Commit Graph

26 Commits

Author SHA1 Message Date
bms
f9e43f8ad0 Prepare for 802.1p:
Add macro EVL_APPLY_VLID() which may be used to apply an 802.1q VLAN ID
 to the M_VLANTAG field in an mbuf packet header non-destructively.
 This will be used by net80211 to begin with.

 Add macro EVL_APPLY_PRI() which may be used to apply an 802.1p priority
 class to the M_VLANTAG field in an mbuf packet header non-destructively.

 Add other macros for manipulating tags and the CFI bit.

Submitted by:	Boris Kovalenko (EVL_CFIOFTAG(), EVL_MAKETAG())
2007-02-28 22:05:30 +00:00
andre
2d9e7e4a32 Move ethernet VLAN tags from mtags to its own mbuf packet header field
m_pkthdr.ether_vlan.  The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.

Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:

	m->m_pkthdr.ether_vtag = vlan_id;	/* ntohs()? */
	m->m_flags |= M_VLANTAG;

to mark the packet m with the specified VLAN tag.

On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:

	if (m->m_flags & M_VLANTAG) {
		... = m->m_pkthdr.ether_vtag;	/* htons()? */
		... pass tag to hardware ...
	}

VLAN tags are stored in host byte order.  Byte swapping may be necessary.

(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)

Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition.  No more tag
memory allocation have to be done.

Reviewed by:	thompsa, yar
Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-17 13:33:30 +00:00
glebius
19f8b36e66 Merge the //depot/user/yar/vlan branch into CVS. It contains some collective
work by yar, thompsa and myself. The checksum offloading part also involves
work done by Mihail Balikov.

The most important changes:

o   Instead of global linked list of all vlan softc use a per-trunk
  hash. The size of hash is dynamically adjusted, depending on
  number of entries. This changes struct ifnet, replacing counter
  of vlans with a pointer to trunk structure. This change is an
  improvement for setups with big number of VLANs, several interfaces
  and several CPUs. It is a small regression for a setup with a single
  VLAN interface.
    An alternative to dynamic hash is a per-trunk static array with
  4096 entries, which is a compile time option - VLAN_ARRAY. In my
  experiments the array is not an improvement, probably because such
  a big trunk structure doesn't fit into CPU cache.
o   Introduce an UMA zone for VLAN tags. Since drivers depend on it,
  the zone is declared in kern_mbuf.c, not in optional vlan(4) driver.
  This change is a big improvement for any setup utilizing vlan(4).
o   Use rwlock(9) instead of mutex(9) for locking. We are the first
  ones to do this! :)
o   Some drivers can do hardware VLAN tagging + hardware checksum
  offloading. Add an infrastructure for this. Whenever vlan(4) is
  attached to a parent or parent configuration is changed, the flags
  on vlan(4) interface are updated.

In collaboration with:	yar, thompsa
In collaboration with:	Mihail Balikov <mihail.balikov interbgc.com>
2006-01-30 13:45:15 +00:00
glebius
175e16aa4d - Fix VLAN_INPUT_TAG() macro, so that it doesn't touch mtag in
case if memory allocation failed.
- Remove fourth argument from VLAN_INPUT_TAG(), that was used
  incorrectly in almost all drivers. Indicate failure with
  mbuf value of NULL.

In collaboration with:	yongari, ru, sam
2005-12-18 18:24:27 +00:00
yar
a8babb6361 Use VLAN_TAG_VALUE() not only to read a dot1q tag
value from an m_tag, but also to set it.  This reduces
complex code duplication and improves its readability.

Alas, we shouldn't rename the macro to VLAN_TAG_LVALUE()
globally because that would cause pain for kernel module
port maintainers and vendors using FreeBSD as their codebase.
Added a clarifying comment instead.

Discussed with:	ru, glebius
X-MFC-After:	6.0-RELEASE (MFC is good just to reduce the diff)
2005-08-31 11:36:50 +00:00
ru
79c91b9063 Allocate the M_VLANTAG m_pkthdr flag, and use it to indicate that
a packet has VLAN mbuf tag attached.  This is faster to check than
m_tag_locate(), and allows us to use the tags in non-vlan(4) VLAN
producers.

The first argument to VLAN_OUTPUT_TAG() is now unused but retained
for backward compatibility.

While here, embellish a fix in rev. 1.174 of if_ethersubr.c -- it
now checks for packets with VLAN (mbuf) tags, and it should now
be possible to bridge(4) on vlan(4)'s whose parent interfaces
support VLAN decapsulation in hardware.

