iBCS2 was disconnected from the build in 2015 (see r291419)
bsdconfig parts submitted by dteske.
Reviewed by: kib (previous version)
Sponsored by: The FreeBSD Foundation
More time is still needed for ports to accommodate the migration to
capsicum.h.
The header was renamed in 2014 due to concerns about conflicts with with
a draft POSIX.1e capability.h header on other systems and there is (now)
no need for complex autoconf tests for both capability.h and capsicum.h.
Any supported Capsicum-capable system has capsicum.h.
Reported by: antoine
Sponsored by: The FreeBSD Foundation
In r263232 sys/capability.h was renamed to sys/capsicum.h, to avoid
conflicts with a capability.h header found on other operating systems.
Sufficient time has now passed, so remove the old header at the
beginning of FreeBSD 13.
Discussed with: oshogbo
Sponsored by: The FreeBSD Foundation
Remove malloc_domain(9) and most other _domain KPIs added in r327900.
The new functions allow the caller to specify a general NUMA domain
selection policy, rather than specifically requesting an allocation from
a specific domain. The latter policy tends to interact poorly with
M_WAITOK, resulting in situations where a caller is blocked indefinitely
because the specified domain is depleted. Most existing consumers of
the _domain KPIs are converted to instead use a DOMAINSET_PREF() policy,
in which we fall back to other domains to satisfy the allocation
request.
This change also defines a set of DOMAINSET_FIXED() policies, which
only permit allocations from the specified domain.
Discussed with: gallatin, jeff
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17418
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much. However, even though this device
has been obsolete for 15 years at least, sys/joystick.h is included in
a number of graphics packages still, so that remains. A full exprun
is needed before that can be removed.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
I held the mistaken belief this was completely unused. While the
driver is unused and likely not relevant for a long time,
sys/joystick.h lives on in maybe half a dozen ports, even though
hardware to use it hasn't been widely used in maybe 15 years.
Remove mse and all support for bus and inport devices from the tree.
Data from nycbug's dmesg database shows the last sighting of this
driver was in 4.10 on only one machine.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D17628
This driver was marked as gone in 12. We're at 13 now. Remove it.
Data from nycbug's dmesg cache shows only one potential user,
suggesting it never was used much.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D17629
- Update OpenSSL to version 1.1.1.
- Update Kerberos/Heimdal API for OpenSSL 1.1.1 compatibility.
- Bump __FreeBSD_version.
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
This will need a real date once this is merged to head.
One weird thing to note: the 32-bit engines get dumped into /usr/lib32
rather than /usr/lib32/engines, and I bet the 32-bit libcrypto.so i
looking for the .so files in the wrong place. We should probably fix
both of those at some point.
Reviewed by: emaste, jkim
Differential Revision: https://reviews.freebsd.org/D17384
vermaden (maintainer of beadm) points out the following inconsistencies:
- "missing command" is not printed prior to usage if the error is simply a
missing command; this should be obvious from the context
- "bectl rename" isn't using the "don't unmount" flag (zfs rename -u), so
the active BE can't be renamed. It doesn't make sense in our context to
*not* use -u, so use it.
Documentation updates reflect the above and note an inconsistency with the
'destroy' command that is consistent with other parts of the base system.
A fix for libbe(3) not properly being installed to /lib is included.
SHLIBDIR should have been added when it was moved in r337995.
Approved by: re (kib)
ObsoleteFiles.inc:
Remove manual pages for arc4random_addrandom(3) and
arc4random_stir(3).
contrib/ntp/lib/isc/random.c:
contrib/ntp/sntp/libevent/evutil_rand.c:
Eliminate in-tree usage of arc4random_addrandom().
crypto/heimdal/lib/roken/rand.c:
crypto/openssh/config.h:
Eliminate in-tree usage of arc4random_stir().
include/stdlib.h:
Remove arc4random_stir() and arc4random_addrandom() prototypes,
provide temporary shims for transistion period.
lib/libc/gen/Makefile.inc:
Hook arc4random-compat.c to build, add hint for Chacha20 source for
kernel, and remove arc4random_addrandom(3) and arc4random_stir(3)
links.
lib/libc/gen/arc4random.c:
Adopt OpenBSD arc4random.c,v 1.54 with bare minimum changes, use the
sys/crypto/chacha20 implementation of keystream.
lib/libc/gen/Symbol.map:
Remove arc4random_stir and arc4random_addrandom interfaces.
lib/libc/gen/arc4random.h:
Adopt OpenBSD arc4random.h,v 1.4 but provide _ARC4_LOCK of our own.
lib/libc/gen/arc4random.3:
Adopt OpenBSD arc4random.3,v 1.35 but keep FreeBSD r114444 and
r118247.
lib/libc/gen/arc4random-compat.c:
Compatibility shims for arc4random_stir and arc4random_addrandom
functions to preserve ABI. Log once when called but do nothing
otherwise.
lib/libc/gen/getentropy.c:
lib/libc/include/libc_private.h:
Fold __arc4_sysctl into getentropy.c (renamed to arnd_sysctl).
