Make it less confusing when, for example, stat sets errno to 122 because a
checksum failed in ZFS:
Before: getfacl: /foo/bar: stat() failed: Unknown error: 122
After: getfacl: /foo/bar: stat() failed: Integrity check failed
Submitted by: Ryan Moeller <ryan@ixsystems.com>
Reviewed by: mckusick, mav
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D22973
Having a reserved vnode count does not guarantee that getnewvnodes wont
block later. Said blocking partially defeats the purpose of reserving in
the first place.
Preallocate instaed. The only consumer was always passing "1" as count
and never nesting reservations.
Filesystems which want to use it in limited capacity can employ the
VOP_UNLOCK_FLAGS macro.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D21427
This is a lock-based emulation of 64-bit atomics for kernel use, split off
from an earlier patch by jhibbits.
This is needed to unblock future improvements that reduce the need for
locking on 64-bit platforms by using atomic updates.
The implementation allows for future integration with userland atomic64,
but as that implies going through sysarch for every use, the current
status quo of userland doing its own locking may be for the best.
Submitted by: jhibbits (original patch), kevans (mips bits)
Reviewed by: jhibbits, jeff, kevans
Differential Revision: https://reviews.freebsd.org/D22976
With the previous reviews, the page lock is no longer required in order
to perform queue operations on a page. It is also no longer needed in
the page queue scans. This change effectively eliminates remaining uses
of the page lock and also the false sharing caused by multiple pages
sharing a page lock.
Reviewed by: jeff
Tested by: pho
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D22885
In some cases the pool discovery will get stuck in infinite loop while setting
up the vdev children.
To fix, we split the vdev setup into two parts, first we create vdevs based on
configuration we do get from pool label, then, we process pool config from MOS
and update the pool config if needed.
Testing done: confirm previously hung loader is not hung any more.
MFC after: 1 week
Eliminate recursion from most thread_lock consumers. Return from
sched_add() without the thread_lock held. This eliminates unnecessary
atomics and lock word loads as well as reducing the hold time for
scheduler locks. This will eventually allow for lockless remote adds.
Discussed with: kib
Reviewed by: jhb
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22626
Both of these features are not needed by many consumers and result in avoidable
reads which in turn puts them on profiles due to cache-line ping ponging.
On top of that the current lockgmr entry point is slower than necessary
single-threaded. As an attempted clean up preparing for other changes,
provide new routines which don't support any of the aforementioned features.
With these patches in place vop_stdlock and vop_stdunlock disappear from
flamegraphs during -j 104 buildkernel.
Reviewed by: jeff (previous version)
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22665
The current vnode layout is not smp-friendly by having frequently read data
avoidably sharing cachelines with very frequently modified fields. In
particular v_iflag inspected for VI_DOOMED can be found in the same line with
v_usecount. Instead make it available in the same cacheline as the v_op, v_data
and v_type which all get read all the time.
v_type is avoidably 4 bytes while the necessary data will easily fit in 1.
Shrinking it frees up 3 bytes, 2 of which get used here to introduce a new
flag field with a new value: VIRF_DOOMED.
Reviewed by: kib, jeff
Differential Revision: https://reviews.freebsd.org/D22715
vn_open_cred() assumes that it is called from the top-level of a VFS
syscall. Writers must call bwillwrite() before locking any VFS
resource to wait for cleanup of dirty buffers.
ZFS getextattr() and setextattr() VOPs do call vn_open_cred(), which
results in wait for unrelated buffers while owning ZFS vnode lock (and
ZFS does not use buffer cache). VN_OPEN_INVFS allows caller to skip
bwillwrite.
Note that ZFS is still incorrect there, because it starts write on an
mp and locks a vnode while holding another vnode lock.
Reported by: Willem Jan Withagen <wjw@digiware.nl>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In case L2ARC read failed, l2arc_read_done() creates _different_ ZIO
to read data from the original storage device. Unfortunately pointer
to the failed ZIO remains in hdr->b_l1hdr.b_acb->acb_zio_head, and if
some other read try to bump the ZIO priority, it will crash.
The problem is reproducible by corrupting L2ARC content and reading
some data with prefetch if l2arc_noprefetch tunable is changed to 0.
