This waits for the requested process(es) to terminate, rather than polling
with an interval of 2 seconds.
If pwait is not available, the old method is used.
PR: conf/132766
Reviewed by: dougb
write to. This is specified in "options { directory }" in named.conf.
So, create /etc/namedb/working with appropriate permissions, and
update the entry in named.conf to match.
In addition to specifying the working directory, file and path names
in named.conf can be specified relative to the directory listed.
However, since that directory is now different from /etc/namedb
(where the configuration, zone, rndc.*, and other files are located)
further update named.conf to specify all file names with fully
qualified paths. Also update the comment about file and path names
so users know this should be done for all file/path names in the file.
This change will eliminate the 'working directory is not writable'
messages at boot time without sacrificing security. It will also
allow for features in newer versions of BIND (9.7+) to work as
designed.
exiting a pager, vi, etc.
Add some example xterm*-clear entries to the termcap files to make
it easier for people to enable that behavior.
Document the examples in the man page to make them easier to find.
command in the rc.d script if we have a corresponding ${name}_program
entry, which we do for named.
Rename named_precmd to named_prestart to make it more clear and match
convention.
Move the command_args definition related to -u up into _prestart().
It (and the associated $named_uid value) are only used there, and
unlike required_* and pidfile don't need to be used until this stage.
Fix a silly bug that would only have affected people who were using
the new named_wait or named_auto_forward features, AND had set up an
rndc.conf file instead of using the automatically generated rndc.key.
For named_conf:
Add "-c $named_conf" to command_args if it's not set to the
default. If it is set to the default and we're using the base
BIND it's not necessary. If we're using BIND from the ports
the user is likely to have included it in _flags (due to long
necessity for doing so) so don't duplicate that if it's set.
Add $named_conf to required_files
It turns out these entries do make Terminal.app behave a little better.
According to Thomas Dickey, Terminal.app should use TERM=nsterm anyway,
but we don't support this yet. Already having an improved termcap entry
helps, so I am going to MFC this change after all.
Suggested by: Leonidas Tsampros <ltsampros upnet gr>
MFC after: 1 month
protocol flaw. [09:15]
Correctly handle failures from unsetenv resulting from a corrupt
environment in rtld-elf. [09:16]
Fix permissions in freebsd-update in order to prevent leakage of
sensitive files. [09:17]
Approved by: so (cperciva)
Security: FreeBSD-SA-09:15.ssl
Security: FreeBSD-SA-09:16.rtld
Security: FreeBSD-SA-09:17.freebsd-udpate
Right now syscons(4) uses a cons25-style terminal emulator. The
disadvantages of that are:
- Little compatibility with embedded devices with serial interfaces.
- Bad bandwidth efficiency, mainly because of the lack of scrolling
regions.
- A very hard transition path to support for modern character sets like
UTF-8.
Our terminal emulation library, libteken, has been supporting
xterm-style terminal emulation for months, so flip the switch and make
everyone use an xterm-style console driver.
I still have to enable this on i386. Right now pc98 and i386 share the
same /etc/ttys file. I'm not going to switch pc98, because it uses its
own Kanji-capable cons25 emulator.
IMPORTANT: What to do if things go wrong (i.e. graphical artifacts):
- Run the application inside script(1), try to reduce the problem and
send me the log file.
- In the mean time, you can run `vidcontrol -T cons25' and `export
TERM=cons25' so you can run applications the same way you did before.
You can also build your kernel with `options TEKEN_CONS25' to make all
virtual terminals use the cons25 emulator by default.
Discussed on: current@
This will prevent that the script hangs during startup, which
could cause annoying effects after rebooting for example.
PR: kern/139422
Submitted by: Andrey Groshev <greenx at yartv dot ru>
Approved by: imp (mentor, implicit)
MFC after: 3 days
Facilitated by: Snow B.V.
By misinterpreting some data, I thought that getty wouldn't apply any
baud rate to the syscons devices, but it uses the default entry instead.
This means that the baud rate is set to 1200. This isn't too bad, except
when using canonical mode. Make it use 9600 baud by default.
MFC after: 1 week
Devices that don't implement param() (which means they don't support
hardware parameters such as flow control, baud rate) hardcode the baud
rate to TTYDEF_SPEED. This means the buffer size cannot be configured,
which is a little inconvenient when using canonical mode with big lines
of input, etc.
Make it adjustable, but do clamp it between B50 and B115200 to prevent
awkward buffer sizes. Remove the baud rate assignment from
/etc/gettytab. Trust the kernel to fill in a proper value.
Reported by: Mikolaj Golub <to my trociny gmail com>
MFC after: 1 month
employ a more generic solution, and use it in the individual rc.d scripts
that also have an $rc_quiet test:
1. Add check_startmsgs() to rc.subr.
2. In the rc.d scripts that use rc_quiet (and rc.subr) substitute
variations of [ -z "$rc_quiet" ] with check_startmsgs
3. In savecore add a trailing '.' to the end of the message to make it
more consistent with other scripts.
4. In newsyslog remove a : before the terminal '.' since we do not expect
there to be anything printed out in between to make it more consistent.
