members over shared library members. This modification causes the linker
to use the first definition it sees for a symbol instead of having
priorities based on the library type. This modification should allow
gdb to compile again.
Obtained from:
Email conversation with Paul Kranenbury, but implemented completely by
me. If it doesn't work, it's my fault not his.
default switches, template functions get EXTERNAL linkage in each file
in which they occur, causing multiple definition errors during
linking. The enclosed patch (from gnu.g++.bug) appears to solve the
problem (I enclose the accompanying message as well).
This patch fixes the multiply defined template functions bug
which was introduced in 2.6.1.
Submitted by: "Justin T. Gibbs" <gibbs@estienne.cs.berkeley.edu>
Obtained from: Jason Merrill at cygnus support on G++ mailing list
one is much more intelligent, not only that it would accept multiple
man page locations, it also behaves like ``make'' in that it will only
deal with cat pages that are out of date (by default).
Wolfram also wrote a man page for it.
Submitted by: wosch@cs.tu-berlin.de (Wolfram Schneider)
- Don't define NO_IMPLICIT_EXTERN_C here. It is already the default
(defined in i386/bsd.h).
- Don't lose the fixed comment about FUNCTION_PROFILER.
- Don't lose the define of NO_PROFILE_DATA.
Replace the unused define of COMMENT_BEGIN by the less-unused define
of ASM_COMMENT_START. COMMENT_BEGIN was only defined in i386-specific
files and was not used in any part of gcc-2.6.3. ASM_COMMENT_START
is defined for several targets and is used for stuff that we don't
support (dwarf).
stuff. I'd like to have it in CVS, and i figured that this might be
the best place to go.
Someone (phk?) could install it into /usr/local/bin on freefall, for
convenience.
Suggested by: phk
basic-block profiling:
1. use a .stabs(25) symbol to link all the data structures together with.
The regular method isn't safe for the kernel.
2. add a BB before the prologue and add a BB after the epilogue, this
alows us to find the length of any counted BB. This is a cheap and somewhat
reasonable measure of actual cost.
if a signal is received.
This fixes a bug where killing the process would cause a
"No manual entry for XXX" to be printed even if the manpage
was found.
first place and we were too long in finding out. Now we know, and the
damage is hard to fix. This is part one: ld will not link gcc dynamic,
if specified as "-lgcc".
Suggested by: dyson & davidg
disables dysfunctional disinformed namei's,
needlessly negating namei cache."
These hacks cuts the number futile attempts made by cc and ccp to find
cross-compilers and other weird stuff. A make of the BOOTFLP kernel
has 20% less namei calls now, that is from 30647 down to 24563 calls.
NetBSD ld code except for local changes for dlopen() and friends and
the hashing on the minor value of the shlibs. We should be binary
compatible now with all their libraries.
Obtained from: NetBSD
the same as the changes made in the repository. This is often seen by
people with remote CVS trees that have applied their local patches to the
master site. a 'cvs update' will show bogus conflicts.
Obtained from: CVS mailing list, Stig<stig@inse.com>
In diffutils 2.6 and 2.7, diff3 -A complains about identical overlapping
changes. They're different from the ancestor but not from each other...
Why bother? The patch below fixes this nonsense and preserves [B]ackwards
compatiblity with the -B flag (also --show-bogus-conflicts).
Party on...
Stig
i reported today earlier..tested and works OK..
( To those who want to experience bug try running aub
with old version of socket.ph and with new one or just any
perl script "requiring " <sys/socket.ph> or <sys/cdefs.ph> )
This is a ported/modified version of the yppush program from the
yps-0.21 package from the NYS project. This program is used to propagate
updated NIS maps from an NIS master to an NIS slave. It's normally invoked
by /var/yp/Makefile.
This version of yppush has been modified in the following ways:
- Cleared up several Linux/BSD incompatibilities, largely involving
header files.
- converted from GDBM to DB with extreme predjudice. (well, not really...)
- removed lots of ugly debugging code that really didn't do anyone any good.
- Fixed a couple of inaccurate/badly formatted error messages.
- Renamed some functions to avoid collisions with certain YP routines
hidden inside libc.
- Small signal handling kludge: Linux has different struct sigaction
that us.
- Incorporated some functions from the yps-0.21 library that yppush was
dependent on.
Like ypxfr, this works, but could use come cleaning up.
the version installed from /usr/share. It's hard to eliminate old versions
- few Makefiles have `uninstall' targets and sup/ctm tends to blow away
old Makefiles.
This Makefile needs more work. Stuff is built at install time...
Don't initialize CLEANFILES here. Many FONTFILES are sources and required
special clean rules to avoid cleaning.
Makefile.tty:
Initialize CLEANFILES. All tty FONTFILES are objects.
misfeature caused troubles when a program attempted to access a shlib
where one with a higher minor number has been hashed. Ldconfig does
only include the highest-numbered shlib anyway, so this is in no way a
limitation of generality.
Caution: after installing the new programs, your /var/run/ld.so.hints
needs to be rebuiult; run ldconfig again as it's done from /etc/rc.
perl setuid scripts don't work in 2.1-current for the same reason they were
not working in 1.1.5.1.
Perl 5 has the same "problem" of course.
We have almost POSIX saved uids but we must undefine the following symbols
in order to get setuid perl scripts :
Submitted by: roberto@blaise.ibp.fr (Ollivier Robert)
This might be useful for debugging applications that use a special LDT.
However, printing of all segment registers is currently broken.
Don't print "last exception: " before the FPU opcode and pc, etc. The
opcode and pc, etc., are for the last FPU _instruction_.
