Commit Graph

169613 Commits

Author SHA1 Message Date
jchandra
d4b952047c Remove unnecessary 'cat'. 2011-01-10 05:13:06 +00:00
jmallett
d46c373873 o) Expand the CIU driver to be aware of newly-allocated parts of the IRQ range.
o) Add 'octm', a trivial driver for the 10/100 management ports found on some
   Octeon systems.
o) Make the Simple Executive's management port helper routines compile on
   FreeBSD (namely by not doing math on void pointers.)
o) Add a cvmx_mgmt_port_sendm routine to the Simple Executive to send an mbuf
   so there is only one copy in the transmit path, rather than having to first
   copy the mbuf to an intermediate buffer and then copy that to the Simple
   Executive's transmit ring.
o) Properly work out MII addresses of management ports on the Lanner MR-730.
   XXX The MR-730 also needs some patches to the MII read/write routines, but
       this is sufficient for now.  Media detection will be fixed in the future
       when I can spend more time reading the vendor-supplied patches.
2011-01-10 03:48:41 +00:00
dougb
97a7ccf9c1 Revert part of r217071 so that us mere mortals can clearly see
what this bit of code is intended to do. :)

Approved by:	imp
2011-01-09 23:47:11 +00:00
jmallett
ef1dcae0cf Now that we correctly enable rx interrupts on all cores, performance has gotten
quite awful, because e.g. 4 packets will come in and get processed on 4
different cores at the same time, really battling with the TCP stack quite
painfully.  For now, just run one task at a time.

This gets performance up in most cases to where it was before the correctness
fixes that got interrupts to run on all cores (except in high-load TCP transmit
cases where all we're handling receive for is ACKs) and in some cases it's
better now.  What would be ideal would be to use a more advanced interrupt
mitigation strategy and possibly to use different workqueue groups per port for
multi-port systems, and so on, but this is a fine stopgap.
2011-01-09 23:46:24 +00:00
jmallett
db62f5eeb5 o) Remove some unused local definitions of IP protocol numbers.
o) Use CPU_FOREACH rather than a miscrafted for loop with an off-by-one to
   enable workq interrupts on all cores.
2011-01-09 23:05:46 +00:00
jilles
ebbca2a885 sh: Follow-up to r216743, grabstackblock() can be replaced with stalloc().
grabstackblock() was used only once (but it is a very often executed piece
of code).
2011-01-09 22:47:58 +00:00
keramida
4813d86278 regression/date: unset all LC_xxx vars and set LANG/LC_ALL
When running with a custom locale setup, it's easy to confuse the
date regression tests and cause them to fail, e.g. when LANG='C'
but LC_ALL='el_GR.UTF-8'.  Set LC_ALL to 'C', which overrides all
other LC_xxx options, to avoid this sort of problem.

Reviewed by:	uqs, edwin
2011-01-09 22:05:09 +00:00
ed
0cf1767efc Add missing __dead2 to __assert().
__assert() is called when an assertion fails. After printing an error
message, it will call abort(). abort() never returns, hence it has the
__dead2 attribute. Also add this attribute to __assert().

MFC after:	3 weeks
2011-01-09 21:39:46 +00:00
jilles
2a782244a9 sh: Remove special %builtin PATH entry.
All builtins are now always found before a PATH search.

Most ash derivatives have an undocumented feature where the presence of an
entry "%builtin" in $PATH will cause builtins to be checked at that point of
the PATH search, rather than before looking at any directories as documented
in the man page (very old versions do document this feature).

I am removing this feature from sh, as it complicates the code, may violate
expectations (for example, /usr/bin/alias is very close to a forkbomb with
PATH=/usr/bin:%builtin, only /usr/bin/builtin not being another link saves
it) and appears to be unused (all the %builtin google code search finds is
in some sort of ash source code).

Note that aliases and functions took and take precedence above builtins.
Because aliases work on a lexical level they can only ever be overridden on
a lexical level (quoting or preceding 'builtin' or 'command'). Allowing
override of functions via PATH does not really fit in the model of sh and it
would work differently from %builtin if implemented.

Note: POSIX says special builtins are found before functions. We comply to
this because we do not allow functions with the same name as a special
builtin.

Silence from:	freebsd-hackers@ (message sent 20101225)
Discussed with:	dougb
2011-01-09 21:07:30 +00:00
bz
7864be44ec MfP4 CH=185246 [1]:
Add FEATURE() to announce optional VIMAGE.

