At the moment ctfconvert(1) does not do much with such CUs, but
that may not be true in the future, and we run ctfconvert on several
assembly files during the build.
X-MFC with: r334883
ctfconvert(1) is not designed to handle DWARF generated from such code,
and will generally fail in non-obvious ways. Use an explicit check to
help catch such potential failures.
Reported by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 2 weeks
d4a72f2386
During scans (scrubs or resilvers), it sorts the blocks in each transaction
group by block offset; the result can be a significant improvement. (On my
test system just now, which I put some effort to introduce fragmentation into
the pool since I set it up yesterday, a scrub went from 1h2m to 33.5m with the
changes.) I've seen similar rations on production systems.
Approved by: Alexander Motin
Obtained from: ZFS On Linux
Relnotes: Yes (improved scrub performance, with tunables)
Differential Revision: https://reviews.freebsd.org/D15562
https://github.com/illumos/illumos-gate/edit/master/usr/src/lib/libzfs/common/libzfs_sendrecv.c
Patch our version of it to quiesce warnings until someone decides to sync
up our code:
libzfs_sendrecv.c:2555:30: warning: format specifies type 'unsigned long'
but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
sprintf(guidname, "%lu", thisguid);
~~~ ^~~~~~~~
%llu
libzfs_sendrecv.c:2612:29: warning: format specifies type 'unsigned long'
but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
sprintf(guidname, "%lu", parent_fromsnap_guid);
~~~ ^~~~~~~~~~~~~~~~~~~~
%llu
libzfs_sendrecv.c:2645:29: warning: format specifies type 'unsigned long'
but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
sprintf(guidname, "%lu", parent_fromsnap_guid);
~~~ ^~~~~~~~~~~~~~~~~~~~
%llu
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D15325
The default provides output in the following form:
```
NAME SIZE ALLOC FREE CKPOINT EXPANDSZ FRAG CAP DEDUP
HEALTH ALTROOT
```
this corrects the man page.
Also submitted upstream as
https://github.com/openzfs/openzfs/pull/632/files (with slightly
different changes needed)
The change adds -t <name> option to zpool create and -t option to zpool
import in its form with an old name and a new name. This allows to
import (or create) a pool under a name that's different from its real,
permanent name without affecting that name. This is useful when working
with VM images or images of other physical systems if they happen to
have a ZFS pool with the same name as the host system.
The changes come from ZoL with some small tweaks.
The porting has been done by julian.
The change is being submitted to OpenZFS:
https://github.com/openzfs/openzfs/pull/600
Submitted by: julian
Reviewed by: smh
MFC after: 2 weeks
Sponsored by: Panzura (porting)
Differential Revision: https://reviews.freebsd.org/D14972
9280 Assertion failure while running removal_with_ganging test with 4K devices
illumos/illumos-gate@243952c7ee
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Matt Ahrens <Matt.Ahrens@delphix.com>
9235 rename zpool_rewind_policy_t to zpool_load_policy_t
illumos/illumos-gate@5dafeea3eb
We want to be able to pass various settings during import/open of a pool,
which are not only related to rewind. Instead of adding a new policy and
duplicate a bunch of code, we should just rename rewind_policy to a more
generic term like load_policy.
For instance, we'd like to set spa->spa_import_flags from the nvlist,
rather from a flags parameter passed to spa_import as in some cases we want
those flags not only for the import case, but also for the open case. One
such flag could be ZFS_IMPORT_MISSING_LOG (as used in zdb) which would
allow zfs to open a pool when logs are missing.
Reviewed by: Matt Ahrens <matt@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@8671400134
The idea of Storage Pool Checkpoint (aka zpool checkpoint) deals with
exactly that. It can be thought of as a “pool-wide snapshot” (or a
variation of extreme rewind that doesn’t corrupt your data). It remembers
the entire state of the pool at the point that it was taken and the user
can revert back to it later or discard it. Its generic use case is an
administrator that is about to perform a set of destructive actions to ZFS
as part of a critical procedure. She takes a checkpoint of the pool before
performing the actions, then rewinds back to it if one of them fails or puts
the pool into an unexpected state. Otherwise, she discards it. With the
assumption that no one else is making modifications to ZFS, she basically
wraps all these actions into a “high-level transaction”.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Serapheim Dimitropoulos <serapheim.dimitro@delphix.com>
8809 libzpool should leverage work done in libfakekernel
illumos/illumos-gate@f06dce2c1f
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andrew Stormont <astormont@racktopsystems.com>
We do not have libfakekernel, but need to reduce code divergence.
