for all but ZFS. This code was assuming that offsets were
monotonically increasing for all file systems except ZFS and that the
cookies from a previous call may have been rewound to a block boundary.
According to mckusick@ only UFS is known to do this, so only requests against
UFS file systems should remove cookies smaller than the given offset. This
fixes serving TMPFS over NFS as it too does not have monotonically increasing
offsets. The comment around the code also indicated it was specific to UFS.
Some of the code using 'not_zfs' is specific to ZFS snapshot handling, so
add a 'is_zfs' variable for those cases.
It's possible that 'is_zfs' check for VFS_VGET() support may not be
specific to ZFS. This needs more research and testing.
After this fix TMPFS and other file systems can be served over NFS.
To test I compared the results of syncing a /usr/src tree into a tmpfs and
serving that over NFS. Before the fix 3589 files were missing on the remote
view. After the fix all files were successfully found.
Reviewed by: rmacklem
Discussed with: mckusick, rmacklem via fs@
Discussed at: http://lists.freebsd.org/pipermail/freebsd-fs/2014-April/019264.html
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
