Check that the -g argument is actually a number, if not report an error.
This argument is converted without checking with atoi(3) later so without this
check it converts any alpha entries into 0 meaning it deletes the group wheel
Add a regression test about it
PR: 90114
Reported by: bkoenig@cs.tu-berlin.de
MFC after: 1 week
The user was perperly adding the to different groups from "list" but was not
removed from the other groups it could have belong to.
While here add a regression test about this bug
PR: 185666
Reported by: sub.mesa@gmail.com
MFC after: 1 week
This fixes problems with passing strings that look like numbers to clauses
that expect strings; previously it caused syntax errors and had to be worked
by user, using quotes. The workaround introduced in r267833 is no longer
neccessary.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
FreeBSD:11:amd64 instead of freebsd:11:x86:64) when bootstrapping pkg.
Thanks to portmgr for providing symlinks so both styles work.
Reviewed by: bapt
MFC after: 3 weeks
the -d argument should be passed before -p, -s, -P or -S to be taken in account
Differential Revision: https://reviews.freebsd.org/D1011
Reviewed by: adrian, gnn
MFC after: 1 week
This reduces variability during timer calibration by keeping the emulation
"close" to the guest. Additionally having all timer emulations in the kernel
will ease the transition to a per-VM clock source (as opposed to using the
host's uptime keep track of time).
Discussed with: grehan
This makes ctld(8) register its iSCSI targets and portals on configured
iSNS servers to allow initiators find them without active discovery.
Fetching of allowed initiators from iSNS is not implemented now, so target
ACLs still should be configured manually.
Reviewed by: trasz@
MFC after: 1 month
Sponsored by: iXsystems, Inc.
To restore the default font using vidcontrol(1), use the "-f" flag
without an argument:
vidcontrol -f < /dev/ttyv0
PR: 193910
Differential Revision: https://reviews.freebsd.org/D971
Submitted by: Marcin Cieslak <saper@saper.info>
Reviewed by: ray@, emaste@
Approved by: ray@
MFC after: 1 week
an error if the argument to pciconf -a doesn't have a unit number, rather
than triggering an assertion failure.
PR: 194506
Reported by: Anthony Cornehl <accornehl@gmail.com>
Sponsored by: EMC / Isilon Storage Division
bhyve doesn't emulate the MSRs needed to support this feature at this time.
Don't expose any model-specific RAS and performance monitoring features in
cpuid leaf 80000007H.
Emulate a few more MSRs for AMD: TSEG base address, TSEG address mask and
BIOS signature and P-state related MSRs.
This eliminates all the unimplemented MSRs accessed by Linux/x86_64 kernels
2.6.32, 3.10.0 and 3.17.0.
PxCMD.ST from '1' to '0' and back. This allows the driver a chance to
recover if for instance a timeout occurred due to activity on the
host.
Reviewed by: grehan
emulating a large number of MSRs.
Ignore writes to a couple more AMD-specific MSRs and return 0 on read.
This further reduces the unimplemented MSRs accessed by a Linux guest on boot.
CPUID.80000001H:ECX.
Handle accesses to PerfCtrX and PerfEvtSelX MSRs by ignoring writes and
returning 0 on reads.
This further reduces the number of unimplemented MSRs hit by a Linux guest
during boot.
This gets rid of the "TSC doesn't count with P0 frequency!" message when
booting a Linux guest.
Tested on an "AMD Opteron 6320" courtesy of Ben Perrault.
have wildcards. This makes it possible for autofs(4) to avoid requesting
automountd(8) action on access to nonexistent nodes - unless wildcards
are actually used.
Note that this change breaks ABI for automountd(8).
Tested by: dhw@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
prevent fatal conflict should one-true-awk ever be replaced -- e.g., in
an appliance -- with GNU awk. NB: Renamed my implementation to _asorti()
MFC after: 3 days
X-MFC-to: stable/10, stable/9
This allows us to use libevent for other application in the future.
For now libevent is still INTERNALLIB and no shared library is installed.
