- `sound'
The generic sound driver, always required.
- `snd_*'
Device-dependent drivers, named after the sound module names.
Configure accordingly to your hardware.
In addition, rename the `snd_pcm' module to `sound' in order to sync
with the driver names.
Suggested by: cg
Most of the changes are a direct result of adding thread awareness.
Typically, DDB_REGS is gone. All registers are taken from the
trapframe and backtraces use the PCB based contexts. DDB_REGS was
defined to be a trapframe on all platforms anyway.
Thread awareness introduces the following new commands:
thread X switch to thread X (where X is the TID),
show threads list all threads.
The backtrace code has been made more flexible so that one can
create backtraces for any thread by giving the thread ID as an
argument to trace.
With this change, ia64 has support for breakpoints.
bootp -> BOOTP
bootp.nfsroot -> BOOTP_NFSROOT
bootp.nfsv3 -> BOOTP_NFSV3
bootp.compat -> BOOTP_COMPAT
bootp.wired_to -> BOOTP_WIRED_TO
- i.e. back out the previous commit. It's already possible to
pxeboot(8) with a GENERIC kernel.
Pointed out by: dwmalone
BOOTP -> bootp
BOOTP_NFSROOT -> bootp.nfsroot
BOOTP_NFSV3 -> bootp.nfsv3
BOOTP_COMPAT -> bootp.compat
BOOTP_WIRED_TO -> bootp.wired_to
This lets you PXE boot with a GENERIC kernel by putting this sort of thing
in loader.conf:
bootp="YES"
bootp.nfsroot="YES"
bootp.nfsv3="YES"
bootp.wired_to="bge1"
or even setting the variables manually from the OK prompt.
FAT32 filesystems to be mounted, subject to some fairly serious limitations.
This works by extending the internal pseudo-inode-numbers generated from
the file's starting cluster number to 64-bits, then creating a table
mapping these into arbitrary 32-bit inode numbers, which can fit in
struct dirent's d_fileno and struct vattr's va_fileid fields. The mappings
do not persist across unmounts or reboots, so it's not possible to export
these filesystems through NFS. The mapping table may grow to be rather
large, and may grow large enough to exhaust kernel memory on filesystems
with millions of files.
Don't enable this option unless you understand the consequences.
This class is used for detecting volume labels on file systems:
UFS, MSDOSFS (FAT12, FAT16, FAT32) and ISO9660.
It also provide native labelization (there is no need for file system).
g_label_ufs.c is based on geom_vol_ffs from Gordon Tetlow.
g_label_msdos.c and g_label_iso9660.c are probably hacks, I just found
where volume labels are stored and I use those offsets here,
but with this class it should be easy to do it as it should be done by
someone who know how.
Implementing volume labels detection for other file systems also should
be trivial.
New providers are created in those directories:
/dev/ufs/ (UFS1, UFS2)
/dev/msdosfs/ (FAT12, FAT16, FAT32)
/dev/iso9660/ (ISO9660)
/dev/label/ (native labels, configured with glabel(8))
Manual page cleanups and some comments inside were submitted by
Simon L. Nielsen, who was, as always, very helpful. Thanks!
namespace. This is to allow decoupling of attachments from ACPI where they
need some functionality when ACPI is present but do not want to require ACPI
to always be loaded.
Reduce the need for hard coded *devs in various makefiles by declaring
them before-depend.
Other bugs in the handling of *devs remain, but this is the start of
the cleanup. These will be address in future commits.
Cleanup Motivator: bde
originated on RELENG_4 and was ported to -CURRENT.
The scoreboarding code was obtained from OpenBSD, and many
of the remaining changes were inspired by OpenBSD, but not
taken directly from there.
You can enable/disable sack using net.inet.tcp.do_sack. You can
also limit the number of sack holes that all senders can have in
the scoreboard with net.inet.tcp.sackhole_limit.
Reviewed by: gnn
Obtained from: Yahoo! (Mohan Srinivasan, Jayanth Vijayaraghavan)
- Split the code out into if_clone.[ch].
- Locked struct if_clone. [1]
- Add a per-cloner match function rather then simply matching names of
the form <name><unit> and <name>.
- Use the match function to allow creation of <interface>.<tag>
vlan interfaces. The old way is preserved unchanged!
- Also the match function to allow creation of stf(4) interfaces named
stf0, stf, or 6to4. This is the only major user visible change in
that "ifconfig stf" creates the interface stf rather then stf0 and
does not print "stf0" to stdout.
- Allow destroy functions to fail so they can refuse to delete
interfaces. Currently, we forbid the deletion of interfaces which
were created in the init function, particularly lo0, pflog0, and
pfsync0. In the case of lo0 this was a panic implementation so it
does not count as a user visiable change. :-)
- Since most interfaces do not need the new functionality, an family of
wrapper functions, ifc_simple_*(), were created to wrap old style
cloner functions.
- The IF_CLONE_INITIALIZER macro is replaced with a new incompatible
IFC_CLONE_INITIALIZER and ifc_simple consumers use IFC_SIMPLE_DECLARE
instead.
Submitted by: Maurycy Pawlowski-Wieronski <maurycy at fouk.org> [1]
Reviewed by: andre, mlaier
Discussed on: net
Version 3.5 brings:
- Atomic commits of ruleset changes (reduce the chance of ending up in an
inconsistent state).
- A 30% reduction in the size of state table entries.
