There is no point in hiding, e.g. pmc.xscale(3) from a developer running
on amd64, when the target arch in question will probably never have
manual pages installed at all.
Reviewed by: sbruno, hiren
The pipe2() function is similar to pipe() but allows setting FD_CLOEXEC and
O_NONBLOCK (on both sides) as part of the function.
If p points to two writable ints, pipe2(p, 0) is equivalent to pipe(p).
If the pointer is not valid, behaviour differs: pipe2() writes into the
array from the kernel like socketpair() does, while pipe() writes into the
array from an architecture-specific assembler wrapper.
Reviewed by: kan, kib
The accept4() function, compared to accept(), allows setting the new file
descriptor atomically close-on-exec and explicitly controlling the
non-blocking status on the new socket. (Note that the latter point means
that accept() is not equivalent to any form of accept4().)
The linuxulator's accept4 implementation leaves a race window where the new
file descriptor is not close-on-exec because it calls sys_accept(). This
implementation leaves no such race window (by using falloc() flags). The
linuxulator could be fixed and simplified by using the new code.
Like accept(), accept4() is async-signal-safe, a cancellation point and
permitted in capability mode.
that the method is not supported, return an empty string.
This looks more handy for callers like procstat(1), which will not
abort after the failed call and still output some useful information.
MFC after: 3 weeks
!defined(LIBRARIES_ONLY) so it is only created once on architectures
with 32-bit compat support.
Replace ln -fhs with ${INSTALL_SYMLINK} to the link is logged in the
METALOG.
is a bit obfuscated here, as ia64 adds string source files elsewhere, so
simply exclude it here.
Reviewed by: imp
MFC after: 3 days
Sponsored by: DARPA, AFRL
Trim two now-unneeded (and likely harmful) lines from the libstand
setjmp/longjmp for MIPS.
Spotted by: jmallett
MFC after: 3 days
Sponsored by: DARPA, AFRL
Clang only supports atomic operations for ARMv6. For non-ARMv6, we still
need to emit these functions.
Clang's prototype for these functions slightly differs, as it is truly
based on GCC's documentation. It requires the use of signed types, but
also requires varargs. Still, we are not allowed to simply implement
this function directly. Cleverly work around this by implementing it
under a different name and using __strong_reference().
These APIs were relevant when memory for virtual machine allocation was
hard partitioned away from the rest of the system but that is no longer
the case. The sysctls that provided this information were garbage collected
a while back.
Obtained from: NetApp
There are no getdtablesize() bounds on the file descriptor to be duplicated;
it only has to be open. If the RLIMIT_NOFILE rlimit was decreased after
opening the file descriptor, it may be greater than or equal to
getdtablesize() but still valid.
MFC after: 1 week
Originally we disabled libcompiler-rt on MIPS and SPARC64, because of an
issue where __clzdi2 and __ctzdi2 would cause endless recursion. This
bug has been fixed in r230021 already, but for some reason we only
switched to libcompiler-rt on SPARC64 -- not MIPS.
This means we can finally use <stdatomic.h> on all our architectures.
This compiler flag enforces that that people either mark variables
static or use an external declarations for the variable, similar to how
-Wmissing-prototypes works for functions.
Due to the fact that Yacc/Lex generate code that cannot trivially be
changed to not warn because of this (lots of yy* variables), add a
NO_WMISSING_VARIABLE_DECLARATIONS that can be used to turn off this
specific compiler warning.
Announced on: toolchain@
The functions utx_active_add(), utx_active_remove(), utx_lastlogin_add() and
utx_log_add() set errno to 0 if they are successful. This not only violates
POSIX if pututxline() is successful, but may also overwrite a valid error
with 0 if, for example, utx_lastlogin_add() fails while utx_log_add()
succeeds.
Reviewed by: ed
signal.
- Fix the old ksem implementation for POSIX semaphores to not restart
sem_wait() or sem_timedwait() if interrupted by a signal.
MFC after: 1 week
and 64-bit MIPS. Don't use the floating-point coprocessor in the libstand
context for MIPS.
Reviewed by: imp
MFC after: 3 days
Sponsored by: DARPA, AFRL
/usr/lib/include ==> /usr/include
This fixes -print-file-name=include in clang (and is
arguably a better way to fix the same issue in GCC than
the change I made in r231336).
MFC after: 1 week
upcoming 3.3 release (branching and freezing expected in a few weeks).