Remove from libc_private.h as a result.
sys/crypto/chacha20/chacha.c:
sys/crypto/chacha20/chacha.h:
Make it possible to use the kernel implementation in libc.
PR: 182610
Reviewed by: cem, markm
Obtained from: OpenBSD
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16760
* libcasper.so.0, which started in /usr/lib, then moved to /lib, but
was later replaced by libcasper.so.1
* 32-bit versions of static casper libraries
* 32-bit versions of static stand libraries
* 32-bit versions of static ifc(onfig) libraries
The is required because libpcap.so depends on the libraries when OFED
is enabled.
Reviewed by: bdrewery, hselasky
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D16230
Remove numactl(1), edit numa(4) to bring it some closer to reality,
provide libc ABI shims for old NUMA syscalls.
Noted and reviewed by: brooks (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16142
kgdb now handles kernel module state internally, so the asf tool serves
no purpose.
PR: 229046
Reviewed by: brooks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15827
This file has only generated a warning for the last 18 months. Its
existence at this point only serves to confuse software looking for
POSIX.1e capabilities and produce actionless warnings.
GNU grep as in actually in base does not have any translations support
compiled in, so no functionnality loss.
We do support 193 locales in base, we will never catch up on that number of
translation with bsd grep.
Removing NLS support make bsd grep consistent with the other binaries in base
which are not translated, and also reduce a little bit the code.
Reviewed by: kevans
Approved by: kevans
Discussed with: kevans @BSDCan
Differential Revision: https://reviews.freebsd.org/D15682
This driver was merged to HEAD one week prior to Exar publicly announcing they
had left the Ethernet market. It is not known to be used and has various code
quality issues spotted by Brooks and Hiren. Retire it in preparation for
FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: brooks imp
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15442
Remove sys/modules/ixgb and add the linked man page for if_ixgb via
ObsoleteFiles.
Submitted by: kbowling
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15273
This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
When we had both groff and mandoc in base, we decided to keep the roff(7)
manpage from groff. when remoing groff, we forgot to install the mandoc version
instead.
This fixes it.
Reported by: trasz
MFC after: 1 week
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
efi.4th was added to ObsoleteFiles and disconnected from the build, but not
removed from hte repo. We've since found a mild use for it that makes some
amount of sense, so partially revert r328780 and bring it back to life.
Reported by: many
X-MFC-With: r331326
It has been replaced by /boot/dtb/overlays. We haven't yet populated it with
any of our own overlays, so no further damage from here.
Reported by: Oliver Pinter <oliver.pinter@hardenedbsd.org>
only installed on arm and sparc64.
It is the only bits that keeps us having libreadline in base
The rest of gdb can be switched to libedit and will be in another
commit
I had thought that this would be useful. However it was committed too
late, and wound up being unused. It's in the way of future work now,
so retire it rather than bring it forward.
loader scripts. However, that path won't be taken after all it
seems. Remove this code before it decays into uselessness. Also remove
build dependencies on forth no longer needed.
6.0.0 (branches/release_60 r321788). Upstream has branched for the
6.0.0 release, which should be in about 6 weeks. Please report bugs and
regressions, so we can get them into the release.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
MFC after: 3 months
more in r317426. There's nothing in the tree that references digiio.h
(apart from digictl(8)), so no driver implements it. Since digictl(8)
was only used to control digi(4) devices, it too should go.
I'm leaving readonly_test and nokey_test alone for now. In a future commit
they should be broken up into several smaller test cases and distributed
between multiple files.
Reviewed by: ngie
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13717
We use /usr/share/skel instead of /etc/skel. The existence of /etc/skel
has confused people.
