remaining consumers to have the count passed as an option. This is
i4b, pc98/wdc, and coda.
Bump configvers.h from 500013 to 600000.
Remove heuristics that tried to parse "device ed5" as 5 units of the ed
device. This broke things like the snd_emu10k1 device, which required
quotes to make it parse right. The no-longer-needed quotes have been
removed from NOTES, GENERIC etc. eg, I've removed the quotes from:
device snd_maestro
device "snd_maestro3"
device snd_mss
I believe everything will still compile and work after this.
a SEMICOLON token (a newline or semicolon, or one of these preceded
by a comment and/or whitespace). The input stream was switched too
early and the parser was expecting a SEMICOLON in the included file
instead of after the filename in the include directive.
Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
Kept alive by: Adam C. Migus <adam@migus.org>
is common in British English, while "toward" is the preferred form in
American English. Use the American form for consistency.
Correct the date on the manual page.
Submitted by: Tom Rhodes <trhodes@freebsd.org>,
underway@comcast.net (Gary W. Swearingen)
from .c files. Actually, this is overkill, as the .ln file targets
are assumed from .? (any) files. This is not a problem in practice,
merely a bit untidy, as the linting rules DTRT. See the sys/conf/*
and sys/mk/* files for usage.
and due to buffering they would sometimes come out after the actual
error message when mkheaders() failed due to an unknown device, so you'd
get an error messages followed by 20 or 30 lines of harmless warnings.
There are lots of other warning messages in config(8) that are printed
on stdout, but these were the most egregious (at least with LINT).
Fixed memory leak in the "nodevice" option implementation.
Use these instead of sed(1) in MD NOTES.
Use a single makefile (sys/conf/makeLINT.mk) to generate
LINT for all architectures. (Previous versions missed
the LINT dependency on Makefile, and i386 version also
missed the dependency on ${NOTES}.)
Fixed bugs in the previous NOTES conversion using the
"nodevice" token and sed(1):
- i386 LINT lost "device pst".
- pc98 LINT lost SC_*, MAXCONS and KBD_DISABLE_KEYMAP_LOAD
options, and got needless DPT_* options.
- Added nooptions PPC_DEBUG, PPC_PROBE_CHIPSET, KBD_INSTALL_CDEV
to sparc64 LINT so that it has a chance to config(8).
This basically returns us to where we were before.
(PROFLEVEL) to kern.pre.mk so that it is easier to manage. Bumped config
version to match.
Moved the check for cputype being configured to a less bogus place in
mkmakefile.c.
It doesn't actually do it yet though. This adds a flag to config so
that we can exclude certain vendor files from this even when the rest
of the kernel has it on. make -DNO_WERROR would also bypass all of it.
stealth hints loading. 'make release' has been fixed to not need this
now anyway. If you want static hints, specify it explicitly.
Hey! Why did it suddenly get so dark??
to be included into this one. This works the same way as #include
does in C; as far as the user is concerned, the included file is
inlined into the current one.
Since config(8) is no longer limited to working on one user-supplied
file, printing just a line number in an error message is not
sufficient. The new global variable yyfile represents the file
currently being parsed, and must be printed as well.
Reviewed by: imp
Obtained from: OpenBSD
and one for Makefile options, pass in the list head and use a common
newopt() routine.
Fix the 'config vmunix' support glue which was broken for a few minutes.
(I think config(8) source does bad things to your brain :-)
Clean up likely stray *.h files in the build directory.
Eg: if isa.h ceases being generated, zap it.
The heuristics to figure out a 'likely' file are pretty revolting.
FreeBSD 3.x or so when the 'make depend' picked up the opt_foo.h files.
Convert warnings into actual errors in the hope that buildkernel users
will pay more attention. :-(
as a replacement for the evil #define NFOO. If 'device npx' is in the
static kernel, a synthetic option '#define DEV_NPX 1' will be available
to stick in an opt_xxx.h file. "#if NNPX > 0" can be replaced with
"#ifdef DEV_NPX" and we can get rid of the overloaded meaning of the
device count mechanism.
for your /usr/obj/path/to/my/files path to the kernel, then weird
things happened. make buildkernel would fail because config was
dumping core or generating bad file names (depending on the lenght of
the path).
