sys/vm/device_pager.c:
Protect the creation of the phys pager with non-NULL handle with the
phys_pager_mtx. Lookup of phys pager in the pagers list by handle is now
synchronized with its removal from the list, and phys_pager_mtx is put
before vm object lock in lock order. Dispose the phys_pager_alloc_lock
and tsleep calls, together with acquiring Giant, since phys_pager_mtx
now covers the same block.
Reviewed by: alc
Approved by: re (kensmith)
Without it some errors may left unnoticed and unhandeled
that will lead to hooks left in half-connected state.
Reviewed by: julian@
Approved by: re (kensmith), glebius (mentor)
- Remove unneeded WLOCK/UNLOCK of inp for getting TCB lock.
- Fix panic that may occur when freeing an assoc that has partial
delivery in progress (may dereference null socket pointer when
queuing partial delivery aborted notification)
- Some spacing and comment fixes.
- Fix address add handling to clear cached routes and source addresses
when peer acks the add in case the routing table changes.
Approved by: re@freebsd.org (Bruce Mah)
projected_offset against isn_offset to account for
wrap around.
Reviewed by: gnn, kmacy, silby
Submitted by: yusheng.huang@bluecoat.com
Approved by: re
MFC: 3 days
and newer CPUs (including Core 2 and Core / Core 2 based Xeons). The
driver attaches to each cpu device and creates a sysctl node in that
device's sysctl context (dev.cpu.N.temperature). When invoked, the
handler binds to the appropriate CPU to ensure a correct reading.
Submitted by: Rui Paulo <rpaulo@fnop.net>
Sponsored by: Google Summer of Code 2007
Tested by: des, marcus, Constantine A. Murenin, Ian FREISLICH
Approved by: re (kensmith)
MFC after: 3 weeks
% mount | grep home
/dev/ad4s1e on /home (ufs, local, noatime, soft-updates)
% mount -u -o atime /home
% mount | grep home
/dev/ad4s1e on /home (ufs, local, soft-updates)
Restore this behavior for on 7.x for the following mount options:
noatime, noclusterr, noclusterw, noexec, nosuid, nosymfollow
In addition, on 7.x, the following are equivalent:
mount -u -o atime /home
mount -u -o nonoatime /home
Ideally, when we introduce new mount options, we should avoid
options starting with "no". :)
Requested by: jhb
Reported by: Karol Kwiat <karol.kwiat gmail com>, Scott Hetzel <swhetzel gmail com>
Approved by: re (bmah)
Proxy commit for: rodrigc
Without this the PHY wouldn't work as expected. This should fix
dual-boot Windows XP machine where RealTek Windows drivers put the
PHY in power down mode during shutdown. The magic PHY register
accesses come from RealTek driver. No datasheets mention the magic
PHY registers.
In general, the PHY wakeup code should go into PHY driver. However it
seems that it only apply to RTL8169S single chip and it would be
another hack if we have rgephy(4) check what parent driver/chip model
is attached.
Reported by: lofi, Laurens Timmermans ( laurens AT timkapel DOT nl )
Tested by: lofi
Obtained from: RealTek FreeBSD driver
Approved by: re (Ken Smith)
- Don't leak the config lock if detach() fails due to the controller char
dev being open.
- Close a race between detach() and a process opening the controller char
dev.
MFC after: 1 week
Approved by: re (bmah)
Fix a resource allocation bug (explained by jhb on -acpi)
Thanks for Mike Tancsa for testing and helping track down the bug.
Approved by: re (kensmith)
MFC after: 3 weeks
detailed status on each of the backing subdisks. This allows userland
to see which subdisks are online, failed, missing, or a hot spare.
MFC after: 1 week
Approved by: re (bmah)
Reviewed by: sos
differ in their details with calls to a new function, ehci_hcreset(),
that performs the reset.
The original sequences either had no delay or a 1ms delay between
telling the controller to stop and asserting the controller reset
bit. One instance of the original reset sequence waited for the
controller to indicate that its reset was complete before continuing,
but the other two immediately let the subsequent code execute. The
latter is a problem on some hardware, because a read of the HCCPARAMS
register returns an incorrect value while the reset is in progress,
which triggers an infinite loop in ehci_pci_givecontroller(), which
hangs the system on shutdown.