PR: 46062 (submitted 2002-12-07)
PR: 218897
Submitted by: carl@slackerbsd.org
Submitted by: asv@inhio.net
Now that the POSIX working group is going to require that basename(3)
and dirname(3) are thread-safe in future revisions of the standard,
there is even less of a need to provide basename_r(3). Remove this
function to prevent people from writing code that only builds on
FreeBSD and Bionic.
Removing this function seems to break exactly one port: sbruno@'s
qemu-user-static. I will send him a pull request on GitHub in a bit.
__FreeBSD_version will not be bumped, as any value from 2017 can be used
to test for the presence of a thread-safe basename(3)/dirname(3).
PR: https://bugs.freebsd.org/224016
xlint is currently a fossil. We have much more useful and alive tools
to do now what xlint did twenty years ago.
I did not cleared some stuff which makes lint operational, in
sys/x86/include and sys/sys, but I might do it as followup. The
x86/include/ucontext.h and _types.h hacks made to please lint was the
main reason for my initial proposal to classify xlint as obsolete and
to remove it.
Also I do not intend to clear sccs ids.
Reviewed by: bapt, brooks, emaste, jhb, pfg
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D13015
The information here is somewhere between ancient to obsolete.
It refers to a time in the internet's history when manual routing
was still useful, talks about UUCP as if its modern, and refers
to documents which I had trouble tracking down.
It seems unlikely that a manual page in this form would be useful, so
just remove it.
Reviewed By: imp, tsoome, bdrewery(?)
Differential Revision: https://reviews.freebsd.org/D12924
Failure modes of the modern (that is, produced in the last 25 years)
hard drives and SSDs made the utility outdated. Since the kernel
interface to support it was removed in r324853, cut the userspace
remnants as well.
Discussed with: bde (who does not like the removal)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Despite the fact that it's a working solution, it doesn't follow the design
philosophy of only doing TARGET_* in Makefile.inc1 and special locations in
the source tree.
PR: 222925
Requested by: imp
respected.
Please notice that libcasper is already in ObsoleteFiles so we don't add it
again.
Reported by: Herbert J. Skuhra <herbert@mailbox.org>
Reviewed by: bdrewery@
Differential Revision: https://reviews.freebsd.org/D12918
mbpool existed to support NICs with memory interfaces and all remaining
comsumers were removed earlier this year with NATM.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10513
If they are still needed, you can find them in the net/bsdrcmds port.
This was proposed June, 20th and approved by various committers [1].
They have been marked as deprecated on CURRENT in r320644 [2] on July, 4th.
Both stable/11 and release/11.1 contain the deprecation notice (thanks to
allanjude@).
Note that ruptime(1)/rwho(1)/rwhod(8) were initially thought to be part of
rcmds but this was a mistake and those are therefore NOT removed.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html
[2] https://svnweb.freebsd.org/base?view=revision&revision=320644
Reviewed by: bapt, brooks
Differential Revision: https://reviews.freebsd.org/D12573
It was supposed to provide a recovery mechanism against bugs in procfs's
long deprecated tracing capabilities.
Remove the tool as a prerequisite to axing the kernel side.
The tracing facility to use is ptrace(2).
MFC after: 2 weeks
In base, locales (and encoding) specific directories are not used
by any tool. Just remove them.
While here also remove the cat page directory for openssl
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
- Store the symbol table contents in an anonymous swap-backed object. Have
mmap(/dev/ksyms) map that object, and stop mapping the symbol table into
the calling process in ksyms_open(). Previously we would cache a pointer
to the pmap of the opening process, and mmap(/dev/ksyms) would create a
mapping using the physical address found by a pmap lookup at the initial
mapping address. However, this assumes that the cached pmap is valid,
which may not be the case. [1]
- Remove the ksyms ioctl interface. It appears to have been added to work
around a limitation in libelf that no longer exists; see r321842.
Moreover, the interface is difficult to support and isn't present in
illumos. Since ksyms was added specifically to support lockstat(1), it
is expected that this removal won't have any real impact.
- Simplify ksyms_read() to avoid unnecessary copying.
- Don't call the device handle destructor if we fail to capture a snapshot
of the kernel's symbol table. devfs will do that for us.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com> [1]
Reviewed by: kib (previous revision)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11789
The tests are largely symmetric with the tests for chmod(1)--added in r319642.
Remove chown-f_test (added in r268030) since the test coverage is now being
provided by `chown_test`.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
The documentation moved to section 3 several years ago, but
'man cap_rights_get' pulls up cap_rights_limit(2) (which is
MLINKed to cap_rights_get.2) instead of cap_rights_get(3).
