final image.
Fix duplicated mkimg(1) call in vm_create_disk().
Add primitive (untested) PowerPC/PowerPC64 VM image
support.
Note: As it is currently written, the /boot/pmbr and
/boot/{gptboot,boot1.hfs} use the build host and not
the target build. Fixing this is likely going to be
a hack in itself.
Sponsored by: The FreeBSD Foundation
There may be some very sharp edges here while refactoring.
- Move amd64/mk-vmimage.sh -> scripts/mk-vmimage.sh.
- Remove vm-base target from Makefile.vm.
- In vm-image target, use getopts flags for argument passing.
- Create tools/vmimage.subr, containing default and prototype
for the following functions that are used to drive the build,
run in this order:
vm_install_base()
vm_extra_install_base()
vm_extra_install_packages()
vm_extra_install_ports()
vm_extra_enable_services()
vm_extra_pre_umount()
vm_create_disk()
vm_extra_create_disk()
- In tools/azure.conf, override:
vm_extra_install_base()
vm_extra_pre_umount()
vm_extra_create_disk()
- In tools/openstack.conf, override:
vm_extra_install_base()
vm_extra_pre_umount()
Sponsored by: The FreeBSD Foundation
openstack images as part of the release build.
This mimics the way Microsoft Azure images are
built, with the addition of installing the
net/cloud-init package and adding a (commented)
rc.conf(5) entry for cloudinit.
Sponsored by: The FreeBSD Foundation
VM images by default.
When WITH_CLOUDWARE is not empty, add CLOUDTARGETS
to the release/Makefile 'release' target.
CLOUDTARGETS is generated from the contents of
CLOUDWARE, which should be a list of all supported
target providers.
Sponsored by: The FreeBSD Foundation
installation ISOs:
- TYPE, BRANCH, and REVISION are only defined if
OSRELEASE is not defined, so in situations where
one might set OSRELEASE for an in-house ISO build,
VOLUME_LABEL would be empty.
- makefs(8) limits the volume label to 32 characters,
which for the powerpc64 case, OSRELEASE expands to
FreeBSD-11.0-CURRENT-powerpc-powerpc64. Even with
removing the prefixing 'FreeBSD-', the string is 30
characters long, leaving zero room for suffixing the
type of ISO media (BO for bootonly, CD for cdrom, and
DVD for dvdrom).
Resolve these by defining VOLUME_LABEL when defining
OSRELEASE if unset. If OSRELEASE is defined by the
builder, use the OSRELEASE from that definition as the
VOLUME_LABEL.
In addition, for cases where both TARGET and TARGET_ARCH
are used for the VOLUME_LABEL, use TARGET_ARCH if it
differs from TARGET.
There are probably a few sharp edges here yet, but these
problems are going to affect the powerpc/powerpc64 builds
for 10.1-RELEASE, so the immediate concern is fixing the
underlying problem at hand quickly, and less so about the
elegance of the fix.
MFC after: 3 days
X-MFC-10.1: yes, asap
Sponsored by: The FreeBSD Foundation
r273076, r273077, r273079, r273095:
r273076:
Add a separate make(1) target to release/Makefile to
build FreeBSD virtual machine disk images for use on
the Microsoft Azure service.
For now, this target is not directly connected to the
build, however can be manually invoked.
The 'vm-azure' target invokes {amd64,i386}/mk-azure.sh,
which does the heavy lifting to produce proper VHDs.
mk-azure.sh uses a configuration file, defaulting to
tools/azure.conf if otherwise unset.
r273077:
Clear VM_RC_LIST.
r273079:
Fix signal list to trigger umount(8).
r273095:
Output an informational message when mkimg(1) runs, so it
does not appear that the process has stopped while waiting
for a 'y/n' response when waagent is deprovisioned.
