Use C99 designators to set the value of each slot and the nitems macro to
check for valid entries. In the process, switch to indexing by signal
number rather than signal-1 for improved clarity.
Obtained from: CheriBSD (a6053c5abf03a5f53bbfcdd3a26429383f67e09f)
Sponsored by: DARPA, AFRL
Reviewed by: kib
Since negative entries are managed with a LRU list, a hit requires a
modificaton.
Currently the code tries to upgrade the global lock if needed and is
forced to retry the lookup if it fails.
Provide a dedicated lock for use when the cache is only shared-locked.
Reviewed by: kib
MFC after: 1 week
getdtablesize is "trivial global state" and is similar to
getrlimit(RLIMIT_NOFILE), so should be permitted in capability mode.
Reviewed by: oshogbo
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7719
Calling cap_rights_contains() several times with the same inputs is not
going to produce a different output. The variable being iterated, i, is
never used inside the for loop.
The loop is actually done in cap_rights_contains()
Submitted by: Ryan Moeller <ryan@freqlabs.com>
Reviewed by: oshogbo, ed
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7369
Add a new 'clear driver' command for devctl along with the accompanying
ioctl and devctl_clear_driver() library routine to reset a device to
use a wildcard devclass instead of a fixed devclass. This can be used
to undo a previous 'set driver' command. After the device's name has
been reset to permit wildcard names, it is reprobed so that it can
attach to newly-available (to it) device drivers.
MFC after: 1 month
Sponsored by: Chelsio Communications
obliterate possible error from sleep with errors from
umtxq_check_susp(), when looping to clear URWLOCK_{READ,WRITE}_WAITERS.
Noted and reviewed by: vangyzen
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
If there was some error, e.g. the sleep was interrupted, as in the
referenced PR, do_rw_rdlock() did not cleared URWLOCK_READ_WAITERS.
Since unlock only wakes up write waiters when there is no read
waiters, for URWLOCK_PREFER_READER kind of locks, the result was
missed wakeups for writers.
In particular, the most visible victims are ld-elf.so locks in
processes which loaded libthr, because rtld locks are urwlocks in
prefer-reader mode. Normal rwlocks fall into prefer-reader mode only
if thread already owns rw lock in read mode, which is not typical and
correspondingly less visible. In the PR, unowned rtld bind lock was
waited for in the process where only one thread was left alive.
Note that do_rw_wrlock() correctly clears URWLOCK_WRITE_WAITERS in
case of errors.
Reported and tested by: longwitz@incore.de
PR: 211947
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
syscons spinlock for the output routine alone. It is better to extend
the coverage of the first syscons spinlock added in r162285. 2 locks
might work with complicated juggling, but no juggling was done. What
the 2 locks actually did was to cover some of the missing locking in
each other and deadlock less often against each other than a single
lock with larger coverage would against itself. Races are preferable
to deadlocks here, but 2 locks are still worse since they are harder
to understand and fix.
Prefer deadlocks to races and merge the second lock into the first one.
Extend the scope of the spinlocking to all of sc_cnputc() instead of
just the sc_puts() part. This further prefers deadlocks to races.
Extend the kdb_active hack from sc_puts() internals for the second lock
to all spinlocking. This reduces deadlocks much more than the other
changes increases them. The s/p,10* test in ddb gets much further now.
Hide this detail in the SC_VIDEO_LOCK() macro. Add namespace pollution
in 1 nested #include and reduce namespace pollution in other nested
#includes to pay for this.
Move the first lock higher in the witness order. The second lock was
unnaturally low and the first lock was unnaturally high. The second
lock had to be above "sleepq chain" and/or "callout" to avoid spurious
LORs for visual bells in sc_puts(). Other console driver locks are
already even higher (but not adjacent like they should be) except when
they are missing from the table. Audio bells also benefit from the
syscons lock being high so that audio mutexes have chance of being
lower. Otherwise, console drviver locks should be as low as possible.
Non-spurious LORs now occur if the bell code calls printf() or is
interrupted (perhaps by an NMI) and the interrupt handler calls
printf(). Previous commits turned off many bells in console i/o but
missed ones done by the teken layer.
(NB: This was likely a mismerge from XNU in audit support, where the
text argument to setlogin(2) is captured -- but as a text token,
whereas this change uses the dedicated login-name field in struct
audit_record.)
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
ftruncate(2) system call. This was not required by the Common
Criteria, which needed only open-time audit.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Such processes are stopped synchronously by a direct call to
ptracestop(SIGTRAP) upon exec. P2_PTRACE_FSTP causes the exec()ing thread
to suspend itself while waiting for a SIGSTOP that never arrives.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7576
- Read interrupt properties at bus enumeration time and store
it into global mapping table.
- At bus_activate_resource() time, given mapping entry is resolved and
connected to real interrupt source. A copy of mapping entry is attached
to given resource.
