from standard 3G wireless units by supplying a raw IP/IPv6 endpoint rather than
using PPP over serial. uhsoctl(1) is used to initiate and close the WAN
connection.
Obtained from: Fredrik Lindberg <fli@shapeshifter.se>
I've been so busy hacking on utmpx the last couple of days, out of
reflex, I committed it to the wrong source tree. Note to myself: don't
hack on FreeBSD while watching TV at the same time.
PR: conf/142578
Submitted by: Yuri Pankov <yuri pankov gmail com>
Reminded by: stefanf
While the name is pretentious, a good explanation of its targets is
reported in this 17 months old presentation e-mail:
http://lists.freebsd.org/pipermail/freebsd-arch/2008-August/008452.html
In order to implement it, the sq_type in sleepqueues is mandatory and not
only compiled along with INVARIANTS option. Additively, a new sleepqueue
function, sleepq_type() is added, returning the type of the sleepqueue
linked to a wchan.
Three new sysctls are added in order to configure the thread:
debug.deadlkres.slptime_threshold
debug.deadlkres.blktime_threshold
debug.deadlkres.sleepfreq
rappresenting the thresholds for sleep and block time that will lead to
a deadlock matching (when exceeded), while the sleepfreq rappresents the
number of seconds between 2 consecutive thread runnings.
In order to enable the deadlock resolver thread recompile your kernel
with the option DEADLKRES.
Reviewed by: jeff
Tested by: pho, Giovanni Trematerra
Sponsored by: Nokia Incorporated, Sandvine Incorporated
MFC after: 2 weeks
Unfortunately there are two slight problems with that:
- Yacc and lex might generate code that generates warnings because of
this. Require yacc and lex to be rebuilt during bootstrap. I'm not
incrementing __FreeBSD_version here, because I assume someone else
will do this eventually.
- When running `make buildkernel', it uses share/mk from the source
treeo to build aicasm. Because aicasm also depends on lex, this would
break. Lower WARNS to 5 for now. We should just increment it to 6
again somewhere in the very far future.
wlan(4) interfaces. vlan(4) interfaces are listed via a new 'vlans_<IF>'
variable. If a vlan interface is a number, then that number is treated as
the vlan tag for the interface and the interface will be named '<IF>.<tag>'.
Otherwise, the vlan tag must be provided via a vlan parameter in a
'create_args_<vlan>' variable.
While I'm here, fix a few nits in rc.conf(5) and mention create_args_<IF> in
the description of cloned_interfaces.
Reviewed by: brooks
MFC after: 2 weeks
it mentioned only VT6122. While I'm here remove the mention of
VT3119 which seems to be VIA's internal model name and VT3119
wouldn't be available to end users.
Reviewed by: brueffer
This tunable allows one to enable (1) or disable (0) gestures like tap
and tap-hold on Synaptics TouchPad when the Extended mode isn't enabled
(ie. "hw.psm.synaptics_support" not set).
By default, the value is -1 in order to keep the current behaviour of
not enabling/disabling gestures explicitly.
PR: kern/139272
Submitted by: David Horn <dhorn2000 AT gmail DOT com>
Reviewed by: David Horn <dhorn2000 AT gmail DOT com>
exiting a pager, vi, etc.
Add some example xterm*-clear entries to the termcap files to make
it easier for people to enable that behavior.
Document the examples in the man page to make them easier to find.
sxlock, via the sx_{s, x}lock_sig() interface, or plain lockmgr), will
leave the waiters flag on forcing the owner to do a wakeup even when if
the waiter queue is empty.
That operation may lead to a deadlock in the case of doing a fake wakeup
on the "preferred" (based on the wakeup algorithm) queue while the other
queue has real waiters on it, because nobody is going to wakeup the 2nd
queue waiters and they will sleep indefinitively.
A similar bug, is present, for lockmgr in the case the waiters are
sleeping with LK_SLEEPFAIL on. In this case, even if the waiters queue
is not empty, the waiters won't progress after being awake but they will
just fail, still not taking care of the 2nd queue waiters (as instead the
lock owned doing the wakeup would expect).
In order to fix this bug in a cheap way (without adding too much locking
and complicating too much the semantic) add a sleepqueue interface which
does report the actual number of waiters on a specified queue of a
waitchannel (sleepq_sleepcnt()) and use it in order to determine if the
exclusive waiters (or shared waiters) are actually present on the lockmgr
(or sx) before to give them precedence in the wakeup algorithm.
This fix alone, however doesn't solve the LK_SLEEPFAIL bug. In order to
cope with it, add the tracking of how many exclusive LK_SLEEPFAIL waiters
a lockmgr has and if all the waiters on the exclusive waiters queue are
LK_SLEEPFAIL just wake both queues.
