CAM.
Desriptor sense is a new sense data format that originated in SPC-3. Among
other things, it allows for an 8-byte info field, which is necessary to
pass back block numbers larger than 4 bytes.
This change adds a number of new functions to scsi_all.c (and therefore
libcam) that abstract out most access to sense data.
This includes a bump of CAM_VERSION, because the CCB ABI has changed.
Userland programs that use the CAM pass(4) driver will need to be
recompiled.
camcontrol.c: Change uses of scsi_extract_sense() to use
scsi_extract_sense_len().
Use scsi_get_sks() instead of accessing sense key specific
data directly.
scsi_modes: Update the control mode page to the latest version (SPC-4).
scsi_cmds.c,
scsi_target.c: Change references to struct scsi_sense_data to struct
scsi_sense_data_fixed. This should be changed to allow the
user to specify fixed or descriptor sense, and then use
scsi_set_sense_data() to build the sense data.
ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data
manually.
cam_periph.c: Use scsi_extract_sense_len() instead of using
scsi_extract_sense() or accessing sense data directly.
cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of
struct scsi_sense_data from 32 to 252 bytes changes the
size of struct ccb_scsiio, but not the size of union ccb.
So the version must be bumped to prevent structure
mis-matches.
scsi_all.h: Lots of updated SCSI sense data and other structures.
Add function prototypes for the new sense data functions.
Take out the inline implementation of scsi_extract_sense().
It is now too large to put in a header file.
Add macros to calculate whether fields are present and
filled in fixed and descriptor sense data
scsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry
data, and we'll assume a direct access device in that case.
Changed the SCSI RESERVED sense key name and description
to COMPLETED, as it is now defined in the spec.
Change the error recovery action for a number of read errors
to prevent lots of retries when the drive has said that the
block isn't accessible. This speeds up reconstruction of
the block by any RAID software running on top of the drive
(e.g. ZFS).
In scsi_sense_desc(), allow for invalid sense key numbers.
This allows calling this routine without checking the input
values first.
Change scsi_error_action() to use scsi_extract_sense_len(),
and handle things when invalid asc/ascq values are
encountered.
Add a new routine, scsi_desc_iterate(), that will call the
supplied function for every descriptor in descriptor format
sense data.
Add scsi_set_sense_data(), and scsi_set_sense_data_va(),
which build descriptor and fixed format sense data. They
currently default to fixed format sense data.
Add a number of scsi_get_*() functions, which get different
types of sense data fields from either fixed or descriptor
format sense data, if the data is present.
Add a number of scsi_*_sbuf() functions, which print
formatted versions of various sense data fields. These
functions work for either fixed or descriptor sense.
Add a number of scsi_sense_*_sbuf() functions, which have a
standard calling interface and print the indicated field.
These functions take descriptors only.
Add scsi_sense_desc_sbuf(), which will print a formatted
version of the given sense descriptor.
Pull out a majority of the scsi_sense_sbuf() function and
put it into scsi_sense_only_sbuf(). This allows callers
that don't use struct ccb_scsiio to easily utilize the
printing routines. Revamp that function to handle
descriptor sense and use the new sense fetching and
printing routines.
Move scsi_extract_sense() into scsi_all.c, and implement it
in terms of the new function, scsi_extract_sense_len().
The _len() version takes a length (which should be the
sense length - residual) and can indicate which fields are
present and valid in the sense data.
Add a couple of new scsi_get_*() routines to get the sense
key, asc, and ascq only.
mly.c: Rename struct scsi_sense_data to struct
scsi_sense_data_fixed.
sbp_targ.c: Use the new sense fetching routines to get sense data
instead of accessing it directly.
sbp.c: Change the firewire/SCSI sense data transformation code to
use struct scsi_sense_data_fixed instead of struct
scsi_sense_data. This should be changed later to use
scsi_set_sense_data().
ciss.c: Calculate the sense residual properly. Use
scsi_get_sense_key() to fetch the sense key.
mps_sas.c,
mpt_cam.c: Set the sense residual properly.
iir.c: Use scsi_set_sense_data() instead of building sense data by
hand.
iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data
directly.
umass.c: Use scsi_set_sense_data() to build sense data.
Grab the sense key using scsi_get_sense_key().
Calculate the sense residual properly.
isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key
values.
Calculate and set the sense residual.
MFC after: 3 days
Sponsored by: Spectra Logic Corporation
As of FreeBSD 6, devices can only be opened through devfs. These device
nodes don't have major and minor numbers anymore. The st_rdev field in
struct stat is simply based a copy of st_ino.
Simply display device numbers as hexadecimal, using "%#jx". This is
allowed by POSIX, since it explicitly states things like the following
(example taken from ls(1)):
"If the file is a character special or block special file, the
size of the file may be replaced with implementation-defined
information associated with the device in question."