MFC after: 1 week
In FreeBSD we only use mdoc(7) format. A template is available as mdoc.template
The usage of man(7) format is discouraged and this file was driving people into
the front direction as a template to use.
roff documentation from the build.
Those documents will be added to the doc tree and distributed as PDF from
the documentation website. As they are valuable has history, but do not match
current FreeBSD
Further more, the ascii format we were using to distribute them is not really
accurate for such documents.
more details:
https://lists.freebsd.org/pipermail/freebsd-arch/2017-May/018211.html
patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
naming scheme
usr.bin/diff/diff_test was renamed to usr.bin/diff/netbsd_diff_test
to avoid collisions with the renamed FreeBSD test.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Document work done by mmacy/sbruno to merge the two drivers together
and convert em(4) to the iflib framework.
X-MFC with: r311849
Sponsored by: Dell EMC Isilon
The failing test requires the zh_TW.Big5 locale, which is no longer
installed as of r315568.
Add a note/pointer just in case someone considers re-adding it.
Reported by: Jenkins
Sponsored by: Dell EMC Isilon
The path was elided with the existing geli tests under
/usr/tests/sys/geom/class/eli/... in r315230.
MFC after: 2 weeks (if r315230, etc isn't MFCed at once)
Sponsored by: Dell EMC Isilon
that they still work. These utilities have become out of sync with the
code in the kernel and need work to bring them back into shape.
Most people test on real systems or VMs on real networks.
Suggested by: glebius
Some of the modifications from the previous summer of code has been integrated
Modification for compatibility with GNU diff output has been added
Main difference with OpenBSD:
Implement multiple GNU diff options:
* --ignore-file-name-case
* --no-ignore-file-name-case
* --normal
* --tabsize
* --strip-trailing-cr
Make diff -p compatible with GNU diff
Implement diff -l
Make diff -r compatible with GNU diff
Capsicumize diffing 2 regular files
Add a simple test suite
Approved by: AsiaBSDcon devsummit
Obtained from: OpenBSD, GSoC
Relnotes: yes
This ensures their cleanup routines will be run even if they should timeout.
tests/sys/geom/class/gate/ggate_test.sh
tests/sys/geom/class/gate/Makefile
Add an ATF test with three testcases, one for each TAP test. Use
ATF-style cleanup functions, and convert sleeps to polling loops.
ObsoleteFiles.inc
tests/sys/geom/class/gate/conf.sh
tests/sys/geom/class/gate/1_test.sh
tests/sys/geom/class/gate/2_test.sh
tests/sys/geom/class/gate/3_test.sh
Delete TAP test files
Reviewed by: ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D8891
Although it increases the size of the bsnmp{get,set,walk} binaries by
four on my [amd64] system, it removes the need for producing .debug
files, profiled libraries, and for installing the library itself,
reducing the overall size use on disk by the utilities noted
previously.
Plus, it guards against ABI/API compatibility issues with the library
as it's only used internal to the tools themselves.
MFC after: 3 weeks
As a followup to r310638, update libsysdecode (and kdump) to decode the
'mode' argument to getfsstat(). sysdecode_getfsstat_flags() has been
renamed to sysdecode_getfsstat_mode() and now treats the argument as an
enumerated value rather than a mask of flags.
Sync libarchive with vendor.
Vendor changes (relevant to FreeBSD):
PR #771: Add NFSv4 ACL support to pax and restricted pax
NFSv4 ACL information may now be stored to and restored from tar archives.
ACL must be non-trivial and supported by the underlying filesystem, e.g.
natively by ZFS or by UFS with the NFSv4 ACL enable flag set.
MFC after: 2 weeks
Relnotes: yes
After r293285 GNU ld is installed as /usr/bin/ld.bfd, and linked as
/usr/bin/ld. The debug file is /usr/lib/debug/usr/bin/ld.bfd.debug.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This man page was removed in r225583 when cc.4 was renamed to mod_cc.4
With reintroduction of cc.4 "make installworld; make delete-old" was
no longer convergent.
Reported by: Trond Endrestøl
Reviewed by: np, matthew
Approved by: np, matthew (mentor)
Differential Revision: https://reviews.freebsd.org/D8816
We shouldn't install them on the architectures not supported by Hyper-V.
And, hv_ata_pci_disengage.4.gz should be removed from all architectures:
1) It should have only applied to Hyper-V;
2) For Hyper-V platforms (amd64 and i386), the related driver was removed by
r306426 | sephe | 2016-09-29 09:41:52 +0800 (Thu, 29 Sep 2016),
because now we have a better mechanism to disble the ata driver for hard
disks when the VM runs on Hyper-V.