While I was here, also use strlcpy, strlcat and snprintf (or asprintf)
as necessary. Minor format policing for the snprintf calls as well.
Use Warner Losh's "hint" driver to decode ascii strings to fill the
resource table at boot time.
config(8) no longer generates an ioconf.c table - ie: the configuration
no longer has to be compiled into the kernel. You can reconfigure your
isa devices with the likes of this at loader(8) time:
set hint.ed.0.port=0x320
userconfig will be rewritten to use this style interface one day and will
move to /boot/userconfig.4th or something like that.
It is still possible to statically compile in a set of hints into a kernel
if you do not wish to use loader(8). See the "hints" directive in GENERIC
as an example.
All device wiring has been moved out of config(8). There is a set of
helper scripts (see i386/conf/gethints.pl, and the same for alpha and pc98)
that extract the 'at isa? port foo irq bar' from the old files and produces
a hints file. If you install this file as /boot/device.hints (and update
/boot/defaults/loader.conf - You can do a build/install in sys/boot) then
loader will load it automatically for you. You can also compile in the
hints directly with: hints "device.hints" as well.
There are a few things that I'm not too happy with yet. Under this scheme,
things like LINT would no longer be useful as "documentation" of settings.
I have renamed this file to 'NOTES' and stored the example hints strings
in it. However... this is not something that config(8) understands, so
there is a script that extracts the build-specific data from the
documentation file (NOTES) to produce a LINT that can be config'ed and
built. A stack of man4 pages will need updating. :-/
Also, since there is no longer a difference between 'device' and
'pseudo-device' I collapsed the two together, and the resulting 'device'
takes a 'number of units' for devices that still have it statically
allocated. eg: 'device fe 4' will compile the fe driver with NFE set
to 4. You can then set hints for 4 units (0 - 3). Also note that
'device fe0' will be interpreted as "zero units of 'fe'" which would be
bad, so there is a config warning for this. This is only needed for
old drivers that still have static limits on numbers of units.
All the statically limited drivers that I could find were marked.
Please exercise EXTREME CAUTION when transitioning!
Moral support by: phk, msmith, dfr, asmodai, imp, and others
config(8). This commit allows control of the creation of the
#include "foo.h" files. We now only create them explicitly when needed.
BTW; these are mostly bad because they usually imply static limits on
numbers of units for devices. eg: struct mysoftc sc[NFOO];
These static limits have Got To Go.
the need to specify the unit number of unwired devices. ie: instead
of saying "device fxp0" we can say "device fxp" which is much closer
to what it actually means. The former (fxp0) implied something about
reserving the 0th unit, but it does not and never did - it was a
figment of config(8)'s imagination that we had to work around..
"device fxp0" simply means "compile in the fxp device driver", so we
may as well just write it as "device fxp" which is closer to what it
really means.
Doing this also saves us from filling up the ioconf.c tables with
meaningless entries.
instead of -2. This (I believe) caused static wirings to not match.
This should fix Bill Pechter's problem but we'll see.
Problem discovered by: Bill Pechter <pechter@shell.monmouth.com>
This would mean that we could move files.alpha, files.i386, files.pc98
etc all next to conf/files, and the various Makefiles next to each
other. This should go a long way towards committers "seeing" the
Alpha etc stuff and remembering to update that too as it would be
right next to the i386 config files. Note this does not include
the GENERIC etc files as they can't be shared. I haven't actually
moved the files, but the support is here for it. It still supports
the per-machine conf directories so that folks working on a new arch
can just distribute a subdir of files.
- redo the "at" configuration system so that it just syntax checks
to make sure the device you're configuring something "at" appears to
exist. Nuke a bunch of complexity that was responsible for creating
"clones" of wildcard devices and some wierd stuff in a few places
including the scbus config tables etc.
- merge "controller" and "device" - there is no difference as far as
the kernel is concernend, it's just something there to make life
difficult for config file writers. "controller" is now an alias for
"device".
- emit full scsi config into the resource tables. We could trivially
change cam to use that rather than it's own "special" table for wiring
and static configuration. ATA could use this too for static wiring.
- try and emulate some of the quirks of the old system where it made
sense. Some were too strange though and I'd be very suprised if they
were features and not outright bugs. nexus handling is still strange.
One thing in particular is that some of the wierd entries in the
newbus devtables is now gone as it was a quirk side effect of the
wildcard/question-mark cloning above.
