wpa_supplicant expects that it has exclusive access to the net80211 state so
when its starts poking in the WEP/WPA settings and the card is already
scanning it can cause net80211 to try and associate incorrectly with a
protected AP.
This is an inconvenience for firmware based cards such as iwi where it can be
sent an auth instruction with incomplete security info and cause a firmware
error.
Remove the 'ifconfig up' from network.subr since wpa_supplicant will
immediately down the interface again.
Reported by: Guy Helmer (and others)
Reviewed by: sam, brooks, avatar
MFC after: 3 days
all ports/UPDATING entries that affect one of the installed ports,
and are relevant on the given machine.
PR: bin/117564
Submitted by: Beat Gaetzi <beat@chruetertee.ch>
MFC after: 14 days
nfsd(8), in mountd(8), and in rpc.statd(8)
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, rpc.lockd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, rpc.lockd will automatically add 127.0.0.1 and
if IPv6 is enabled, ::1 to the list.
PR: bin/98500
MFC after: 1 week
and in mountd(8)
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, rpc.statd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, rpc.statd will automatically add 127.0.0.1 and if
IPv6 is enabled, ::1 to the list.
(coming for rpc.lockd too)
PR: bin/98500
MFC after: 1 week
caused a segfault. It turns out that in pre-7.0 systems if you do
getenv("amd_enable=YES") it will return the setting of the environment
variable "amd_enable" but now it returns NULL. I think I found the
places where sysinstall was potentially relying on that old behavior.
Fix is to make a copy of the string to be used for the getenv(3) call,
look for a '=' character in it, and replace it with '\0' if one is
found. Stuck to sysinstall's typical coding standards despite urges
to do otherwise.
PR: 117642
MFC after: 2 days
argv[1] to mimic crt0 behaviour. Do the job by a direct assignment
to __progname in order to stay compatible with NetBSD, whose
setprogname() is a deliberate no-op.
The reason for this change is that some programs (usually those
imported from NetBSD) use getprogname() to distinguish between their
aliases. (See pkill aka pgrep for example.)
This change can be useful, and applicable, to NetBSD, too.
pkg_version tried to open instead of just "INDEX" to make the actual
problem more clear (e.g. missing INDEX-8).
MFC after: 3 days
Reviewed by: portmgr (pav)
own line. We made this change in traceroute(8) some time ago. This
is particularly useful when you are not resolving hostnames since ip6
addresses can be quite long, and lines wrap fairly easily in the
multi-path router case.
Discussed with: bz
MFC after: 1 month
-h bindip
Specify specific IP addresses to bind to for TCP and UDP requests.
This option may be specified multiple times. If no -h option is
specified, mountd will bind to INADDR_ANY. Note that when specifying
IP addresses with -h, mountd will automatically add 127.0.0.1 and if
IPv6 is enabled, ::1 to the list.
PR: bin/114097
Reviewed by: pjd (an eariler version of the patch)
MFC after: 1 week
This commit includes the following core components:
* sample configuration file for sensorsd
* rc(8) script and glue code for sensorsd(8)
* sysctl(3) doc fixes for CTL_HW tree
* sysctl(3) documentation for hardware sensors
* sysctl(8) documentation for hardware sensors
* support for the sensor structure for sysctl(8)
* rc.conf(5) documentation for starting sensorsd(8)
* sensor_attach(9) et al documentation
* /sys/kern/kern_sensors.c
o sensor_attach(9) API for drivers to register ksensors
o sensor_task_register(9) API for the update task
o sysctl(3) glue code
o hw.sensors shadow tree for sysctl(8) internal magic
* <sys/sensors.h>
* HW_SENSORS definition for <sys/sysctl.h>
* sensors display for systat(1), including documentation
* sensorsd(8) and all applicable documentation
The userland part of the framework is entirely source-code
compatible with OpenBSD 4.1, 4.2 and -current as of today.
All sensor readings can be viewed with `sysctl hw.sensors`,
monitored in semi-realtime with `systat -sensors` and also
logged with `sensorsd`.
Submitted by: Constantine A. Murenin <cnst@FreeBSD.org>
Sponsored by: Google Summer of Code 2007 (GSoC2007/cnst-sensors)
Mentored by: syrinx
Tested by: many
OKed by: kensmith
Obtained from: OpenBSD (parts)
gets cleaned up upon receiving SIGINT. This un-breaks subsequent
executions of ipfwpcap and helps when debugging network/divert
issues like this:
ipfwpcap -r 6000 - | tcpdump -r -
MFC after: 1 week
with identical meaning as the colon ":". This is to support a syntax
that is more similar to a PCI device specification in the device hints
file. The selector is not fully compatible with the specification in
the hints file, since entries in that file use a different prefix,
which needs to be added to the getsel() routine, if full support of
that syntax is found to be desirable.
Approved by: re (Ken Smith)
PCI selectors with 2 or 3 elements behave exactly as before (i.e. the
domain is 0 and in the 2 element case, the function is also 0).
The form with 4 selector elements works as in the previous revision
and provides the PCI domain number as the left-most selector element.
This change allows old scripts (which used the 2 or 3 selector element
formats) to be kept. Without this patch, the 3 element form was parsed
as starting with a domain number (and the function was assumed to be 0),
with this patch, the domain is assumed to be 0 (and the last value is
used as the function number).
The man page is updated to describe the new selector semantics.
Approved by: re (Ken Smith)
the threading libraries is built. This simplifies the
logic in makefiles that need to check if the pthreads
support is present. It also fixes a bug where we would
build a threading library that we shouldn't have built:
for example, building with WITHOUT_LIBTHR and the default
value of DEFAULT_THREADING_LIB (libthr) would mistakenly
build the libthr library, but not install it.
Approved by: re (kensmith)