5. In the following scripts change "quotes" to 'quotes' where no variables
exist in the message: savecore pf newsyslog
6. In the following scripts substitute if/then/fi for the simpler (and
more consistent) check_startmsgs &&: faith stf
7. In the following scripts separate the "Starting foo:" from the terminal
'.' to make them more consistent: moused hostname pf
8. In nfsclient move the message to its own line to avoid a style bug
9. In pf rc_quiet does not apply to the _stop method, so remove the
test there.
10. In motd add 'quotes' around the terminal '.' for consistency
for each address family. Replace AF_static() with static_AF() for
consistency.
- Display a message only if the user sets a non-default value, and set
a sysctl explicitly even if it is the default value.
- Split netoptions_start() to netoptions_AF() and add afexists() check
for each address family.
- Display a message only if the user sets a non-default value, and set
a sysctl explicitly even if it is the default value.
Spotted by: Pegasus Mc Cleaft[*]
an IPv6 support.
Reported by: Alexander Best <alexbestms__at__math.uni-muenster.de>
Confirmed by: Paul B. Mahol <onemda__at__gmail.com>,
Alexander Best <alexbestms__at__math.uni-muenster.de>
fstab: /etc/fstab:0: No such file or directory
and from dump(8) when setfsent(3) fails due to /etc/fstab not existing:
DUMP: Can't open /etc/fstab for dump table information: No such...
This makes daily and security periodic runs somewhat cleaner in jails
which lack /etc/fstab files.
MFC after: 1 month
re-add $ipv6_enable support for backward compatibility. From
UPDATING:
1. To use IPv6, simply define $ifconfig_IF_ipv6 like $ifconfig_IF
for IPv4. For aliases, $ifconfig_IF_aliasN should be used.
Note that both variables need the "inet6" keyword at the head.
Do not set $ipv6_network_interfaces manually if you do not
understand what you are doing. It is not needed in most cases.
$ipv6_ifconfig_IF and $ipv6_ifconfig_IF_aliasN still work, but
they are obsolete.
2. $ipv6_enable is obsolete. Use $ipv6_prefer and/or
"inet6 accept_rtadv" keyword in ifconfig(8) instead.
If you define $ipv6_enable=YES, it means $ipv6_prefer=YES and
all configured interfaces have "inet6 accept_rtadv" in the
$ifconfig_IF_ipv6. These are for backward compatibility.
3. A new variable $ipv6_prefer has been added. If NO, IPv6
functionality of interfaces with no corresponding
$ifconfig_IF_ipv6 is disabled by using "inet6 ifdisabled" flag,
and the default address selection policy of ip6addrctl(8)
is the IPv4-preferred one (see rc.d/ip6addrctl for more details).
Note that if you want to configure IPv6 functionality on the
disabled interfaces after boot, first you need to clear the flag by
using ifconfig(8) like:
ifconfig em0 inet6 -ifdisabled
If YES, the default address selection policy is set as
IPv6-preferred.
The default value of $ipv6_prefer is NO.
4. If your system need to receive Router Advertisement messages,
define "inet6 accept_rtadv" in $ifconfig_IF_ipv6. The rc(8)
scripts automatically invoke rtsol(8) when the interface becomes
UP. The Router Advertisement messages are used for SLAAC
(State-Less Address AutoConfiguration).
legacy IP handling rather than the IPv6 version.
Reported by: Pegasus Mc Cleaft (ken mthelicon.com)
Tested by: Pegasus Mc Cleaft (ken mthelicon.com)
MFC after: 2 days
X-MFX with: r197139
network_ipv6->rc.d/netif integration:
- $ipv6_enable is now obsolete. Instead, IPv6 is enabled by
default if the kernel supports it, and $ipv6_network_interfaces
is "none" by default. If you want to use IPv6, define
$ipv6_network_interfaces and $ifconfig_xxx_ipv6.
An interface which is in $network_interfaces and not in
$ipv6_network_interfaces will be marked as "inet6
-auto_linklocal ifdisabled" (see ifconfig(8)).
- $ipv6_ifconfig_xxx is renamed to ifconfig_xxx_ipv6 for
consistency with other address families. The old variables
still work but can be removed in the future. Note that
ipv6_ifconfig_xxx="..." should be replaced with
ifconfig_xxx_ipv6="inet6 ...".
- Receiving ICMPv6 Router Advertisement is not automatically
enabled even if there is no manual configuration of IPv6 in
rc.conf. If you want it, define
ifconfig_xxx_ipv6="inet6 ... accept_rtadv".
- The rc.d/ip6addrctl now chooses address selection policy based
on $ipv6_prefer, not $ipv6_enable. The default is
ipv6_prefer=NO.
- $router* and $ipv6_router* are replaced with $routed_* and
$route6d_* for consistency. The old variables still work but
can be removed in the future.
MFC after: 3 days
and $desc.
The set_rcvar_obsolete() is for displaying an obsolete variable
and the new one. More specifically, a warning is displayed when
a variable is removed or changed in the source tree and the user
still defines the old one.
$router* and $ipv6_router* are replaced with $routed_* and
$route6d_* for consistency. The old variables still work but
can be removed in the future.
MFC after: 3 days