Tested on: releng/10.1@r272876
MFC after: 3 days
X-MFC-10.1: yes
Sponsored by: The FreeBSD Foundation
r272436, r272437, r272792:
r272436:
Remove the first argument to panic(), which was initially
intended to be the exit code, however when a non-zero exit
code was returned to release/Makefile, this would prevent
any remaining (and possibly successful) stages from being
attempted.
r272437:
If the vm-base target fails, prevent the vm-image target
from being run since it cannot possibly succeed.
r272792:
Add /usr/local/bin and /usr/local/sbin to PATH, needed
if third-party software needs to use utilities outside
of the base system during post-install stages (indexinfo
is one culprit).
MFC after: 3 days
X-MFC-10.1: yes
Sponsored by: The FreeBSD Foundation
build FreeBSD virtual machine disk images for use on
the Microsoft Azure service.
For now, this target is not directly connected to the
build, however can be manually invoked.
The 'vm-azure' target invokes {amd64,i386}/mk-azure.sh,
which does the heavy lifting to produce proper VHDs.
mk-azure.sh uses a configuration file, defaulting to
tools/azure.conf if otherwise unset.
Sponsored by: The FreeBSD Foundation
Remove implementation of vm_prebuild_setup(),
vm_setup(), and vm_postbuild_setup().
It does not scale well, and I am not happy with
their implementation.
Sponsored by: The FreeBSD Foundation
- vm_prebuild_setup():
Steps to run prior to creating the file-backed
disk image.
- vm_setup():
Steps to run while the file-backed disk image
is mounted.
- vm_postbuild_setup():
Steps to run after the file-backed disk image
is dismounted.
The intention is to override as necessary via build
configuration files, as needed.
Sponsored by: The FreeBSD Foundation
if third-party software needs to use utilities outside
of the base system during post-install stages (indexinfo
is one culprit).
Sponsored by: The FreeBSD Foundation
intended to be the exit code, however when a non-zero exit
code was returned to release/Makefile, this would prevent
any remaining (and possibly successful) stages from being
attempted.
Sponsored by: The FreeBSD Foundation
r272234, r272236, r272262, r272264, r272269, r272271, r272272,
r272277, r272279, r272376, r272380, r272381, r272392, r272234,
r272412:
r272234:
Initial commit to include virtual machine images as part
of the FreeBSD release builds.
This adds a make(1) environment variable requirement,
WITH_VMIMAGES, which triggers the virtual machine image
targets when not defined to an empty value.
Relevant user-driven variables include:
o VMFORMATS: The virtual machine image formats to create.
Valid formats are provided by running 'mkimg --formats'
o VMSIZE: The size of the resulting virtual machine
image. Typical compression is roughly 140Mb, regardless
of the target size (10GB, 15GB, 20GB, 40GB sizes have been
tested with the same result).
o VMBASE: The prefix of the virtual machine disk images.
The VMBASE make(1) environment variable is suffixed with
each format in VMFORMATS for each individual disk image, as
well as '.img' for the source UFS filesystem passed to
mkimg(1).
This also includes a new script, mk-vmimage.sh, based on how
the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
were created (mk-vmimage.sh in ^/user/gjb/thermite/).
With the order in which the stages need to occur, as well as
sanity-checking error cases, it makes much more sense to
execute a shell script called from make(1), using env(1) to
set specific parameters for the target image than it does to
do this in make(1) directly.
r272236:
Use VMBASE in place of a hard-coded filename in the CLEANFILES
list.
r272262:
Remove a 'set -x' that snuck in during testing.
r272264:
release/Makefile:
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
r272269:
release/Makefile:
Include .OBJDIR in DESTDIR in the vm-base target.
release/release.sh:
Provide the full path to mddev.
r272271:
Fix UFS label for the root filesystem.
r272272:
Remove comments left in accidentally while testing, so the
VM /etc/fstab is actually created.
r272277:
Remove the UFS label from the root filesystem since it is added
by mkimg(1) as a gpt label, consistent with the fstab(5) entry.
r272279:
Comment cleanup in panic() message when mkimg(1) does not support
the requested disk image format.
r272376:
Separate release/scripts/mk-vmimage.sh to machine-specific
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
r272380:
Avoid using env(1) to set values passed to mk-vmimage.sh,
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
r272381:
After evaluating WITH_VMIMAGES is non-empty, ensure
the mk-vmimage.sh script exists before running it.
r272392:
Add WITH_COMPRESSED_VMIMAGES variable, which when set enables
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
r272412:
Document the new 'vm-image' target, and associated release.conf
variables.
r272413:
Remove two stray comments added during the initial iterations
of testing, no longer needed.