With the default setting the issue is probably not reproducible now.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
illumos/illumos-gate@555d674d5d555d674d5dhttps://www.illumos.org/issues/10592
This is a collection of recent fixes from ZoL:
8eef997679b Error path in metaslab_load_impl() forgets to drop ms_sync_lock
928e8ad47d3 Introduce auxiliary metaslab histograms
425d3237ee8 Get rid of space_map_update() for ms_synced_length
6c926f426a2 Simplify log vdev removal code
21e7cf5da89 zdb -L should skip leak detection altogether
df72b8bebe0 Rename range_tree_verify to range_tree_verify_not_present
75058f33034 Remove unused vdev_t fields
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
MFC after: 4 weeks
illumos/illumos-gate@663207adb1663207adb1
10601 Pool allocation classes
https://www.illumos.org/issues/10601
illumos port of ZoL Pool allocation classes. Includes at least these two
commits:
441709695 Pool allocation classes misplacing small file blocks
cc99f275a Pool allocation classes
10757 Add -gLp to zpool subcommands for alt vdev names
https://www.illumos.org/issues/10757
Port from ZoL of
d2f3e292d Add -gLp to zpool subcommands for alt vdev names
Note that a subsequent ZoL commit changed -p to -P
a77f29f93 Change full path subcommand flag from -p to -P
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Portions contributed by: Håkan Johansson <f96hajo@chalmers.se>
Portions contributed by: Richard Yao <ryao@gentoo.org>
Portions contributed by: Chunwei Chen <david.chen@nutanix.com>
Portions contributed by: loli10K <ezomori.nozomu@gmail.com>
Author: Don Brady <don.brady@delphix.com>
11541 allocation_classes feature must be enabled to add log device
illumos/illumos-gate@c1064fd7cec1064fd7cehttps://www.illumos.org/issues/11541
After the allocation_classes feature was integrated, one can no longer add a
log device to a pool unless that feature is enabled. There is an explicit check
for this, but it is unnecessary in the case of log devices, so we should handle
this better instead of forcing the feature to be enabled.
Author: Jerry Jelinek <jerry.jelinek@joyent.com>
FreeBSD notes.
I faithfully added the new -g, -L, -P flags, but only -g does something:
vdev GUIDs are displayed instead of device names. -L, resolve symlinks,
and -P, display full disk paths, do nothing at the moment.
The use of special vdevs is backward compatible for read-only access, so
root pools should be bootable, but exercise caution.
MFC after: 4 weeks
10499 Multi-modifier protection (MMP)
illumos/illumos-gate@e0f1c0afa4e0f1c0afa4https://www.illumos.org/issues/10499
Port the following ZFS commits from ZoL to illumos.
379ca9cf2 Multi-modifier protection (MMP)
bbffb59ef Fix multihost stale cache file import
0d398b256 Do not initiate MMP writes while pool is suspended
10701 Correct lock ASSERTs in vdev_label_read/write
illumos/illumos-gate@58447f688d58447f688dhttps://www.illumos.org/issues/10701
Port of ZoL commit:
0091d66f4e Correct lock ASSERTs in vdev_label_read/write
At a minimum, this fixes a blown assert during an MMP test run when running on
a DEBUG build.
11770 additional mmp fixes
illumos/illumos-gate@4348eb90124348eb9012https://www.illumos.org/issues/11770
Port a few additional MMP fixes from ZoL that came in after our
initial MMP port.
4ca457b065 ZTS: Fix mmp_interval failure
ca95f70dff zpool import progress kstat
(only minimal changes from above can be pulled in right now)
060f0226e6 MMP interval and fail_intervals in uberblock
Note from the committer (me).
I do not have any use for this feature and I have not tested it. I only
did smoke testing with multihost=off.
Please be aware.
I merged the code only to make future merges easier.
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Portions contributed by: Tim Chase <tim@chase2k.com>
Portions contributed by: sanjeevbagewadi <sanjeev.bagewadi@gmail.com>
Portions contributed by: John L. Hammond <john.hammond@intel.com>
Portions contributed by: Giuseppe Di Natale <dinatale2@llnl.gov>
Portions contributed by: Prakash Surya <surya1@llnl.gov>
Portions contributed by: Brian Behlendorf <behlendorf1@llnl.gov>
Author: Olaf Faaland <faaland1@llnl.gov>
MFC after: 4 weeks
illumos/illumos-gate@9c2acf00e29c2acf00e2https://www.illumos.org/issues/10554
During the port of MMP (illumos bug 10499) from ZoL, I found this
earlier ZoL project is a prerequisite. Here is the original
description. This addition will enable us to sync an open TXG to the
main pool on demand. The functionality is similar to 'sync(2)' but
'zpool sync' will return when data has hit the main storage instead of
potentially just the ZIL as is the case with the 'sync(2)' cmd.