MFC after:	3 days
[1] for the moment put it in vnet.c.
2011-01-09 20:40:21 +00:00
gavin
05b262e505 Add support for the Zeagle N2iTion3 Dive Computer to uplcom(4). This brings
the list of supported devices in sync with kernel.org git revision
f36ecd5de93e4c85a9e3d25100c6e233155b12e5, and OpenBSD uplcom.c r1.54
2011-01-09 17:40:04 +00:00
gavin
cd61d7146e Sync the list of devices supported by uslcom(4) with Linux, bringing in
all new devices added between our r211022 and their git revision
93ad03d60b5b18897030038234aa2ebae8234748

Also correct a Foxconn entry.

MFC after:	1 week
2011-01-09 17:10:06 +00:00
bz
a8a58759e9 Improve style and wording of comments and sysctl descriptions [1].
Move machdep.ct_debug to debug.clocktime as there was no reason to
actually put it under machdep in r216340.

Submitted by:	bde [1]
MFC after:	3 days
2011-01-09 14:34:56 +00:00
kib
4f8260e700 Move repeated MAXSLP definition from machine/vmparam.h to sys/vmmeter.h.
Update the outdated comments describing MAXSLP and the process
selection algorithm for swap out.

Comments wording and reviewed by:	alc
2011-01-09 12:50:44 +00:00
kib
b2e3ee7d07 Implement the __pthread_map_stacks_exec() for libthr.
Stack creation code is changed to call _rtld_get_stack_prot() to get
the stack protection right. There is a race where thread is created
during dlopen() of dso that requires executable stacks. Then,
_rtld_get_stack_prot() may return PROT_READ | PROT_WRITE, but thread
is still not linked into the thread list. In this case, the callback
misses the thread stack, and rechecks the required protection
afterward.

Reviewed by:	davidxu
2011-01-09 12:38:40 +00:00
jh
13fb4c7594 Replace nfs4 with newnfs in netfs_types. nfs4 was removed in r192578 and
mount(8) has supported newnfs since r192930.

PR:		conf/153655
Submitted by:	Anonymous <swell.k@gmail.com>
MFC after:	3 weeks
2011-01-09 09:21:11 +00:00
adrian
edeb155960 Add missing ar91xx definition for the WMAC reset control. 2011-01-09 06:17:46 +00:00
das
335eded0fb Fix the value for DECIMAL_DIG on UltraSparcs. The previous value of
35 wasn't quite big enough to ensure correct rounding for very-close-
to-halfway cases.
2011-01-09 06:05:48 +00:00
das
b0da71a682 We don't support any floating point types larger than double on
powerpc, so DECIMAL_DIG should be 17.
2011-01-09 06:05:22 +00:00
das
404cc61926 The highest-precision floating point type on ia64 has 64 bits of
precision, so DECIMAL_DIG should be 21, as on i386/amd64.
2011-01-09 06:05:02 +00:00
alc
2ff68e8630 Eliminate a redundant alignment directive on the page locks array. 2011-01-09 04:34:02 +00:00
rmacklem
9a7c4f93a9 Modify readdirplus in the experimental NFS server in a
manner analogous to r216633 for the regular server. This
change busies the file system so that VFS_VGET() is
guaranteed to be using the correct mount point even
during a forced dismount attempt. Since nfsd_fhtovp() is
not called immediately before readdirplus, the patch is
actually a clone of pjd@'s nfs_serv.c.4.patch instead of
the one committed in r216633.

Reviewed by:	kib
MFC after:	10 days
2011-01-09 02:10:54 +00:00
jilles
3a61afec3c sh: Make exit without parameters from EXIT trap POSIX-compliant.
It should use the original exit status, just like falling off the
end of the trap handler.

Outside an EXIT trap, 'exit' is still equivalent to 'exit $?'.
2011-01-08 23:08:13 +00:00
csjp
2801f33bda Change some variables from int to size_t. This is more accurate since
these variables represent sizes in one capacity or another.  There is
no reason to allow negative numbers.  Change userspace shared structure
elements that get used for the modified functions from int to uint32_t,
since it's not clear what userspace programs use these fields, and we
do not want to break binary compatibility.  This fixes a panic when
corrupt or bogus data is passed into the kernel.