MFC after: 5 days
X-MFC-10.1: yes
Tested on: r272269, r272272, r272279, r272380, r272392
Sponsored by: The FreeBSD Foundation
xz(1) compression of the virtual machine images.
This is intentionally separate to allow more fine-grained
tuning over which images are compressed, especially in cases
where compressing 20GB sparse images can take hours.
Sponsored by: The FreeBSD Foundation
and instead pass the values as arguments to the script,
making it easier to run this by hand, without 'make release'.
Add usage_vm_base() and usage_vm_image() usage helpers.
Sponsored by: The FreeBSD Foundation
scripts, making it possible to mimic the functionality for
non-x86 targets.
Move echo output if MAKEFLAGS is empty outside of usage().
Remove TARGET/TARGET_ARCH evaluation.
Sponsored by: The FreeBSD Foundation
Connect the virtual machine image build to the release
target if WITH_VMIMAGES is set to a non-empty value.
release/release.sh:
Add WITH_VMIMAGES to RELEASE_RMAKEFLAGS.
release/release.conf.sample:
Add commented entries for tuning the release build if the
WITH_VMIMAGES make(1) environment variable is set to
a non-empty value.
Sponsored by: The FreeBSD Foundation
of the FreeBSD release builds.
This adds a make(1) environment variable requirement,
WITH_VMIMAGES, which triggers the virtual machine image
targets when not defined to an empty value.
Relevant user-driven variables include:
o VMFORMATS: The virtual machine image formats to create.
Valid formats are provided by running 'mkimg --formats'
o VMSIZE: The size of the resulting virtual machine
image. Typical compression is roughly 140Mb, regardless
of the target size (10GB, 15GB, 20GB, 40GB sizes have been
tested with the same result).
o VMBASE: The prefix of the virtual machine disk images.
The VMBASE make(1) environment variable is suffixed with
each format in VMFORMATS for each individual disk image, as
well as '.img' for the source UFS filesystem passed to
mkimg(1).
This also includes a new script, mk-vmimage.sh, based on how
the VM images for 10.0-RELEASE, 9.3-RELEASE, and 10.1-RELEASE
were created (mk-vmimage.sh in ^/user/gjb/thermite/).
With the order in which the stages need to occur, as well as
sanity-checking error cases, it makes much more sense to
execute a shell script called from make(1), using env(1) to
set specific parameters for the target image than it does to
do this in make(1) directly.
Sponsored by: The FreeBSD Foundation
a symlink to All/pkg-*.txz in the Latest/ directory.
This allows 'pkg bootstrap' to work out-of-box if
the REPOS_DIR environment is properly set.
Tested on: stable/10@r271848
MFC after: 3 days
X-MFC-10.1: yes
Sponsored by: The FreeBSD Foundation
added to the footer of the release/doc/ pages by
moving a hard-coded value (that is subject to human
error to change) to release.ent where other values
are regularly changed, and adding parsing logic to
release.xsl.
Approved by: re (implicit)
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
ports to prevent ports build failures from killing the
release build.
MFC after: 3 days
X-MFC-with: r270417, r270418
Sponsored by: The FreeBSD Foundation
where the target is not valid (stable/10), instead of doing
per-branch evaluation on if xdev-links needs to be invoked.