Preliminary release notes can be found at the usual location:
<http://llvm.org/docs/ReleaseNotes.html>
An MFC is planned once the actual 3.3 release is finished.
extattr_set_{fd,file,link} is logically a write(2)-like operation and
should return ssize_t, just like extattr_get_*. Also, the user-space
utility was using an int for the return value of extattr_get_* and
extattr_list_*, both of which return an ssize_t.
MFC after: 1 week
Words in shell script are separated by spaces or tabs independent of the
value of IFS. The value of IFS is only relevant for the result of
substitutions. Therefore, there should be a space between 'wordexp' and the
words to be expanded, not an IFS character.
Paranoia might dictate that the shell ignore IFS from the environment (even
though our sh currently uses it), so do not depend on it in the new test
case.
0x3C: /* Per Intel document 325462-045US 01/2013. */
Add manpage to document all the goodness that is available in this
processor model.
Submitted by: hiren panchasara <hiren.panchasara@gmail.com>
Reviewed by: jimharris, sbruno
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
Removed the check for regex.h in configure in order
to disable regex syntax checking, as it exposes
BIND to a critical flaw in libregex on some
platforms. [RT #32688]
Security: CVE-2013-2266
Approved by: delphij (mentor)
Sponsored by: DK Hostmaster A/S
While almost nobody uses O_ASYNC, and rightly so, the inheritance of the
related properties across accept() is a portability issue like the
inheritance of O_NONBLOCK.
on signed integer overflow wrapping. Otherwise mktime(3) and timegm(3)
can hang, in case the timestamp passed in struct tm is not representable
in a time_t. Specifically, any timestamp after 2038-01-19 03:14:07, in
combination with a 32-bit time_t.
Note that it would be better to change the code to not rely on undefined
behaviour, but it is contributed code, and it is not entirely trivial to
fix the issue properly.
MFC after: 3 days
Update libarchive to 3.1.2
Some of new features:
- support for lrzip and grzip compression
- support for writing tar v7 format
- b64encode and uuencode filters
- support for __MACOSX directory in Zip archives
- support for lzop compresion (external utility)
u_long. Before this change it was of type int for syscalls, but prototypes
in sys/stat.h and documentation for chflags(2) and fchflags(2) (but not
for lchflags(2)) stated that it was u_long. Now some related functions
use u_long type for flags (strtofflags(3), fflagstostr(3)).
- Make path argument of type 'const char *' for consistency.
Discussed on: arch
Sponsored by: The FreeBSD Foundation
This change allows creating file descriptors with close-on-exec set in some
situations. SOCK_CLOEXEC and SOCK_NONBLOCK can be OR'ed in socket() and
socketpair()'s type parameter, and MSG_CMSG_CLOEXEC to recvmsg() makes file
descriptors (SCM_RIGHTS) atomically close-on-exec.
The numerical values for SOCK_CLOEXEC and SOCK_NONBLOCK are as in NetBSD.
MSG_CMSG_CLOEXEC is the first free bit for MSG_*.
The SOCK_* flags are not passed to MAC because this may cause incorrect
failures and can be done later via fcntl() anyway. On the other hand, audit
is expected to cope with the new flags.
For MSG_CMSG_CLOEXEC, unp_externalize() is extended to take a flags
argument.
Reviewed by: kib
command line option "-m <memsize in MB>" to specify the memory size.
Prior to this change the user needed to explicitly specify the amount of
memory allocated below 4G (-m <lowmem>) and the amount above 4G (-M <highmem>).
The "-M" option is no longer supported by 'bhyveload' and 'bhyve'.
The start of the PCI hole is fixed at 3GB and cannot be directly changed
using command line options. However it is still possible to change this in
special circumstances via the 'vm_set_lowmem_limit()' API provided by
libvmmapi.
Submitted by: Dinakar Medavaram (initial version)
Reviewed by: grehan
Obtained from: NetApp
multibyte support[0] and the new functions strenvisx and strsenvisx.
Add MLINKS for vis(3) functions add by this and the initial import from
NetBSD[1].
PR: bin/166364, bin/175418
Submitted by: "J.R. Oldroyd" <fbsd@opal.com>[0]
stefanf[1]
Obtained from: NetBSD
MFC after: 2 weeks
EAGAIN/EWOULDBLOCK when another daemon was running and had the pidfile open.
We should return EEXIST in that case, fix it.