Rather than zeroing and reading into the a smaller union member the full
union size, just zero and read directly into the union.
No functional change intended.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
illumos/illumos-gate@edc8ef7d92
Reviewed by: C Fraire <cfraire@me.com>
Reviewed by: Andy Fiddaman <omnios@citrus-it.co.uk>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Author: Toomas Soome <tsoome@me.com>
In pursuit of improving performance on multi-core systems, we should
implements fanned out counters and use them to improve the performance of
some of the arc statistics. These stats are updated extremely frequently,
and can consume a significant amount of CPU time.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
Like r331073, eliminate a UB by fully initializing the struct with a designated
initializer. Note that the similar src_dtt is not fully used, so a similar
treatment was not absolutely required. I chose to leave it alone. It
wouldn't hurt to do the same thing, though.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
r323791 changed the return value of zpool_read_label. Error paths that
previously returned 0 began to return -1 instead. However, not all error
paths initialized errno. When adding vdevs to a very large pool, errno could
be prepopulated with ENOMEM, causing the operation to fail. Fix the bug by
setting errno=ENOENT in the case that no ZFS label is found.
PR: 226096
Submitted by: Nikita Kozlov
Reviewed by: avg
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D13088
It gets called by dmu_buf_init_user, which is inline but not static. So it
needs global linkage itself.
Reported by: GCC-6
MFC after: 17 days
X-MFC-With: 329722
8940 Sending an intra-pool resumable send stream may result in EXDEV
illumos/illumos-gate@544132fce3
"zfs send -t <token>" for an incremental send should be able to resume
successfully when sending to the same pool: a subtle issue in
zfs_iter_children() doesn't currently allow this.
Because resuming from a token requires "guid" -> "dataset" mapping
(guid_to_name()), we have to walk the whole hierarchy to find the right
snapshots to send.
When resuming an incremental send both source and destination live in the
same pool and have the same guid: this is where zfs_iter_children() gets
confused and picks up the wrong snapshot, so we end up trying to send an
incremental "destination@snap1 -> source@snap2" stream instead of
"source@snap1 -> source@snap2": this fails with an "Invalid cross-device
link" (EXDEV) error.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Author: loli10K <ezomori.nozomu@gmail.com>
9075 Improve ZFS pool import/load process and corrupted pool recovery
illumos/illumos-gate@6f7938128a
Some work has been done lately to improve the debugability of the ZFS pool
load (and import) process. This includes:
https://www.illumos.org/issues/7638: Refactor spa_load_impl into several functions
https://www.illumos.org/issues/8961: SPA load/import should tell us why it failed
https://www.illumos.org/issues/7277: zdb should be able to print zfs_dbgmsg's
To iterate on top of that, there's a few changes that were made to make the
import process more resilient and crash free. One of the first tasks during the
pool load process is to parse a config provided from userland that describes
what devices the pool is composed of. A vdev tree is generated from that config,
and then all the vdevs are opened.
The Meta Object Set (MOS) of the pool is accessed, and several metadata objects
that are necessary to load the pool are read. The exact configuration of the
pool is also stored inside the MOS. Since the configuration provided from
userland is external and might not accurately describe the vdev tree
of the pool at the txg that is being loaded, it cannot be relied upon to safely
operate the pool. For that reason, the configuration in the MOS is read early
on. In the past, the two configurations were compared together and if there was
a mismatch then the load process was aborted and an error was returned.
The latter was a good way to ensure a pool does not get corrupted, however it
made the pool load process needlessly fragile in cases where the vdev
configuration changed or the userland configuration was outdated. Since the MOS
is stored in 3 copies, the configuration provided by userland doesn't have to be
perfect in order to read its contents. Hence, a new approach has been adopted:
The pool is first opened with the untrusted userland configuration just so that
the real configuration can be read from the MOS. The trusted MOS configuration
is then used to generate a new vdev tree and the pool is re-opened.