GENERIC and LINT still build etc.
known option, unknown options following the known option were not
removed. Now I think only unknown options in unknown options files
are not removed. This is harmless because unknown options files should
not be used, but removing the files would be cleaner.
files in a 'files.XXX' file, config allows non-FreeBSD source files
with the same name as a FreeBSD source file to override the latter,
and in this situation it issues a warning.
However, if one of the user-specified files is actually a FreeBSD
source file (perhaps your kernel has some custom option that requires
that file), config mistakenly thinks it's a completely new file
and goes ahead and overrides all previous information for that file
(and issues the warning).
Fix this.
With help from: julian
directory than the default one. If the option is not given, then the
output of config is exactly as before. Only when an alternate output
directory has been specified will config modify its behavior.
Additional changed:
o Remove the now conflicting and unused NODEV define. It
conflicts with NODEV in sys/param.h.
o Rename the now conflicting MACHINE token to ARCH. It
conflicts with MACHINE in sys/param.h.
o Fix some easy style bugs.
o Fix some easy grammar bugs in the manpage.
Approved by: peter, archie
track.
The Id line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;
.\" $Id$
.\"
If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.
Approved by: bde
'makeoptions KERNEL=kernelname'. Warn about any trailing stuff as it's
not handled here. This is a simple bandaid, hopefully to head off some
complaints from certain people.
- make this work: options FOO123=456 *without quotes*
- grumble (but accept) vector xxxintr, and tty/net/bio/cam flags.
- complain if a device is specified twice (eg: 2 x psm0)
- don't require quotes around: port IO_COM2
- recognize negative numbers. (ie: options CAM_DEBUG_UNIT=-1)
- GC some more unused stuff (we don't have composite disks from config(8)).
- various other nits (snprintf paranoia etc)
I zapped the MACHINE_MIPS stuff, it isn't likely to be useful apart from
recognition of the machine name. It would be reasonable to expect new
ports would look something like the alpha/i386 from a config perspective.
only worked for configurations with "swap on generic".
usr.sbin/config/config.y:
- ignore all "swap [on] device ...' specifications except for
warning about them. They haven't done anything related to swap
for almost 4 years, and were previously silently ignored,
except for "swap on generic" which stopped swap${KERNEL}.c
from being generated. Code to support swapping is now deader
than before.
usr.sbin/config/mkswapconf.c:
- don't generate a dummy setconf() function in swap${KERNEL}.c.
sys/i386/conf/files.i386:
- swapgeneric.c is now standard. It should be merged into autoconf.c
so that it doesn't conflict with swap${KERNEL}.c for kernels named
"generic".
sys/i386/i386/autoconf.c:
- don't call setroot() for mfs roots. Since setroot() doesn't do anything
harmful, this was just a waste of time, except possibly for booting with
-a it may have helped prevent an undesireable call to setconf() by
finding a bogus rootdev.
- honor -a for ffs roots. -a now overrides all other ways of specifying
the root device. Previously, -r had precedence over -a, and the -a
handling was usually a no-op.
- don't honor -a for non-ffs roots, since it would currently just get in
the way of a clean panic.
sys/i386/i386/swapgeneric.c:
- don't declare things that are now always declared in swap${KERNEL}.c.
Don't decide things that are now decided in autoconf.c. Code to
support the "generic" case is now dead instead of useless.
Requested-by: ache
bde
dg
Modify targets for debug kernels: when -g was specified, make will
now build a debug kernel called kernel.debug, and create a stripped
version called kernel at the same time. The two targets install and
install.debug are otherwise unchanged.
Requested-by: dillon
Update man page accordingly.
2. Config complains if you use -g:
Debugging is enabled by default, there is no ned to specify the -g option
3. Config warns you if you don't use -s:
Building kernel with full debugging symbols. Do
"config -s BSD" for historic partial symbolic support.
To install the debugging kernel, do make install.debug
(BSD was the name of the config file I used; I print out the same
name).
4. Modify Makefile.i386, Makefile.alpha, Makefile.pc98 and config to
work if a kernel name other than 'kernel' is specified. This is
not absolutely necessary, but useful, and it was relatively easy.
