Just allow MSI interrupts to always start at the end of the I/O APIC
pins. Since existing machines already have more than 255 I/O APIC
pins, IRQ 255 is no longer reliably invalid, so just remove the
minimum starting value for MSI.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D17991
SDM rev. 068 was released yesterday and it contains the description of
the MSR 0x10a IA32_ARCH_CAP. This change adds symbolic definitions for
all bits present in the document, and decode them in the CPU
identification lines printed on boot.
But also, the document defines SSB_NO as bit 4, while FreeBSD used but
2 to detect the need to work-around Speculative Store Bypass
issue. Change code to use the bit from SDM.
Similarly, the document describes bit 3 as an indicator that L1TF
issue is not present, in particular, no L1D flush is needed on
VMENTRY. We used RDCL_NO to avoid flushing, and again I changed the
code to follow new spec from SDM.
In fact my Apollo Lake machine with latest ucode shows this:
IA32_ARCH_CAPS=0x19<RDCL_NO,SKIP_L1DFL_VME,SSB_NO>
Reviewed by: bwidawsk
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D18006
Specifically, block 0-length fragments, even when the MF bit is clear.
Also, ensure that every fragment with the MF bit clear ends at the same
offset and that no subsequently-received fragments exceed that offset.
Reviewed by: glebius, markj
MFC after: 3 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D17922
Doing so removes the dependency on proctree lock from sysctl process list
export which further reduces contention during poudriere -j 128 runs.
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17825
endpoints.
This can be used to configure several IPsec tunnels between two hosts
with different security associations.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
These SoCs have CHIPID registers, which store the Chip model, according
to the manufacturer; make use of those in order to better identify
the chip we're actually running on.
If we're unable to read the CHIPID registers for some reason we will
use the string "unknown " as a value for hw.model.
Reported by: yamori813@yahoo.co.jp
Sponsored by: Smartcom - Bulgaria AD
The CBQ BORROW flag conflicts with the RMCF_CODEL flag; the
two sets of definitions actually define the same things. The symptom
is that a kernel with CBQ support and not CODEL fails to load a QoS
policy with the obscure error "pfctl: DIOCADDALTQ: Cannot allocate memory."
If ALTQ_DEBUG is enabled, the error becomes a little clearer:
"rmc_newclass: CODEL not configured for CBQ!" is printed by the kernel.
There really shouldn't be two sets of macros that have to be defined
consistently, but the include structure isn't right for exporting
CBQ flags to altq_rmclass.h. Re-align the definitions, and add
CTASSERTs in the kernel to ensure that the definitions are consistent.
PR: 215716
Reviewed by: pkelsey
MFC after: 2 weeks
Sponsored by: Forcepoint LLC
Differential Revision: https://reviews.freebsd.org/D17758
vmem's are not just used for TLS memory in TOM and the #include actually
predates the TLS code so should not have been removed when the TLS vmem
moved in r340466.
Pointy hat to: jhb
Sponsored by: Chelsio Communications
Instead of jumping to locations which store the exact number of bytes,
use displacement to move the destination.
In particular the following clears an area between 8-16 (inclusive)
branch-free:
movq %r10,(%rdi)
movq %r10,-8(%rdi,%rcx)
For instance for rcx of 10 the second line is rdi + 10 - 8 = rdi + 2.
Writing 8 bytes starting at that offset overlaps with 6 bytes written
previously and writes 2 new, giving 10 in total.
Provides a nice win for smaller stores. Other ones are erratic depending
on the microarchitecture.
General idea taken from NetBSD (restricted use of the trick) and bionic
string functions (use for various ranges like in this patch).
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17660
The key context is always placed immediately after the work request
header. The total work request length has to be rounded up by 16
however.
MFC after: 1 month
Sponsored by: Chelsio Communications
The addresses passed when reading and writing keys are always shifted
right by 5 as the memory locations are addressed in 32-byte chunks, so
the quantum needs to be 32, not 8.
MFC after: 1 month
Sponsored by: Chelsio Communications
For some reason the proc UMA zone's ctor, dtor and init functions are
instrumented, but these functions are always available through FBT.
Moreover, the probes are not part of the original Solaris proc
provider, aren't documented, have no uses (e.g., in dwatch(8)) and
have no clear use to begin with. Therefore, remove them.
Reviewed by: rpaulo
Differential Revision: https://reviews.freebsd.org/D2169
For TOE TLS, we just want to advance the send pointer to skip over the
record just sent to the TOE. The recently added sbsndptr_adv() is
sufficient for that and is cheaper.
MFC after: 1 month
Sponsored by: Chelsio Communications
The number of MSI IRQs still defaults to 512, but it can now be
changed at boot time via the machdep.num_msi_irqs tunable.
Reviewed by: kib, royger (older version)
Reviewed by: markj
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17977
recent changes in spibus and allow the use of different SPI modes on
the same bus.
Reported by: ian
Sponsored by: Rubicon Communications, LLC (Netgate)
It's often useful to have a callback when an I/O takes more than a
threshold amount of time. This adds the infrastructure for periph
devices to register one.
One use-case is as a debugging aide when you need a semi-realtime
indication of an I/O outlier so you can trigger bus capture gear for
vendor analysis.
Sponsored by: Netflix, Inc
rather than the floor(). Returning the floor means that
sbttoX(Xtosbt(y)) != y for almost all values of y. In practice, this
results in a difference of at most 1 in the lsb of the sbintime_t.
This difference is meaningless for all current users of these
functions, but is important for the newly introduced sysctl conversion
routines which implicitly rely on the transformation being idempotent.