- At bus_setup_intr() time, mapping entry stored in resource is used
for delivery of requested interrupt configuration.
- For MSI/MSIX interrupts, mapping entry is created within
pci_alloc_msi()/pci_alloc_msix() call.
- For legacy PCI interrupts, mapping entry must be created within
pcib_route_interrupt() by pcib driver itself.
Reviewed by: nwhitehorn, andrew
Differential Revision: https://reviews.freebsd.org/D7493
aio_aqueue() calls aio_init_aioinfo() as the first action. There is no
need to duplicate the code in kern_aio_fsync().
Also fix indent for aio_aqueue() definition.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D7523
Right now, userspace (fast) gettimeofday(2) on x86 only works for
RDTSC. For older machines, like Core2, where RDTSC is not C2/C3
invariant, and which fall to HPET hardware, this means that the call
has both the penalty of the syscall and of the uncached hw behind the
QPI or PCIe connection to the sought bridge. Nothing can me done
against the access latency, but the syscall overhead can be removed.
System already provides mappable /dev/hpetX devices, which gives
straight access to the HPET registers page.
Add yet another algorithm to the x86 'vdso' timehands. Libc is updated
to handle both RDTSC and HPET. For HPET, the index of the hpet device
to mmap is passed from kernel to userspace, index might be changed and
libc invalidates its mapping as needed.
Remove cpu_fill_vdso_timehands() KPI, instead require that
timecounters which can be used from userspace, to provide
tc_fill_vdso_timehands{,32}() methods. Merge i386 and amd64
libc/<arch>/sys/__vdso_gettc.c into one source file in the new
libc/x86/sys location. __vdso_gettc() internal interface is changed
to move timecounter algorithm detection into the MD code.
Measurements show that RDTSC even with the syscall overhead is faster
than userspace HPET access. But still, userspace HPET is three-four
times faster than syscall HPET on several Core2 and SandyBridge
machines.
Tested by: Howard Su <howard0su@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D7473
it (either async or sync drain).
At this moment the only user of drain is TCP, but TCP wouldn't reschedule a
callout after it has drained it, since it drains only when a tcpcb is closed.
This for now the problem isn't observed.
Submitted by: rrs
Make the kern_fsync() function public, so that it can be used by other
parts of the kernel. Fix up existing consumers to make use of it.
Requested by: kib
If the caller of sem_post() wakes up a thread sleeping via sem_wait()
before it clears the has_waiters flag, the caller of sem_wait() has no way of
knowing when it is safe to destroy the semaphore and reuse the memory. This is
because the caller of sem_post() may be interrupted between the wake step and
the clearing of has_waiters. It will then write into the has_waiters flag in
userspace after being preempted for some unknown amount of time.
Reviewed by: jhb, kib, vangyzen
Approved by: kib (mentor), vangyzen (mentor)
MFC after: 2 weeks
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D7505
Standard VOP_FSYNC() implementation just syncs data buffers, and due
to this, is the correct and efficient implementation for msdosfs or
any other filesystem which uses bufer cache trivially. Provide
globally visible wrapper vop_stdfdatasync_buf() for future consumption
by other filesystems.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7471
The syscall is a trivial wrapper around new VOP_FDATASYNC(), sharing
code with fsync(2). For all filesystems, this commit provides the
implementation which delegates the work of VOP_FDATASYNC() to
VOP_FSYNC(). This is functionally correct but not efficient.
This is not yet POSIX-compliant implementation, because it does not
ensure that queued AIO requests are completed before returning.
Reviewed by: mckusick
Discussed with: avg (ZFS), jhb (AIO part)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7471
It was remarkably hard to trace all current threads. "show pcpu" only
showed the pid, and there was nothing (?) better than searching ps output
to find the tids on CPUs. This change simplifies the search, but you
still have to trace the tid for each CPU manually.
incorrect from the error cases in exec_map_first_page(). They are
unnecessary because we automatically unbusy the page in vm_page_free()
when we remove it from the object. The calls are incorrect because they
happen after the page is freed, so we might actually unbusy the page
after it has been reallocated to a different object. (This error was
introduced in r292373.)
Reviewed by: kib
MFC after: 1 week
- Move group task queue into kern/subr_gtaskqueue.c
- Change intr_enable to return an int so it can be detected if it's not
implemented
- Allow different TX/RX queues per set to be different sizes
- Don't split up TX mbufs before transmit
- Allow a completion queue for TX as well as RX
- Pass the RX budget to isc_rxd_available() to allow an earlier return
and avoid multiple calls
Submitted by: shurd
Reviewed by: gallatin
Approved by: scottl
Differential Revision: https://reviews.freebsd.org/D7393
It was added in r153192 for XFS and doesn't appear to have been used for
anything else. XFS was disconnected in r241607 and removed entirely in
r247631.
Reported by: mlaier
Reviewed by: imp, kib
Differential Revision: https://reviews.freebsd.org/D7468