The reset sequence in ehci_hcreset() starts with the most complete
instance from the original code, which contains a loop to wait for
the controller to indicate that its reset is complete. This appears
to be the correct thing to do according to "Enhanced Host Controller
Interface Specification for Universal Serial Bus" revision 1.0,
section 2.3.1. Add another loop to wait for the controller to
indicate that it has stopped before setting the HCRESET bit. This
is required by the section 2.3.1 in the specification, which says
that setting HCRESET before the controller has halted "will result
in undefined behaviour".
Reviewed by: imp (previous patch version without the extra wait loop)
Tested by: se (previous patch version without the extra wait loop)
Approved by: re (bmah)
MFC after: 1 week
o Revamp the PIC I/F to only abstract the PIC hardware. The
resource handling has been moved to nexus, where it belongs.
o Include EOI and MASK+EOI methods to the PIC I/F in support of
INTR_FILTER.
o With the allocation of interrupt resources and setup of
interrupt handlers in the common platform code we can delay
talking to the PIC hardware after enumeration of all devices.
Introduce a call to powerpc_intr_enable() in configure_final()
to achieve that and have powerpc_setup_intr() only program the
PIC when !cold.
o As a consequence of the above, remove all early_attach() glue
from the OpenPIC and Heathrow PIC drivers and have them
register themselves when they're found during enumeration.
o Decouple the interrupt vector from the interrupt request line.
Allocate vectors increasingly so that they can be used for
the intrcnt index as well. Extend the Heathrow PIC driver to
translate between IRQ and vector. The OpenPIC driver already
has the support for vectors in hardware.
Approved by: re (blanket)
- LK_RETRY prohibits vget() and vn_lock() to return error.
Remove associated code. [1]
- Properly use vhold() and vdrop() instead of their unlocked
versions, we are guaranteed to have the vnode's interlock
unheld. [1]
- Fix a pseudo-infinite loop caused by 64/32-bit arithmetic
with the same way used in modern NetBSD versions. [2]
- Reorganize tmpfs_readdir to reduce duplicated code.
Submitted by: kib [1]
Obtained from: NetBSD [2]
Approved by: re (tmpfs blanket)
- Respect cnflag and don't lock vnode always as LK_EXCLUSIVE [1]
- Properly lock around tn_vnode to avoid NULL deference
- Be more careful handling vnodes (*)
(*) This is a WIP
[1] by pjd via howardsu
Thanks kib@ for his valuable VFS related comments.
Tested with: fsx, fstest, tmpfs regression test set
Found by: pho's stress2 suite
Approved by: re (tmpfs blanket)
cr0-4, etc. Support should be added for other platforms that have a
different set of registers for system use.
Loosely based on: OpenBSD
Approved by: re
a test that assumes that char is signed by default and causes a
warning with GCC 4.2 on PowerPC.
A patch has been sent to the maintainer that addresses this.
Approved by: re (blanket)
of device pager in the pagers list by handle is now synchronized with
its removal from the list, and dev_pager_mtx is put before vm object
lock in lock order. Dispose the dev_pager_sx lock, since dev_pager_mtx
now covers the same block.
Noted by: kensmith
Reviewed by: alc
Approved by: re (kensmith)
(uio_offset < 0) since this can't happen. If this happens, then the
general code handles the problem safely (better than before for reading,
returning 0 (EOF) instead of the bogus errno EINVAL, and the same as
before for writing, returning EFBIG).
In msdosfs_read(), don't check for (uio_resid < 0). msdosfs_write()
already didn't check.
In msdosfs_read(), document in a comment our assumptions that the caller
passed a valid uio_offset and uio_resid. ffs checks using KASSERT(),
and that is enough sanity checking. In the same comment, partly document
there is no need to check for the EOVERFLOW case, unlike in ffs where this
case can happen at least in theory.
In msdosfs_write(), add a comment about why the checking of
(uio_resid == 0) is explicit, unlike in ffs.
In msdosfs_write(), check for impossibly large final offsets before
checking if the file size rlimit would be exceeded, so that we don't
have an overflow bug in the rlimit check and are consistent with ffs.
We now return EFBIG instead of EFBIG plus a SIGXFSZ signal if the final
offset would be impossibly large but not so large as to cause overflow.
Overflow normally gave the benign behaviour of no signal.
Approved by: re (kensmith) (blanket)
remove some parentheses; fix some whitespace errors; fix only one case of
a boolean comparison of a non-boolean).
Improve an error message by quoting ".", and by not printing large positive
values as negative ones.
Approved by: re (kensmith) (blanket)
