Commit Graph

17 Commits

Author SHA1 Message Date
Scott Long
3df780cf76 Fix a couple of bugs with AIF handling:
- Correct the logic for the AIF array index pointers so that correct slot is
   always looked at.
 - Copy the full FIB payload size when copying AIF's, not just the first 64
   bytes.

Thanks to Mirapoint, Inc, for pointing these problems out and offering a
solution.
2003-10-17 21:44:06 +00:00
Scott Long
a6d35632f5 Begin support for 64-bit address support and workarounds for newer cards:
- Add data structuress for doing 64-bit scatter/gather
	- Move busdma tag creations around so that only the parent is
	  created in aac_pci.c.
	- Retrieve the capabilities word from the firmware before setting
	  up command structures and tags. This allows the driver to decide
	  whether to do 64-bit commands, and if work-arounds are needed for
	  systems with >2GB of RAM.
	- Only enable the SCSI passthrough if it's enabled in the capabilities
	  word in the firmware.

This should fix problems with the 2120S and 2200S cards in systems with more
than 2GB of RAM.  Full 64-bit support is forthcoming.

MFC-After:	1 week
2003-03-26 17:50:11 +00:00
Scott Long
f30ac74cb0 Major bugfixes for large memory and fast systems.
aac.c:
        Re-arrange the interrupt handler to optimize the common case of
        the adapter interrupting us because one or more commands are complete,
        and do a read across the pci bus to ensure that all posted status
        writes are flushed.  This should close a race that could cause command
        completion interrupts to be lost.
        Follow the spec a bit closer when filling out command structures.
        Enable the Fast Response feature to eliminate the need for the card
        to DMA successfull command completions back into host memory.
        Tell the controller how much physical memory we have.  Without this
        there was a chance that our DMA regions would collide with the
        memory window used by the cache on the controller.  The result would
        be massive data corruption.  This seemed to mainly affect systems with
        >2GB of memory.
        Fix a few whitespace problems.

aac_debug.c:
        Add an extra diagnostic when printing out commands.

aac_disk.c:
        Add extra sanity checks.

aacreg.h:
        Prepare for making this 64-bit clean by reducing the use of enumeration
        types in structures.

Many thanks to Justin Gibbs for helping track these down.
2003-01-11 01:59:21 +00:00
Alfred Perlstein
4f492bfab5 use __packed. 2002-09-23 18:54:32 +00:00
Tom Rhodes
d394511de3 More s/file system/filesystem/g 2002-05-16 21:28:32 +00:00
Scott Long
fe3cb0e1ec Add a CAM interface to the aac driver. This is useful in case you should
ever connect a SCSI Cdrom/Tape/Jukebox/Scanner/Printer/kitty-litter-scooper
to your high-end RAID controller.  The interface to the arrays is still
via the block interface; this merely provides a way to circumvent the
RAID functionality and access the SCSI buses directly.  Note that for
somewhat obvious reasons, hard drives are not exposed to the da driver
through this interface, though you can still talk to them via the pass
driver.  Be the first on your block to low-level format unsuspecting
drives that are part of an array!

To enable this, add the 'aacp' device to your kernel config.

MFC after:	3 days
2002-04-27 01:31:17 +00:00
Scott Long
cbfd045b10 Prepare for a major update to the aac driver:
Update the aac driver with the new crashdump api.
	Protect sync fibs with a mutex.
	Align all DMA buffers on a PAGE_SIZE boundary.

MFC after:	3 days
2002-04-24 05:12:50 +00:00
Scott Long
fe94b852b3 Don't attach to Dell PERC2/QC cards that have a firmware rev of 1.x. This
check is complicated by the fact that the Adaptec 5400S cards claim to use
1.x firmware also.  PERC2/QC 1.x firmware is not compatible with this driver
and will cause a system hang.

MFC after:	3 days
2002-02-06 01:34:09 +00:00
Scott Long
b3457b5173 Add functionality and fix bugs so the driver will work with soon-to-be
released management apps.

1.  Implement poll().  This will check for queued aif's so that a
    subsequent ioctl call to retrieve the next aif will not block.
2.  Don't catch signals when sleeping on a fib sent from userland.  This
    causes a race and panic due to the pthread context switcher waking
    up the tsleep at inopportune times.
3.  Fix some whitespace nits.

MFC after:	3 days
2001-12-02 03:47:33 +00:00
Scott Long
914da7d0d3 Bring the aac driver *much* closer to style(9).
Reviewed by:	ken
2001-09-05 20:43:02 +00:00
Scott Long
36e0bf6e9c Mega update to the aac driver.
1.  Correctly handle commands initiated by the adapter.  These commands
    are defered to a kthread responsible for their processing, then are
    properly returned to the controller.
2.  Add/remove disk devices when notified by the card that a container was
    created/deleted/offline.
3.  Implement crashdump functionality.
4.  Support all ioctls needed for the management CLI to work.  The linux
    version of this app can be found at the Dell or HP website.  A native
    version will be forthcoming.

MFC-after:	4.4-RELEASE
2001-08-29 23:34:05 +00:00
Scott Long
fadfef893f Fix a couple of copyright issues and an 80 column nit that I missed before 2001-08-05 06:15:00 +00:00
Scott Long
c6eafcf2c5 Reformat for 80 columns. Sorry, but I had to do it. 2001-08-03 00:50:30 +00:00
Mike Smith
0b94a66e3f Major bugfix and minor update. This should resolve the current issues
with the driver locking up under load.

 - Restructure so that we use a static pool of commands/FIBs, rather than
   allocating them in clusters.  The cluster allocation just made things
   more complicated, and allowed us to waste more memory in peak load
   situations.
 - Make queueing macros more like my other drivers.  This adds queue stats
   for free.  Add some debugging to take advantage of this.
 - Reimplement the periodic timeout scan.  Kick the interrupt handler
   and the start routine every scan as well, just to be safe.  Track busy
   commands properly.
 - Bring resource cleanup into line with resource allocation.  We should
   now clean up correctly after a failed probe/unload/etc.
 - Try to start new commands when old ones are completed.  We weren't doing
   this before, which could lead to deadlock when the controller was full.
 - Don't try to build a new command if we have found a deferred command.
   This could cause us to lose the deferred command.
 - Use diskerr() to report I/O errors.
 - Don't bail if the AdapterInfo structure is the wrong size.  Some variation
   seems to be normal.  We need to improve our handing of 2.x firmware sets.
 - Improve some comments in an attempt to try to make things clearer.
 - Restructure to avoid some warnings.
2000-12-27 13:14:56 +00:00
Mike Smith
84ad14e4a6 Fix up some more comments that were reversed.
Submitted by:	Niklas Hallqvist <niklas@appli.se>
2000-10-03 10:26:29 +00:00
Mike Smith
0791663f57 Fix reversed comments re: OISR/OIMR
Submitted by:	Niklas Hallqvist <niklas@appli.se>
2000-10-03 08:28:04 +00:00
Mike Smith
358637397e A new driver for PCI:SCSI RAID controllers based on the Adaptec FSA
design.  This includes integrated Dell RAID controllers, the Dell
PERC 2/QC and the HP NetRAID-4M.
2000-09-13 03:20:35 +00:00