I now have a kernel called /crapshit :-)
5. Modify Makefile.i386, Makefile.alpha, Makefile.pc98 "clean" target
to remove both the debug and normal kernel.
6. Modify all to install the stripped kernel by default and the debug
kernel if you enter "make install.debug".
7. Update version number of Makefiles and config.
2. Config complains if you use -g:
Debugging is enabled by default, there is no ned to specify the -g option
3. Config warns you if you don't use -s:
Building kernel with full debugging symbols. Do
"config -s BSD" for historic partial symbolic support.
To install the debugging kernel, do make install.debug
(BSD was the name of the config file I used; I print out the same
name).
4. Modify Makefile.i386, Makefile.alpha, Makefile.pc98 and config to
work if a kernel name other than 'kernel' is specified. This is
not absolutely necessary, but useful, and it was relatively easy.
I now have a kernel called /crapshit :-)
5. Modify Makefile.i386, Makefile.alpha, Makefile.pc98 "clean" target
to remove both the debug and normal kernel.
6. Modify all to install the stripped kernel by default and the debug
kernel if you enter "make install.debug".
7. Update version number of Makefiles and config.
Previously the foolowing lines would have broken:
controller fdc0 at isa? disable port ? bio
controller fdc0 at isa? disable port 0x100 bio
While this would work:
controller fdc0 at isa? disable port "IO_FD1" bio
The first of the three lines is useful for making placeholder devices
for PCMCIA-floppies, and the second is useful for non-standard hardware.
The failure is a "(null)" string in ioconf.c that the compiler pukes on.
Thanks to: Bruce Evans (bde@freebsd.org)
Interrupt handlers are now configured in drivers.
Didn't update config/SMM.doc. It doesn't have any i386 examples (not
even `isa').
Bumped CONFIGVERS. This is not necessary for -current yet, but using
the new config with old system sources gives null pointers for all
vectors.
Didn't bump CONFIGVERS, since ioconf.h was already unused when
CONFIGVERS was last bumped (although essentially the same (CAM)
commit batch that bumped CONFIGVERS also added bogus includes of
ioconf.h).
define MAXUSERS in opt_param.h as directed in /sys/conf/options;
if it's not mentioned there, then define it in IDENT; never define
it in PARAM). MAXUSERS probably should be a completely normal option.
Don't define PARAM now that it is empty.
Cleaned up similar conversion of cpu directives to XXX_CPU options.
was used as if it is 1-based. This happened to give the correct result
for options without values because of a compensating error in newline
lexing. Didn't fix the latter, so line numbers in yyerror() may still
be 1 too high in some cases.
Don't generate declarations for isa interrupt handlers at all.
Isa interrupt handlers are now declared in <i386/isa/isa_device.h>
but should be converted take a `void *' arg and staticized as
soon as possible.
Updated CONFIGVERS. New configs are very incompatible with
previous versions.
candidate for this is "npx0", more are likely to follow.
Check for pseudo-devices that are being configured, but don't appear
in any "files" file. The ``pseudo-device bpf 2'' already hit me too
often.
and the kernel will have a 'config interface version number'. If an
incompatable change is made to the kernel that requires a rebuild of
config(8) (such as the cam devtab stuff), then the version number would be
bumped in both places. If a user neglects to rebuild config, then they
will get a nagging (but non-fatal) warning that they need to rebuild
config.
it's done for pci. This is so that systat and vmstat can get at the
interrupt counts for the Inter-Processor Interrupts when running a smp
kernel. This doesn't affect the normal kernel, but makes life easier for
the smp people who don't have to track two versions of config.
non-standard and not used. "port auto" is equal to "port?" or missing "port"
keyword now. "port none" is really probe routine task (return -1 for
no ports).
- Use MAP_FAILED instead of the constant -1 to indicate
failure (required by POSIX).
- Removed flag arguments of '0' (required by POSIX).
- Fixed code which expected an error return of 0.
- Fixed code which thought any address with the high bit set
was an error.
- Check for failure where no checks were present.
Discussed with: bde
version of strdup() by a macro, killed many calls to strdup(), thus
potentially wasting less malloc'ed space (their args were never be
free()ed desptie despite of being malloc'ed). Probably still a huge
memory leak at all... Also killed two totally useless variables.
I've tested it as i could, but wouldn't be surprised if unexpected
problems showed up. So watch out this space!