Reported by: Dirk Engling <erdgeist@erdgeist.org>
Reviewed by: jhb, Dirk Engling <erdgeist@erdgeist.org>
MFC after: 1 week
It is almost always a bug if nscd closes the connection unexpectedly but
programs should not be killed with SIGPIPE for it.
Reviewed by: bushman
Tested by: Jan Beich
MFC after: 1 week
- Fix a compile warning where the return value of a call
to a write() function was ignored.
- Remove redundant include files from userland USB header files.
- Add some now needed include files to various C-files.
userland can reply to a message with NGM_HASREPLY bit set. In this case
we should not wait for a response to a responce.
PR: 176771
Submitted by: Keith Reynolds <keith.reynolds tidalscale.com>
LibYAML is a YAML 1.1 parser and emitter under MIT license which will
soon be used by the pkg boostrap (usr.bin/pkg) and bhyve
Reviewed by: roberto, antoine
int bindat(int fd, int s, const struct sockaddr *addr, socklen_t addrlen);
int connectat(int fd, int s, const struct sockaddr *name, socklen_t namelen);
which allow to bind and connect respectively to a UNIX domain socket with a
path relative to the directory associated with the given file descriptor 'fd'.
- Add manual pages for the new syscalls.
- Make the new syscalls available for processes in capability mode sandbox.
- Add capability rights CAP_BINDAT and CAP_CONNECTAT that has to be present on
the directory descriptor for the syscalls to work.
- Update audit(4) to support those two new syscalls and to handle path
in sockaddr_un structure relative to the given directory descriptor.
- Update procstat(1) to recognize the new capability rights.
- Document the new capability rights in cap_rights_limit(2).
Sponsored by: The FreeBSD Foundation
Discussed with: rwatson, jilles, kib, des
- Capability is no longer separate descriptor type. Now every descriptor
has set of its own capability rights.
- The cap_new(2) system call is left, but it is no longer documented and
should not be used in new code.
- The new syscall cap_rights_limit(2) should be used instead of
cap_new(2), which limits capability rights of the given descriptor
without creating a new one.
- The cap_getrights(2) syscall is renamed to cap_rights_get(2).
- If CAP_IOCTL capability right is present we can further reduce allowed
ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed
ioctls can be retrived with cap_ioctls_get(2) syscall.
- If CAP_FCNTL capability right is present we can further reduce fcntls
that can be used with the new cap_fcntls_limit(2) syscall and retrive
them with cap_fcntls_get(2).
- To support ioctl and fcntl white-listing the filedesc structure was
heavly modified.
- The audit subsystem, kdump and procstat tools were updated to
recognize new syscalls.
- Capability rights were revised and eventhough I tried hard to provide
backward API and ABI compatibility there are some incompatible changes
that are described in detail below:
CAP_CREATE old behaviour:
- Allow for openat(2)+O_CREAT.
- Allow for linkat(2).
- Allow for symlinkat(2).
CAP_CREATE new behaviour:
- Allow for openat(2)+O_CREAT.
Added CAP_LINKAT:
- Allow for linkat(2). ABI: Reuses CAP_RMDIR bit.
- Allow to be target for renameat(2).
Added CAP_SYMLINKAT:
- Allow for symlinkat(2).
Removed CAP_DELETE. Old behaviour:
- Allow for unlinkat(2) when removing non-directory object.
- Allow to be source for renameat(2).
Removed CAP_RMDIR. Old behaviour:
- Allow for unlinkat(2) when removing directory.
Added CAP_RENAMEAT:
- Required for source directory for the renameat(2) syscall.
Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR):
- Allow for unlinkat(2) on any object.
- Required if target of renameat(2) exists and will be removed by this
call.
Removed CAP_MAPEXEC.
CAP_MMAP old behaviour:
- Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and
PROT_WRITE.
CAP_MMAP new behaviour:
- Allow for mmap(2)+PROT_NONE.
Added CAP_MMAP_R:
- Allow for mmap(PROT_READ).
Added CAP_MMAP_W:
- Allow for mmap(PROT_WRITE).
Added CAP_MMAP_X:
- Allow for mmap(PROT_EXEC).
Added CAP_MMAP_RW:
- Allow for mmap(PROT_READ | PROT_WRITE).
Added CAP_MMAP_RX:
- Allow for mmap(PROT_READ | PROT_EXEC).
