* When receiving a Proactive PREQ dont return after processing it but propagate;
* When we propagate we should not enforce ratechecking;
* Added checking for multiple pred ID detection;
* Storing proxy orig address when PREQ is not for us;
Approved by: adrian
* Moved hs_lastpreq to be hr_lastpreq cause this rate check should be per
target mesh STA according to amendment (NB: not applicable for PERR);
* Modified hwmp_send_preq to use two extra arguments for last sent PREQ and
minimum PREQ interval;
* hwmp_send_preq is called with last two arguments equal to NULL when sending
Proactive PREQs cause the call back task enforces the rate check;
Approved by: adrian
* Added assertion in mesh_rt_update;
* Fixed some prep propagation that where multicast, ALL PREPS ARE UNICAST;
* Fixed PREP acceptance criteria;
* Fixed some PREP debug messages;
* HWMP intermediate reply (PREP) should only be sent if we have newer
forwarding infomration (FI) about target;
* Fixed PREP propagation condition and PREP w/ AE handling;
* Ignore PREPs that have unknown originator.
* Removed old code inside PREP that was for proactive path building
to root mesh;
Other errors include:
* use seq number of target and not orig mesh STA;
* Metric is what we have stored in our FI;
* Error in amendment, Hop count is not 0 but equals FI hopcount for target;
Approved by: adrian
* In mesh_recv_indiv_data_to_fwd update route entry for both meshDA and meshSA;
* In mesh_recv_indiv_data_to_me update route entry for meshSA;
* in ieee80211_mesh_rt_update put code so that a proxy entry that is gated
by us (number of hops == 0) is never invalidated;
* Fixed so that we always call ieee80211_mesh_rt_update with lifetime in ms;
Approved by: adrian
* Modified HWMP PREP/PREQ to contain a proxy entry and also changed PREP
frame processing according to amendment as following:
o Fixed PREP to always update/create if acceptance criteria is meet;
o PREQ processing to reply if request is for a proxy entry that is
proxied by us;
o Removed hwmp_discover call from PREQ, because sending a PREP will
build the forward path, and by receving and accepting a PREQ we
have already built the reverse path (non-proactive code);
* Disabled code for pro-active in PREP for now (will make a separate patch for
pro-active HWMP routing later)
* Added proxy information for a Mesh route, mesh gate to use and proxy seqno;
* Modified ieee80211_encap according to amendment;
* Introduced Mesh control address extension enum and removed unused struct,
also rename some structure element names.
* Modified mesh_input and added mesh_recv_* that should verify and process mesh
data frames according to 9.32 Mesh forwarding framework in amendment;
* Modified mesh_decap accordingly to changes done in mesh control AE struct;
Approved by: adrian
* Introduced ieee80211_mesh_rt_update that updates a route with the
maximum(lifetime left, new lifetime);
* Modified ieee80211_mesh_route struct by adding a lock that will be used
by both ieee80211_mesh_rt_update and precursor code (added in future commit);
* Modified in ieee80211_hwmp.c HWMP code to use new ieee80211_mesh_rt_update;
* Modified mesh_rt_flush_invalid to use new ieee80211_mesh_rt_update;
* mesh_rt_flush also checks that lifetime == 0, this gives route discovery
a change to complete;
* Modified mesh_recv_mgmt case IEEE80211_FC0_SUBTYPE_BEACON:
when ever we received a beacon from a neighbor we update route lifetime;
Approved by: adrian
* Added IEEE80211_MESH_MAX_NEIGHBORS and it is set to 15, same as before;
* Modified mesh_parse_meshpeering_action to verify MPM frame and send
correct reason code for when a frame is rejected according to standard spec;
* Modified mesh_recv_action_meshpeering_* according to the standard spec;
* Modified mesh_peer_timeout_cb to always send CLOSE frame when in CONFIRMRCV
state according to the standard spec;
Approved by: adrian
* Old struct ieee80211_meshpeer_ie had wrong peer_proto field size;
* Added IEEE80211_MPM_* size macros;
* Created an enum for the Mesh Peering Protocol Identifier field according
to the standard spec and removed old defines;
* Abbreviated Handshake Protocol is not used by the standard anymore;
* Modified mesh_verify_meshpeer to use IEEE80211_MPM_* macros for verification;
* Modified mesh_parse_meshpeering_action to parse complete frame, also to parse
it according to the standard spec;
* Modified ieee80211_add_meshpeer to construct correct MPM frames according to
the standard spec;
Approved by: adrian
* Added new action category IEEE80211_ACTION_CAT_SELF_PROT which is used by 11s
for Mesh Peering Management;
* Updated Self protected enum Action codes to start from 1 instead of 0
according to the standard spec;
* Removed old and wrong action categories IEEE80211_ACTION_CAT_MESHPEERING;
* Modified ieee80211_mesh.c and ieee80211_action.c to use the new action
category code;
* Added earlier verification code in ieee80211_input;
Approved by: adrian
- fixed an incorrect lock status issue.
- fixed an incorrect lock issue of unionfs root vnode removed.
(pointed out by keith)
- fixed an infinity loop issue.
(pointed out by dumbbell)
- changed to do LK_RELEASE expressly when unlocked.
Submitted by: ozawa@ongs.co.jp
arge1 still works (it's the standalone PHY) but arge0 and the other switch
ports don't work. They're enumerated though, demonstrating that the
mdiobus abstraction is correctly working.
This is only done if the ARGE_MDIO option is included.
* Shuffle the arge MDIO bus into a separate device, that needs to be
probed early (use hint.argemdio.X.order=0)
* hint.arge.X.mdio now specifies which miiproxy to rendezvous with.
* Call MAC/MDIO bus init during MDIO attach, not arge attach.