The sleepq_sleepcnt() introduction and ABI breakage require
__FreeBSD_version bumping.
Reported by: avg, kib, pho
Reviewed by: kib
Tested by: pho
It turns out these entries do make Terminal.app behave a little better.
According to Thomas Dickey, Terminal.app should use TERM=nsterm anyway,
but we don't support this yet. Already having an improved termcap entry
helps, so I am going to MFC this change after all.
Suggested by: Leonidas Tsampros <ltsampros upnet gr>
MFC after: 1 month
cleanilinks wasn't listed in <bsd.subdir.mk>. Instead of adding it to
/sys/modules/Makefile, we'd better just add it to <bsd.subdir.mk>
directly, so we don't need to change files like /sys/modules/sound/Makefile
as well. This means you can finally clean up all those dangling symlinks
created by individual module compilation at once.
One of the things I really want to do, is to get rid of the limitations
of our current utmp(5) mechanism:
- It only allows 8 byte TTY device names.
- The hostname only allows 16 bytes of storage.
I'm not a big fan of <utmpx.h>, but I think we should at least try to
add parts of it. Unfortunately we cannot implement <utmpx.h>, because we
miss various fields, such as ut_id, ut_pid, etc. The API provided by
libulog shares some similarities with <utmpx.h>, so it shouldn't be too
hard to port these applications eventually. In most simple cases, it
should just be a matter of removing the ulog_ prefix everywhere.
As a bonus, it also implements a function called ulog_login_pseudo(),
which allows unprivileged applications to write log entries, provided
they have a valid file descriptor to a pseudo-terminal master device.
libulog will allow a smoother transition to a new file format by adding
a library interface to deal with utmp/wtmp/lastlog files. I initially
thought about adding the functionality to libutil, but because I'm not
planning on keeping this library around forever, we'd better keep it
separated.
Next items on the todo list:
1. Port applications in the base system (and ports) to libulog, instead
of letting them use <utmp.h>.
2. Remove <utmp.h>, implement <utmpx.h> and reimplement this library on
top.
3. Port as many applications as possible back to <utmpx.h>.
The hardware is compliant with WDRT specification, so I originally
considered including generic WDRT watchdog support, but decided
against it, because I couldn't find anyone to the code for me.
WDRT seems to be not very popular.
Besides, generic WDRT porbably requires a slightly different driver
approach.
Reviewed by: des, gavin, rpaulo
MFC after: 3 weeks
Right now syscons(4) uses a cons25-style terminal emulator. The
disadvantages of that are:
- Little compatibility with embedded devices with serial interfaces.
- Bad bandwidth efficiency, mainly because of the lack of scrolling
regions.
- A very hard transition path to support for modern character sets like
UTF-8.
Our terminal emulation library, libteken, has been supporting
xterm-style terminal emulation for months, so flip the switch and make
everyone use an xterm-style console driver.
I still have to enable this on i386. Right now pc98 and i386 share the
same /etc/ttys file. I'm not going to switch pc98, because it uses its
own Kanji-capable cons25 emulator.
IMPORTANT: What to do if things go wrong (i.e. graphical artifacts):
- Run the application inside script(1), try to reduce the problem and
send me the log file.
- In the mean time, you can run `vidcontrol -T cons25' and `export
TERM=cons25' so you can run applications the same way you did before.
You can also build your kernel with `options TEKEN_CONS25' to make all
virtual terminals use the cons25 emulator by default.
Discussed on: current@
stepped down some time ago, about the same time as Giorgos Keramidas
joined the team.
PR: 140465
Submitted by: Denny Lin <dennylin93@cnmc32.hs.ntnu.edu.tw>
MFC after: 2 weeks
- Three Australian stations in Antarctica have changed their time zone:
Casey moved from UTC+8 to UTC+11
Davis moved from UTC+7 to UTC+5
Mawson moved from UTC+6 to UTC+5
The changes occurred on 2009-10-18 at 02:00 (local times).
MFC after: 3 days
attach chips with generic Marvell (non-HighPoint) PCI identification.
These chips are also supported by ata(4). Some vendors, like Supermicro,
are using same chips without providing HPT RAID BIOS.
PR: kern/120842, kern/136750
- ANSIfy prototypes;
- Add __unused for parameters that is not being currently used;
- Add a header for subrountines being called from other modules.
Reviewed by: mjacob
- New region: Asia/Novokuznetsk
- Kemerovo oblast' (Kemerovo region) in Russia will change current
time zone on 29 March 2010
- Add historical data for Hongkong 1941 - 1980
- Syria will go to winter time in the last weekend of October 2009.
MFC after: 2 days
