breaking the ABI. Special value is stored in the lock pointer to
indicate shared lock, and offline page in the shared memory is
allocated to store the actual lock.
Reviewed by: vangyzen (previous version)
Discussed with: deischen, emaste, jhb, rwatson,
Martin Simmons <martin@lispworks.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
Note: tcsh(1) has a MK_TCSH=no test, so this should be a separate
package, which requires pre-install/post-install scripts, to be
added later.
Sponsored by: The FreeBSD Foundation
Builtins (including variable assignments without command word), function
calls and redirected compound commands need to restore file descriptors
to their original state after execution. This is handled by allocating a
redirtab structure. These mallocs and frees show up heavily in pmcstat.
Only allocate a redirtab if there are actually redirections and maintain a
count of how many levels of REDIR_PUSH there are without redirtabs.
A simple loop without external programs like
sh -c 'i=0; w=$(printf %0100d 7); while [ "$i" -lt 1000000 ]; do
i=$((i+1)); done'
is over 25% faster on an amd64 bhyve VM.
Forbid (temporary or permanent) modifications of the strings in NARG nodes
during expansion.
Tilde expansion now needs to copy the username for the terminating '\0'.
Per POSIX, 'cd -' should use the OLDPWD shell variable, not internal state.
This variable is normally exported.
Also, if OLDPWD is not set, fail 'cd -' instead of changing to the current
directory.
Some variables like PATH call a function when modified. Make sure to call
this also when leaving a function where such a variable was made local.
Make sure to restore local variables before shellparam, so getopts state is
not clobbered.
Redirect 'cd -' output to /dev/null since POSIX requires it to write the new
directory name even if not interactive, but we currently only write it if
interactive.
Command substitutions containing a single simple command and here-document
expansion are performed in a subshell environment, but may not fork. Any
modified state of the shell environment should be restored afterward.
The state that OPTIND=1 had been done was not saved and restored here.
Note that the other parts of shellparam need not be saved and restored,
since they are not modified in these situations (a fork is done before such
modifications).
With the new expand.c code, the intermediate representation passed to the
pathname generation code only contains CTLESC, not CTLQUOTEMARK.
CTLQUOTEMARK now only occurs in the text of NARG nodes (output of the
parser).
This avoids the need to add and remove CTLESC bytes if pathname generation
will not be performed (set -f).
Side effect: the order of operations is slightly different: pathname
generation in ${$+* $(CMD)} will not see filesystem changes from CMD.
This simplifies the code and should be faster in some cases.
Side effect: the order of operations is different so that the value of IFS
used when IFS is modified during expansion (${IFS:=...}, ${IFS=...} or
$((...IFS=...))) may be different. Note that this order is highly unportable
between shells.
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
This simplifies the code (e.g. allowing use of qsort(3) instead of a
hand-rolled mergesort) and should have better cache properties.
The waste of unused args arrays after resizes is approximately the same as
the savings from getting rid of the next pointers.
At the same time, remove a piece of global state and move some duplicated
code into a function.
Shell syntax is too complicated to detect command substitution and unquoted
operators reliably without implementing much of sh's parser. Therefore, have
sh do this detection.
While changing sh's support anyway, also read input from a pipe instead of
arguments to avoid {ARG_MAX} limits and improve privacy, and output count
and length using 16 instead of 8 digits.
The basic concept is:
execl("/bin/sh", "sh", "-c", "freebsd_wordexp ${1:+\"$1\"} -f "$2",
"", flags & WRDE_NOCMD ? "-p" : "", <pipe with words>);
The WRDE_BADCHAR error is still implemented in libc. POSIX requires us to
fail strings containing unquoted braces with code WRDE_BADCHAR. Since this
is normally not a syntax error in sh, there is still a need for checking
code in libc, we_check().
The new we_check() is an optimistic check that all the characters
<newline> | & ; < > ( ) { }
are quoted. To avoid duplicating too much sh logic, such characters are
permitted when quoting characters are seen, even if the quoting characters
may themselves be quoted. This code reports all WRDE_BADCHAR errors; bad
characters that get past it and are a syntax error in sh return WRDE_SYNTAX.
Although many implementations of WRDE_NOCMD erroneously allow some command
substitutions (and ours even documented this), there appears to be code that
relies on its security (codesearch.debian.net shows quite a few uses).
Passing untrusted data to wordexp() still exposes a denial of service
possibility and a fairly large attack surface.
Reviewed by: wblock (man page only)
MFC after: 2 weeks
Relnotes: yes
Security: fixes command execution with wordexp(untrusted, WRDE_NOCMD)
POSIX requires this to prevent entering function definitions in history but
this implementation does nothing except retain the option's value. In ksh88,
function definitions were usually entered in the history file, even when
they came from ~/.profile and the $ENV file, to allow displaying their
definitions.
This is also the first option that does not have a letter.
The initial check for a matching ] was incorrect if a ] may be consumed by a
[:class:]. The subsequent loop assumed that there must be a ].
Remove the initial check and make the loop cope with a missing ].
Found with afl-fuzz.
MFC after: 1 week
An invalid substitution like ${var@} does not cause a parse error but is
stored in the intermediate representation, to be written as part of the
error message. If there is a CTL* byte in the stored part, this confuses
some code such as the code to skip an unused alternative such as in
${var-alternative}.
