Also switch from int to size_t to keep portability.
Reviewed by: brooks
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D17795
Architectures Software Developer’s Manual Volume 3"). Add the document
to SEE ALSO in bhyve.8 (and pet manlint here a bit).
Reviewed by: jhb, rgrimes, 0mp
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D17531
Alternatively to IPv4 address:port this will allow to listen on IPv6
link-local (incl. scope), a specific address, or ::. Addresses have
to be given in RFC2732 format so that [::]:port parsing will work.
This patch also starts to introduce WITH_INET/INET6_SUPPORT to bhyve.
PR: 232018
Submitted by: Dave Rush (northwoodlogic.free gmail.com) (original)
Reviewed by: Dave Rush (updated verison)
MFC after: 3 days
For tools that uses bhyve such like libvirt, it is important to be able to
probe what features are supported by the given bhyve binary.
To give more context, libvirt probes bhyve's capabilities in a not very
effective way:
- Running 'bhyve -h' and parsing output.
- To detect devices, it runs 'bhyve -s 0,dev' for every each device and
parses error output to identify if the device is supported or not.
PR: 2101111
Submitted by: novel
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems Inc.
The original NVMe API used bit-fields to represent fields in data
structures defined by the specification (e.g. the op-code in the command
data structure). The implementation targeted x86_64 processors and
defined the bit fields for little endian dwords (i.e. 32 bits).
This approach does not work as-is for big endian architectures and was
changed to use a combination of bit shifts and masks to support PowerPC.
Unfortunately, this changed the NVMe API and forces #ifdef's based on
the OS revision level in user space code.
This change reverts to something that looks like the original API, but
it uses bytes instead of bit-fields inside the packed command structure.
As a bonus, this works as-is for both big and little endian CPU
architectures.
Bump __FreeBSD_version to 1200081 due to API change
Reviewed by: imp, kbowling, smh, mav
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D16404
The bhyve(8) exit status indicates how the VM was terminated:
0 rebooted
1 powered off
2 halted
3 triple fault
The problem is when we have wrappers around bhyve that parses the exit
error code and gets an exit(1) for an error but interprets it as "powered off".
So to mitigate this issue and makes it less error prone for third part
applications, I have added a new exit code 4 that is "exited due to an error".
For now the bhyve(8) exit status are:
0 rebooted
1 powered off
2 halted
3 triple fault
4 exited due to an error
Reviewed by: @jhb
MFC after: 2 weeks.
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D16161
The initial work on bhyve NVMe device emulation was done by the GSoC student
Shunsuke Mie and was heavily modified in performan, functionality and
guest support by Leon Dang.
bhyve:
-s <n>,nvme,devpath,maxq=#,qsz=#,ioslots=#,sectsz=#,ser=A-Z
accepted devpath:
/dev/blockdev
/path/to/image
ram=size_in_MiB
Tested with guest OS: FreeBSD Head, Linux Fedora fc27, Ubuntu 18.04,
OpenSuse 15.0, Windows Server 2016 Datacenter.
Tested with all accepted device paths: Real nvme, zdev and also with ram.
Tested on: AMD Ryzen Threadripper 1950X 16-Core Processor and
Intel(R) Xeon(R) CPU E5-2609 v2 @ 2.50GHz.
Tests at: https://people.freebsd.org/~araujo/bhyve_nvme/nvme.txt
Submitted by: Shunsuke Mie <sux2mfgj_gmail.com>,
Leon Dang <leon_digitalmsx.com>
Reviewed by: chuck (early version), grehan
Relnotes: Yes
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D14022
allocation, I could identify that actually we use this pointer on pci_emul.c as
well as on vga.c source file.
I have reworked the logic here to make it more readable and also add a warn to
explicit show the function where the memory allocation error could happen,
also sort headers.
Also CID 1194192 was marked as "Intentional".
Obtained from: TrueOS
MFC after: 4 weeks.
Sponsored by: iXsystems Inc.
