Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18210
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18207
Document the TX_EV_TYPE used for TX completion events corresponding
to CTPIO sends.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18206
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18205
Either cut-through or store-and-forward mode.
Submitted by: Guido Barzini <gbarzini at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18204
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18203
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18202
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18201
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18200
New port mode names are defined for Medford2 and later, and
the existing names are aliased to them. Add comments with the
numeric port mode to clarify the external port modes table.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18199
The event timer interface has changed for Medford2 - for
details see bug66418 comment 9. Update the common code to
use the new timer semantics for Medford2.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18198
Medford2 controllers support control and reporting of
FEC modes for 25G and higher links. See SF-109306-TC
for suggested usage in client code.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18197
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18196
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18195
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18194
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18193
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18192
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18191
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18190
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18189
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18188
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18187
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18186
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18185
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18184
The warning says that it may be usage of possibly uninitialized value.
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18183
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18182
The RX_ECC_ERR flag in RX events was misnamed, as it
reported frame truncation. Use the new RX_TRUNC_ERR
name for this flag.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18181
Book-E kernels really run at VM_MIN_KERNEL_ADDRESS, which currently happens to
be the same as KERNBASE. KERNBASE is the linked address, which the loader also
takes to be the physical load address. Treat KERNBASE as a physical address,
not a virtual, and change virtual address references for KERNBASE to use
something more appropriate.
-msoft-float seems to be insufficient for disabling the SPE on powerpcspe.
Force it off with -mno-spe as well. This prevents a crash in ubldr on
powerpcspe.
pmap_large_unmap() asserts that an unmapping request covers the
entirety of a 2M or 1G page. The logic in the asserts was out of date
with the loop logic. Correct the test to actually check that
destroying the current superpage mapping does not unmap addresses
beyond those requested by the caller.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Reviewed by: alc
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18345
- Remove the complex mechanism to choose between using busdma
and raw pmap_kextract at runtime. The reduced complexity makes
the code easier to read and maintain.
- Fix a bug in the small packet receive path where clusters were
repeatedly mapped but never unmapped. We now store the cluster's
bus address and avoid re-mapping the cluster each time a small
packet is received.
This patch fixes bugs I've seen where ixl(4) will not even
respond to ping without seeing DMAR faults.
I see a small improvement (14%) on packet forwarding tests using
a Haswell based Xeon E5-2697 v3. Olivier sees a small
regression (-3% to -6%) with lower end hardware.
Reviewed by: mmacy
Not objected to by: sbruno
MFC after: 8 weeks
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D17901
Avoid relying on unsigned overflow for the test.
Simplify expressions to avoid duplicate check for the range.
Style.
Add herald comment.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18361
node is set, allow setting security.bsd.unprivileged_proc_debug per-jail.
In part, this is needed to create jails in which the Address Sanitizer
(ASAN) fully works as ASAN utilizes libkvm to inspect the virtual address
space. Instead of having to allow unprivileged process debugging for the
entire system, allow setting it on a per-jail basis.
The sysctl node is still security.bsd.unprivileged_proc_debug and the
jail(8) param is allow.unprivileged_proc_debug. The sysctl code is now a
sysctl proc rather than a sysctl int. This allows us to determine setting
the flag for the corresponding jail (or prison0).
As part of the change, the dynamic allow.* API needed to be modified to
take into account pr_allow flags which may now be disabled in prison0.
This prevents conflicts with new pr_allow flags (like that of vmm(4)) that
are added (and removed) dynamically.
Also teach the jail creation KPI to allow differences for certain pr_allow
flags between the parent and child jail. This can happen when unprivileged
process debugging is disabled in the parent prison, but enabled in the
child.
Submitted by: Shawn Webb <lattera at gmail.com>
Obtained from: HardenedBSD (45b3625edba0f73b3e3890b1ec3d0d1e95fd47e1, deba0b5078cef0faae43cbdafed3035b16587afc, ab21eeb3b4c72f2500987c96ff603ccf3b6e7de8)
Relnotes: yes
Sponsored by: HardenedBSD and G2, Inc
Differential Revision: https://reviews.freebsd.org/D18319
we were looking at the original URL rather than the one we were currently
processing. This meant that if we were trying to retrieve an HTTP URL but
were redirected to an HTTPS URL, and HTTPS proxying was enabled, we would
send an invalid request and most likely get garbage back.
MFC after: 3 days
in gptboot.
When arch-independent geli support was added, a new static 'gdsk' struct
was added, but there was still a static 'dsk' struct, and when you typed
in an alternate disk/partition, the string was parsed into that struct,
which was then never used for anything. Now the string gets parsed into
gdsk.dsk, the struct that's actually used.
X-MFC after: 3 days
After r337820, which "corrected" some spaces-instead-of-tab whitespace
issues in the libkqueue tests, jmg@ pointed out that these files were
originally space-based, not tab-spaced, and so the correction should
have been to get rid of the tabs that had been introduced in previous
changes, not the spaces. This change does that. This is a whitespace
only change; no functional change is intended.
Reported by: jmg@
MFC after: 3 days
Sponsored by: Dell EMC Isilon
from setting the volume serial number. This unbreaks older boot blocks
that don't support serial numbers, and allows boot0cfg to set the serial
number itself if requested by the user.
Submitted by: lev@, yuripv@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17386
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18180
Decode Medford2 FEC stats if available in MAC stats DMA buffer.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18178
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18177
On Medford2 and later the MAC stats buffer has been enlarged.
Use the MAC stats DMA buffer size to ensure that the stats END
generation count is read from the correct location, and that
over-reading of the DMA buffer is prevented.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
Differential Revision: https://reviews.freebsd.org/D18176