This is done regardless:
* Shift the arge MAC and MDIO bus reset code into separate functions
and call it early during MDIO bus attach. It's required for
correct MDIO bus IO to occur on AR71xx/AR91xx devices.
* Remove the AR71xx/AR91xx centric assumption that there's only one
MDIO bus. The initial code mapped miibus0(arge0) and miibus1(arge1)
MII register operations to the MII0 (arge0) register space. The
AR724x (and later, upcoming chipsets) have two MDIO busses and
the second is very much in use.
TODO:
* since the multiphy behaviour has changed (where now a phymask of >1
PHY will still be enumerated), multiphy setups may be quite wrong.
I'll go and fix these so they still have a chance of working, at least.
until the switch PHY support appears in -HEAD.
Submitted by: Stefan Bethke <stb@lassitu.de>
MDIO/MII rendezvous proxy.
* Add an 'mdio' bus, which is the "IO" side of an MII bus (but by design
can be anything which implements the underlying register access API.)
* Add 'miiproxy' and 'mdioproxy', which provides a rendezvous mechanism
for MII busses to appear hanging off arbitrary busses (ie, that aren't
necessarily a traditional looking MII bus.)
MII busses can now hang off anything that implements an mdiobus.
For the AR71xx SoC, there's one MDIO bus but two MII busses. So to
properly support two or more real PHYs, this can be done:
# arge0 MDIO bus - there's no arge1 MDIO bus for AR71xx
hint.argemdio.0.at="nexus0"
hint.argemdio.0.maddr=0x19000000
hint.argemdio.0.msize=0x1000
hint.argemdio.0.order=0
# Create two mdioproxy instances
hint.mdioproxy.0.at="mdio0"
hint.mdioproxy.1.at="mdio0"
# .. and with a follow-up patch
hint.arge.0.mdio=mdioproxy0
hint.arge.1.mdio=mdioproxy0
TODO:
* Do a sweep or two and add appropriate locking in mdio/mdioproxy/miiproxy.
Submitted by: Stefan Bethke <stb@lassitu.de>
Reviewed by: ray
in the system-wide version of <stdlib.h> by wrapping the #include_next
<stdlib.h> within the scope of its own header protection. On FreeBSD this has
no effect, since both header protections are equivalent. However the GNU version
of <stdlib.h> implements a special header protection mechanism which allows it
to be included multiple times (in different modes).
Simply by moving the #include_next off the header protection, we allow
system-wide <stdlib.h> to implement its own protection policy, whichever that
may be.
include <file>:
Parse the contents of file before continuing with the current file.
includedir <dir>:
Parse the contents of every file in dir that ends in .conf before continuing
with the current file.
Any file or directory encountered while processing include or includedir
directives will be parsed exactly once, even if it is encountered multiple
times.
Reviewed by: kib, des
Approved by: des (mentor)
MFC after: 1 month
defined by the SNIA Common RAID Disk Data Format Specification v2.0.
Supports multiple volumes per array and multiple partitions per disk.
Supports standard big-endian and Adaptec's little-endian byte ordering.
Supports all single-layer RAID levels. Dual-layer RAID levels except
RAID10 are not supported now because of GEOM RAID design limitations.
Some work is still to be done, but the present code already manages basic
interoperation with RAID BIOS of the Adaptec 1430SA SATA RAID controller.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
them and commit separately.
1. Rewrite the way growfs(8) finds the device and mount point. This makes
it possible to use e.g. "growfs /mnt"; it's also used to display more
helpful messages.
2. Be more user-friendly, using descriptive messages, like this:
OK to grow filesystem on /dev/md0, mounted on /mnt, from 9.8GB to 20GB? [Yes/No]"
3. Allow to specify the size (-s option) just like with mdconfig(8), i.e. with
postfixes ("mdconfig -s 10g").
4. Reload read-only filesystem after growing.
Reviewed by: kib, mckusick (earlier version)
Sponsored by: The FreeBSD Foundation
hash elements, and a helper matched_symbol() which match the given hash
entry and request, performing needed type and version checks.
Based on dragonflybsd support for GNU hash by John Marino <draco marino st>
Reviewed by: kan
Tested by: bapt
MFC after: 2 weeks
when there is no timeout, because read(2) will return immediately if there
is no data waiting in the TCP buffer, causing fetch_read() to busy-loop on
slow connections.
MFC after: 3 weeks
Noticed by: Yanhui Shen <shen.elf@gmail.com>
The typical case was:
static __inline int
convert_ccl(FILE *fp, char * __restrict p, [...])
{
[...]
if (p == SUPPRESS_PTR) {
[...]
} else {
[...]
}
[...]
}
This qualifier says that the pointer is the only one at that time
pointing to the resource.
Here, clang considers that "p" will never match "SUPPRESS_PTR" and
optimize the if{} block out. This leads to segfaults in programs calling
vfscanf(3) and vfwscanf(3) with just the format string (no arguments
following it).
The following softwares were reported to abort with segmentation fault
and this patch fixes it:
o cmake
o smartd
o devel/ORBit2
dim@ opened an LLVM PR to discuss this clang optimization:
http://llvm.org/bugs/show_bug.cgi?id=12656
Tested by: bsam@
the queue is not 'lpc stop'-ed. In that situation `lpq' will
not display the status message to the user, and the operator
may think the queue is already stopped when it is not.
MFC after: 3 weeks
conversions. Both the specification and the documentation say the
width is interpreted as the max number of wide characters to read, but
the implementation was interpreting it as the number of bytes to convert.
(See also r105317.)
This change has security implications for any applications that depend
on the buggy behavior, but the impact in practice is probably nil.
Any such application would already be buggy on other platforms that
get the semantics right. Also, these conversions are rarely used;
%ls, %lc, and %l[ are more appropriate.