Sponsored by: The FreeBSD Foundation
r269549, r269551, r269552, r269553, r269554, r269555, r269558, r269559,
r269560, r269561, r269628, r269629, r269630, r269635, r269637:
r269549:
Create a new project branch, release-noxdev, for
a sandbox workspace outside of head/ to update the
release bits for arm builds since the deprecation of
the XDEV and XDEV_ARCH make(1) variables.
r269551:
Define load_chroot_env() and load_target_env()
prototypes.
r269552:
Call load_chroot_env() and load_target_env() where
they can be mutually conflicting with regard to
TARGET, TARGET_ARCH, XDEV, and XDEV_ARCH.
r269553:
Add shebang line to arm/*.conf files since these
should be considered to be executable (albeit not
on their own) shell scripts.
r269554:
Redefine load_chroot_env() and load_target_env() in
the arm/*.conf files, and reindent.
r269555:
Simplify where load_chroot_env() and load_target_env() are
called.
r269558:
Provide example in release.conf.sample for overriding the
load_chroot_env() and load_target_env() prototypes.
r269559:
Remove a gratuitous newline.
r269560:
Unset potentially conflicting variables in load_chroot_env()
and load_target_env().
r269561:
Make global variables global, and accessible outside of
the functions within which they were once defined.
r269628:
Remove XDEV/XDEV_ARCH evaluation if EMBEDDEDBUILD is set.
r269629:
In arm/release.sh, switch TARGET/TARGET_ARCH back to the
original XDEV/XDEV_ARCH make(1) variables.
In theory, this should have been a no-op, but the TARGET and
TARGET_ARCH are now unset in load_target_env() to avoid
collision with the chroot userland.
r269630:
Export variables in the arm/*.conf files because they
need to be passed through release.sh to arm/release.sh.
Set MK_TESTS=no for the xdev target.
r269635:
As part of the XDEV/XDEV_ARCH deprecation, the
'xdev-links' target was intentionally no longer
invoked automatically.
Invoke the xdev-links target after xdev, which
creates, for example, /usr/bin/armv6-freebsd-cc
symlink to /usr/armv6-freebsd/usr/bin/cc.
r269637:
Set TARGET and TARGET_ARCH to the XDEV and XDEV_ARCH
counterparts for the xdev and xdev-links make(1)
targets.
Sponsored by: The FreeBSD Foundation
continuing to use the variables in the configuration
file, but switch XDEV= and XDEV_ARCH= to TARGET= and
TARGET_ARCH= appropriately.
Sponsored by: The FreeBSD Foundation
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
example, explicitly hard-code gcc(1) as the compiler.
Partially revert r264703, which did a post-chroot install
of gcc(1). This was initially removed because gcc(1) fails
to build usr.bin/dtc/ causing the xdev target to fail. So
this time, move the gcc(1) installation after xdev is built.
This change is likely applicable to stable/10 arm build
failures, as well.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
r262491, r262493, r262516, r267345, r267397:
r262491:
Add DEBUG_DISTRIBUTIONS, and set it to include base and
EXTRA_DISTRIBUTIONS, excluding 'doc', since the documentation
distribution does not have corresponding debug information.
Use DEBUG_DISTRIBUTIONS in the 'distributeworld installworld'
and 'packageworld' targets, to reduce the number of occurances
of excluding distributions that do not have .debug files.
r262493:
In release/Makefile, explicitly set WITHOUT_DEBUG_FILES=1
for dvdrom and cdrom targets. (Later reverted.)
Exclude the *.debug.txz distributions from dvdrom and
cdrom images, but include them for ftp distribution.
r262516:
Rename ${dist}.debug.txz to ${dist}-dbg.txz to prevent the
following output:
eval: ${base....}: Bad substitution
eval: ${doc....}: Bad substitution
eval: ${games....}: Bad substitution
eval: ${lib32....}: Bad substitution
This also follows other naming conventions seen in the
wild.
r267345:
Explicitly set MK_DEBUG_FILES=no, which overrides the
WITH_DEBUG_FILES=1 and WITHOUT_DEBUG_FILES=1 collisions
previously experienced.
This change allows us to create the {base,kernel}_debug.txz
distributions without accidentally installing the *.debug
files on the medium itself.
r267397:
Remove evaluations of MK_DEBUG_FILES where not needed.
If DEBUG_DISTRIBUTIONS is empty, which is true if
MK_DEBUG_FILES evaluates to 'no' above, the loop does
nothing.
