The test code prior to r311893 loaded geom_gate at test start if necessary and
skipped the tests if it couldn't be loaded.
The ATF-ifcation of this test done in r311893 unfortunately dropped this
functionality.
This change restores the geom_gate module load and skips the test(s) if unavailable
in an ATF-like way.
MFC after: 1 month
PR: 220164
Reported by: gjb
Our man pages have always indicated that this was supported, but in fact the
feature was never implemented for lio_listio(2).
Reviewed by: jhb, kib (earlier version)
MFC after: 20 days
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D11680
- Use "atf_check -x 'cmd1 | cmd2'" instead of "cmd1 | atf_check cmd2". The
two forms are idiomatically similar, but subtly different in the sense of
what program invokes the other, and there could be unwanted side effects
of the latter idiom dealing with forking, pipes, etc.
- Remove chmod and instead source coredump_phnum_restore_state.sh directly.
This avoids the need to check the result of the chmod call.
- Fix indentation in an if-block (4 column space indentation -> hard tab).
The testcase no longer fails on ^/head because readelf has established parity
with binutils' copy of readelf.
This issue is not seen on Jenkins because
`test_suites.FreeBSD.allow_sysctl_side_effects` isn't set in kyua.conf on
the CI host, i.e., the test is skipped.
PR: 215019
Tested with: binutils (amd64-binutils-2.28,1); elftoolchain (r3561M)
Remove aio_test's legacy timeout handling and cleanup routines. Instead,
use ATF's builtin capabilities. ATF automatically cleans up newly created
files, too, so we don't have to explicitly unlink them. The only tests than
need a cleanup routine are the md(4) tests, which must destroy their md
device.
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D11468
The summary of changes is as follows..
Generic changes::
- Added configure support [2].
- Check for lchmod filesystem support with create_file(..); for
testcases that require lchmod, skip the testcase -- otherwise
use chmod directly [1].
- Added Travis CI integration [2].
- Added utimensat testcases [1].
Linux support::
- Fixed Linux support to pass on later supported versions of
Fedora/Ubuntu [2].
- Conditionally enable posix_fallocate(2) support [2].
OSX support::
- Fixed compilation on OSX [2].
- Added partial OSX support (the test run isn't fully green yet)
[2].
MFC after: 2 months
Obtained from: https://github.com/pjd/pjdfstest/tree/0.1
Relnotes: yes
Submitted by: asomers [1], ngie [2]
Tested with: UFS, ZFS
The summary of changes is as follows..
Generic changes::
- Added configure support [2].
- Check for lchmod filesystem support with create_file(..); for
testcases that require lchmod, skip the testcase -- otherwise
use chmod directly [1].
- Added Travis CI integration [2].
- Added utimensat testcases [1].
Linux support::
- Fixed Linux support to pass on later supported versions of
Fedora/Ubuntu [2].
- Conditionally enable posix_fallocate(2) support [2].
OSX support::
- Fixed compilation on OSX [2].
- Added partial OSX support (the test run isn't fully green yet)
[2].
Obtained from: https://github.com/pjd/pjdfstest/tree/0.1
Submitted by: asomers [1], ngie [2]
This change implements NOTE_ABSTIME flag for EVFILT_TIMER, which
specifies that the data field contains absolute time to fire the
event.
To make this useful, data member of the struct kevent must be extended
to 64bit. Using the opportunity, I also added ext members. This
changes struct kevent almost to Apple struct kevent64, except I did
not changed type of ident and udata, the later would cause serious API
incompatibilities.
The type of ident was kept uintptr_t since EVFILT_AIO returns a
pointer in this field, and e.g. CHERI is sensitive to the type
(discussed with brooks, jhb).
Unlike Apple kevent64, symbol versioning allows us to claim ABI
compatibility and still name the new syscall kevent(2). Compat shims
are provided for both host native and compat32.
Requested by: bapt
Reviewed by: bapt, brooks, ngie (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D11025
- Refactor kld loading/unloading logic:
-- Use a loop instead of an unrolled one.
-- Check for the module being loaded before trying to load it, to reduce
noise when loading modules that are already loaded.
-- Don't mute stderr from kldload -- it could be potentially useful to
the tester.
-- In the event that the test script was terminated early, it would leave
the modules still attached to the system (which is undesirable).
Always unload the modules at test end with EXIT/SIGINT/SIGTERM so the
system is returned to its former operating state as best possible.
Unload the modules in reverse order, in part for consistency and/or
dependency reasons.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
- `TEST_METADATA.foo` should be `TEST_METADATA.run_tests`: this will unbreak
trying to run the tests on a system without python installed in $PATH.
- The tests require root because they load aesni(4) and/or cryptodev(4) if
not already loaded.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Otherwise, the kernel is free to choose an aribtrary crypto device
rather than the requested device subverting tests that force the use
of a specific device.
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D10762
It was sending only a long's worth (4 or 8 bytes) of data previously
(instead of the entire buffer) via send(2).
MFC after: 1 week
Reported by: Coverity
CID: 1229966, 1229967, 1230004, 1230005
Sponsored by: Dell EMC Isilon
temporary file outside the kyua sandbox
This helps ensure that the file is removed at test exit, and as
a side effect, cures a warning about umasks with Coverity.
MFC after: 3 days
Sponsored by: Dell EMC Isilon
of -1 with err*(3).