Reviewed by:	sam
2005-02-18 22:31:19 +00:00
imp
a50ffc2912 /* -> /*- for license, minor formatting changes 2005-01-07 01:45:51 +00:00
yar
f23872a5c5 A network interface driver can support IFCAP_VLAN_MTU only,
without IFCAP_VLAN_HWTAGGING.  The previous version of the
leading comment in this file could lead to the opposite conclusion.

Fix some typos in the comment as well.
2004-01-18 19:29:04 +00:00
sam
2d3799107f backout the switch to use a zone for vlan tags; this requires
vlans be present if any driver with h/w vlan tagging is configured
2004-01-03 03:33:39 +00:00
sam
4b402f6744 switch vlan packet tag allocation to use a private zone 2004-01-02 17:31:51 +00:00
wpaul
28f4067fe0 - In vlan_input(), always mask off all but the VLID bits from tags
extracted from received frames, both in the IFCAP_VLAN_HWTAGGING case
  and not. (Some drivers may already do this masking internally, but
  doing it here doesn't hurt and insures consistency.)

- In vlan_ioctl(), don't let the user set a VLAN ID value with anything
  besides the VLID bits set, otherwise we will have trouble matching
  an interface in vlan_input() later.

PR:		kern/46405
2003-07-08 21:54:20 +00:00
mux
9e54553707 Pass the correct malloc flags to m_tag_alloc(). 2003-03-13 00:30:31 +00:00
imp
cf874b345d Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
alfred
bf8e8a6e8f Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
sam
5852b81f42 o eliminate separate callback interface for h/w tagged input packets; instead
drivers "tag packets" with an m_tag and the input packet handling recognizes
  such packets and does the right thing
o track the number of active vlans on an interface; this lets lots of places
  only do vlan-specific processing when needed
o track changes to ether_ifdetach/ether_ifattach
o track bpf changes
o eliminate the use of M_PROTO1 for communicating to drivers about tagged
  packets
o eliminate the use of IFF_LINK0 for drivers communicating to the vlan code
  that they support h/w tagging; replaced by explicit interface capabilities
o add ifnet capabilities for h/w tagging and support of "large mtu's"
o use new interface capabilities to auto-configure use of large mtu's and h/w
  tagging
o add support for proper handling of promiscuous mode
o document driver/vlan communication conventions

Reviewed by:	many
Approved by:	re
2002-11-14 23:43:16 +00:00
mux
9a5e4c88a3 Simplify the interface cloning framework by handling unit
unit allocation with a bitmap in the generic layer.  This
allows us to get rid of the duplicated rman code in every
clonable interface.

Reviewed by:	brooks
Approved by:	phk
2002-03-11 09:26:07 +00:00
brooks
7da2447808 Make vlan(4) loadable, unloadable, and clonable. As a side effect,
interfaces must now always enable VLAN support.

Reviewed by:	jlemon
MFC after:	3 weeks
2001-09-05 21:10:28 +00:00
fenner
f400013872 Use the IANA assignment IFT_L2VLAN directly instead of indirecting through
a privately #defined IFT_8021_VLAN.

MFC after:	3 days
2001-07-24 00:03:51 +00:00
yar
adae17d5bf Change the type of the VLAN interface from IFT_PROPVIRTUAL,
which was a temporary hack, to IFT_L2VLAN, which is the type
assigned by IANA.
2001-04-04 15:10:58 +00:00
jake
961b97d434 Back out the previous change to the queue(3) interface.
It was not discussed and should probably not happen.

Requested by:		msmith and others
2000-05-26 02:09:24 +00:00
jake
d93fbc9916 Change the way that the queue(3) structures are declared; don't assume that
the type argument to *_HEAD and *_ENTRY is a struct.

Suggested by:	phk
Reviewed by:	phk
Approved by:	mdodd
2000-05-23 20:41:01 +00:00
peter
15b9bcb121 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 04:46:21 +00:00
jkh
ce079123e3 The current code incorrectly assumes that all vlans
are configured, and/or associated with a parent device.  If you
receive a frame for a VLAN that's not in the list, you walk off
the end of the list.  Boom.

Submitted by:	C. Stephen Gunn <csg@waterspout.com>
PR:		15291
1999-12-13 01:57:00 +00:00
peter
3b842d34e8 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
wpaul
a1b49dc152 Grrr... botched remote commit. Let's try this again: vlan updates,
take two.
1999-03-15 01:22:01 +00:00
wollman
ec566039ab Add preliminary support for IEEE 802.1Q VLAN tagging. It doesn't actually
work reliably yet (I've had panics), but it does seem to occasionally
be able to transmit and receive syntactically-correct packets.
Also fixes one of if_ethersubr.c's legion style bugs, and removes
the hostcache code from standard kernels---the code that depends on it
is not going to happen any time soon, I'm afraid.
1998-03-18 01:40:12 +00:00