Obtained from:	NetBSD
MFC after:	3 weeks
2011-01-08 23:06:54 +00:00
jpaetzel
3e182d5872 Take passwords out of debug log.
Fix path problem that was preventing disk info from being in the log.

PR:	bin/151968
Submitted by:	Kris Moore <kmoore@FreeBSD.org>
Approved by:	imp
2011-01-08 23:03:24 +00:00
jilles
25806c21fc sh: Add simple test for 'exit' without parameters. 2011-01-08 23:00:38 +00:00
alc
a3f4c0274d Eliminate the counting of vm_page_pa_tryrelock calls. We really don't
need it anymore.  Moreover, its implementation had a type mismatch, a
long is not necessarily an uint64_t.  (This mismatch was hidden by
casting.)  Move the remaining two counters up a level in the sysctl
hierarchy.  There is no reason for them to be under the vm.pmap node.

Reviewed by:	kib
2011-01-08 22:45:22 +00:00
jpaetzel
26e5735cfb Push some PC-BSD specific fixes upstream.
PR:	bin/152894
Submitted by:	Kris Moore <kmoore@FreeBSD.org>
Approved by:	imp
2011-01-08 22:42:56 +00:00
deischen
6fbd535b5a Make sure to always do source address selection on
an unbound socket, regardless of any multicast options.
If an address is specified via a multicast option, then
let it override normal the source address selection.

This fixes a bug where source address selection was
not being performed when multicast options were present
but without an interface being specified.

Reviewed by:	bz
MFC after:	1 day
2011-01-08 22:33:46 +00:00
jpaetzel
0ed3bd02d8 More elegant way to detect MBR vs. GPT
Submitted by:	nwhitehorn
Approved by:	imp
2011-01-08 20:25:00 +00:00
nwhitehorn
33ad050e0e Make RB_CDROM work. This should probably check for a disc in cd1 and acd1
as well.
2011-01-08 19:50:13 +00:00
attilio
7a8b4abb97 Revert r216805.
That revision is introducing a bug which is more visible than problems
it is trying to fix.

As long as my time is very limited in this period I am going to
commit back this patch just once it is fully fixed.

Reported by:	dim, Nicholas Esborn
2011-01-08 18:51:15 +00:00
kib
25001a6e2e Use the same expression to report stack protection mode for AT_STACKEXEC
as the expression used by exec_new_vmspace().
2011-01-08 18:41:19 +00:00
tijl
75b3c29fb3 Copy powerpc/include/_inttypes.h to x86 and replace i386/amd64/pc98
headers with stubs.

Approved by:	kib (mentor)
2011-01-08 18:09:48 +00:00
tijl
5003981953 White space changes to align comments. The mips and powerpc _inttypes.h
are now exactly the same.

Approved by:	kib (mentor)
2011-01-08 18:02:46 +00:00
tijl
4bdd0bc803 Rename PRIreg helper macro to PRIptr to better reflect its use. Registers
and pointers don't always have the same size, e.g. the __mips_n32 ABI
(ILP32) has 64 bit registers but 32 bit pointers.

On mips introduce PRIptr to fix the format specifier for (u)intptr_t.

Prefix PRI64 and PRIptr with underscores because macro names starting with
PRI[a-zX] are reserved for future use.

Approved by:	kib (mentor)
2011-01-08 18:00:19 +00:00
kib
6e23841922 Implement __pthread_map_stacks_exec() callback for libc, to change the
stack protection to allow execution for single-threaded processes.
2011-01-08 17:13:43 +00:00
kib
5cec74bed9 In rtld, read the initial stack access mode from AT_STACKPROT as set
by kernel, and parse PT_GNU_STACK phdr from linked and loaded dsos.

If the loaded dso requires executable stack, as specified by PF_X bit
of p_flags of PT_GNU_STACK phdr, but current stack protection does not
permit execution, the __pthread_map_stacks_exec symbol is looked up
and called. It should be implemented in libc or threading library and
change the protection mode of all thread stacks to be executable.

Provide a private interface _rtld_get_stack_prot() to export the stack
access mode as calculated by rtld.