MFC after: 1 month
Tested on: head@r267801
Reviewed by: brooks [1], emaste, imp [1]
[1] earlier version
Sponsored by: The FreeBSD Foundation
This allows greater granular control over the release
build, and avoids WITH_FOO=1 and WITHOUT_FOO=1 collision.
This change was verified to produce correct results
compared to an earlier build by diffing find(1) output
of the resulting bootonly/, dvd/, and release/ directories.
Tested on: head@r267449
MFC after: 1 month
X-MFC-Note: Requires commits not yet MFC'd, so likely
longer than 1 month.
Sponsored by: The FreeBSD Foundation
remove the now-redundant checks for RELEASE_CRUNCH. This originally
was defined for building smaller sysinstall images, but was later also
used by picobsd builds for a similar purpose. Now that we've moved
away from sysinstall, picobsd is the only remaining consumer of this
interface. Adding these two options reduces the RELEASE_CRUNCH
special cases in the tree by half.
add a -j option so we can tune the amount of parallel make,
the default we used (-j 8) is large and was giving problems
with SUBDIR_PARALLEL due to some missing dependencies.
- Use ASSUME_ALWAYS_YES=YES instead of ASSUME_ALWAYS_YES=1
since pkg-1.3 expects "yes" or "true" values.
- Before exporting PKG_ABI, strip extra characters from what
is parsed from 'pkg -vv'. This causes problems further down
when creating the packages directory for inclusion on the
dvd1.iso. Previously PKG_ABI would be 'freebsd:9:x86:64',
but now is '"freebsd:9:x86:64";' in pkg-1.3
Tested on: stable/9@r265858 with ports-mgmt/pkg-devel
MFC After: 3 days
Sponsored by: The FreeBSD Foundation
The FreeBSD Foundation and Google, Inc.[1]
Since this was dual-sponsored, the sponsorurl needs
to be empty.
Add Google to the sponsor.ent file.
Reminded by: rwatson [1]
Sponsored by: The FreeBSD Foundation
sponsored and/or contributed works.
This works similarly to how the subversion revision is
suffixed in release notes entries when 'revision="NNNNNN"'
is set.
The <para> tag in relnotes/article.xml can now take the
following new elements:
- contrib: defined to what type of contribution the change
is. Right now, only 'vendor' or 'sponsor' are used.
'vendor' is intended for vendor-contributed code, such as
driver updates, etc. 'sponsor' is intended for sponsored
work (the 'Sponsored by:' in the commit template).
- vendor: The canonical name of the vendor.
- sponsor: The canonical name of the sponsor.
- vendorurl: The URL for the vendor website, if applicable.
- sponsorurl: The URL for the sponsor website, if applicable.
If 'vendor' or 'sponsor' are set, but 'contrib' is not, nothing
is rendered. If 'contrib' is set, but no 'vendor' or 'sponsor'
are defined, nothing is printed. If 'vendorurl' or 'sponsorurl'
are set, the 'vendor' or 'sponsor' text is link, otherwise is
non-clickable text.
Sponsored by: The FreeBSD Foundation
'Relnotes:' tag in case 'yes' is not explicitly
the first string value following the tab.
As it turns out, a number of commits have bypassed
my filters (both email and 'svn log --search'), and
this script returns the results I want when doing
these searches.
Sponsored by: The FreeBSD Foundation
On head/, or more specifically, when WITNESS is in
the kernel config, the console is spammed excessively
with lock order reversal between isofs and devfs.
Set debug.witness.trace=0 in the installer sysctl.conf
to avoid printing the full KDB stack backtrace. This
does not prevent printing the lock order reversal has
happened, only lessens the console spam.
Sponsored by: The FreeBSD Foundation
and working on QEMU. Actually using this script as the regular image
generator, like with the memstick one, will require that the kernel support
EFI too. In particular, the following two things are required:
1. vt(9) be the default console driver
2. vt_efifb and vt_vga be able to coexist usefully in the same kernel
One other note here is that this requires newfs_msdos and mdconfig, which is
really ugly. NetBSD's makefs at least seems to support FAT now. If that
actually works, it should be imported and we can get rid of the mdconfig mess.
mini-memstick.img with UEFI support.
