The HDMI driver will attach a framebuffer device when a display is
connected. If the EDID can be read and contains a preferred mode, it
will be used. Otherwise the framebuffer will default to 800x600.
In addition, if the EDID contains a CEA-861 extension block and the
"basic audio" flag is set, audio playback at 48kHz 16-bit stereo is
enabled on the controller.
Reviewed by: andrew
Approved by: gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D5383
This addresses a number of race conditions that can cause crashes as a
result of unsynchronized access to the list.
PR: 206904
Tested by: Larry Rosenman <ler@lerctr.org>,
Kevin Bowling <kevin.bowling@kev009.com>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D5315
The OBJS_DEPEND_GUESS mechanism required moving the bsd.dep.mk inclusion
to after the checks, but left DEPENDFILE not-yet-set. Move it to
bsd.own.mk to resolve this.
Pointyhat to: bdrewery
Reported by: antoine (ports failures)
Sponsored by: EMC / Isilon Storage Division
- Set td_errno so that ktrace and dtrace can obtain the syscall error
number in the usual way.
- Pass negative error numbers directly to the syscall layer, as they're
not intended to be returned to userland.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5425
-fPIC has no effect on linking although it seems to be ignored by
GNU ld.bfd. However, it causes ld.lld to terminate with an invalid
argument error.
Reviewed by: dchagin, kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5444
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
This does not decode arguments to system calls but should properly
decode system call names and error return values.
Reviewed by: ed
Differential Revision: https://reviews.freebsd.org/D5412
driver. This mostly involves selecting the register offsets to use at
runtime based on the hardware we are talking to.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5327
On Pass2.0 can trigger interrupt on both timer and CQ count.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5423
This is not needed and causes revid register of the PCI
configuration space to clear on Pass2.0.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5421
Don't postpone Tx if the Tx lock can be acquired now.
This gives 3x better performance on egress.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5325
VNIC manages counters in hardware hence it is desired to have this
option enabled to avoid redundant stats update in ether_input_internal().
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5323
Support for software LRO when enabled in the capabilities
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5321
- The network controller verifies Rx TCP/UDP/SCTP checksums by default.
Communicate this to the stack when the packet is not marked as erroneous
to avoid redundant checksum calculation in kernel.
- It is not uncommon to get the mbuf with m_len that is less than
the minimal size for the IP, TCP, UDP, etc. when HW checsumming
is enabled. To avoid data corruption performed by the HW that is
intended to write IP and TCP/UDP/SCTP checksums to the data segment,
the mbuf needs to be pulled up by the required number of bytes.
- Make sure that one can modify the mbufs that require checsum calculation
rather than check for NULL mbuf on each transmission.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5320
will be needed when we bring in further support for these SoCs.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5340
In the DIOCRSETADDRS ioctl() handler we allocate a table for struct pfr_addrs,
which is processed in pfr_set_addrs(). At the users request we also provide
feedback on the deleted addresses, by storing them after the new list
('bcopy(&ad, addr + size + i, sizeof(ad));' in pfr_set_addrs()).
This means we write outside the bounds of the buffer we've just allocated.
We need to look at pfrio_size2 instead (i.e. the size the user reserved for our
feedback). That'd allow a malicious user to specify a smaller pfrio_size2 than
pfrio_size though, in which case we'd still read outside of the allocated
buffer. Instead we allocate the largest of the two values.
Reported By: Paul J Murphy <paul@inetstat.net>
PR: 207463
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D5426
For sources and destinations marked "noincr", the previous code was
incorrectly programming the dedicated DMA channel control register
using bit definitions for normal DMA channels. This code path is not
currently used, but will be used by the HDMI audio driver in review.
Reviewed by: andrew
Approved by: gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D5382
Copy the data into temprorary malloced buffer and drop the lock for
copyout.
Reported, reviewed and tested by: cem
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Given PROG1 PROG2, 'make PROG1' would work but 'make PROG1 PROG2' would not.
Just build them as normal in a sub-make to avoid any issues.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
For example when building, from buildworld, lib/atf/libatf-c++/tests/detail:
--- all_subdir_atf ---
is now:
--- all_subdir_lib/atf/libatf-c++/tests/detail ---
Sponsored by: EMC / Isilon Storage Division