Reviewed by:	   kan
2011-01-08 17:11:49 +00:00
kib
90de4ffc1a In elf image activator, read and apply the stack protection mode from
PT_GNU_STACK program header, if present and enabled. Two new sysctls
are provided, kern.elf32.nxstack and kern.elf64.nxstack, that allow to
enable PT_GNU_STACK for ABIs of specified bitsize, if ABI decided to
support shared page.

Inform rtld about access mode of the stack initial mapping by
AT_STACKPROT aux vector.

At the moment, the default is disabled, waiting for the usermode
support bits.
2011-01-08 16:30:59 +00:00
kib
06eb8de1e1 Create shared (readonly) page. Each ABI may specify the use of page by
setting SV_SHP flag and providing pointer to the vm object and mapping
address. Provide simple allocator to carve space in the page, tailored
to put the code with alignment restrictions.

Enable shared page use for amd64, both native and 32bit FreeBSD
binaries.  Page is private mapped at the top of the user address
space, moving a start of the stack one page down. Move signal
trampoline code from the top of the stack to the shared page.

Reviewed by:	 alc
2011-01-08 16:13:44 +00:00
kib
12d561f88a Collect code to translate between vm_prot_t and p_flags into helper
functions.

MFC after:	1 week
2011-01-08 16:02:14 +00:00
gjb
1108376768 Document rc.conf.d in rc.conf(5).
PR:		140495
Submitted by:	Tom Judge (tom of tomjudge com)
Approved by:	keramida (mentor)
MFC after:	2 weeks
2011-01-08 13:28:43 +00:00
tijl
89281909e1 On mixed 32/64 bit architectures (mips, powerpc) use __LP64__ rather than
architecture macros (__mips_n64, __powerpc64__) when 64 bit types (and
corresponding macros) are different from 32 bit. [1]

Correct the type of INT64_MIN, INT64_MAX and UINT64_MAX.

Define (U)INTMAX_C as an alias for (U)INT64_C matching the type definition
for (u)intmax_t. Do this on all architectures for consistency.

Suggested by:	bde [1]
Approved by:	kib (mentor)
2011-01-08 12:43:05 +00:00
tijl
61d89c0b21 On 32 bit architectures define (u)int64_t as (unsigned) long long instead
of (unsigned) int __attribute__((__mode__(__DI__))). This aligns better
with macros such as (U)INT64_C, (U)INT64_MAX, etc. which assume (u)int64_t
has type (unsigned) long long.

The mode attribute was used because long long wasn't standardised until
C99. Nowadays compilers should support long long and use of the mode
attribute is discouraged according to GCC Internals documentation.

The type definition has to be marked with __extension__ to support
compilation with "-std=c89 -pedantic".

Discussed with:	bde
Approved by:	kib (mentor)
2011-01-08 11:47:55 +00:00
tijl
af03e997ba Fix types of some values in machine/_limits.h.
On some architectures UCHAR_MAX and USHRT_MAX had type unsigned int.
However, lacking integer suffixes for types smaller than int, their type
should correspond to that of an object of type unsigned char (or short)
when used in an expression with objects of type int. In that case unsigned
char (short) are promoted to int (i.e. signed) so the type of UCHAR_MAX and
USHRT_MAX should also be int.

Where MIN/MAX constants implicitly have the correct type the suffix has
been removed.

While here, correct some comments.

Reviewed by:	bde
Approved by:	kib (mentor)
2011-01-08 11:13:34 +00:00
kib
114b45e573 Fix some style(9) issues.
Do not use strlcpy() where simple assignment is enough.

Noted by:	bde (long time ago)
MFC after:	1 week
2011-01-08 11:04:30 +00:00
kib
e98ca05281 Fix struct FILE * leak on error (in disabled by default hesiod support code).
Submitted by:	henning petersen <henning.petersen t-online de>
PR:	153756
MFC after:	1 week
2011-01-08 10:56:58 +00:00
delphij
3cb53d70b9 Use ether_ntoa instead of home-grown version.
Noticed by:	Boris Kochergin <spawk acm poly edu>
2011-01-08 01:57:23 +00:00
bz
07a217f1bd Clarify when we switch from keepidle to keepinvtl intervals if sending
TCP keepalive probes is enabled.

Reviewed by:	gnn
MFC After:	3 days
2011-01-08 00:44:17 +00:00
jilles
742083bfc4 sed: Add test for r217133 (-i race).
PR:		bin/153261
MFC after:	2 weeks
2011-01-08 00:06:22 +00:00