As the comments in the file suggest, 1) there must
be existing ${.OBJDIR}/usr/src/release/{release,bootonly};
2) TARGET/TARGET_ARCH must be amd64; and 3) it must be
a vt(4)-enabled kernel with vt_efifb (*not* vt_vga).
This script is not hooked into release/Makefile in any way
until further testing is complete.
Sponsored by: The FreeBSD Foundation
Restore make-memstick.sh back to its original state to
unbreak booting for machines that do not support GPT.
I have in-progress work to keep the MBR layout and add
the EFI partition, but it is not yet ready, and does
need at least one full release build to be certain it
does not break.
Sponsored by: The FreeBSD Foundation
- Indent 1 full tab where needed
- Use $() for shell exec
- Insert a space between '$(( ))' parens
MFC After: 1 week
X-MFC-With: r264907
Sponsored by: The FreeBSD Foundation
dedicated' partition scheme, reported to cause the memstick.img
to fail to boot.
Similar to how make-memstick.sh worked on stable/8, use makefs(8)
to create the actual filesystem. Then calculate the size of the
resulting image file, create the GPT partition scheme, then dd(1)
the filesystem created with makefs(8) to the freebsd-ufs GPT
partition.
This was tested on a known-working machine[1] for regression, and
a known-not-working machine[2] to ensure the boot issue has been
resolved.
Testers: myself [1], db [2]
MFC After: 1 week
Sponsored by: The FreeBSD Foundation
XDEV_FLAGS variable in ${KERNCONF}.conf file.
MFC after: 3 days
X-MFC-Note: fix stable/10 XDEV_FLAGS local for branch
Sponsored by: The FreeBSD Foundation
For stable/10, r264703 sets the correct WITH/WITHOUT
knobs to get xdev built with the arm-freebsd-gcc binary
installed. Unfortunately, the same fix does not work on
head/.
Also, quite to my amazement, WITH_GCC=1 and WITH_GNUCXX=1
causes xdev to fail spectactularly at least on r264791.
The situation as it stands is:
- gcc(1) is needed for the u-boot build.
- cc(1) *cannot* be clang(1)
To shoe-horn the toolchain to make 'xdev' give what is
needed, remove WITH_GNUCXX=1 and add WITH_GCC_BOOTSTRAP=1.
MFC After: 1 week
X-MFC-To: stable/10 only
X-MFC-Note: after stable/10 is broken in this way...
Sponsored by: The FreeBSD Foundation
- gcc(1) fails to build usr.bin/dtc
- lack of WITH_GNUCXX=1 causes cc1plus(1) calls to fail
- u-boot fails to build with clang (hard-coded gcc(1) calls)
Implement the proper incantation of WITH_/WITHOUT_ knobs
to get arm snapshot builds working again.
Since the cc(1) binary is no longer expected to be clang(1),
remove the chroot(8) post-install cc(1) overwrite.
MFC After: 3 days
X-MFC-With: r264518,r264697,r264698
Tested on: stable/10@r264677 RPI-B
Sponsored by: The FreeBSD Foundation
WITHOUT_CLANG_IS_CC=1, it appears WITHOUT_CLANG=1 must
also be set.
While here, reorder the lines to put the WITH_* and
WITHOUT_* entries on the same line.
MFC After: 3 days
X-MFC-With: r264518
Tested on: stable/10@r264677
Sponsored by: The FreeBSD Foundation
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
variables. These are intended to allow bypassing the
'svn co /usr/{src,doc,ports}' step in the chroot when the
tree exists from external means.
The use case here is that /usr/src, /usr/doc, and /usr/ports
in the chroot exist as result of zfs dataset clones, so it
is possible (and happens quite often) that the included
distributions may not be consistent. (This is not the case
for -RELEASE builds, but does happen for snapshot builds.)