Reviewed by: sephe, andrew, jhb
Approved by: sephe (mentor)
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8572
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
GNU rcs is still available as a package:
- rcs: Latest GPLv3 GNU rcs version.
- rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.
Relnotes: yes
- Add m_getclr(9) symlink to ObsoleteFiles.inc (removed in r295481).
- Add const qualifiers in m_dup(), m_dup_pkthdr() and m_tag_copy_chain()
(r286450).
- Fix m_dup_pkthdr() definition (it's not the same as m_move_pkthdr()).
MFC after: 5 days
In FreeBSD 11 ELF Tool Chain's elfcopy is installed as objcopy by
default, with the option to switch back to GNU objcopy by setting
WITHOUT_ELFCOPY_AS_OBJCOPY in make.conf.
We plan to remove the outdated in-tree binutils in FreeBSD 12, so
remove the temporary transition aid.
Reviewed by: brooks, imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7337
This is being done to clearly distinguish the libkqueue tests
from the (soon to be imported) NetBSD tests.
MFC after: 58 days
Sponsored by: EMC / Isilon Storage Division
This driver only supports 10Mb Ethernet using PIO (the hardware supports
DMA, but the driver only does PIO). There are not any PCCard adapters
supported by this driver, only ISA cards. In addition, it does not use
bus_space but instead uses bcopy with volatile pointers triggering a
host of warnings. (if_ie.c is one of 3 files always built with
-Wno-error)
Relnotes: yes
This hardware is not present on any modern systems. The driver is quite
hackish (raw inb/outb instead of bus_space, and raw inb/outb to random
I/O ports to enable ACPI since it predated proper ACPI support).
Relnotes: yes
The wl(4) driver supports pre-802.11 PCCard wireless adapters that
are slower than 802.11b. They do not work with any of the 802.11
framework and the driver hasn't been reported to actually work in a
long time.
Relnotes: yes
The si(4) driver supported multiport serial adapters for ISA, EISA, and
PCI buses. This driver does not use bus_space, instead it depends on
direct use of the pointer returned by rman_get_virtual(). It is also
still locked by Giant and calls for patch testing to convert it to use
bus_space were unanswered.
Relnotes: yes
This is a driver for a pre-ATAPI ISA CD-ROM adapter. As noted in
the manpage, this driver is only useful as a backend to cdcontrol to
play audio CDs since it doesn't use DMA, so its data performance is
"abysmal" (and that was true in the mid 90's).
kk_KZ.UTF-8 was originally removed in r290494, but restored as an alias to
en_US.UTF-8 in r302329
MFC after: 1 week
X-MFC with: r302329
PR: 211046
Reported by: dhw, O. Hartman <ohartman@zedat.fu-berlin.de>
Sponsored by: EMC / Isilon Storage Division
libkvm.so lives in /lib, not /usr/lib
MFC after: 3 days
X-MFC note: ^/stable/11 only
X-MFC with: r298840
Submitted by: Herbert J. Skuhra <herbert@mailbox.org>
Sponsored by: EMC / Isilon Storage Division
For all locales with variants:
- if no ambiguity on the locale (only one variant) just use the regular name
- if ambiguity, pick one as default and append @<variant> to the others
respecting POSIX
As a result:
- All the 3 components locales added recently are renamed to the usual 2
components version for all but sr_RS.UTF-8
- Set sr_RS.UTF-8 to the cyrillic variant
- Add sr_RS.UTF-8@latin
- Remove the symlinks aliases they were created to represent the 2 components
version as aliasas and are now useless
- Update the OptionalObsoleteFiles.inc and ObsoleteFiles.inc to reflect those
changes
Discussed with: ache@
Approved by: re@ (gjb)
At some point during stable/10, the headers altq_codel.h and
altq_fairq.h where added to /usr/include/altq, before all of altq
was moved to /usr/include/net/altq.
Reviewed by: rpaulo
Approved by: rpaulo
Differential Revision: https://reviews.freebsd.org/D6596
This libcall has been broken since (at least) r174989/8.0-RELEASE.
Bump SHLIB_MAJOR for the change
Differential Revision: https://reviews.freebsd.org/D6052
Relnotes: yes
Reviewed by: jhb, markj
Sponsored by: EMC / Isilon Storage Division