To keep things simple, do not store CTL* bytes.
Found with afl-fuzz.
MFC after: 1 week
The negative value was not expected and generated the low 8 bits as a byte,
which may be an invalid character encoding.
The final shift in creating the negative value was undefined as well.
Make the temporary variable unsigned to fix this.
Fix shifts of possibly negative numbers found with ubsan and avoid signed
integer overflow when hashing an extremely long command name.
MFC after: 1 week
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
interactive.
I added the interactive check in r208881 to be safe, but in actual use
(scripts in set -m mode) passing along SIGINT seems best.
Discussed with: bdrewery
The parser considered 'trap exit INT' to reset the default for both EXIT and
INT. This beahvior is not POSIX compliant. This was avoided if a value was
specified for 'exit', but then disallows exiting with the signal received. A
possible workaround is using ' exit'.
However POSIX does allow this type of behavior if the parameters are all
integers. Fix the handling for this and clarify its support in the manpage
since it is specifically allowed by POSIX.
Differential Revision: https://reviews.freebsd.org/D2325
Reviewed by: jilles
MFC after: 2 weeks
EXP_REDIR was supposed to generate pathnames in redirection if exactly one
file matches, as permitted but not required by POSIX in interactive mode. It
is unlikely this will be implemented.
No functional change is intended.
MFC after: 1 week
Commands like 'export -p', 'set' and 'trap', and tracing enabled via 'set
-x' generate output suitable as shell input by adding quotes as necessary.
If there are control characters other than newline or invalid UTF-8
sequences, use $'...' and \OOO to display them safely.
The resulting output is not parsable by a strict POSIX.1-2008 shell but sh
from FreeBSD 9.0 and newer and many other shells can parse it.
Per Austin Group issue #459, shifting zero positional parameters may or may
not be considered an operand error (which causes the shell to exit in most
cases).
EXP_REDIR was not being checked for while expanding positional parameters in
redirection, so CTL* bytes were not being prefixed where they should be.
MFC after: 1 week
POSIX does not permit to continuing a getopts loop with different
arguments. For parsing the positional parameters, we handle this case by
resetting the getopts state when the positional parameters are changed in
any way (and the getopts state is local to a function). However, in the
syntax getopts <optstring> <var> <arg...>, changes could lead to invalid
memory access.
In the syntax getopts <optstring> <var> <arg...>, store a copy of the
arguments and continue to use them until getopts is reset.
These paths have had to be adjusted to changes in the testsuite runner
several times, so modify the tests to remove the need for such adjustment.
A cp in functional_test.sh is now unneeded, but this matters little in
performance.
In C, shift distances equal to or larger than the number of bits in the
operand result in undefined behaviour. As part of eliminating undefined
behaviour in arithmetic, mask off the distance like Java and JavaScript
specify and C on x86 usually does.
Assumption: conversion from unsigned to signed retains the two's complement
bits.
Assumption: uintmax_t has no padding bits.
The new code uses a "test discovery mechanism" to determine
what tests are available for execution
The test shell can be specified via:
kyua test -v test_suites.FreeBSD.bin.sh.test_shell=/path/to/test/sh
Sponsored by: EMC / Isilon Storage Division
Approved by: jmmv (mentor)
Reviewed by: jilles (maintainer)
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
Currently, there can be no more than INT_MAX positional parameters. Make
sure to treat all higher ones as unset to avoid incorrect results and
crashes.
On 64-bit systems, our atoi() takes the low 32 bits of the strtol() and
sign-extends them.
On 32-bit systems, the call to atoi() returned INT_MAX for too high values
and there is not enough address space for so many positional parameters, so
there was no issue.
Although it is probably unwise to use this, POSIX is clear that leading
zeroes are permitted in positional parameters (and do not indicate octal).
Such positional parameters are checked for being unset and/or null
correctly, but their value is incorrectly expanded.
The test locale1.0 depends on locale support; it is meaningless without a
working LC_MESSAGES.
I added an OptionalObsoleteFiles.inc entry.
PR: 181151
Submitted by: Garrett Cooper (original version)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
When getopts finds an invalid option or a missing option-argument, it should
not reset its state and should set OPTIND as normal. This is an old ash bug
that was fixed long ago in dash. Our behaviour now matches most other
shells.
Only store exit status for a process if that process has not terminated yet.
Test (slow):
exit 7 & p1=$!; until exit 8 & p2=$!; [ "$p1" = "$p2" ]; do wait "$p2";
done; sleep 0.1; wait %1; echo $?
should write "7".
When killing a %job started without job control, kill all processes in it.
As with process groups and zombies, if any process in the job can be killed
or has already terminated, the command is successful.
This also fixes occasional failures of the builtins/kill1.0 test.
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
If a job has terminated but is still known, silently do nothing when using
the kill builtin with the job specifier. Formerly, the shell called kill()
with the process group ID that might have been reused.
Redo expari() like evalvar(). This makes the logic more understandable and
avoids possible problems if arithmetic expansion occurs if CTLESC characters
are not generated (looking backwards for CTLARI is not generally possible in
that case but the old code tried anyway).
This adds an extra argstr() recursion.
If an alias's value ends with a space or tab, the next word is also
checked for aliases.
This is a POSIX feature. It is useful with utilities like command and
nohup (alias them to themselves followed by a space).