Tested on: stable/9@r264319
MFC After: 3 days
Sponsored by: The FreeBSD Foundation
when WITH_COMPRESSED_IMAGES is used.
Requested by: delphij, brooks, Nikolai Lifanov
MFC After: 1 week
X-MFC-With: r264027,r264028,r264029,r264030
Sponsored by: The FreeBSD Foundation
When set to a non-empty value, the installation medium is
compressed with gzip(1) as part of the 'install' target in
the release/ directory.
With gzip(1) compression, downloadable image are reduced in
size quite significantly. Build test against head@263927
shows the following:
bootonly.iso: 64% smaller
disc1.iso: 44% smaller
memstick.img: 47% smaller
mini-memstick.img: 65% smaller
dvd1.iso: untested
This option is off by default, I would eventually like to
turn it on by default, and remove the '-k' flag to gzip(1)
so only compressed images are published on FTP.
Requested by: wkoszek
MFC After: 1 week
Sponsored by: The FreeBSD Foundation
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
release.conf SVNROOT entries that do not have a trailing '/'.
In order to provide a mechanism to use !svn, the trailing '/'
was added to SVNROOT so there were no assumptions being made
about '/' being in the URL between SVNROOT and SRCBRANCH.
Sponsored by: The FreeBSD Foundation
After several months of testing and fixing (and breaking)
various parts of release/release.sh changes, it is now
possible to build FreeBSD/arm images as part of the release
process.
When EMBEDDEDBUILD is set in the release.conf file, release.sh
will create the build environment, then run a separate script
in release/${XDEV}/release.sh [1]. Currently, only arm is
supported.
The release/${XDEV}/release.sh configures the build environment
specific for the target image, such as installing gcc(1),
installing additional third-party software from the ports tree,
and fetching external sources.
Once the build environment is set up, release/${XDEV}/release.sh
runs Crochet, written by Tim Kientzle, which builds the userland
and kernel, and creates an image that can be written to an SD
card with dd(1). Many thanks to Tim for his work on Crochet.
Sample configurations for FreeBSD/arm boards are in the
release/arm/ directory, and Crochet configuration files for each
board are located in release/tools/arm/. Supported boards at this
time are: BEAGLEBONE, PANDABOARD, RPI-B, and WANDBOARD-QUAD.
Adding support for additional boards will continue in the
projects/release-embedded/ branch, and incrementally merged back
to head/.
Many thanks to the FreeBSD Foundation for the support and
sponsorship of this project.
[1] XDEV is used in order to keep the various configurations
organized by architecture, but since TARGET and TARGET_ARCH
are used to build the chroot, the values of those variables
cannot be used.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
src/ and ports/ distributions.
While I am thinking about it, exclude .git directories for src/
and ports/, as somewhat of a followup to r262499.
Sponsored by: The FreeBSD Foundation
- Add a VCSCMD variable that defaults to 'svn checkout',
and update places 'svn co' is used directly.
- After sourcing a configuration file, prefix SRCBRANCH,
PORTBRANCH, and DOCBRANCH with the SVNROOT.
- Properly capitalize 'FreeBSD.org' in the default SVNROOT.
- Update Copyright.
release.conf.sample:
- Add an example to use git instead of svn, by nullifying
SVNROOT, and setting SRCBRANCH, DOCBRANCH, and PORTBRANCH
to the URL fo a git repository.
release.7:
- Document VCSCMD.
Submitted by: Rick Miller (based on)
Sponsored by: The FreeBSD Foundation
^/user/gjb/hacking/release-embedded:
259994,260000,260895-260896,261139,261152,
261174,261176,261210,261221,261237,261239,
261448,261489
^/user/gjb/release-embedded:
262305,262307
svn:mergeinfo is intentionally not included in the commit, so it does
not propagate to head/.
Sponsored by: The FreeBSD Foundation
Document r261498 - ping uses the Capsicum framework to drop privileges
Document r261344 - mdocml have been upgraded to version 1.12.3
Documetn r261991 - llvm/clang have been upgraded to version 3.4
Approved by: hrs (mentor)