When the pool is opened with an untrusted configuration, writes are disabled
to avoid accidentally damaging it. During reads, some sanity checks are
performed on block pointers to see if each DVA points to a known vdev;
when the configuration is untrusted, instead of panicking the system if those
checks fail we simply avoid issuing reads to the invalid DVAs.
This new two-step pool load process now allows rewinding pools accross
vdev tree changes such as device replacement, addition, etc. Loading a pool
from an external config file in a clustering environment also becomes much
safer now since the pool will import even if the config is outdated and didn't,
for instance, register a recent device addition.
With this code in place, it became relatively easy to implement a
long-sought-after feature: the ability to import a pool with missing top level
(i.e. non-redundant) devices. Note that since this almost guarantees some loss
Of data, this feature is for now restricted to a read-only import.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Approved by: Hans Rosenfeld <rosenfeld@grumpf.hope-2000.org>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@add927f8c8
Reported on the ZFSonLinux https://github.com/zfsonlinux/zfs/issues/4843,
fixed by https://github.com/zfsonlinux/zfs/pull/6339:
If we are in the middle of an incremental zfs receive, the child .../%recv
will exist. If you concurrently run zfs promote .../%recv, it will "work",
but then zfs gets confused. For example, there's no obvious way to destroy
the containing filesystem (because it is now a clone of its invisible child).
Attempting to do this promote should be an error. We could fix this by
having zfs_ioc_promote() check if zc_name contains a %, similar to
zfs_ioc_rename().
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: loli10K <ezomori.nozomu@gmail.com>
illumos/illumos-gate@e144c4e6c9
Currently `zdb` consistently fails to examine non-idle pools as it fails
during the `spa_load()` process. The main problem seems to be that
`spa_load_verify()` fails as can be seen below:
$ sudo zdb -d -G dcenter
zdb: can't open 'dcenter': I/O error
ZFS_DBGMSG(zdb):
spa_open_common: opening dcenter
spa_load(dcenter): LOADING
disk vdev '/dev/dsk/c4t11d0s0': best uberblock found for spa dcenter. txg 40824950
spa_load(dcenter): using uberblock with txg=40824950
spa_load(dcenter): UNLOADING
spa_load(dcenter): RELOADING
spa_load(dcenter): LOADING
disk vdev '/dev/dsk/c3t10d0s0': best uberblock found for spa dcenter. txg 40824952
spa_load(dcenter): using uberblock with txg=40824952
spa_load(dcenter): FAILED: spa_load_verify failed [error=5]
spa_load(dcenter): UNLOADING
This change makes `spa_load_verify()` a dryrun when ran from `zdb`. This is
done by creating a global flag in zfs and then setting it in `zdb`.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@36a64e6284
To prevent kmem_cache reaping from blocking other system resources, turn
kmem_cache_reap_now() (which blocks) into kmem_cache_reap_soon(). Callers
to kmem_cache_reap_soon() should use kmem_cache_reap_active(), which
exploits #9017's new taskq_empty().
Reviewed by: Bryan Cantrill <bryan@joyent.com>
Reviewed by: Dan McDonald <danmcd@joyent.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Yuri Pankov <yuripv@yuripv.net>
Author: Tim Kordas <tim.kordas@joyent.com>
FreeBSD does not use taskqueue for kmem caches reaping, so this change
is less dramatic then it is on Illumos, just limiting reaping to 1 time
per second. It may possibly be improved later, if needed.
illumos/illumos-gate@5cabbc6b49https://www.illumos.org/issues/7614:
This project allows top-level vdevs to be removed from the storage pool with
“zpool remove”, reducing the total amount of storage in the pool. This
operation copies all allocated regions of the device to be removed onto other
devices, recording the mapping from old to new location. After the removal is
complete, read and free operations to the removed (now “indirect”) vdev must
be remapped and performed at the new location on disk. The indirect mapping
table is kept in memory whenever the pool is loaded, so there is minimal
performance overhead when doing operations on the indirect vdev.
The size of the in-memory mapping table will be reduced when its entries
become “obsolete” because they are no longer used by any block pointers in
the pool. An entry becomes obsolete when all the blocks that use it are
freed. An entry can also become obsolete when all the snapshots that
reference it are deleted, and the block pointers that reference it have been
“remapped” in all filesystems/zvols (and clones). Whenever an indirect block
is written, all the block pointers in it will be “remapped” to their new
(concrete) locations if possible. This process can be accelerated by using
the “zfs remap” command to proactively rewrite all indirect blocks that
reference indirect (removed) vdevs.