- Source-tracking (limit number of clients and states per client).
- Sticky-address (the flexibility of round-robin with the benefits of
source-hash).
- Significant improvements to interface handling.
- and many more ...
your (network) modules as well as any userland that might make sense of
sizeof(struct ifnet).
This does not change the queueing yet. These changes will follow in a
seperate commit. Same with the driver changes, which need case by case
evaluation.
__FreeBSD_version bump will follow.
Tested-by: (i386)LINT
conform to the rfc2734 and rfc3146 standard for IP over firewire and
should eventually supercede the fwe driver. Right now the broadcast
channel number is hardwired and we don't support MCAP for multicast
channel allocation - more infrastructure is required in the firewire
code itself to fix these problems.
all of the interface between the driver and the bus. This will enable
us to stop special casing eisa bus attachments in modules and treat them
like we treat all other busses.
In the longer run, we need to eliminate much (all?) of these interfaces
and switch to using the standard bus_alloc_resource(), but that's not
done right now.
# I've not updated the modules to include eisa, etc, just yet
Tested on: Compaq Proliant 3000/333 purchased for eisa work
mbuma is an Mbuf & Cluster allocator built on top of a number of
extensions to the UMA framework, all included herein.
Extensions to UMA worth noting:
- Better layering between slab <-> zone caches; introduce
Keg structure which splits off slab cache away from the
zone structure and allows multiple zones to be stacked
on top of a single Keg (single type of slab cache);
perhaps we should look into defining a subset API on
top of the Keg for special use by malloc(9),
for example.
- UMA_ZONE_REFCNT zones can now be added, and reference
counters automagically allocated for them within the end
of the associated slab structures. uma_find_refcnt()
does a kextract to fetch the slab struct reference from
the underlying page, and lookup the corresponding refcnt.
mbuma things worth noting:
- integrates mbuf & cluster allocations with extended UMA
and provides caches for commonly-allocated items; defines
several zones (two primary, one secondary) and two kegs.
- change up certain code paths that always used to do:
m_get() + m_clget() to instead just use m_getcl() and
try to take advantage of the newly defined secondary
Packet zone.
- netstat(1) and systat(1) quickly hacked up to do basic
stat reporting but additional stats work needs to be
done once some other details within UMA have been taken
care of and it becomes clearer to how stats will work
within the modified framework.
From the user perspective, one implication is that the
NMBCLUSTERS compile-time option is no longer used. The
maximum number of clusters is still capped off according
to maxusers, but it can be made unlimited by setting
the kern.ipc.nmbclusters boot-time tunable to zero.
Work should be done to write an appropriate sysctl
handler allowing dynamic tuning of kern.ipc.nmbclusters
at runtime.
Additional things worth noting/known issues (READ):
- One report of 'ips' (ServeRAID) driver acting really
slow in conjunction with mbuma. Need more data.
Latest report is that ips is equally sucking with
and without mbuma.
- Giant leak in NFS code sometimes occurs, can't
reproduce but currently analyzing; brueffer is
able to reproduce but THIS IS NOT an mbuma-specific
problem and currently occurs even WITHOUT mbuma.
- Issues in network locking: there is at least one
code path in the rip code where one or more locks
are acquired and we end up in m_prepend() with
M_WAITOK, which causes WITNESS to whine from within
UMA. Current temporary solution: force all UMA
allocations to be M_NOWAIT from within UMA for now
to avoid deadlocks unless WITNESS is defined and we
can determine with certainty that we're not holding
any locks when we're M_WAITOK.
- I've seen at least one weird socketbuffer empty-but-
mbuf-still-attached panic. I don't believe this
to be related to mbuma but please keep your eyes
open, turn on debugging, and capture crash dumps.
This change removes more code than it adds.
A paper is available detailing the change and considering
various performance issues, it was presented at BSDCan2004:
http://www.unixdaemons.com/~bmilekic/netbuf_bmilekic.pdf
Please read the paper for Future Work and implementation
details, as well as credits.
Testing and Debugging:
rwatson,
brueffer,
Ketrien I. Saihr-Kesenchedra,
...
Reviewed by: Lots of people (for different parts)
been developed for use with FreeBSD, version 4.8 and later.
Submitted by: Hema Joyce
Reviewed by: Prafulla Deuskar
Approved by: Prafulla Deuskar
MFC after: 1 week
converts miidevs to a .h file, so rename to reflect that.
The usb and pccard versions have also been renamed and will be hooked
into the build system shortly (I've made the conversion in my p4
tree).
- Connect geom_stripe and geom_nop modules to the build.
- Connect STRIPE and NOP classes to the LINT build.
- Disconnect gconcat(8) from the build.
Supported by: Wheel - Open Technologies - http://www.wheel.pl
parameter).
Keep using it only in the i386 NOTES for now. It is fairly MI, but it
doesn't use bus-space and has a couple of i386 i/o instructions in pci
intitialization.
The VIA Nehemias is so obviously specific to i386 that it should not
be compiled on non-i386 platforms. The obviousness is in the fact that
all functions in nehemias.c are purely i386 inline assembly, guarded
by #ifdef __i386__
can more easily be used INSTEAD OF the hard-working Yarrow.
The only hardware source used at this point is the one inside
the VIA C3 Nehemiah (Stepping 3 and above) CPU. More sources will
be added in due course. Contributions welcome!