Pass the saved exception status word to print_387_status() so that the
exception(s) that caused or will cause a trap can be seen. The kernel
has supported this since 1.1 or before. The kernel still clobbers the
tag word if a trap occurs.
Remove unused null function clear_regs().
cvs is not being used effectively for gdb. Our old changes get clobbered
and our new changes are mixed with "vendor" changes in the same updates
so they will be difficult to untangle for the next release of gdb. The
revision logs get spammed for each release of gdb.
the wild, slippery orgy commence!
Gary Jennejohn, too studly for his own good, has finally come through with
the new, improved gdb 4.13. This gdb features:
o kgdb support - if this works (and I urge folks to test it), we can
finally purge the old and hateful version of kgdb from our source
tree.
o attach/detach support. See comments in README.FreeBSD for more
details.
o Well, it's newer. Our previous version was 4.11.
Comments and flames to gj, of course! :-)
Thanks, Gary. Much appreciated. The previous state of gdb/kgdb has been a
thorn in all of our sides for some time..
Submitted by: gj
warning handling and allows for link-time warnings with a modified
version of gas.
Note: Not all of the newer bits were updated such as some of the non-x86
machine-dependant code is relevant to FreeBSD right now.
Obtained from: NetBSD
Change a round to a truncate. Problem reported from Christoph Kukulies:
9.8 2 / p did an IOT trap.
There is one remaining problem.: 9.8 2 % p shows on other machines 1.8
but does here in the moment 1.
in getting mirror-2.3 to work with FreeBSD, i found that timelocal.pl has
a bug. a patch is included below. this needs to be applied to both
src/gnu/usr.bin/perl/lib/timelocal.pl and
src/usr.sbin/xntpd/scripts/monitoring/timelocal.pl
Submitted by: jmb
already C++ safe, or C++ header files.
This fixes the problem with parse errors in header files when compiling C++
files.
Recompiling libg++ also solves the undefined synbols problem.
Notice that the libgcc DOESN'T change number, because there are no
changes.
Also now the gnu2bmake stuff is synchronized again.
I commit this so that others can test too.
You might want to postpone any "make worlds" until tomorrow, to
avoid any problems I didn't see in the first pass.
Thanks to Bruce for rounding up our changes to gcc.
more like binaries. This is hard to do using a general rules because
the natural `.sh:' rule has a null suffix and null suffixes are broken.
(With 1.1.5's make they sometimes work and sometimes cause core dumps.
2.0's make has a botched fixed and they never work.)
profiling and wchar_t. Profiled libraries will shrink.
tm.h:
Our wchar_t is int, not unsigned short.
Always link statically if profiling.
Define all the SPECs together.
final.c, tm.h:
Don't emit unused profiling code and data.
aux-output.c:
Always preserve the PIC register if profiling.
aux-output.c, tm.h:
Implement FUNCTION_PROFILER_EPILOGUE (currently not used).
New:
tm.h:
Set the target defaults in the correct way.
I know that many of these entries are bogus and need to be revisited,
but let's get the tree working again for now and then do a pass through
looking at all the __FreeBSD__ entries, shall we?
GCC-2.6.1 COMES TO FREEBSD-current
----------------------------------
Everybody needs to 'make world'.
Oakland, Nov 2nd 1994. In a surprise move this sunny afternoon, the release-
engineer for the slightly delayed FreeBSD-2.0, Poul-Henning Kamp (28),
decided to pull in the new version 2.6.1 of the GNU C-compiler.
The new version of the compiler was release today at noon, and hardly 9
hours later it was committed into the FreeBSD-current source-repository.
"It's is simply because we have had too much trouble with the version 2.6.0
of the compiler" Poul-Henning told the FreeBSD-Gazette, "we took a gamble
when we decided to use that as our compiler for the 2.0 release, but it
seems to pay of in the end now" he concludes.
The move has not been discussed on the "core" list at all, and will come as
a surprise for most Poul-Hennings peers. "I have only discussed it with
Jordan [J. K. Hubbard, the FreeBSD's resident humourist], and we agreed that
we needed to do it, so ... I did it!". After a breath he added with a grin:
"My email will probably get an all time 'disk-full' now!".
This will bring quite a flag-day to the FreeBSD developers, the patch-file
is almost 1.4 Megabyte, and they will have to run "make world" to get
entirely -current again. "Too bad, but we just had to do this." Was
the only comment from Poul-Henning to these problems.
When asked how this move would impact the 2.0 release-date, Poul-Hennings
face grew dark, he mumbled some very Danish words while he moved his fingers
in strange geometrical patterns. Immediately something ecclipsed the Sun, a
minor tremor shook the buildings, and the temperature fell significantly.
We decided not to pursure the question.
-----------
JOB-SECTION
-----------
Are you a dedicated GCC-hacker ?
We BADLY need somebody to look at the 'freebsd' OS in gcc, sanitize it and
carry the patches back to the GNU people. In particular, we need to get
out of the "i386-only" spot we are in now. I have the stuff to take a
gnu-dist into bmake-form, and will do that part.
Please apply to phk@freebsd.org
No Novice Need Apply.
Perl's scripts are still trying to execute perl out of /usr/gnu/bin/perl.
The hack Larry was using for h2ph.1 doesn't work with the new macros, so
make it a real man page.
Also, we weren't building the .ph files, add them as an afterinstall rule
in the x2p subdirectory.
and /usr/share/perl (library). The latter was chosen as analogous to other
directories already present in /usr/share, like /usr/share/groff_font and
(particularly) /usr/share/mk.