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Author: Alek Pinchuk <apinchuk@datto.com>
MFC after: 3 weeks
Relnotes: possibly
I overlooked the fact that zfsproc is required by dtrace modules that
use illumos compatible taskq KPI. So, move the symbol definition to
the opensolaris module that provides compatibility support for both ZFS
and DTrace. Also, rename zfsproc to system_proc to reflect that it is
not specific to ZFS.
Reported by: ae
MFC after: 5 weeks
X-MFC with: ae
The purpose of this change is to group kernelthreads specific to a
particular ZFS pool under a kernel process. There can be many dozens of
threads per pool. This change improves observability of those threads.
This change consists of several subchanges:
1. illumos taskq_create_proc can now pass its process parameter to
taskqueue. Also, use zfsproc instead of NULL for taskq_create. Caveat:
zfsproc might not be initialized yet. But in that case it is still NULL,
so not worse than before.
2. illumos sys/proc.h: kthread id is stored in t_did field, not t_tid.
3. zfs: enable SPA_PROCESS on the kernel side. The change is a bit hairy
as newproc() is implemented privately to spa.c. I couldn't think of a
better way to populate process name than to poke inside the argument for
the process routine.
4. illumos thread_create: allow assigning thread to process other than
zfsproc.
5. zfs: expose spa_proc to other users, assign sync and quiesce threads
to it.
Pool-specific threads created using (relatively new) zthr mechanism are
still assigned to the zfskern process rather than to a respective
zpool-xxx process. I am going to address this a bit later.
Reviewed by: no one
MFC after: 5 weeks
Relnotes: perhaps
Differential Revision: https://reviews.freebsd.org/D9720
Since physical device asize is calculated from psize and the asize is stored
in pool label, we can use asize to set the value of psize, which is used to
calculate the location of the pool labels.
MFC after: 1 week
Port illumos change: https://www.illumos.org/issues/11667
Move lz4.c out of zfs tree to opensolaris/common/lz4, adjust it to be
usable from kernel/stand/userland builds, so we can use just one single
source. Add lz4.h to declare lz4_compress() and lz4_decompress().
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D22037
The previous code came from OpenSolaris, which in my understanding require
allocation size to be known to free memory. To store that size previous
code allocated additional 8 byte header. But I have noticed that zlib
with present settings allocates 64KB context buffers for each call, that
could be efficiently cached by UMA, but addition of those 8 bytes makes
them fall back to physical RAM allocations, that cause huge overhead and
lock congestion on small blocks. Since FreeBSD's free() does not have
the size argument, switching to it solves the problem, increasing write
speed to ZVOLs with 4KB block size and GZIP compression on my 40-threads
test system from ~60MB/s to ~600MB/s.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
This patch modifies the zfs_ioc_snapshot_list_next() ioctl to enable it
to take input parameters that alter the way looping through the list of
snapshots is performed. The idea here is to restrict functions that
throw away some of the snapshots returned by the ioctl to a range of
snapshots that these functions actually use. This improves efficiency
and execution speed for some rollback and send operations.
Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Signed-off-by: Alek Pinchuk <apinchuk@datto.com>
Closes#8077zfsonlinux/zfs@4c0883fb4a
MFC after: 2 weeks
except for filesystems that set the MNTK_VMSETSIZE_BUG, Set the flag for ZFS.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D21883
illumos/illumos-gate@c4ab0d3f46c4ab0d3f46https://www.illumos.org/issues/10809
Port ZoL ee36c709c3d Performance optimization of AVL tree comparator functions
This is a followup to r337567 that imported the ZoL commit directly into
FreeBSD. It seems that at the time we did not have some of the earlier
changes, so some pieces of the ZoL change were not applicable. Also,
the illumos version got a few style cleanups. Some changes were missed
or incorrectly merged (e.g., vdev_cache_lastused_compare and
metaslab_rangesize_compare).
Obtained from: ZoL, illumos
MFC after: 25 days
X-MFC after: r353634
illumos/illumos-gate@7931524763
FreeBSD note: some tweaking was needed to avoid a conflict with
sys/rangelock.h.