Also stdarg(3) says that each invocation of va_start() must be paired
with a corresponding invocation of va_end() in the same function. [1]
Reported by: Coverity
CID: 1194318[0] and 1194332[1]
Discussed with: jhb
MFC after: 4 weeks.
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D15548
strdup(3) allocates memory for a copy of the string, does the copy and
returns a pointer to it. If there is no sufficient memory NULL is returned
and the global errno is set to ENOMEM.
We do a sanity check to see if it was possible to allocate enough memory.
Also as we allocate memory, we need to free this memory used. Or it will
going out of scope leaks the storage it points to.
Reviewed by: rgrimes
MFC after: 3 weeks.
X-MFC: r332298
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D15550
will be returned to indicate the error, so I'm applying an assert(3) to do
a sanity check of the return value.
Reported by: Coverity CID: 1391235, 1193654 and 1193651
Reviewed by: grehan
MFC after: 4 weeks.
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D15533
a diagnostic message. So we do a sanity checking on the return value
of vq_getchain().
Spotted by: gcc49
Reviewed by: avg
MFC after: 4 weeks
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D15388
The prior code only allowed multiples of 32 for the
numbers of columns. Remove this restriction to allow
a forthcoming UEFI firmware update to allow arbitrary
x,y resolutions.
(the code for handling rows already supported non mult-32 values)
Reviewed by: Leon Dang (original author)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15274
This commit adds a new debug server to bhyve. Unlike the existing -g
option which provides an efficient connection to a debug server
running in the guest OS, this debug server permits inspection and
control of the guest from within the hypervisor itself without
requiring any cooperation from the guest. It is similar to the debug
server provided by qemu.
To avoid conflicting with the existing -g option, a new -G option has
been added that accepts a TCP port. An IPv4 socket is bound to this
port and listens for connections from debuggers. In addition, if the
port begins with the character 'w', the hypervisor will pause the
guest at the first instruction until a debugger attaches and
explicitly continues the guest. Note that only a single debugger can
attach to a guest at a time.
Virtual CPUs are exposed to the remote debugger as threads. General
purpose register values can be read for each virtual CPU. Other
registers cannot currently be read, and no register values can be
changed by the debugger.
The remote debugger can read guest memory but not write to guest
memory. To facilitate source-level debugging of the guest, memory
addresses from the debugger are treated as virtual addresses (rather
than physical addresses) and are resolved to a physical address using
the active virtual address translation of the current virtual CPU.
Memory reads should honor memory mapped I/O regions, though the debug
server does not attempt to honor any alignment or size constraints
when accessing MMIO.
The debug server provides limited support for controlling the guest.
The guest is suspended when a debugger is attached and resumes when a
debugger detaches. A debugger can suspend a guest by sending a Ctrl-C
request (e.g. via Ctrl-C in GDB). A debugger can also continue a
suspended guest while remaining attached. Breakpoints are not yet
supported. Single stepping is supported on Intel CPUs that support
MTRAP VM exits, but is not available on other systems.
While the current debug server has limited functionality, it should
at least be usable for basic debugging now. It is also a useful
checkpoint to serve as a base for adding additional features.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D15022
from userland without the need to use sysctls, it allows the old
sysctls to continue to function, but deprecates them at
FreeBSD_version 1200060 (Relnotes for deprecate).
The command line of bhyve is maintained in a backwards compatible way.
The API of libvmmapi is maintained in a backwards compatible way.
The sysctl's are maintained in a backwards compatible way.
Added command option looks like:
bhyve -c [[cpus=]n][,sockets=n][,cores=n][,threads=n][,maxcpus=n]
The optional parts can be specified in any order, but only a single
integer invokes the backwards compatible parse. [,maxcpus=n] is
hidden by #ifdef until kernel support is added, though the api
is put in place.
bhyvectl --get-cpu-topology option added.
Reviewed by: grehan (maintainer, earlier version),
Reviewed by: bcr (manpages)
Approved by: bde (mentor), phk (mentor)
Tested by: Oleg Ginzburg <olevole@olevole.ru> (cbsd)
MFC after: 1 week
Relnotes: Y
Differential Revision: https://reviews.freebsd.org/D9930
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