Note that when a device is removed, we do not verify the checksum of the data
that is copied. This makes the process much faster, but if it were used on
redundant vdevs (i.e. mirror or raidz vdevs), it would be possible to copy
the wrong data, when we have the correct data on e.g. the other side of the
mirror. Therefore, mirror and raidz devices can not be removed.
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Approved by: Garrett D'Amore <garrett@damore.org>
Author: Prashanth Sreenivasa <pks@delphix.com>
illumos/illumos-gate@95643f75d295643f75d2https://www.illumos.org/issues/8520
lzc_rollback_to() should support rolling back to a clone's origin.
The current checks in zfs_ioc_rollback() would not allow that because the
origin snapshot belongs to a different filesystem.
The overly restrictive check was introduced in 7600, but it was not a
regression as none of the existing tools provided a way to rollback to the
origin.
https://www.illumos.org/issues/7198
EINVAL is returned when a dataset does not have any snapshots, so there is
nothing to roll back to.
Although the code in zfs_do_rollback checks for that condition in advance, it's
still possible that the snapshot(s) gets removed after the check and before the
rollback sync task is executed.
At the moment zfs command would crash when that happens.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@7855d95b307855d95b30https://www.illumos.org/issues/7446
Since we support whole-disk configuration for boot pool, we also will need
whole disk support with UEFI boot and for this, zpool create should create efi-
system partition.
I have borrowed the idea from oracle solaris, and introducing zpool create -
B switch to provide an way to specify that boot partition should be created.
However, there is still an question, how big should the system partition be.
For time being, I have set default size 256MB (thats minimum size for FAT32
with 4k blocks). To support custom size, the set on creation "bootsize"
property is created and so the custom size can be set as: zpool create B -
o bootsize=34MB rpool c0t0d0
After pool is created, the "bootsize" property is read only. When -B switch is
not used, the bootsize defaults to 0 and is shown in zpool get output with
value ''. Older zfs/zpool implementations are ignoring this property.
https://www.illumos.org/rb/r/219/
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Dan McDonald <danmcd@kebe.com>
Author: Toomas Soome <tsoome@me.com>
This commit makes no sense for FreeBSD, that is why I blocked the option,
but it should be good to stay closer to upstream.
illumos/illumos-gate@d8584ba6fbd8584ba6fbhttps://www.illumos.org/issues/7990
The snapspec_cb() callback function in libzfs does not need to call zfs_strdup().
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Matthew Ahrens <mahrens@delphix.com>
Author: Marcel Telka <marcel@telka.sk>
illumos/illumos-gate@7c13517fff7c13517fffhttps://www.illumos.org/issues/7745
The problem is that consumers of `libZFS_Core` that forget to call
`libzfs_core_init()` before calling any other function of the library
are having a hard time realizing their mistake. The library's internal
file descriptor is declared as global static, which is ok, but it is not
initialized explicitly; therefore, it defaults to 0, which is a valid
file descriptor. If `libzfs_core_init()`, which explicitly initializes
the correct fd, is skipped, the ioctl functions return errors that do
not have anything to do with `libZFS_Core`, where the problem is
actually located.
Even though assertions for that existed within `libZFS_Core` for debug
builds, they were never enabled because the `-DDEBUG` flag was missing
from the compiler flags.
This patch applies the following changes:
1. It adds `-DDEBUG` for debug builds of `libZFS_Core` and `libzfs`,
to enable their assertions on debug builds.
2. It corrects an assertion within `libzfs`, where a function had
been spelled incorrectly (`zpool_prop_unsupported()`) and nobody
knew because the `-DDEBUG` flag was missing, and the preprocessor
was taking that part of the code away.
3. The library's internal fd is initialized to `-1` and `VERIFY`
assertions have been placed to check that the fd is not equal to
`-1` before issuing any ioctl. It is important here to note, that
the `VERIFY` assertions exist in both debug and non-debug builds.