MFC after: 1 month
Make this subcommand less FC-specific, reporting target and port addresses
in more generic way. Also make it report list of connected initiators in
unified way, working for both FC and iSCSI, and potentially others.
MFC after: 1 week
options to display some key VMCB fields.
The set of valid options that can be passed to bhyvectl now depends on the
processor type. AMD-specific options are identified by a "--vmcb" or "--avic"
in the option name. Intel-specific options are identified by a "--vmcs" in
the option name.
Submitted by: Anish Gupta (akgupt3@gmail.com)
Such LUNs will be visible to initiators, but return "not ready" status
on media access commands. If backing storage become available later,
`ctladm modify ...` or `service ctld reload` can trigger its reopen.
values. Therefore the bit width of the "PM Timer Block" was actually being
interpreted as 50-bits instead of the expected 32-bit.
This eliminates an error message emitted by a Linux 3.17 guest during boot:
"Invalid length for FADT/PmTimerBlock: 50, using default 32"
Reviewed by: grehan
MFC after: 1 week
This gets rid of the following error message during FreeBSD guest bootup:
"vtbd0: hard error cmd=flush fsbn 0"
Reported by: rodrigc
Reviewed by: grehan
configuration value is an integer count of seconds, it is not a timeval.
Using memcpy() to copy a timeval from it put garbage into the tv_usec
field.
PR: 194025
Submitted by: David Shane Holden <dpejesh@yahoo.com>
MFC after: 1 week
The new IASL from the recent acpi-ca import will error out
if it doesn't see these new fields, which were previously
reserved.
Reported by: lme
Reviewed by: neel
while here:
+ Fix an issue when extracting small archives where dialog_mixedgauge was
not rendering; leaving the user wondering if anything happened.
+ Add #ifdef's to assuage compilation against older libarchive
NB: Minimize diff between branches; make merging easier.
+ Add missing calls to end_dialog(3)
+ Change string processing from strtok(3) to strcspn(3) (O(1) optimization)
+ Use EXIT_SUCCESS and EXIT_FAILURE instead of 0/1
+ Optimize getenv(3) use, using stored results instead of calling repeatedly
NB: Fixes copy/paste error wherein we display getenv(BSDINSTALL_DISTDIR) in
an error msgbox when chdir(2) to getenv(BSDINSTALL_CHROOT) fails
(wrong variable displayed in msgbox).
+ Use strtol(3) instead of [deprecated] atoi(3)
+ Add additional error checking (e.g., check return of archive_read_new(3))
+ Assign DECONST strings to static variables
+ Fix typo in distextract.c error message (s/Could could/Could not/)
+ Add comments and make a minor whitespace adjustment
Reviewed by: nwhitehorn, julian
Use adequately sized buffer for error(s) (512 -> PATH_MAX + 512).
Fix the following style(9) nits while here:
- distfetch.c uses PATH_MAX while distextract.c uses MAXPATHLEN;
standardize on one (PATH_MAX)
- Move $FreeBSD$ from comment to __FBSDID()
- Sort included headers (alphabetically, sys/* at top)
- Add missing header includes (e.g., <stdlib.h> for getenv(3),
calloc(3)/malloc(3)/free(3), and atoi(3); <string.h> for strdup(3),
strrchr(3), strsep(3), and strcmp(3); <ctype.h> for isspace(3); and
<unistd.h> for chdir(2), etc.)
- Remove rogue newline at end of distfetch.c
- Don't declare variables in if-, while-, or other statement
NB: To prevent masking of prior declarations atop function
- Perform stack alignment for variable declarations
- Add missing function prototype for count_files() in distextract.c
- Break out single-line multivariable-declarations
NB: Aligning similarly-named variables with one-char difference(s)
NB: Minimizes diffs and makes future diffs more clear
- Use err(3) family of functions (requires s/int err;/int retval;/g)
Reviewed by: nwhitehorn, julian
ZFS property canmount=off so that /var/db/pkg and other such directories
are part of the / dataset, and only /var/mail, /var/log, and /var/crash
are excluded from the ZFS boot environment (beadm).