Author: Matthew Ahrens <mahrens@delphix.com>
Obtained from: illumos
MFC after: 3 weeks
illumos/illumos-gate@52abb70e0752abb70e07https://www.illumos.org/issues/9691
When iterating over a ZAP object, we're almost always certain to
iterate over the entire object. If there are multiple leaf blocks, we
can realize a performance win by issuing reads for all the leaf blocks
in parallel when the iteration begins.
For example, if we have 10,000 snapshots, "zfs destroy -nv
pool/fs@1%9999" can take 30 minutes when the cache is cold. This
change provides a >3x performance improvement, by issuing the reads
for all ~64 blocks of each ZAP object in parallel.
Author: Matthew Ahrens <mahrens@delphix.com>
Obtained from: illumos
MFC after: 2 weeks
illumos/illumos-gate@d0cb1fb926d0cb1fb926https://www.illumos.org/issues/9425
Problem Statement
ZFS Channel program scripts currently require a timeout, so that hung
or long-running scripts return a timeout error instead of causing ZFS
to get wedged. This limit can currently be set up to 100 million Lua
instructions. Even with a limit in place, it would be desirable to
have a sys admin (support engineer) be able to cancel a script that is
taking a long time.
Proposed Solution
Make it possible to abort a channel program by sending an interrupt
signal.In the underlying txg_wait_sync function, switch the cv_wait to
a cv_wait_sig to catch the signal. Once a signal is encountered, the
dsl_sync_task function can install a Lua hook that will get called
before the Lua interpreter executes a new line of code. The
dsl_sync_task can resume with a standard txg_wait_sync call and wait
for the txg to complete. Meanwhile, the hook will abort the script and
indicate that the channel program was canceled. The kernel returns a
EINTR to indicate that the channel program run was canceled.
FreeBSD note: the return value of cv_wait_sig() has inverted meaning
between us and illumos.
Author: Don Brady <don.brady@delphix.com>
Obtained from: illumos
MFC after: 4 weeks
illumos/illumos-gate@a0b03b161ca0b03b161chttps://www.illumos.org/issues/10330
3 recent ZoL changes in the vdev and metaslab code which we can pull over:
PR 8324 c853f382db 8324 Change target size of metaslabs from 256GB to 16GB
PR 8290 b194fab0fb 8290 Factor metaslab_load_wait() in metaslab_load()
PR 8286 419ba59145 8286 Update vdev_is_spacemap_addressable() for new spacemap
encoding
Author: Serapheim Dimitropoulos <serapheimd@gmail.com>
Obtained from: illumos, ZoL
MFC after: 2 weeks
illumos/illumos-gate@e914ace2e9e914ace2e9https://www.illumos.org/issues/10343
On the openzfs feature/porting matrix, this is listed as:
prefix to refcount funcs/types
Having these changes will make it easier to share other work across the
different ZFS operating systems.
PR 7963 424fd7c3e Prefix all refcount functions with zfs_
PR 7885 & 7932 c13060e47 Linux 4.19-rc3+ compat: Remove refcount_t compat
PR 5823 & 5842 4859fe796 Linux 4.11 compat: avoid refcount_t name conflict
Author: Tim Schumacher <timschumi@gmx.de>
Obtained from: illumos, ZoL
MFC after: 3 weeks
illumos/illumos-gate@aa02ea0194aa02ea0194
10572 Fix race in dnode_check_slots_free()
https://www.illumos.org/issues/10572
The Fix from ZoL:
Currently, dnode_check_slots_free() works by checking dn->dn_type
in the dnode to determine if the dnode is reclaimable. However,
there is a small window of time between dnode_free_sync() in the
first call to dsl_dataset_sync() and when the useraccounting code
is run when the type is set DMU_OT_NONE, but the dnode is not yet
evictable, leading to crashes. This patch adds the ability for
dnodes to track which txg they were last dirtied in and adds a
check for this before performing the reclaim.
This patch also corrects several instances when dn_dirty_link was
treated as a list_node_t when it is technically a multilist_node_t.
10579 Don't allow dnode allocation if dn_holds != 0
https://www.illumos.org/issues/10579
The fix from ZoL:
This patch simply fixes a small bug where dnode_hold_impl() could
attempt to allocate a dnode that was in the process of being freed,
but which still had active references. This patch simply adds the
required check.
Author: Tom Caputi <tcaputi@datto.com>
Reported by: delphij
MFC after: 2 weeks
X-MFC with: r353176