4. In `libzfs_core_fini` we make sure to never increment the
refcount of our fd below 0, and also reset the fd to `-1` when no
one refers to it. The reason for this, is for the rare case that
the consumer closes all references but then calls one of the
library's functions without using `libzfs_core_init()` first, and
in the mean time, a previous call to `open()` decided to reuse
our previous fd. This scenario would have passed our assertion in
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
7604 if volblocksize property is the default, it displays as "-" rather than 8K
illumos/illumos-gate@4d86c0eab24d86c0eab2https://www.illumos.org/issues/7604
If a zvol has the default setting for the "volblocksize" property, it is
8KB. However, it is displayed as "-" (not present), rather than "8K".
The problem was introduced by:
commit 25228e830e86924a41243343b1de9daf2d7dd43a
Author: Matthew Ahrens <mahrens@delphix.com>
Date: Thu Nov 17 14:37:24 2016 -0800
7571 non-present readonly numeric ZFS props do not have default value
which changed changed get_numeric_property() to indicate that readonly
default properties are not present. However, zfs_prop_readonly() returns
TRUE for both readonly and set-once properties (e.g. volblocksize).
Amusingly, that commit essentially reverted:
6900484 default volblocksize is no longer being reported correctly
from November 2009. However, that change was not correct either; the
correct solution is to only do this check for "truly readonly" (i.e. not
setonce) properties.
$ zfs list -t volume -o name,volblocksize
NAME
VOLBLOCK
domain0/group-100/appdata_container-101/appdata_windows_timeflow-102/
archive -
domain0/group-100/appdata_container-101/appdata_windows_timeflow-102/
datafile -
domain0/group-100/appdata_container-101/appdata_windows_timeflow-102/
external -
rpool/dump
128K
rpool/swap
4K
rpool/swap1
===============================================================================
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@09c9e6dc9b09c9e6dc9bhttps://www.illumos.org/issues/7542
libshare keeps a cached copy of the sharetab listing in memory, which can
become out of date if shares are destroyed or created while leaving a libzfs
handle open. This results in a spurious unmounting failure when an NFS share
exists but isn't in the stale libshare cache.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Amdur <matt.amdur@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Chris Williamson <chris.williamson@delphix.com>
illumos/illumos-gate@873c4903a5873c4903a5https://www.illumos.org/issues/7336
We can run into a problem where we call into zfs_mount, which in turn calls
is_dir_empty, which opens the directory to try and make sure it's empty. The
issue with the current approach is that it holds the directory open while it
traverses it with readdir, which, due to subtle interaction with the Java JVM,
vfork, and exec can cause a tricky race condition resulting in zfs_mount
failures.
The approach to resolving the issue in this patch is to drop the usage of
readdir altogether, and instead rely on the fact that ZFS stores the number of
entries contained in a directory using the st_size field of the stat structure.
Thus, if the directory in question is a ZFS directory, we can check to see if
it's empty by calling stat() and inspecting the st_size field of structure
returned.
===============================================================================
The root cause appears to be an interesting race between vfork, exec, and
zfs_mount's usage of O_CLOEXEC when calling openat. Here's what is going on:
1. We call zfs_mount, and this in turn calls openat to check if the directory
is empty, which results in opening the directory we're trying to mount onto,
and increment v_count.
2. As we're in the middle of reading the directory, vfork is called by the JVM
and proceeds to exec the jspawnhelper utility. As a result of the vfork, we
take an additional hold on the directory, which increments v_count a second
time. The semantics of vfork mean the parent process will wait for the child
process to exit or exec before the parent can continue; at this point the
parent is in the middle of zfs_mount, reading the directory to determine if
it's empty or not.