An exit code of -1 is implementation defined -- it's best to stick
with something well-defined (1).
MFC after: 3 days
Sponsored by: Dell EMC Isilon
The previous logic was flawed in the sense that it assumed that /dev/md3
was always available. This was a caveat I noted in r306038, that I hadn't
gotten around to solving before now.
Cache the device for the mountpoint after executing mdmfs, then use the
cached value in basic_cleanup(..) when unmounting/disconnecting the md(4)
device.
Apply sed expressions to use reuse logic in the NetBSD code that could
also be applied to FreeBSD, just with different tools.
Differential Revision: D10766
MFC after: 1 week
Reviewed by: bdrewery
Sponsored by: Dell EMC Isilon
These tests have been flapping (failing<->passing) on Jenkins for months.
It passes reliably for me if unsafe AIO is permitted, but it doesn't
pass on Jenkins reliably if unsafe AIO is disabled (the current default).
Mark the tests as requiring unsafe AIO to mitigate the intermittent
failures when unsafe AIO isn't permitted. If the kernel code is changed
to reliably function with md(4) devices using unsafe AIO, this commit can
be reverted.
MFC after: 2 months
PR: 217261
Reported by: Jenkins
Sponsored by: Dell EMC Isilon
These command take an int. The tests work by accident on little-endian,
64-bit systems.
PR: 218919
Tested with: qemu-cheri and CheriBSD built for mips64
Reviewed by: asomers, ngie
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10518
available and if that is true make use of them.
Thank you very much to Andrew Turner for providing help and review the patch!
Reviewed by: andrew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10499
This test was failing if run twice because rtadvd takes too long to die.
The rtadvd process from the first run was still running when the
second run created its interfaces. The solution is to use SIGKILL during
the cleanup instead of SIGTERM so rtadvd will die faster.
While I'm here, randomize the addresses used for the test, which makes bugs
like this easier to spot, and fix the cleanup order to be the opposite of
the setup order
PR: 217871
MFC after: 18 days
X-MFC-With: 315458
Sponsored by: Spectra Logic Corp
A couple of the ptrace tests make assumptions about which thread in a
multithreaded process will run after a halt. This makes the tests less
portable across branches, and susceptible to future breakage. Instead,
twiddle thread scheduling and priorities to match the tests'
expectation.
X-MFC with: r313992
Sponsored by: Dell EMC
sys/netinet6/icmp6.c
Use the interface's FIB for source address selection in ICMPv6 error
responses.
sys/netinet6/in6.c
In in6_newaddrmsg, announce arrival of local addresses on the
interface's FIB only. In in6_lltable_rtcheck, use a per-fib ND6
cache instead of a single cache.
sys/netinet6/in6_src.c
In in6_selectsrc, use the caller's fib instead of the default fib.
In in6_selectsrc_socket, remove a superfluous check.
sys/netinet6/nd6.c
In nd6_lle_event, use the interface's fib for routing socket
messages. In nd6_is_new_addr_neighbor, check all FIBs when trying
to determine whether an address is a neighbor. Also, simplify the
code for point to point interfaces.
sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
Make defrouter_select fib-aware, and make all of its callers pass in
the interface fib.
sys/netinet6/nd6_nbr.c
When inputting a Neighbor Solicitation packet, consider the
interface fib instead of the default fib for DAD. Output NS and
Neighbor Advertisement packets on the correct fib.
sys/netinet6/nd6_rtr.c
Allow installing the same host route on different interfaces in
different FIBs. If rt_add_addr_allfibs=0, only install or delete
the prefix route on the interface fib.
tests/sys/netinet/fibs_test.sh
Clear some expected failures, but add a skip for the newly revealed
BUG217871.
PR: 196361
Submitted by: Erick Turnquist <jhujhiti@adjectivism.org>
Reported by: Jason Healy <jhealy@logn.net>
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9451
The ptrace() user has the option of discarding the signal. In such a
case, p_ptevents should not be modified. If the ptrace() user decides to
send a SIGKILL, ptevents will be cleared in ptracestop(). procfs events
do not have the capability to discard the signal, so continue to clear
the mask in that case.
Reviewed by: jhb (initial revision)
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9939
This change moves the tests added in r313962 to an existing directory
structure used by the geli TAP tests. It also, renames the test from
pbkdf2 to pbkdf2_test .
The changes to ObsoleteFiles.inc are being committed separately as they
aren't needed for the MFC to ^/stable/11, etc, if the MFC for the tests
is done all in one commit.
MFC after: 2 weeks
X-MFC with: r313962, r313972-r313973
Reviewed by: allanjude
Sponsored by: Dell EMC Isilon
Differential Revision: D9985
Suppose a traced process is stopped in ptracestop() due to receipt of a
SIGSTOP signal, and is awaiting orders from the tracing process on how
to handle the signal. Before sending any such orders, the tracing
process exits. This should kill the traced process. But suppose a second
thread handles the SIGKILL and proceeds to exit1(), calling
thread_single(). The first thread will now awaken and will have a chance
to check once more if it should go to sleep due to the SIGSTOP. It must
not sleep after P_SINGLE_EXIT has been set; this would prevent the
SIGKILL from taking effect, leaving a stopped orphan behind after the
tracing process dies.
Also add new tests for this condition.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9890
