draft-manning-dsua-01.txt.
Stop using public addresses as samples and use the recommended
192.0.2.0/24 netblock that has specifically been set aside for
documentation purposes.
Reviewed by: readers of freebsd-security did not respond to a request
for review
o Fix entry for Megahertz XJ4336-CC4336. Old config (sio1) seems
conflict with IrDA port or COM port on some laptop and sometimes
totally hang up after insertion.
o Add 'NTT DoCoMo Mobile D Card 96P1' which is used by many
people in Japan.
Reviewed by: imp
that it does not reset the printer when opened. This fixes the problem
of printing a document almost till the end and then resetting the
printer when the next print job is started.
Submitted by: Christopher Masto <chris@netmonger.net>
Also, remove all but the ums0 device from the fixit target 'to save
precious i-nodes on the fixit floppy'.
o Make sure every entry has a logger event on insert/delete
o Make sure that the order of loggers is consistant
o Add D-Link DEF-650
o use /sbin/ifconfig consistantly
o Add Elecom Laneed LD-CDE, NTT DoCoMo Paldio 321S and 341S
(from shige@FreeBSD.org)
We were supposed to get these in far earlier and didn't, hence
the commit after feature freeze. A promise is a promise. :)
Submitted by: Sascha Schumann <sascha@schumann.cx>
Changes are:
- rpc.umntall is called at the right places now in /etc/rc*
- rpc.umntall timeout has been lowered from two days (too high) to one
- verbose messages in rpc.umntall have been clarified
- kill double entries in /var/db/mounttab when rpc.umntall is invoked
- ${early_nfs_mounts} has been removed from /etc/rc
- patched mount(8) -p to print different pass/dump values for ufs filesystems.
(last patch recieved from dan <bugg@bugg.strangled.net>)
Submitted by: Martin Blapp <mbr@imp.ch>, dan <bugg@bugg.strangled.net>
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.
Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
PC Card (PCMPC100). the entry was one character
short...the final ")" was missing.
Pointed out by: Chris D. Faulhaber - jedgar@fxp.org - jedgar@FreeBSD.org
of the SOA 'minimum' field. Now it's necessary to define $TTL seperately
to shut it up. Bind does reasonable things by default but it's annoying
still.
PR: 15834
Submitted by: Daniel Lewart <d-lewart@uiuc.edu>
in the 3.x branch. Also remove the dependency on /usr to find the
boot address/interface.
Mostly-submitted-abd-tested-by: MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>
Improve the internal mknod() to understand being passed an (optional)
user:group specification.
Don't apply root:wheel to nodes explicitly anywhere, it's the default.
Remove an odd looking uucp:wheel assignment, as it's inconsistent with
all the other tty?? devices.
5in HD 2 heads, 77 cylinders, 8 sectors/track, 1024 bytes/sector
5/3.5in DD 2 heads, 80 cylinders, 8 sectors/track, 512 bytes/sector
Meanings of the rogrammer-readeble fd name were explained by Brian
Fundakowski Feldman and Peter Wemm in hackers list and NOKUBI
Hirotaka.
Reviewed by: nyan
Fixed some style bugs for cam (superflous umask and missing newline).
Fixed bogons for apm. The pattern "apm*" matched too many things; apm
and apmctl were both made twice by `MAKEDEV all'. Hopefully no one
depends on `MAKEDEV apm0' making apm or on `MAKEDEV apm' making apmctl.
more comprehensive. Previously, at least colour changes were not
applied to all virtual consoles.
PR: 15066
Reported by: Andy Farkas <andyf@speednet.com.au>
Submitted by: yokota
The current offical Sendmail Inc. version uses /var/mail/ and when we upgrade
our repository to that version, we will get the change. It is best to make
the path change in 4.0-R (which may not have the latest Sendmail Inc. version,
than to change in mid-4.x stream when we may upgrade.
Ok'ed by: Peter (quite a while ago)
The current offical Sendmail Inc. version uses /var/mail/ and when we upgrade
our repository to that version, we will get the change. It is best to make
the path change in 4.0-R (which may not have the latest Sendmail Inc. version,
than to change in mid-4.x stream when we may upgrade.
Ok'ed by: Peter (quite a while ago)
MAKEDEV can now run (with /sbin/chown and /bin/chgrp, still) without
any /usr. The default PATH for MAKEDEV is now "/sbin:/bin" to prevent
against further spammage of /usr programs in MAKEDEV. In the event
of an emergency, the variable "MAKEDEVPATH" can be used to replace
PATH, but I don't know what that emergency could be.
Let me know if you have any problems. I've tested it as well as
I could, which basically means everything except for RocketPorts.
Reviewed in principle by: peter
longer really suitable as a default to create the various /dev nodes
to be contained on the fixit floppy, since all our proud new devide
nodes finally made the fixit floppy run over...
So instead create a new target titled `fixit' which creates just the
dev nodes for a single unit per each default driver; whoever needs
more of them is free to create whatever he needs, perhaps after
killing unused nodes before. There were more than 700 /dev nodes on
the floppy before that action, and it's still around 350 now. I doubt
all the various /dev/ugen* entries are really useful on such a tool,
so people, please check, and if you feel like more could be eliminated
from that floppy, kill'em.
While i was at it, removed traces of ft(8) that still survived even
though the driver has long since been dead.
That's step #1. #2 will follow...