Sponsored by: Netflix, Inc
iflib_stop() was not resetting the rxq completion queue state variables.
This meant that for any driver that has receive completion queues, after a
reinit, iflib would start asking what's available on the rx side starting at
whatever the completion queue index was prior to the stop, instead of at 0.
Submitted by: pkelsey
Reported by: pkelsey
MFC after: 3 days
Sponsored by: Limelight Networks
The off-by-one errors in 332735 weren't actual errors and were
preventing the last MSI interrupt source from being used. Instead,
the issue is that when all MSI interrupt sources were allocated, the
loop in msix_alloc() would terminate with 'msi' still set to non-null.
The only check for 'i' overflowing was in the 'msi' == NULL case, so
msix_alloc() would try to reuse the last MSI interrupt source instead
of failing.
Fix by moving the check for all sources being in use to just after the
loop.
Reviewed by: kib, markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17976
netmap(4) support for vtnet(4) was incomplete and had multiple bugs.
This commit fixes those bugs to bring netmap on vtnet in a functional state.
Changelist:
- handle errors returned by virtqueue_enqueue() properly (they were
previously ignored)
- make sure netmap XOR rest of the kernel access each virtqueue.
- compute the number of netmap slots for TX and RX separately, according to
whether indirect descriptors are used or not for a given virtqueue.
- make sure sglist are freed according to their type (mbufs or netmap
buffers)
- add support for mulitiqueue and netmap host (aka sw) rings.
- intercept VQ interrupts directly instead of intercepting them in txq_eof
and rxq_eof. This simplifies the code and makes it easier to make sure
taskqueues are not running for a VQ while it is in netmap mode.
- implement vntet_netmap_config() to cope with changes in the number of queues.
Reviewed by: bryanv
Approved by: gnn (mentor)
MFC after: 3 days
Sponsored by: Sunny Valley Networks
Differential Revision: https://reviews.freebsd.org/D17916
Ensure that any time CSUM_IP_TSO or CSUM_IP6_TSO is set that the corresponding
CSUM_IP6?_TCP / CSUM_IP flags are also set.
Rather than requireing drivers to bake-in an understanding that TSO implies
checksum offloads, make it explicit.
This change requires us to move the IFLIB_NEED_ZERO_CSUM implementation to
ensure it's zeroed for TSO.
Reported by: Jacob Keller <jacob.e.keller@intel.com>
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17801
r333502 removed initialization of ifc_nhwtxqs, and it's not clear
there's a need to copy it into the struct iflib_ctx at all. Use
ctx->ifc_sctx->isc_ntxqs instead.
Further, iflib_stop() did not clear the last ring in the case where
isc_nfl != isc_nrxqs (such as when IFLIB_HAS_RXCQ is set). Use
ctx->ifc_sctx->isc_nrxqs here instead of isc_nfl.
Reported by: pkelsey
Reviewed by: pkelsey
MFC after: 3 days
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D17979
The d_off field has been added to the dirent structure recently.
Currently filesystems don't support this feature. Support has been
added and tested for zfs, ufs, ext2fs, fdescfs, msdosfs and unionfs.
A stub implementation is available for cd9660, nandfs, udf and
pseudofs but hasn't been tested.
Motivation for this feature: our usecase is for a userspace nfs server
(nfs-ganesha) with zfs. At the moment we cache direntry offsets by
calling lseek once per entry, with this patch we can get the offset
directly from getdirentries(2) calls which provides a significant
speedup.
Submitted by: Jack Halford <jack@gandi.net>
Reviewed by: mckusick, pfg, rmacklem (previous versions)
Sponsored by: Gandi.net
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17917
Update the AMD family 17h temperature reporting based on AMD Tech Doc 56255
OSRR, section 4.2.1.
For CPUS w/CUR_TEMP_RANGE_SEL set, scale the reported temperature into the
range -49..206; i.e., subtract 49°C.
Submitted by: gallatin@
Reported by: bcran@
Reviewed by: me (long ago)
MFC after: 22.57 seconds
Relnotes: yea
Differential Revision: https://reviews.freebsd.org/D16855
As reported, tested, and patch supplied by Johannes.
There may be future work to do to support multiple sensors, but for now, any
sensor at all is a strict improvement for Ryzen 2 systems.
PR: 228480
Submitted by: Johannes Lundberg <johalun0 AT gmail.com> (earlier version)
Reported by: deischen@, Johannes, and numerous others
MFC after: 3.72 days
Allow the location of capabilities.conf to be configured.
Also allow a per-abi syscall prefix to be configured with the
abi_func_prefix syscalls.conf variable and check syscalls against
entries in capabilities.conf with and without the prefix amended.
Take advantage of these two features to allow use shared capabilities.conf
between the default syscall vector and the freebsd32 compatability
layer. We've been inconsistent about keeping the two in sync as
evidenced by the bugs fixed in r340294. This eliminates that problem
going forward.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17932
This was for pre-7.0 CAM support. Neither the CAM nor the busdma
changes over the years have not been ifdef'd. The code cannot build
on 6.x anymore. Support for 6.4 ended in 2010, so remove them.
mutexes but now are converted to epoch(9) use thread-private epoch_tracker.
Embedding tracker into ifnet(9) or ifnet derived structures creates a non
reentrable function, that will fail miserably if called simultaneously from
two different contexts.
A thread private tracker will provide a single tracker that would allow to
call these functions safely. It doesn't allow nested call, but this is not
expected from compatibility KPIs.
Reviewed by: markj