This makes the output of these commands more compact. For example, ls(1)
now uses approximately four columns less. While there, simplify the
column length calculation from ls(1) by calling snprintf() with a NULL
buffer.
Don't be afraid; if needed one can still obtain individual major/minor
numbers using stat(1).
reordering won't make the actual write to be committed before marking
the coresponding extent as dirty.
It can be disabled in configuration file.
If BIO_FLUSH is not supported by the underlying file system we log a warning
and never send BIO_FLUSH again to that GEOM provider.
MFC after: 3 days
on a disk with non zero stripesize (e.g. disks with 4k sector size)[1].
Also do not use automatic alignment when size is exactly specified, but
an alignment is not. Use automatic alignment only for case when user
omits both "-s" and "-a" options.
Reported by: Mikael Fridh <frimik at gmail> [1]
Approved by: re (kib)
MFC after: 1 week
options don't leak over into subsequent mounts listed in /etc/fstab.
While here, fix a memory leak in debug mode.
Reported by: rank1seeker @ gmail
Approved by: re (kib)
MFC after: 1 week
The value of namlen is copied from on-disk d_namlen, which is a 8-bit
unsigned integer which can never exceed MAXNAMLEN (255) so the test is
always true. Moreover, UFS does not allow d_namelen being zero.
Change namlen from u_int to u_int8_t, and replace the unneeded test
with a useful test.
PR: bin/160339
Submitted by: Eugene Grosbein <eugen grosbein.pp.ru>
MFC after: 2 weeks
Approved by: re (kib)
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.
Obtained from: David Dolson at Sandvine Incorporated
(original version for ipfw fwd IPv6 support)
Sponsored by: Sandvine Incorporated
PR: bin/117214
MFC after: 4 weeks
Approved by: re (kib)
maximum value instead of number of bits. But for case when
limitation is not needed it erroneously skips conversion to
number and always returns zero. So, don't skip conversion
for case when limitation is not needed.
PR: bin/159765
Approved by: re (kib)
bootstrap code images used to boot from MBR, GPT, BSD and VTOC8
schemes.
Reviewed by: marius (previous version)
Approved by: re (kib)
MFC after: 1 week
based on the patch in the PR, however he was unaware that they were
undocumented intentionally. This patch moves the information about
these alternates into a comment which also explains why they are
undocumented.
Approved by: re (hrs)
so that it is visible to userland programs. This change enables
the `mount' command with no arguments to be able to show if a
filesystem is mounted using journaled soft updates as opposed
to just normal soft updates.
Approved by: re (bz)
on frequency bands with DFS. All Atheros chipsets >= AR9001 support
radar event detection on HT40 extension channels.
This should be a chipset specific item rather than enforced in the
regulatory domain database.
In addition, it's irrelevant for STA mode, as the radar detection is
done by the access point, not the STA.
Approved by: re (kib)
list channel' is run. The following new options are introduced:
* D: channel requires DFS
* R: channel has a radar event
* I: channel has detected inteference
* C: the CAC period has completed on a channel that requires it (ie,
DFS + PASSIVE.)
It's relevant for developing, debugging and using the DFS and
interference options.
Approved by: re (bz)
a /rescue/ifconfig more modern than the kernel could still configure
IPv4 or IPv6 addresses.
Reported by: Andrzej Tobola (ato iem.pw.edu.pl)
Reported by: gcooper
MFC after: 1 day
X-MFC: will not MFC any time soon, just reminder for r222527
fdisk(1) internally uses a signed int. Should a user attempt to specify
a slice containing more than 2^31 - 1 sectors, an error will be reported
on systems with sizeof(long) == 4 and the slice size will be silently
truncated on systems with sizeof(long) > 4.
Instead use an unsigned long to store the slice size in fdisk(1). This
allows the user to specify a slice size up to the maximum permitted by
the MBR on-disk format and does not have any problems with silent
truncation should the use specify an slice size larger than 2^32 on systems
with sizeof(long) > 4.
Submitted by: Mark Johnston (markjdb AT gmail DOT com)
MFC after: 2 weeks
to be assigned to a non-default FIB instance.
You may need to recompile world or ports due to the change of struct ifnet.
Submitted by: cjsp
Submitted by: Alexander V. Chernikov (melifaro ipfw.ru)
(original versions)
Reviewed by: julian
Reviewed by: Alexander V. Chernikov (melifaro ipfw.ru)
MFC after: 2 weeks
X-MFC: use spare in struct ifnet
possible to organize subroutines with rules.
The "call" action saves the current rule number in the internal
stack and rules processing continues from the first rule with
specified number (similar to skipto action). If later a rule with
"return" action is encountered, the processing returns to the first
rule with number of "call" rule saved in the stack plus one or higher.
Submitted by: Vadim Goncharov
Discussed by: ipfw@, luigi@