3. The child process exec-ing jspawnhelper gets to the relvm call within
exec_args (which is called by exec_common). relvm is the function that releases
the parent process, allowing the parent to proceed. The problem is, at this
point of calling relvm, the child hasn't yet called close_exec which is
responsible for closing the file descriptors inherited from the parent process
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@d420209d9cd420209d9chttps://www.illumos.org/issues/7233
This fixes a race where one thread is executing zfs_mount() while another
thread forks and execs. If the fork occurs while the directory is open, the
child process will inherit (but not necessarily close immediately) the open fd
for the directory, preventing the mount.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Alex Reece <alex@delphix.com>
illumos/illumos-gate@c3c65d17f7c3c65d17f7https://www.illumos.org/issues/7502
Right now ztest executes zdb without -G, so when it has errors, the messages
are often not very helpful:
Executing zdb -bccsv -d -U /rpool/tmp/zpool.cache ztest
zdb: can't open 'ztest': Operation not supported
ztest: '/usr/sbin/amd64/zdb -bccsv -d -U /rpool/tmp/zpool.cache ztest' exit
code 1
With -G, we'd have:
/usr/sbin/amd64/zdb -bccsv -d -U /rpool/tmp/zpool.cache -G ztest
zdb: can't open 'ztest': Operation not supported
ZFS_DBGMSG(zdb):
spa_open_common: opening ztest
spa_load(ztest): LOADING
spa_load(ztest): FAILED: unable to parse config [error=48]
spa_load(ztest): UNLOADING
Which indicates where the error came from
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
illumos/illumos-gate@3f7978d02b3f7978d02bhttps://www.illumos.org/issues/8081
zdb(8) is full of minor problems that generate compiler warnings. On FreeBSD,
which uses -WError, the only way to build it is to disable all compiler
warnings. This makes it much harder to detect newly introduced bugs. We should
cleanup all the warnings.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Alan Somers <asomers@gmail.com>
8502 illumos#7955 broke delegated datasets when libshare is not present
illumos/illumos-gate@1c18e8fbd81c18e8fbd8https://www.illumos.org/issues/8502
The code in lib/libzfs/common/libzfs_mount.c already basically handles
the case when libshare is not installed. We just need to not fail in
zfs_init_libshare_impl. I tested this in lx and things work as
expected. I also tested there trying to set sharenfs and sharesmb on
the delegated dataset. Neither is allowed from within a zone. The
spew of msgs from a native zone is not ZFS specific. I see the same
spew simply running the share command.
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
Fix an assertion in zpool that causes a crash when running any "zpool add"
command on a spare that contains a replacing vdev with a spare child.
This likely affects Illumos, too.
PR: 225546
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D14138
illumos/illumos-gate@e9b7d6e7f7https://www.illumos.org/issues/8972:
'zfs holds -H' does not properly output content in scripted mode. It uses a
tab instead of two spaces, but it still pads column widths with spaces when
it should not.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Allan Jude <allanjude@freebsd.org>
illumos/illumos-gate@4ae5f5f06chttps://www.illumos.org/issues/8652:
Clang and GCC prefer to use unsigned ints to store enums. With Clang, that
causes tautological comparison warnings when comparing a zfs_prop_t or
zpool_prop_t variable to the macro ZPROP_INVAL. It's likely that error
handling code is being silently removed as a result.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alan Somers <asomers@gmail.com>
8641 "zpool clear" and "zinject" don't work on "spare" or "replacing" vdevs
illumos/illumos-gate@2ba5f978a4https://www.illumos.org/issues/8641:
"zpool clear" and "zinject -d" can both operate on specific vdevs, either
leaf or interior. However, due to an oversight, neither works on a "spare"
or "replacing" vdev. For example:
sudo zpool create foo raidz1 c1t5000CCA000081D61d0 c1t5000CCA000186235d0 spare c
1t5000CCA000094115d0
sudo zpool replace foo c1t5000CCA000186235d0 c1t5000CCA000094115d0
$ zpool status foo pool: foo
state: ONLINE
scan: resilvered 81.5K in 0h0m with 0 errors on Fri Sep 8 10:53:03 2017
config:
NAME STATE READ WRITE CKSUM
foo ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
c1t5000CCA000081D61d0 ONLINE 0 0 0
spare-1 ONLINE 0 0 0
c1t5000CCA000186235d0 ONLINE 0 0 0
c1t5000CCA000094115d0 ONLINE 0 0 0
spares
c1t5000CCA000094115d0 INUSE currently in use
$ sudo zinject -d spare-1 -A degrade foo
cannot find device 'spare-1' in pool 'foo'
$ sudo zpool clear foo spare-1
cannot clear errors for spare-1: no such device in pool
Even though there was nothing to clear, those commands shouldn't have
reported an error. by contrast, trying to clear "raidz1-0" works just fine:
$ sudo zpool clear foo raidz1-0
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alan Somers <asomers@gmail.com>