Added CAP_MMAP_WX:
- Allow for mmap(PROT_WRITE | PROT_EXEC).
Added CAP_MMAP_RWX:
- Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC).
Renamed CAP_MKDIR to CAP_MKDIRAT.
Renamed CAP_MKFIFO to CAP_MKFIFOAT.
Renamed CAP_MKNODE to CAP_MKNODEAT.
CAP_READ old behaviour:
- Allow pread(2).
- Disallow read(2), readv(2) (if there is no CAP_SEEK).
CAP_READ new behaviour:
- Allow read(2), readv(2).
- Disallow pread(2) (CAP_SEEK was also required).
CAP_WRITE old behaviour:
- Allow pwrite(2).
- Disallow write(2), writev(2) (if there is no CAP_SEEK).
CAP_WRITE new behaviour:
- Allow write(2), writev(2).
- Disallow pwrite(2) (CAP_SEEK was also required).
Added convinient defines:
#define CAP_PREAD (CAP_SEEK | CAP_READ)
#define CAP_PWRITE (CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ)
#define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL)
#define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W)
#define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X)
#define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X)
#define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X)
#define CAP_RECV CAP_READ
#define CAP_SEND CAP_WRITE
#define CAP_SOCK_CLIENT \
(CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \
CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN)
#define CAP_SOCK_SERVER \
(CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \
CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \
CAP_SETSOCKOPT | CAP_SHUTDOWN)
Added defines for backward API compatibility:
#define CAP_MAPEXEC CAP_MMAP_X
#define CAP_DELETE CAP_UNLINKAT
#define CAP_MKDIR CAP_MKDIRAT
#define CAP_RMDIR CAP_UNLINKAT
#define CAP_MKFIFO CAP_MKFIFOAT
#define CAP_MKNOD CAP_MKNODAT
#define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER)
Sponsored by: The FreeBSD Foundation
Reviewed by: Christoph Mallon <christoph.mallon@gmx.de>
Many aspects discussed with: rwatson, benl, jonathan
ABI compatibility discussed with: kib
system call, which has a nice property - it never fails, so it is a bit
easier to use. If there is no support for capability mode in the kernel
the function will return false (not in a sandbox). If the kernel is compiled
with the support for capability mode, the function will return true or false
depending if the calling process is in the capability mode sandbox or not
respectively.
Sponsored by: The FreeBSD Foundation
routines provide write-only stdio FILE objects that store their data in a
dynamically allocated buffer. They are a string builder interface somewhat
akin to a completely dynamic sbuf.
Reviewed by: bde, jilles (earlier versions)
MFC after: 1 month
* Reopen the directory using openat(fd, ".", ...) instead of opening the
pathname again. This fixes a race condition where the meaning of the
pathname changes and allows a reopen with fdopendir().
* Always reopen the directory for union stacks, not only when DTF_REWIND
is passed. Applications should be able to fchdir(dirfd(dir)) and
*at(dirfd(dir), ...). DTF_REWIND now does nothing.
sections and indirectly change the layout of an ELF file when
ELF_F_LAYOUT is not set.
PR: bin/167103
Approved by: rstone (co-mentor)
Obtained from: elftoolchain
MFC after: 2 weeks
example from bsearch(3) too, so that we don't have to duplicate
the example code in both places.
PR: docs/176197
Reviewed by: stefanf
Approved by: remko (mentor), gjb (mentor)
MFC after: 1 week
- Remove unused #include.
- Do not cast away const.
- Use the canonical idiom to compare two numbers.
- Use proper type for sizes, i.e. size_t instead of int.
- Correct indentation.
- Simplify printf("\n") to puts("").
- Use return instead of exit() in main().
Submitted by: Christoph Mallon, christoph.mallon at gmx.de
Approved by: gjb (mentor)
Reviewed by: stefanf
MFC after: 1 week
qsort(3) can work together to sort an array of integers.
PR: docs/176197
Submitted by: Fernando, fapesteguia at opensistemas.com
Approved by: gjb (mentor)
MFC after: 1 week
a section of type SHT_NULL.
- Update the man page to reflect the fact that elf_getdata() and
elf_rawdata() may return with an error of ELF_E_SECTION.
PR: bin/175491
Approved by: emaste (co-mentor)
MFC after: 1 week
now disables read-ahead. It used to effectively restore the system default
readahead hueristic if it had been changed; a negative value now restores
the default.
Reviewed by: kib