PR: 193971
Approved by: jmg
MFC after: ASAP
Relnotes: yes
Sponsored by: ScaleEngine Inc.
made automountd(8) mix them up: trying to access the second one would
trigger mount for the first one.
foo host:/foo
foobar host:/foobar
PR: 193584
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The mixed little/big-endianness of SMBIOS UUIDs was clarified in v2.6
of the SMBIOS spec. dmidecode uses the reported version of SMBIOS to
determine the layout and what to byte-swap.
bhyve's SMBIOS reported as 2.4 though it implemented the 2.6-style of
memory layout. This resulted in dmidecode reporting a different
UUID than one passed in via the -U option.
Fix by exporting a version of 2.6.
Reviewed by: tychon
Reported by: julian
MFC after: 1 day
code. There are only a handful of MSRs common between the two so there isn't
too much duplicate functionality.
The VT-x code has the following types of MSRs:
- MSRs that are unconditionally saved/restored on every guest/host context
switch (e.g., MSR_GSBASE).
- MSRs that are restored to guest values on entry to vmx_run() and saved
before returning. This is an optimization for MSRs that are not used in
host kernel context (e.g., MSR_KGSBASE).
- MSRs that are emulated and every access by the guest causes a trap into
the hypervisor (e.g., MSR_IA32_MISC_ENABLE).
Reviewed by: grehan
reload also if that size was not specified in the new configuration.
Previously it happened only if size was explicitly changed in config.
MFC after: 3 days
Makefiles should not assume that source files can be overwritten. This is the
common case for Perforce source trees.
This is a followup commit to r211243 in the same vein.
MFC after: 1 month
Sponsored by: Spectra Logic
MFSpectraBSD: r1036319 on 2014/01/29, r1046711 on 2014/03/06
the minimum image size specified is always less than the maximum
image size. If makefs(1) is invoked specifying minimum image size,
but not maximum one, the program exits with an error. Example:
# sudo -E makefs -M 538968064 -B be /home/davide/disk.img $DESTDIR
makefs: `/home/davide/tftproot/mips' minsize of 538968064 rounded up
to ffs bsize of 8192 exceeds maxsize 0. Lower bsize, or round the
minimum and maximum sizes to bsize.
Assert then that minsize < maxsize iff maxsize is specified.
This change allows me to build MIPS images using makefs(1) and following
what specified in the wiki again.
Reviewed by: jmallett, ngie
VM-exit and ultimately on whether nRIP is valid. This allows us to update
the %rip after the emulation is finished so any exceptions triggered during
the emulation will point to the right instruction.
Don't attempt to handle INS/OUTS VM-exits unless the DecodeAssist capability
is available. The effective segment field in EXITINFO1 is not valid without
this capability.
Add VM_EXITCODE_SVM to flag SVM VM-exits that cannot be handled. Provide the
VMCB fields exitinfo1 and exitinfo2 as collateral to help with debugging.
Provide a SVM VM-exit handler to dump the exitcode, exitinfo1 and exitinfo2
fields in bhyve(8).
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Reviewed by: grehan
reality. In particular, draw a connection between the auto ZFS script and
the auto UFS one, since they fulfill similar functions. I'm not sure the
auto ZFS code is actually experimental anymore, so it might be worth
changing that label still.
It allows to bypass range checks between UNMAP and READ/WRITE commands,
which may introduce additional delays while waiting for UNMAP parameters.
READ and WRITE commands are always processed in safe order since their
range checks are almost free.
many thanks for their continued support of FreeBSD.
While I'm there, also implement a new build knob, WITHOUT_HYPERV to
disable building and installing of the HyperV utilities when necessary.
The HyperV utilities are only built for i386 and amd64 targets.
This is a stable/10 candidate for inclusion with 10.1-RELEASE.
Submitted by: Wei Hu <weh microsoft com>
MFC after: 1 week
if we got a Login Response PDU without the "T" bit set, try again with
an empty request. This fixes interoperability with COMSTAR.
Reviewed by: mav@
Tested by: mav@
MFC after: 1 week
merge(1), which is part of the RCS package, it must not be installed if
WITHOUT_RCS update is set. Otherwise, it will produce confusing errors.
CR: https://reviews.freebsd.org/D691
MFC after: 1 week
Sponsored by: Spectra Logic
NetBSD's virtio-net implementation doesn't negotiate
the merged rx-buffers feature. To support this, check
to see if the feature was negotiated, and then adjust
the operation of the receive path accordingly by using
a larger iovec, and a smaller rx header.
In addition, ignore writes to the (read-only) status byte.
Tested with NetBSD/amd64 5.2.2, 6.1.4 and 7-beta.
Reviewed by: neel, tychon
Phabric: D745
MFC after: 3 days
when the initiator skips security negotiation. This fixes interoperability
with Xtend SAN initiator.
PR: 193021
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Note that this is a workaround, not a proper solution. If you know
lex well, and want to help - please let me know, I'll explain how it
should work.
PR: 192968
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
used prior to f_dialog_init() -- e.g., in a script that sets
DIALOG_SELF_INITIALIZE to NULL, preventing f_dialog_init() from being run
automaticaly when `dialog.subr' is included. Caused by sub-shell processing
of arguments inheriting prior value of $OPTIND, used by getopts. Solved by
unsetting OPTIND prior to [re-]processing of positional arguments.
While there, add a NO_WTHREAD_SAFETY flag that can be used to disable
this specific warning flag. Disable it for auditdistd. We can easily
patch up auditdistd to have the right annotations to build, but as
auditdistd is intended to be portable across other operating systems,
it's not worth the effort.
Approved by: brueffer@
packets at all. Swapping byte order on SOCK_RAW was actually a bug, an
artifact from the BSD network stack, that used to convert a packet to
native byte order once it is received by kernel.
Other operating systems didn't follow this, and later other BSD
descendants fixed this, leaving us alone with the bug. Now it is
clear that we should fix the bug.
In collaboration with: Olivier Cochard-Labbé <olivier cochard.me>
See also: https://wiki.freebsd.org/SOCK_RAW
Sponsored by: Nginx, Inc.
in the emulation of the task switch. If any exceptions are triggered then the
guest %rip should point to instruction that caused the task switch as opposed
to the one after it.
Also, add a missing LIBPANEL dependency for lldb
Approved by: rpaulo (mentor)
Suggested by: brooks
MFC after: 5 days
Phabric: D675 (as part of a larger diff)
PR: 192762
The executable itself doesn't contain any privileged information.
An example of where this is useful is when makefs(8) is creating an image
that includes /sbin/shutdown. This can now be done without root privileges.
Reviewed by: delphij
Discussed with: delphij, des
CR: https://reviews.freebsd.org/D662
Sometimes nmount(2) will fail without setting errmsg. The previous (ignored)
error would then be shown as the reason for the failed call if the next
nmount(2) also fails without [ENOENT,ENOTSUP].
An example is when there is a tmpfs mounted with -o size. vfs_filteropt() adds
'size' as an error in errmsg due to 'size' not being in tmpfs_updateopts. Then
tmpfs_mount returns [ENOTSUP] from nmount(2), which is then ignored. The next
call may race with an unmount causing an invalid [EINVAL] that then does log an
error, with the tmpfs errmsg.
The race itself is a separate issue to fix as it is expected to have an
[ENOENT] returned instead.
In this example the mount being shown is actually nullfs, not tmpfs that the
error is from.
mountd[740]: can't delete exports for /poudriere/data/.m/exp-head-commit-test-devel/04/.npkg: Invalid argument mount option <size> is unknown
It should only show:
mountd[740]: can't delete exports for /poudriere/data/.m/exp-head-commit-test-devel/04/.npkg: Invalid argument
MFC after: 2 weeks
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
UNIX systems, eg. MacOS X and Solaris. It uses Sun-compatible map format,
has proper kernel support, and LDAP integration.
There are still a few outstanding problems; they will be fixed shortly.
Reviewed by: allanjude@, emaste@, kib@, wblock@ (earlier versions)
Phabric: D523
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
